Special Repair work for FSL Building, Construction of Room For Hydrogen/Nitrogen Bottle, Ground Leveling & IPS Work of Open Ground at Front side of FSL Building, Construction of Sump and Pump Room & Providing, Installing, Testing and Commissioning Fire Fighting System For FSL Building at Junagadh. Dist:Junagadh. (Including Electric work)

Name of Work : Special Repair work for FSL Building, Construction of Room For

Hydrogen/Nitrogen Bottle, Ground Leveling & IPS Work of Open

Ground at Front side of FSL Building, Construction of Sump and

Pump Room & Providing, Installing, Testing and Commissioning Fire

Fighting System For FSL Building at Junagadh. Dist:Junagadh.

(Including Electric work)

:: SCHEDULE B ::

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to

tender for Rs. #REF!

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

1 Demolition including stacking of serviceable materilas and 8.00 Cum 1071.63 Rupees One Thousand

disposal of unserviceable materials with all lead and lift. (i) Seventy One And Paise

R.C.C. work Sixty Three Only

2 Excavation for foundation upto 1.50mt. depth including 14.00 Cum 121.72 Rupees One Hundred

sorting out and stacking of useful materials and disposing of Twenty One And Paise

the excavated stuff upto any lead & Lift. [A] Loose or soft Seventy Two Only

3 Excavation for foundation upto 1.50mt. depth including 54.00 Cum 155.60 Rupees One Hundred Fifty

sorting out and stacking of useful materials and disposing of Five And Paise Sixty Only

the excavated stuff upto any lead & Lift. [B] Dense or Hard

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

4 Excavation for foundation upto 1.50mt. depth including 80.00 Cum 273.50 Rupees Two Hundred

sorting out and stacking of useful materials and disposing of Seventy Three And Paise

the excavated stuff upto any lead & Lift. [D] Soft rock Fifty Only

5 Excavation for foundation 1.50mt. to 3.00mt. depth 45.00 Cum 297.05 Rupees Two Hundred

including sorting out and stacking of useful materials and Ninety Seven And Paise

disposing of the excavated stuff upto any lead & Lift. [D] Five Only

6 Excavation for foundation 3.00mt. to 5.00mt. depth 30.00 Cum 320.60 Rupees Three Hundred

including sorting out and stacking of useful materials and Twenty And Paise Sixty

disposing of the excavated stuff upto any lead & Lift. [D] Only

7 Providing & Laying ordinary Cement Concrete 1:2:4 in 7.00 Cum 3767.61 Rupees Three Thousand

Foundation and Plinth including finishing smooth and curing Seven Hundred Sixty

complete, including cost of formwork and reinforcement. Seven And Paise Sixty

FOUNDATION AND PLINTH. One Only

8 Providing & laying controlled cement concrete M- 10.00 Cum 4722.49 Rupees Four Thousand

250 and finishing smooth with curing etc.complete including Seven Hundred Twenty

the cost of formwork of plywood only with fair finish & Two And Paise Forty Nine

Proping must be of steel only so as to give a fair finish but Only

excluding the cost of reinforcement for R.C.C. work in

Foundation Footing for any cross sectional area at Rate

are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

9 Providing & laying controlled cement concrete M- 250 and 17.00 Cum 9927.74 Rupees Nine Thousand

finishing smooth with curing etc.complete including the cost Nine Hundred Twenty

of formwork of plywood only with fair finish & Proping must Seven And Paise Seventy

be of steel only so as to give a fair finish but excluding the Four Only

cost of reinforcement for R.C.C. work in Wall up to Plinth

level. for any cross sectional area at Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

10 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 120.00 Cum 2742.27 Rupees Two Thousand

coarse sand : 8 graded M\C stone aggrigates of 40 mm Seven Hundred Forty Two

nominal size) curing complete including cost of formwork in And Paise Twenty Seven

FOUNDATION AND PLINTH. Only

11 Brick work using common burnt clay building bricks having 18.00 Cum 4172.60 Rupees Four Thousand

crushing strength not less than 35 Kg/Sq.cm.in foundation One Hundred Seventy Two

and plinth in cement mortar 1:6 (1-cement;6-coarse sand), And Paise Sixty Only

Conventional bricks. Bricks with frog only shall be used.

12 Providing and Laying TMT bar Fe 500 reinforcement of 3520.00 Kg 79.64 Rupees Seventy Nine And

approved brand by GSPHC only for RCC work including Paise Sixty Four Only

cutting, bending, binding and placing in position etc.

comp.for all floors

13 Providing & laying cement concrete 1:1.5:3 and finishing 1.00 Cum 7282.29 Rupees Seven Thousand

smooth with curing etc.complete including the cost of Two Hundred Eighty Two

formwork of plywood only with fair finish & Proping must be And Paise Twenty Nine

of steel only so as to give a fair finish but excluding the cost Only

of reinforcement for R.C.C. work in Plinth Beam for any

cross sectional area at Rate are also Inclusive Of Providing

& Mixing Plastisizer Of Approved Make & In Proportion As

per mix design.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

14 Providing & laying cement concrete 1:1.5:3 and finishing 1.00 Cum 4844.25 Rupees Four Thousand

smooth with curing etc.complete including the cost of Eight Hundred Forty Four

formwork of plywood only with fair finish & Proping must be And Paise Twenty Five

of steel only so as to give a fair finish but excluding the cost Only

of reinforcement for R.C.C. work in Coping for any cross

sectional area at Rate are also Inclusive Of Providing &

Mixing Plastisizer Of Approved Make & In Proportion As per

15 Filling available excavated earth (excluding rock ) in 34.00 Cum 135.56 Rupees One Hundred

trenches, plinth sides of foundation etc. in layers not Thirty Five And Paise Fifty

exceeding 20 cms. in depth consolidation each deposited Six Only

layer by ramming and watering.

16 Filling in foundation and plinth with murrum or selected soil 337.00 Cum 298.79 Rupees Two Hundred

in layers of 20 cm. Thickness including watering, ramming Ninety Eight And Paise

and consolidating etc. complete. Seventy Nine Only

17 Supplying and Filling in plinth with sand under floors 1.00 Cum 477.03 Rupees Four Hundred

including watering, ramming, consolidation and dressing Seventy Seven And Paise

etc.complete. Three Only

18 Applying general insecticide pest control treatment to 9.00 Sqm 38.70 Rupees Thirty Eight And

floors, cup boards etc., including labour, material etc. Paise Seventy Only

19 Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 1.00 Cum 2581.11 Rupees Two Thousand

coarse sand; 10 hand broken stone aggregate 40mm Five Hundred Eighty One

nominal size) and curing complete including cost of form And Paise Eleven Only

work in foundation and plinth.

20 Brick work using common burnt clay building bricks having 6.00 Cum 4451.53 Rupees Four Thousand

crushing strength not less than 35 Kg/Sq.cm.in Ground Four Hundred Fifty One

Floor in cement mortar 1:6 (1-cement;6-coarse sand), And Paise Fifty Three Only

Conventional bricks. Bricks with frog only shall be used.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

21 Providing & laying cement concrete 1:1.5:3 and finishing 0.50 Cum 5871.60 Rupees Five Thousand

smooth with curing etc.complete including the cost of Eight Hundred Seventy

formwork of plywood only with fair finish & Proping must be One And Paise Sixty Only

of steel only so as to give a fair finish but excluding the cost

of reinforcement for R.C.C. work in Lintel for Ground Floor

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

22 Providing & laying cement concrete 1:1.5:3 and finishing 0.50 Cum 5871.60 Rupees Five Thousand

smooth with curing etc.complete including the cost of Eight Hundred Seventy

formwork of plywood only with fair finish & Proping must be One And Paise Sixty Only

of steel only so as to give a fair finish but excluding the cost

of reinforcement for R.C.C. work in Lintel Bend for Ground

Floor Rate are also Inclusive Of Providing & Mixing

Plastisizer Of Approved Make & In Proportion As per mix

23 Providing & laying cement concrete 1:1.5:3 and finishing 0.50 Cum 6215.21 Rupees Six Thousand Two

smooth with curing etc.complete including the cost of Hundred Fifteen And Paise

formwork of plywood only with fair finish & Proping must be Twenty One Only

of steel only so as to give a fair finish but excluding the cost

of reinforcement for R.C.C. work in Chajja for All Floor

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

24 Providing & laying cement concrete 1:1.5:3 and finishing 1.50 Cum 6758.58 Rupees Six Thousand

smooth with curing etc.complete including the cost of Seven Hundred Fifty Eight

formwork but excluding the cost of reinforcement for R.C.C. And Paise Fifty Eight Only

work in SLAB having thickness of 13 cm. and upto

cms. for any cross sectional area at Ground Floor Rate

are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

25 Providing & laying controlled cement concrete M- 250 and 0.50 Cum 9115.42 Rupees Nine Thousand

finishing smooth with curing etc.complete including the cost One Hundred Fifteen And

of formwork of plywood only with fair finish & Proping must Paise Forty Two Only

be of steel only so as to give a fair finish but excluding the

cost of reinforcement for R.C.C. work in Beam. for any

cross sectional area at Ground Floor Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

26 Providing & laying controlled cement concrete M- 250 and 6.50 Cum 7735.86 Rupees Seven Thousand

finishing smooth with curing etc.complete including the cost Seven Hundred Thirty Five

of formwork but excluding the cost of reinforcement for And Paise Eighty Six Only

R.C.C. work in SLAB having thickness of 10 cm. and

upto 13 cms. for any cross sectional area at Ground Floor

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

27 Providing & laying controlled cement concrete M- 250 and 0.70 Cum 6147.05 Rupees Six Thousand One

finishing smooth with curing etc.complete including the cost Hundred Forty Seven And

of formwork of plywood only with fair finish & Proping must Paise Five Only

be of steel only so as to give a fair finish but excluding the

cost of reinforcement for R.C.C. work in LINTEL Bend for

any cross sectional area at GROUND FLOOR.Rate are also

Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As per mix design.

28 P & L ordinary Cement Concrete Flooring 1:2:4 laid in one 1197.00 Sqm 335.72 Rupees Three Hundred

layer and finished with a floating coat of neat cement. (B) Thirty Five And Paise

50mm thick. Seventy Two Only

29 Removing & Scraping of old Deteriorated plaster of any 373.00 Sqm 19.69 Rupees Nineteen And

thickness from wall/R.C.C. member including stacking of Paise Sixty Nine Only

serviceable material and disposal of unserviceable from site

of work with all.

30 Dismentaling tiled of stone floors laid in mortar including 132.00 Sqm 48.63 Rupees Forty Eight And

stacking of serviceable materilas and disposal of Paise Sixty Three Only

unserviceable materials with all lead and lift.

31 Dismantling santtary fittings like wash basin . W.C. pan 16.00 No 410.13 Rupees Four Hundred Ten

Indian and European type, flushing tank etc. including And Paise Thirteen Only

stacking the materials with all lead and lift.

32 Providing 10mm thick cement plaster in single coat of 372.00 Sqm 316.03 Rupees Three Hundred

interior plastering and finished even and smooth in cement Sixteen And Paise Three

mortar 1:3 (1 cement; 3 sand) and finishing with a floating Only

coat of neat cement slurry including providing and mixing

I.S.I. make water proofing material in cement mortar in

proportion recommended by the manufacturer for ALL

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

33 Providing & laying controlled cement concrete M- 200 and 8.00 Cum 7833.51 Rupees Seven Thousand

finishing smooth with curing etc.complete including the cost Eight Hundred Thirty Three

of formwork but excluding the cost of reinforcement for And Paise Fifty One Only

R.C.C. work in SLAB having thickness of 13 cm. and

upto 15 cms. for any cross sectional area at Fifth Floor

Rate are also Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design.

34 Providing & laying controlled cement concrete M- 200 and 2.00 Cum 9285.12 Rupees Nine Thousand

finishing smooth with curing etc.complete including the cost Two Hundred Eighty Five

of formwork of plywood only with fair finish & Proping must And Paise Twelve Only

be of steel only so as to give a fair finish but excluding the

cost of reinforcement for R.C.C. work in Beam. for any

cross sectional area at Fifth Floor Rate are also Inclusive

Of Providing & Mixing Plastisizer Of Approved Make & In

Proportion As per mix design.

35 Providing and laying acrylic base (zycosil) equvivalant water 279.00 Sqm 110.70 Rupees One Hundred Ten

proofing paint in two coats to vertical and horizontal surface And Paise Seventy Only

of depressed portion of bath and W.C. as directed by

engineer -in- charge. This treatement shall be carried out

over and above water proofing cement plaster

36 Providing CEMENT VATA ( 10 cm. x 10 cm. )size quarter 269.00 Rmt 24.04 Rupees Twenty Four And

round in cement mortar 1:1 including neat cement finishing, Paise Four Only

watering etc.complete

37 Suppllying and filling cinder in sunk portion for all lead and 18.00 Cum 791.69 Rupees Seven Hundred

lift etc. complete Ninety One And Paise

Sixty Nine Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

38 Providing and laying integrated cement based proprietary 9.00 Sqm 713.97 Rupees Seven Hundred

water proofing treatment of required thickness over the roof Thirteen And Paise Ninety

including providing and applying two coat of Acrylic polymer Seven Only

of approved brand & manufactures and china mosaic fitting

and finally finishing the surface with white cement slurry and

sloping out terrace slabs with following specification laid to

required slope not flotter than 1 : 80 (incl treating the vertical

surface of the perapet wall upto 20cms height above

finished level of terracing including finishing, curing, testing

etc. comp. Rate is incl. Ten years performance of guarantee

bond to be given on stamp paper. (No extra shall be paid for

increase in thickness for proper slope).

(a) Applying two coats of Acrylic based polymer of approved

brand & manufacture as per recomodation of manufacturer

over the R.C.C. Slab incl. clearing the surface before

(b) Finishing the surface with China Mosaic pieces laid on

10mm thick joint less cement mortar of mix 1:3 (1 cement :

coarse sand) admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the

surface with trowel with neat cement slurry.

(c) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing for final test.All

above operations to be done in order and as directed and

specified by the engineer - in - charge.

39 Providing and laying ordinary Cement Concrete 1:2:4 22.00 Cum 3849.97 Rupees Three Thousand

including finishing smooth and curing complete, including Eight Hundred Forty Nine

cost of formwork but excluding cost of reinforcement. For all And Paise Ninety Seven

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

40 Providing and laying white glazed tiles 8mm thick in flooring 176.00 Sqm 859.95 Rupees Eight Hundred

treads of steps and landing laid on a bed of 12mm thick Fifty Nine And Paise Ninety

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with Five Only

flush pointing in white cement.

41 Providing and laying white glazed tiles 8mm thick in Skirting 219.00 Sqm 1116.32 Rupees One Thousand

riser of steps and dado laid on 10mm thick cement mortar One Hundred Sixteen And

1:3 (1-cement : 3-coarse sand ) and jointed with white Paise Thirty Two Only

42 Providing 10 mm thick cement PLASTER in single coat on 72.00 Sqm 220.13 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Twenty And Paise Thirteen

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Only

floating coat of neat cement slurry at GROUND FLOOR

43 Provinding 15 mm thick cement PLASTER in single coat on 128.00 Sqm 220.46 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Twenty And Paise Forty

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Six Only

finishing with floating coat of neat cement slurry at

44 Providing 10 mm thick cement PLASTER in single coat on 44.00 Sqm 246.61 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Forty Six And Paise Sixty

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a One Only

floating coat of neat cement slurry at FIRST FLOOR.

45 Provinding 15 mm thick cement PLASTER in single coat on 47.00 Sqm 248.93 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Forty Eight And Paise

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Ninety Three Only

finishing with floating coat of neat cement slurry at FIRST

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

46 Providing 10 mm thick cement PLASTER in single coat on 44.00 Sqm 273.09 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Seventy Three And Paise

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Nine Only

floating coat of neat cement slurry at SECOND FLOOR.

47 Provinding 15 mm thick cement PLASTER in single coat on 43.00 Sqm 277.40 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Seventy Seven And Paise

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Forty Only

finishing with floating coat of neat cement slurry at

48 Providing 10 mm thick cement PLASTER in single coat on 59.00 Sqm 299.57 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Ninety Nine And Paise Fifty

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Seven Only

floating coat of neat cement slurry at THIRD FLOOR.

49 Provinding 15 mm thick cement PLASTER in single coat on 107.00 Sqm 305.87 Rupees Three Hundred

brick or concrete wall for interior plastering and finished even Five And Paise Eighty

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Seven Only

finishing with floating coat of neat cement slurry at THIRD

50 Provinding 20 mm thick SAND FACED cement PLASTER on 394.00 Sqm 339.02 Rupees Three Hundred

walls above ground level consisting 12 mm thick backing Thirty Nine And Paise Two

coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock Only

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc.

Complete for any height.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

51 Providing and Fixing Granite of Telephonic Black Colour 2.00 Sqm 2428.00 Rupees Two Thousand

15 to 18mm thick for jambs and sills of doors & Four Hundred Twenty

windows using neat cement slurry laid over 20 mm average Eight Only

base of cement mortar 1:1 (1 cement:1 Coarse Sand) and

jointed with grey cement slurry including racking (Tancha

Work) rubbing and polishing, scaffoldings, tools and tackles,

scaffolding etc. complete. (with base of neat cement) as per

direction of Engineer in charge including rounding the

exposed edges as directed etc. Complete for ALL FLOORS.

52 Providing and fixing both side polished machine cut KOTA 192.00 Sqm 793.90 Rupees Seven Hundred

STONE shelve/ partition 20mm to 25mm thick embaded in Ninety Three And Paise

to wall at support including racking and finishing smooth the Ninety Only

surface including cutting the stone as and where required

etc. complete including rounding of exposed edges etc.

53 Providing and laying 25mm thick Double Pre Polished 19.00 Sqm 1108.30 Rupees One Thousand

(Dimond Polished) Kota Stone Slab Flooring over 20mm One Hundred Eight And

average thick base of cement mortar 1:6 ( 1 cement : 6 Paise Thirty Only

coarse sand) laid over & jointed with grey cement slurry

including rubbing & polishing etc. Complete. for all floors.

54 Providing and laying 25mm thick Double Pre 1.50 Sqm 1197.10 Rupees One Thousand

polished(Dimond Polished) KOTA STONE slab 25mm thick One Hundred Ninety

in RISERS of steps, dedo and pillars laid on 10 mm thick Seven And Paise Ten Only

C.M. 1 :3 ( 1 cement : 3 coarse sand) and jointed with gray

cement slurry inculding rubbing and polishing etc. complete.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

55 Providing & Laying integrated cement based proprietary 18.00 Sqm 890.37 Rupees Eight Hundred

water proofing treatment of required thickness over the roof Ninety And Paise Thirty

including 10mm thick water proofing cement plaster in Seven Only

cement mortar 1:3 and CHINA MOSAIC fitting and finally

finishing the surface with white cement slurry and slopping

out terrace slab with following specification laid to required

slope not flatter than 1:80 (the thickness of water proofing

treatment near rain water outlet or the lowest point of the

finished slope shall not be less than 45mm including treating

the vertical surface of the parapet wall upto 20cms. height

above finished level of terracing including finishing top with

joint less water proofing plaster, curing, testing etc.

completed. Rate is including 10 years performance of

guarantee bond to be given on stamp paper (No extra shall

be paid for increase in thickness for proper slope)

(A) Applying and grouting a slurry coat of neat cement using

2.75 kg/Sqm of cement admixed with proprietary water

proofing compound conforming to IS-2645 over the RCC

slab including cleaning the surface before treatments.

(B) Laying cement concrete using broken bricks bats 25mm

to 40mm size with 50% of cement mortar 1:4 (1cement :

coarse sand) over 10mm thick water proofing cement plaster

in cement mortar of mix 1:3 (1cement : 3 coarse sand)

admixed with proprietary water proofing compound

confirming to IS-2645 to required slope and treating similarly

the adjoining walls upto 200mm height including rounding of

junction of walls.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

(C) After two days of proper curing applying a second coat of

(D) Finishing the surface with china mosaic pieces laid in

10mm thick joint less cement mortar of mix 1:3 (1cement :

coarse sand) admixed with proprietary water proofing

compound confirming to IS-2645 and finally finishing the

surface with trowel with neat cement slurry.

(E) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing for final test.

All above operation to be done in order and as directed and

specified by the engineer in charge.

56 Half brick masonry in common burnt clay building bricks 20.00 Sqm 683.73 Rupees Six Hundred

having crushing strength not less than 35 Kg/Sq.cm. in Eighty Three And Paise

cement mortar 1:4 (1-cement;4-coarse sand) in First Floor, Seventy Three Only

Conventional bricks. Bricks with frog only shall be used.

57 Half brick masonry in common burnt clay building bricks 23.00 Sqm 689.97 Rupees Six Hundred

having crushing strength not less than 35 Kg/Sq.cm. in Eighty Nine And Paise

cement mortar 1:4 (1-cement;4-coarse sand) in Second Ninety Seven Only

Floor, Conventional bricks. Bricks with frog only shall be

58 Half brick masonry in common burnt clay building bricks 46.00 Sqm 696.21 Rupees Six Hundred

having crushing strength not less than 35 Kg/Sq.cm. in Ninety Six And Paise

cement mortar 1:4 (1-cement;4-coarse sand) in Third Floor, Twenty One Only

Conventional bricks. Bricks with frog only shall be used.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

59 Constructing of cooking platform ( sandwich type ) 68cm 24.00 Rmt 3797.65 Rupees Three Thousand

width and 80cm high resting on thick sandwiched polish Seven Hundred Ninety

Granite Slab in C.M 1:3 with providing and fixing 25 mm Seven And Paise Sixty

thick rough kota stone at bottom and 20 to 25 mm thick Five Only

Polish Granite stone ( single piece/ telephonic Black ) top &

Vertical and polished granite stone (single piece/ telephonic

Black ) 20 to 25mm thick on top & 18mm thick in Vertical

with 15mm high machine cut polished granite round

moulded Top facia patty including polishing etc . complete

as per drawing and specification without stainless steel sink

including necessary cutting for sink & making hole for gas

pipe and fixing P.V.C bend of 25mm dia. For All Floors

60 Providing and Fixing Stainless Steel (304 Grade) 1mm thick 20.00 No 4269.00 Rupees Four Thousand

Matt / Satin Finish Kitchen Sink of over all Minimum size Two Hundred Sixty Nine

533mm x 457mm x 203mm deep having bowl Minimum size Only

470mm x 395mm x 203mm Finishing with cement mortar 1:3

(1-Cement : 3-Fine Sand) etc. Complete. Rate including of

32mm dia. C.P. Brass Waste Coupling and 32mm dia. Rigid

PVC Waste Pipe upto N.T. (S.S. Kitchen Sink Shall be of

Material used as per approved make of GSPHCL) for ALL

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

61 Providing, Supplying and Fixing of 32mm (Total) Thick 2.00 Sqm 8407.55 Rupees Eight Thousand

Single Flush Door Shutter with 1mm Thick Laminates on Four Hundred Seven And

Both Side of Shutter. Making / Construction of Flush Door is Paise Fifty Five Only

with Pine or southern Yellow Pine Filler and 2.5mm core

veneer Both Side and 0.4mm Face Veneer on Both Side

with Lock rail on Center. Flush Door Provide with Teak wood

beading patti (32mm X 12mm) on Peripheries of Flush Door

with Door Frame of Non Teak Solid Wood of size 100mm x

60mm with Chemically Treated and Seasoned Including

Paint Matching with Laminates. Frame & Flush door shutter

having 5 year warranty against attack of biological agent like

termite, borers, decay, fungi and harmful insects also

warranty against seasoning related issues like crack,

bending, twisting, warping. Laminates on shutter shall be

press by cold press method. Shutter shall be brought to site

in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is

free from nail mark & any damages etc.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Rates are also Inclusive of all Labors & Proviging 15cm.

Long 8 No of Hold Fast (25mm X 5mm) & 4 No of 6 Inch

S.S. but Hinges, 100mm x 75 mm x 3mm thick, required

Screw & Nails per Frame and Fixing following S.S. Fixtures

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door

Stopper 1 No, 100mm Long, (3) Double Leg Heavy Push

Door Stopper 1 No & (4) Handle 2 No, 150mm Long X

10mm thick. Door are Fixing as per Details Drawing &

Instruction of Engineer in charge. All Materials Used Shall be

as Per approved Material Make List of G.S.P.H.C. The

Required Frame is to be Obtained from Vanil Udhyog Maked

62 Providing and fixing window having extruded aluminum 1.75 Sqm 1568.27 Rupees One Thousand

Colour anodized section frame main outer size 95mm x Five Hundred Sixty Eight

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three And Paise Twenty Seven

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Only

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

63 Providing and fixing pre-cast Rubber Dye inter locking 30.00 Sqm 699.93 Rupees Six Hundred

concrete block 60mm thick with grade of concrete M-300 Ninety Nine And Paise

pnumatic compressed by mechanically pressed and asper Ninety Three Only

approved design including 75mm sand layer for levelling and

filling the joint with sand in proper line and level etc.

64 Providing and laying 24" x 24" Double Charge vitrified 8 to 186.00 Sqm 1513.90 Rupees One Thousand

10 mm thick tile flooring over 20 mm (average) base of Five Hundred Thirteen And

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Paise Ninety Only

surface orfixing on existing flooring by adhesive including

dismentaling of existing flooring and material jointed with

color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade. For All

Floors, material shall be used as per approved make as per

65 Providing and laying 24" x 24" in Skirting riser of steps and 18.00 Sqm 1445.20 Rupees One Thousand

dado Double Charge vitrified 8 to 10 mm thick tile over 10 Four Hundred Forty Five

mm thick Cement plaster of cement mortar 1:3 (1 cement: 3 And Paise Twenty Only

coarse sand) jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for light shade. For All Floors material shall be

used as per approved make as per GSPHC

66 Supply & Installation of Venetian Blinds For Windows :- 44.00 Sqm 2200.00 Rupees Two Thousand

Vertical Louvre Fabric Blinds System with extruded Two Hundred Only

aluminium headrail finished in silver anodized. Operation of

louvers by cord for traverse and chain for rotation.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

67 Providing, Fabricating and fixing M.S. GRILL/GATE of 2410.00 Kg 75.11 Rupees Seventy Five And

approved pattern fabricated from M.S. flat,square bars, Paise Eleven Only

round bars,c-channel, box pipe as per detail Drawings. Rate

is inclusive of welding with grinding smooth surface, two

coats of Oil paint and one coat of yellow Zinc primer coat of

approved brand only. Oil paint shall be Luxol Enamel paint

of Berger Paint india limited. or asian paint apcolite

premium gloss Enamel of asian paint or Dulux premium

gloss enamel of dulux paint and nerolac synthetics enamel

of nerolac paint for all floor and at any height only.

Structural Steel material should be used ISI marked

68 Providing & Fixing soild WPC Cupboard with all necessary 144.00 Sqm 5380.00 Rupees Five Thousand

fitting & fasting. Material as per direction of the Engineer -in- Three Hundred Eighty Only

69 Providing and fixing in position ISI marked Rotational 1000.00 Litre 3.91 Rupees Three And Paise

moulded Polyethylene double layer cylindrical vertical Ninety One Only

storage Tank (IS : 1270) water Tank Size including marking

inlet and outlet. Over flow and washout arrangement with

G.I. connection including using necessary M.H. for

connection etc. complete with closed cover including

applying two coats of oil painting outside the Tank etc.

70 Providing and fixing ball cock of approved quality as 1.00 No 187.96 Rupees One Hundred

directed. (A) Copper Metal ISI Mark. (ii) 50 mm dia. Eighty Seven And Paise

Ninety Six Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

71 Providing & Fixing Wall Hung with PVC Flush Tank, Soft 9.00 No 5470.90 Rupees Five Thousand

Seat Cover & intergal "P" or "S" Trap including Jointing the Four Hundred Seventy And

Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S Paise Ninety Only

heavy duty rack bolt having 16mm dia, 165mm length using

Plastic sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc.

Complet as per Detailed Drawings, Specifications and as per

the Instruction of Engineer In charge.The Model & Make of

Wall Hung & Flush tank Shall be as per the Approved Make

List of G.S.P.H.C.L.

72 Providing and fixing water closet squatting pan (Orissa type 4.00 No 1338.77 Rupees One Thousand

W.C. pan) first quality with UPVC S trap of 100 mm Three Hundred Thirty Eight

including jointing the trap with UPVC Pipe (size 580mm X And Paise Seventy Seven

450 mm in vitreous china white colour).Rate also includes Only

making holes in RCC slab / Beam and fixing the trap in

hanging position by M.S. clamps of required size fitted in

73 Providing & Fixing Urinal Carto Model No. 60022 Make 17.00 No 2102.80 Rupees Two Thousand

Hindware Urinal Of Size 300mm x 330mm x 450mm etc. One Hundred Two And

Complete. Rate are inclusive of all matreials, Labour & Paise Eighty Only

Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Urinal Shall be as per the

Approved Make List of GSPHCL.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

74 Providing & Fixing Single Hole Wash Basin with C.I or M.S. 9.00 No 3935.33 Rupees Three Thousand

brackete & M. I . fisher union, P.V.C water pipe with Nine Hundred Thirty Five

Connection from Stop Cock to Pillar Tap, PVC Bottle Trap And Paise Thirty Three

with Connection 32mm dia. C.P. brassa waste coupling etc. Only

Complete. Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Wash Basin Shall be as per

the Approved Make List of GSPHCL.

75 Providing & Fixing Two way Bib Tap with Wall Flange. Rate 9.00 No 1309.39 Rupees One Thousand

are inclusive of all matreials, Labour & Necessary Fittings Three Hundred Nine And

etc. Complet as per Detailed Drawings, Specifications and Paise Thirty Nine Only

as per the Instruction of Engineer In charge. The Model &

Make of Two way Bib Tap Shall be as per the Approved

Make List of G.S.P.H.C.L.

76 Providing & Fixing Health Faucets (ABS Body). Rate are 9.00 No 565.51 Rupees Five Hundred Sixty

inclusive of all matreials, Labour & Necessary Fittings etc. Five And Paise Fifty One

Complet as per Detailed Drawings, Specifications and as per Only

the Instruction of Engineer In charge. The Model & Make of

Health Faucets Shall be as per the Approved Make List of

77 Providing & Fixing STOP/Angle COCK 15mm dia make 24.00 No 665.51 Rupees Six Hundred Sixty

& Model No As per Approved material list of G.S.P.H.C.Ltd Five And Paise Fifty One

Incl. with all neccery fitting etc. Complete. Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

78 Providing & Fixing 15mm One way Bib Tap with Wall 49.00 No 990.61 Rupees Nine Hundred

Flange. Rate are inclusive of all matreials, Labour & Ninety And Paise Sixty

Necessary Fittings etc. Complet as per Detailed Drawings, One Only

Specifications and as per the Instruction of Engineer In

charge. The Model & Make of 15mm One way Bib Tap Shall

be as per the Approved Make List of G.S.P.H.C.L.

79 Provinding and fixing UPVC SWR Nahni Trap of the 16.00 No 580.47 Rupees Five Hundred

following nominal dia. Self cleaning design with top jali and Eighty And Paise Forty

stainer including cost of cutting and making good the walls Seven Only

and floors 100mm inlet and 50mm outlet. Including 150mm x

150mm stainless steel jali.

80 Providing & Fixing PVC bottle trap model no ALD-701017 16.00 No 416.00 Rupees Four Hundred

POLYMER MAKE WATERTEC , with neccery COUPLINGS Sixteen Only

OF APPROVED QUALITY FOR WASH BASIN.

81 Providing and fixing concealed or open center point to wall 40.00 Rmt 654.04 Rupees Six Hundred Fifty

ceiling & floor CPVC (SDR 13.5) PIPE having National Four And Paise Four Only

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings with 6mm Dia U

Clamp with washer for Vertical water supply pipe. Pipe shall

be concealed or open as mention in tender description. Pipe

shall be as per approved make of GSPHCL make list [E]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

82 P & F to Wall Ceilling and Floor SWR Rain Water pipe as 191.00 Rmt 335.13 Rupees Three Hundred

Per IS-13592 of 90mm Dia Complete with Special flings, Thirty Five And Paise

Compressor type Fittings, Wall clips on wooden patty Thirteen Only

including making good the ceiling and floor on terrace rain

water pipe shall be 90 mm Dia. SWR horizontal pipe and

vertical pipe and 90mm bend at the end near by Ground

level rate are Inclusive of all Necessary Fittings required.

83 Providing and fixing to wall, ceiling and floor U.PVC SWR 226.50 Rmt 276.04 Rupees Two Hundred

Soil Waste Pipe with 'O' Ring 75 mm dia. of ISI 13592/92. Seventy Six And Paise

Rate inclusive of All fittings like single or double 'Y' with Four Only

door, reducer, coupler single 'T' with door bend, G.I. Slotted

Z patti of 16 Gauge (minimum1.60mm thick) and minimum

6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical

distance including All Labour Charges etc. complete and

making good the Wall, Ceiling and Floor.

84 Provinding and fixing in position PVC COWEL VENT to pipe 12.00 No 16.47 Rupees Sixteen And Paise

75 mm dia directed. Forty Seven Only

85 Providing & Fixing C.P. Brass Waste for Washbasin or sink 32.00 No 67.24 Rupees Sixty Seven And

(A) 32mm Paise Twenty Four Only

86 Providing and fixing to wall, ceiling and floor U.PVC SWR 189.00 Rmt 509.77 Rupees Five Hundred Nine

Soil Waste Pipe with 'O' Ring 110 mm dia. of ISI 13592/92. And Paise Seventy Seven

Rate inclusive of All fittings like single or double 'Y' with Only

door, reducer, coupler single 'T' with door bend, G.I. Slotted

Z patti of 16 Gauge (minimum1.60mm thick) and minimum

6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical

distance including All Labour Charges etc. complete and

making good the Wall, Ceiling and Floor.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

87 Provinding and fixing in position PVC COWEL VENT to pipe 16.00 No 28.16 Rupees Twenty Eight And

110 mm dia directed. Paise Sixteen Only

88 Providing & fixing Concealed Center Point to wall celing & 20.00 Rmt 206.73 Rupees Two Hundred Six

floor CPVC (SDR-13.5) PIPE having National Sanitation And Paise Seventy Three

Foundation (NSF) seal For Portable Water of 20 mm. dia. Only

nominal bor tube fitting and clamps including making good

the wall, ceiling and floor etc. Complete

89 Providing & fixing Concealed Center Point to wall celing & 22.00 Rmt 251.31 Rupees Two Hundred Fifty

floor CPVC (SDR-13.5) PIPE having National Sanitation One And Paise Thirty One

Foundation (NSF) seal For Portable Water of 25 mm. dia. Only

nominal bor tube fitting and clamps including making good

the wall, ceiling and floor etc. Complete

90 Providing and fixing concealed or open center point to wall 58.00 Rmt 334.89 Rupees Three Hundred

ceiling & floor CPVC (SDR 13.5) PIPE having National Thirty Four And Paise

Sanitation Foundation (NSF) seal for potable water of Eighty Nine Only

following dia. nominal bore tube fittings with necessary

fitting. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL

make list [D] 32mm Dia

91 Providing and fixing concealed or open center point to wall 91.00 Rmt 443.29 Rupees Four Hundred

ceiling & floor CPVC (SDR 13.5) PIPE having National Forty Three And Paise

Sanitation Foundation (NSF) seal for potable water of Twenty Nine Only

following dia. nominal bore tube fittings with 6mm Dia U

Clamp with washer for Vertical water supply pipe. Pipe shall

be concealed or open as mention in tender description. Pipe

shall be as per approved make of GSPHCL make list [E]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

92 Providing, supplying and fixing Corrugated DWC HDPE 27.00 Rmt 396.00 Rupees Three Hundred

Pipes of Class SN8 Structured Wall polyethelene Piping Ninety Six Only

systems (Pipe with online/offline coupler and elastomeric

sealing ring) with non-smooth External Annular Corrugated

and Smooth Internal Surfaces (Double Wall) for non-

pressure underground Sewerage & Drainage application as

per EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores

etc. complete. (150 mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping

and fittings with the help of coupler ( on line / off line )

attached with one end of pipes, sliding over the elastomeric

sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the

trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,

depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc.

complete as per drawing, specifications & detailed

engineering, including carriage of pipes & fittings from site

stacks to the place of laying etc. as per direction of Engineer-

93 Provinding and fixing gun metal check or non return full way 16.00 No 184.98 Rupees One Hundred

WHEEL / HANDLE VALVE 15 mm dia. Eighty Four And Paise

Ninety Eight Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

94 Provinding and fixing gun metal check or non return full way 12.00 No 416.47 Rupees Four Hundred

WHEEL / HANDLE VALVE 25 mm dia. Sixteen And Paise Forty

95 Provinding and fixing gun metal check or non return full way 8.00 No 656.86 Rupees Six Hundred Fifty

WHEEL / HANDLE VALVE 40 mm dia. Six And Paise Eighty Six

96 Providing and lowering laying and jointing in position C.I. 2.00 No 3055.00 Rupees Three Thousand

D/F. Sluice valves of following class and diameter incl. all Fifty Five Only

taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental stores stacking etc. complete (A1) PN-1 with

hand wheell /cap oparated (P.D. type short Body) [(A1) [2]

97 Finishing Ceiling / Slope Surfaces with Plastic Emulsion 758.00 Sqm 193.02 Rupees One Hundred

Paint on Ceiling / Slope Surfaces (Two Coats) to give an Ninety Three And Paise

Required shape and even shade after thoroughly brushing Two Only

the surface to remove all dirt, and remains of loose

powdered materials etc. complete. Rate are inclussive of

Applying Two Coats of Lappy (Putty) and One Coat of

Primer on New celing / slope Surfaces to give an even

shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

smooth. Fine Putty Primer and Plastic Emulsion Paint

Shall be used as per approved material list by GSPHC.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

98 Finishing wall with Plastic Emulsion Paint on wall 888.00 Sqm 179.92 Rupees One Hundred

Surfaces (Two Coats) to give an Required shape and even Seventy Nine And Paise

shade after thoroughly brushing the surface to remove all Ninety Two Only

dirt, and remains of loose powdered materials etc. complete.

Rate are inclussive of Applying Two Coats of Lappy (Putty)

and One Coat of Primer on New wall Surfaces to give an

even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand

papered smooth. Putty, Primer and Plastic Emulsion

Paint Shall be used as per approved material list by

99 Finishing walls with Weather Proof Exterior Emulsion 384.00 Sqm 153.35 Rupees One Hundred Fifty

Paint on Wall Surfaces (Two Coats) over and above Three And Paise Thirty

Applying one coat of Primer to give an Required shape and Five Only

even shade after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered materials etc.

complete. Primer and Exterior Emulsion Paint shall be

used as per approved material list of GSPHCL.

100 Cleaning the Sluge of Old Septic Tank 1.00 No 12000.00 Rupees Twelve Thousand

101 Cleaning the Sluge of Old Soak Well 1.00 No 15000.00 Rupees Fifteen Thousand

102 Providing and fixing S.W. gully trap with C.I. grating brick 8.00 No 1176.94 Rupees One Thousand

masonry chamber and watertight precast R.C.C. cover with One Hundred Seventy Six

frame of 300 mm. x 300 mm. size (Inside) with standard And Paise Ninety Four

weight: (A) square mouth trap 100 mm. x 100 mm. size P Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

103 Constructing Brick Masonary Chamber for underground C.I 13.00 No 5495.18 Rupees Five Thousand

inspection chamber and bends with brick having crushing Four Hundred Ninety Five

stenghth not less then 35 kg/ cm2 in C.M 1:5 R.C.C top slab And Paise Eighteen Only

1:2:4 mix (1 cement : 2 coarse sand :4 graded stone

aggregate 20mm nominal size ) with 8mm dia steel at

cm. C.C and foundation concrete 1:5:10 inside plaster

15mm thick with a flotting coat of neat cement walls and bed

concrete etc. complete. Rate are also inclusive of outside

plaster 15mm thick in C.M 1:3 from top of chamber and all

side upto 45cm deep for multi Or Single purpose pipe line.

(I) Inside Dimension For inspection Chamber 455mm x

610mm & 450mm deep etc. Complete. (Rate are inclussive

with Precast RCC cover with Frame MD20 Size

104 Extra over additional depth 0.1m part there of beyond 450 2.00 No 239.99 Rupees Two Hundred

mmdepth for brick masonry chamber for 455 mmx610 mm Thirty Nine And Paise

Ninety Nine Only

105 Pro and fixing 3mm thick acrylic sheet with Vinyl letter 1.00 Sqm 7193.89 Rupees Seven Thousand

colour-2073 Dark Grey for Back ground and colour-2199 One Hundred Ninety Three

white letter with rrequired screws etc. as per Required sizes And Paise Eighty Nine

complete etc. as per specification & Instruction of Engineer Only

106 Providing a I.S.I. mark 7 levers three key brass pad lock of 3.00 No 211.86 Rupees Two Hundred

NAVATAL (Godrej) make 65mm dia on completion of Eleven And Paise Eighty

project. Six Only

107 Providing & Fixing Cast Iron Steps of size 500mm x 150mm 16.00 No 150.00 Rupees One Hundred Fifty

x 22.5mm and painting with two coats of anti- corrosive Only

paintetc.complete

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

108 constructing brick masonry road gully chamber 500mm x 4.00 No 1997.22 Rupees One Thousand

450mm x 600mm including 500mm x 450mm C.I.horizontal Nine Hundred Ninety

grating with frame complete Seven And Paise Twenty

109 P&F Precast R.C.C.frame with cover MD 10 Ton (Rubber 9.00 No 1702.00 Rupees One Thousand

mould finish) inner size 600 x 450mm with all necessory Seven Hundred Two Only

110 Supplying, installation testing and commissioning of the 'C’ 107.00 Rmt 3133.81 Rupees Three Thousand

class MS Pipe as per IS1239 for undegound installation with One Hundred Thirty Three

welded connection with tapering connecting pieces, short or And Paise Eighty One Only

long bends, specials like sockets, union nuts, elbows, plugs,

tees etc. complete to make the system operative as required

by LFA, the pipes will have to be laid and fixed in trenches.

The scope shall also include excavation, backfilling of soil,

providing, warpping and coating of pypkote (corrosion

protection tape) with overlap of 15 to 20 mm) etc. complete.

The scope shall also include hydraulic testing at 1.5 times

working pressure before wrapping & coating. [A] 150 mm

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

111 Providing, laying, testing and commissioning of 'C' 185.00 Rmt 2240.48 Rupees Two Thousand

class heavy duty MS pipe confirming to IS 3589/IS 1239 Two Hundred Forty And

including welding, fittings like elbows, tees, flanges, tappers, Paise Forty Eight Only

nuts, bolts, gaskets etc and fixing the pipes on wall/ceiling

with suitable clamps/support frame and painting with 2 or

more coats of synthetic enamle paint of required shade

complete as required. The work includes makingholes in

brick or RCC walls, slabs/ roofs and making good the

damages by bringing to the original condition to the

satisfaction of the Engineer in charge, painting two coats of

approved shade(Post office red) of enamelpaint over a coat

of approved primer.[B] 100mm dia.

112 Providing, laying, testing and commissioning of 'C' 61.00 Rmt 1652.39 Rupees One Thousand Six

class heavy duty MS pipe confirming to IS 3589/IS 1239 Hundred Fifty Two And

including welding, fittings like elbows, tees, flanges, tappers, Paise Thirty Nine Only

nuts, bolts, gaskets etc and fixing the pipes on wall/ceiling

with suitable clamps/support frame and painting with 2 or

more coats of synthetic enamle paint of required shade

complete as required. The work includes makingholes in

brick or RCC walls, slabs/ roofs and making good the

damages by bringing to the original condition to the

satisfaction of the Engineer in charge, painting two coats of

approved shade(Post office red) of enamelpaint over a coat

of approved primer.[D] 80mm dia.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

113 Providing, laying, testing and commissioning of 'C' 41.00 Rmt 1281.00 Rupees One Thousand

class heavy duty MS pipe confirming to IS 3589/IS 1239 Two Hundred Eighty One

including welding, fittings like elbows, tees, flanges, tappers, Only

nuts, bolts, gaskets etc and fixing the pipes on wall/ceiling

with suitable clamps/support frame and painting with 2 or

more coats of synthetic enamle paint of required shade

complete as required. The work includes makingholes in

brick or RCC walls, slabs/ roofs and making good the

damages by bringing to the original condition to the

satisfaction of the Engineer in charge, painting two coats of

approved shade(Post office red) of enamelpaint over a coat

of approved primer.[E] 50mm dia.

114 Providing, laying, testing and commissioning of 'C' 30.00 Rmt 471.00 Rupees Four Hundred

class heavy duty MS pipe confirming to IS 3589/IS 1239 Seventy One Only

including welding, fittings like elbows, tees, flanges, tappers,

nuts, bolts, gaskets etc and fixing the pipes on wall/ceiling

with suitable clamps/support frame and painting with 2 or

more coats of synthetic enamle paint of required shade

complete as required. The work includes makingholes in

brick or RCC walls, slabs/ roofs and making good the

damages by bringing to the original condition to the

satisfaction of the Engineer in charge, painting two coats of

approved shade(Post office red) of enamelpaint over a coat

of approved primer.[F] 25mm dia.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

115 Supply and installation,testing and commisioning of 5.00 No 7856.34 Rupees Seven Thousand

Butterfly valves of PN 1.6 ratings with bronze/gunmetal Eight Hundred Fifty Six

seat duly ISI marked complete with nuts, bolts, washers, And Paise Thirty Four Only

gaskets confirming to IS 13095 of following sizes as

required:[A] 150mm dia.

116 Supply and installation,testing and commisioning of 4.00 No 5845.97 Rupees Five Thousand

Butterfly valves of PN 1.6 ratings with bronze/gunmetal Eight Hundred Forty Five

seat duly ISI marked complete with nuts, bolts, washers, And Paise Ninety Seven

gaskets confirming to IS 13095 of following sizes as Only

required:[B] 100mm dia.

117 Supply and installation,testing and commisioning of 3.00 No 4368.46 Rupees Four Thousand

Butterfly valves of PN 1.6 ratings with bronze/gunmetal Three Hundred Sixty Eight

seat duly ISI marked complete with nuts, bolts, washers, And Paise Forty Six Only

gaskets confirming to IS 13095 of following sizes as

required:[C] 80mm dia.

118 Providing, installing testing & commissioning of NRV of 5.00 No 15594.79 Rupees Fifteen Thousand

following sizes confirming to IS 5312 complete with rubber Five Hundred Ninety Four

gasket, GI bolts, nuts, washers etc. as required. [A] 150mm And Paise Seventy Nine

119 Providing, installing testing & commissioning of NRV of 10.00 No 9688.87 Rupees Nine Thousand

following sizes confirming to IS 5312 complete with rubber Six Hundred Eighty Eight

gasket, GI bolts, nuts, washers etc. as required. [B] 100mm And Paise Eighty Seven

120 Providing, installing testing & commissioning of NRV of 5.00 No 6743.74 Rupees Six Thousand

following sizes confirming to IS 5312 complete with rubber Seven Hundred Forty

gasket, GI bolts, nuts, washers etc. as required. [C] 80mm Three And Paise Seventy

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

121 Supplying and fixing of fire brigade connection of cast iron 1.00 No 13974.00 Rupees Thirteen Thousand

body with gun metal male instantaneous inlet couplings Nine Hundred Seventy

complete with cap and chain as reqd. for suitable dia MS Four Only

pipe connection conforming to IS 904 as required : (B) 4 way

- 150 mm dia M.S. Pipe

122 Providing, fixing, testing and commissioning of Gun metal 9.00 No 7646.00 Rupees Seven Thousand

/SS single headed ISI marked oblique pattern hydrant Six Hundred Forty Six Only

landing valves as per IS:5290 with 80mm dia flanged inlet

and 63mm dia female outlet complete with gun metal cap.

123 Providing and fixing of 63 mm SS branch pipe nozzle 5.00 No 1457.27 Rupees One Thousand

conforming to IS 903, suitable for instantaneous connections Four Hundred Fifty Seven

to hose coupling etc. as required 25 mm. And Paise Twenty Seven

124 Providing & fixing 63mm dia 15 m long RRL hose pipe 5.00 No 3899.90 Rupees Three Thousand

with 63mm dia male and femal couplings duly bound with GI Eight Hundred Ninety Nine

wires, revates etc. confirming to IS 636 (typa-A) as required And Paise Ninety Only

Stainless steel (grade 304)

125 Providing, fixing, testing and commissioning of Weather 5.00 No 3154.48 Rupees Three Thousand

proof standard fire hose cabinet having single opening with One Hundred Fifty Four

M.S. Fabricated Stand, necessary locking arrangement by And Paise Forty Eight Only

allan key suitable for housing 2 nos. hose pipe, 1no. Branch

pipe & nozzle spaner.

126 Providing & fixing orifice plate on fire hydrant valve including 5.00 No 1158.53 Rupees One Thousand

jointing materials having suitable base for reducing the One Hundred Fifty Eight

pressure hydrant outlet etc as directed. And Paise Fifty Three Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

127 Supplying and fixing First Aid hose reel with MS construction 5.00 No 7606.61 Rupees Seven Thousand

spray painted in post office red, conforming to IS 884 with Six Hundred Six And Paise

upto date amendments, complete with the following as Sixty One Only

required. 30m long 25mm (nominal internal) dia water hose

thermoplastic (textile rainforced) type-2 as per IS:

25mm (nominal internal) dia S.S.Shut up valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Connections from riser with stop valve (GM) & M.S. pipe.

128 Providing & eracting connection of siemens connection with 1.00 No 14150.00 Rupees Fourteen

necessary fitting at our required place of the fire hydrant Thousand One Hundred

system as directed. Gate connection Fifty Only

129 Supply, Installation, Testing & commissioning of 25 mm dia 9.00 Set 1097.50 Rupees One Thousand

gun metal ISI mark Gate Valve with 15 mm dia nipple as Ninety Seven And Paise

complete as directed. Fifty Only

130 Supply & Installation of Mainfold for fire hydrant distrubution 2.00 No 1550.00 Rupees One Thousand

200 mm dia system as directed. Five Hundred Fifty Only

131 providing & fixing emergency escape signes printed on rigid 2040.00 Sq.inch 9.39 Rupees Nine And Paise

PVC sheet / acrylic sheet 4 mm thick photoluminescent auto Thirty Nine Only

glow type of approved quality including fixing on door, wall,

celling complete with installation as directed. For Escape &

132 Making of Core in RCC work of size 200 mm etc. 11.00 Nos 1000.00 Rupees One Thousand

completeRCC Core Cutting Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

133 Getting provisional NOC and Final NOC and Renewal of 1.00 Job 16950.00 Rupees Sixteen Thousand

NOC (During Defect Liability Period) for Fire Nine Hundred Fifty Only

Hydrant,Sprinkler system, Fire Extinguisher, Fire alarm

system etc. from local fire authority or any other relevant

statutory authority at initial stage and required various other

stages of construction work, including preparation of

reports/drawings as per fire authority requirement. Rate also

includes renewal of Fire NOC during defect liability period as

per requirement. Main agency has to give demonstration of

all fire system to fire officer police / concern beneficiaries &

Agency has to submit FDR of approved bank as per clause

2.0, section 3, of Rs 20000.00 Or Quoted rate which ever is

higher to GSPHCL for minimum maturit period of Four years

in favour of GSPHC, which will be released after Successful

Submitting of All Fire NOC at the completion of defect

liability period. Renewal Fire N.O.C. shall be submitted final

S.D.proposal. Agency has to borne charges like preparing

and submission of all the documents, Photographs, CD/DVD

required togetthe N.O.C. from concern fire department and

also liaisoning work with concern departments. Main civil

agency has to get the pre-NOC from fire & emergency

department well before starting civil & the fire hydrant work

including sump & pumproom work. For that professional &

experience fire agency has to prepare drawing of fire

hydrant system, sprinkler system, firealarm system,

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

DGset etc. as per tender item and making floor layout of all

fire pump panel, cable earthing etc in pump room. If any

changes required in drawings of sump & pump room. Main

agency has to inform in written before excavation of pump &

sump room. Agency has to calculate the total head &

discharge required as per NBC / local fire office requirement

and as per site situation and submit fire pump OEM

specification curve foundation detail etc & get approval of

cable, panel drawings & specification.

After completion of firehydraunt related work as perpre-

NOC, tender specification & drawing approved by fire

department, agency has to do site visit with fire department

& give the testing & demonstration to fire officer & get the

final NOC before handingover of the building. Agency has to

give livetesting & demonstration of all system to GSPHCL &

police department jointly.For fire NOC fee separate item is

taken in tender. Agency has to quote the rate as per latest

Gazette in respective tender item.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

134 Supplying & Applying fire-retardant primer (base coat) and 70.00 Sqm 593.00 Rupees Five Hundred

fire-retardant paint (top coat) on existing steel and metal Ninety Three Only

surfaces/doors, ensuring fire resistance for up to 2 hours as

per NBC guidelines. The work includes thorough surface

preparation by cleaning, oiling, removing dirt, rust, and

foreign matter using brushes steel wool, scrapers and

sandpaper for enhanced adhesion, The primer provides,

corrosion resistence and a bonding layer, while the top coat

forms an intumescent barrier against fire and thermal

exposure. The application shall be carried out using a brush,

roller or spray in multiple coats to achieve the required dry

film thickness (DFT). The rate includes material, labour,

tools, equipment and all necessary safety recautions,

ensuring compliance with relevant fire safety standards and

in compliance with NBC 2016 code.

135 Providing and fixing fire-resistant barrier in duct openings at 17.00 Sqm 16625.00 Rupees Sixteen Thousand

slab level with fire stop sealant, having minimum 2-hour fire Six Hundred Twenty Five

rating, incompliance with NBC 2016 code. Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

ELECTRICAL WORK

136A Providing and erecting Point wiring with 1.1 KV grade ISI 10.00 Point 481.00 Rupees Four Hundred

marked 2 X 1.5 sq. mm copper PVC insulted FRLS wire Eighty One Only

with 1.5 sq. mm (green) copper PVC insulated FRLS wire for

earth continuity in FIA approved ISI mark medium class

white colour 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution erected on/in Brick

Wall / slab along with continuous G.I. fish wire to draw wires

and laid in approved manner zari for PVC pipe and

G.I.boxes shall be filled with cement mortar and finishing the

surface to match the wall / ceiling complete with approved

make 5/6 Amp. ISI make modular type switch and

accessories mounted in 20 G. G.I. company fabricated

metallic box covered with appropriate front plate modules

erected flushed with wall / ceiling with necessary modular

lamp holder / modular ceiling rose / HD Connector (make &

model approved by EIC and matching colur with switches

accessories) as directed for concealed wiring. Light point.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Necessary sheet / tape / polythene / sand must be erected

or filled in all box to prevent mortar going into the box.

Length of point wiring must not increase than 10 mtr. For

that necessary switch boards and their locations must be

finalised before execution by agency otherwise payment will

not be done for extra long point. (For future extention, if

required, agency has to erect one higher size metal box and

modular plate as per instruction of EIC. Cost of blank plate

shall be paid as per tender item) [Wire must be having box

packing] [This item include cleaning (inside/outside) of all

G.I. switch boards, electric point box, fan box, MCBDB & box

cutting plaster finishing for modular plate B14 without any

gap] [conductor resistance should be as per IS:8130/1984]

136B For Fan Point (with 6 A. Modular type switch and two 2.00 Point 668.00 Rupees Six Hundred Sixty

module hum free EME Five step type Electronic fan Eight Only

regulator both having ISI mark) Cat.-III

136C For separate Point (with 6 Amp. Switch & 5 pin socket both 2.00 Point 505.00 Rupees Five Hundred Five

are with ISI Mark) Cat.-III Only

136D For Looped on switch board (with 6 Amp. Switch & 5 pin 4.00 Point 255.00 Rupees Two Hundred Fifty

socket both are with ISI Mark) Cat.-III Five Only

137A Providing and erecting 1.5 mm thick FIA approved and ISI 100.00 Mtr. 24.00 Rupees Twenty Four Only

mark (embossed) RIGID white Colour PVC PIPES of

following size complete erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution concealed in

wall / slab along with contineous fish wire to draw mains, laid

in approved manner with plastering by cement mortar &

finishing the surface to match the wall / ceiling. 20 mm dia.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

137B 25 mm dia. 4550.00 Mtr. 33.00 Rupees Thirty Three Only

138A Providing and laying Mains with FRLS PVC Insulated wire 100.00 Mtr. 62.00 Rupees Sixty Two Only

ISI marked 1.1 KV grade with FIA approved ISI mark

medium class 20/25/32 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution to be erected

on/in brick wall / slab along with continuous G. I. fish wire to

draw mains laid in approved manner with plastering by

cement mortar & finishing the surface to match the wall /

ceiling complete with FRLS PVC insulated wire for earth

continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm.

FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor for earthing

as per standard colour code. [conductor resistance should

be as per IS:8130/1984]

138B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor 60.00 Mtr. 146.00 Rupees One Hundred

mains with 2.5 sq.mm. FRLS copper multi stranded Forty Six Only

conductor for earthing as per standard colour code. [Wire

must be having box packing]

139 Providing & fixing 20 mm. dia. PVC insulated G.I. 20.00 Mtr. 30.95 Rupees Thirty And Paise

Corrugated Flexible pipe with necessary socket, PVC Ninety Five Only

bushes, saddle, Check-nuts etc. complete of following sizes.

140 Providing & fixing 25 mm. dia. PVC insulated G.I. 20.00 Mtr. 37.14 Rupees Thirty Seven And

Corrugated Flexible pipe with necessary socket, PVC Paise Fourteen Only

bushes, saddle, Check-nuts etc. complete of following sizes.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

141 Providing and erecting following type of Modular Type 20.00 Each 25.00 Rupees Twenty Five Only

Accessories mounted with 20 G G. I. company fabricated

metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with

necessary connection. As desired by Engineer in charge.

Blank plate single Cat.-III.

142 Providing and fixing Plug Point wiring with 1.1 KV grade ISI 2.00 Point 738.00 Rupees Seven Hundred

marked approved make 2 x 2.5 sq.mm copper PVC Thirty Eight Only

insulated FRLS wire with 1.5 sq.mm (green) copper PVC

insulated FRLS wire for earth continuity in FIA approved ISI

mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected in wall/slab along with continuous

G. I. fish wire to draw wires and laid in approved manner

zari for PVC pipe & boxes shall be filled with cement mortar

& finishing the surface to match the wall / ceiling complete

with 16 Amp Modular type indicator Swich and accessories

mounted in 20 G. GI company fabricated metallic module

box covered with appropriate front plate modules erected

flushed with wall. (a) 16 Amp. Indicator switch & 1 No.

6/16 A universal socket white colour suitable for 3 pin

top duly both having ISI mark. (Necessary sheet / tape /

polythene / sand must be erected or filled in all box To

Prevent Mortor Going In To The Box) Cat.-III.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

143 Providing & Erecting 2.0 mtr long Earthing system by 6.00 Each 7025.00 Rupees Seven Thousand

making minimum bore of 225 mm dia in soft soil. Suitable for Twenty Five Only

doing pipe-in-pipe technology earthing.Earthing electric rod

must be made from Corrosion free Hot dip galvanizing pipes

having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D.,

ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm

minimum O.D., Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be

made from inner pipe for that pipe must be pressed and

gave rectangular shape so its work as a terminal.The hot

deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron

any where. SS Nut bolt:- 2 no.with washer suitable for

14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive

material minimum should be 25 kg.

(B) Inner chemical (CCM Compound)- Resistivity:-

ohm/meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be

capable to retain moisture for long time Back Filling

Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size

of 400 mm X 400 mm X 400 mm depth and Cover should be

heavy duty cast iron with required size of 300 mm X 300 mm

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL

accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency

has to bring the earth resistance to at least 02 ohms &

voltage between neutral & Earthing upto 02 volt. Agency has

to maintain earthing & its value for one year. Earthing must

be done in the presence of A.E. (GSPHCL)]

144 For Above Earthing Additional charges for boring in hard 6.00 Each 276.00 Rupees Two Hundred

rock soil (By Breaker) & filling soft soil in earth pit. Seventy Six Only

(Certificate for soil have to given by DEE/AE along with

145 Supplying and erecting M.S./G.I. metal box having 16 100.00 Sq. Inch 5.94 Rupees Five And Paise

Gauge painted with red oxide be concealed in wall with Ninety Four Only

necessary plastering & finishing with 3 mm thick laminated

sheet with grooving as directed of following depth 3" depth.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

146 Supplying and Erecting LED indoor fitting of approximately 4.00 Each 370.00 Rupees Three Hundred

4feet long with LED of wattage 0.2W to 0.5W assemble on Seventy Only

single MCPCB with housing use as a heat sink shall be

made from Aluminum extrusion having enough strength

(sample must be approved by EIC) with polycarbonate

diffuser with following specification: (A) Company

mark/name on the fitting.(B) Rated input voltage and

frequency: 220V to 240 VAC ; 50Hz. (C) Rated input

wattage: max. 24w (D) Rated input current : 0.2 Amp, (E)

Power Factor : Min. 0.90, (F) ATHD : Max. 15% , (G) Rated

Luminous flux: Min. 2420 lm, (H) CCT: 6500K, (I) CRI: Min.

80Ra, (J) Driver Ef iciency: Min. 80%, (K) LED life span: Min.

50000 Hrs @ L70, (L) Over Voltage protection: Withstand up

to 440V/AC for 4 Hrs., (M) Surge protection : Min. 2KV, (N)

IP rating: IP 20, (O) IK rating : IK 02, (P) Short circuit , Open

circuit & Reverse Polarity Protection must be provided (Q)

Fixing clamp design & strength should be suf icient to hold

the fitting erected on wall or ceiling., (R) 3 core copper wire

of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture) [Approval will be given

strictly subject to item specification]

147 Supplying and erecting 8 W LED lamps with following 4.00 Each 111.00 Rupees One Hundred

wattage capacity of 220 to 240 voltage, minimum 15000 Eleven Only

burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14

/ E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral

type, with PC diffuser suitable LAMP holder

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

148 Providing and erecting Polycarbonet body surface 1.00 Each 780.00 Rupees Seven Hundred

mounting LED Bulk head type 9 watt Lighting Fitting with Eighty Only

electronic driver having THD < 15%, CRI>80, P.F.0.95 And

lumen output from luminaire 720 lm, input voltage range 90-

300 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver

having efficiency >=80lm/w, -20 deg C to + 60 deg C

working temperature, AL frame with Beam Angle 120 deg.

149 Supply, Installation, Testing and Commissioning of suitable 2.00 Each 2603.00 Rupees Two Thousand Six

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Hundred Three Only

Direct Current (BLDC) permanent ferrite magnet Motor,

class of insulation: B, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed Control

and all remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.), suitable

for 140 to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required and 3 core

0.50 sq.mm ISI wire as per site requirment.(Agency has to

erect safey wire with ceiling fan and checked with EIC)

(Necessary test reports should be submitted strictly at the

time of approval. Sample approved by EIC subject to above

specification only) (A) 1200 mm Sweep (48")

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

150 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar 2.00 Each 125.00 Rupees One Hundred

bounded to the RCC bars up to 50 mm Length each side & Twenty Five Only

piereced through 18 Gauge G.I Box having 125 mm dia

depth of 75 mm complete erected concealed in ceiling with

necessary round modular plate

151 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. 5.00 Rn. Mtr. 107.00 Rupees One Hundred

pipe / M.S. pipe down rod erected duly painted for fan Seven Only

complete with necessary 24/0.2 flat 3 core flexible Core with

earthing. [The down rod thikness, hole, locking arrangement,

construction, poweder coating, colour shed should be same

as original down rod brought with ceiling fan. For that

agency has to give original down rod sample to fabricator

and one sample down rod should be approved with EIC.

After approval given by EIC, agency can use the down rod

as per approved sample. If without approval down rod will be

erected on site, agency has to replace them with own cost.]

152 Supplying & erecting single phase approved make 1.00 Each 2713.00 Rupees Two Thousand

industrial exhaust fan suitable for medium duty ring Seven Hundred Thirteen

mounted low noise operation suitable for medium duty Only

having following dia size and maximum speed in RPM. [B]

380 mm dia 900 RPM. Cat-II.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

153 Providing & erecting weather proof, dust & vermin proof, 1.00 Sq. Mtr. 16230.00 Rupees Sixteen Thousand

floor mounted front operated indoor type cubical panel board Two Hundred Thirty Only

having IP-42 & above protection as per approval from

engineer incharge and made from 2 mm. thick CRC M.S.

sheet for outer body & doors, 1.6 mm. thick CRC M.S. sheet

for internal partitions with necessary supporting angles, flats

including skirting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-In-Charge with erection of supplied

switchgears, busbars with suitable size of interconnecting

PVC copper wire / Copper-Aluminium strips, rubber gromets,

rib, control wires, backelite control fuses, measuring

instruments, earth bus & earth bolts, foundation flange-bolts-

base plates, sufficient nos. of hinged doors, handle with

locking arrangement, rubber gasket complete with Required

Nos. heavy Duty Connector with Cadmium plated nut and

bolt for Anti rusting

The panel shall be supplied with Seven Tank chemical

process which shall be carried out before applying painting,

painted with powder coating. (The rates excludes the cost of

switchgears, busbars, interconnecting mains & Copper /

Aluminium strip, fuse, meters etc. The dimension shall be

measured excluding base beams) The standard companies

switch gear shall be used and only manufacturers at CPRI

approved factory as per IEC 61439 and shall be certified by

that company whose switch gears are used after fabrication

for beneficial use. With 350 mm depth

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Panel manufacturer have to give 5 years maintenance and

service support if in case of breakdown or fault. Panel

manufacturer have to submit electrical meter calibration

report. Agency should design the panel in such a way that

there should not be any excess in panel area (sq.mtr) &

length of bus-bar (mtr), if any excess occurs draw attention

to GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra

and skill work force under supervision of electrical engineer

and guidelines given by manufacturer to avoid damage to

the item. Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked

by agency's engineer before giving order. If found any

problem in size discuss with GSPHCL engineer for

rectification before giving order. [Including Necessary

numbering / marking on PANEL done with red colour radium

sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per

requirement] (All Panel as per IEC 61439 as per NBC

Guideline) [Manufacturer must be of Gujarat state so

three stage inspection can be done]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

154 Providing & erecting Approved make Three pole moulded 1.00 Each 22065.00 Rupees Twenty Two

case circuit breaker having breaking capacity ICU of 35 Thousand Sixty Five Only

KA. at 415 V. having Normal current rating 250 A. with

variable Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S.housing. ICS=100% ICU Only.Cat-III.

155 Supplying & Erecting Approved Make Extended operating 1.00 Each 865.00 Rupees Eight Hundred

rotary handle with pad lock with three position Trip, Off, On Sixty Five Only

suitable for 25 Amp. to 250 Amp. panel

mounting.(Company Must be same company of

156 Supplying and erecting tripple pole & neutral 440V / 500 V 1.00 Rn. mtr. 4861.00 Rupees Four Thousand

Panel mounting Copper Busbars with four equal Nos. of Eight Hundred Sixty One

electrolyte bus having current density not more than 1.6 Only

Amp. / sq.mm (Rated current / cross section area) duly

wraped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports / insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.For electrolyte copper busbars Suitable for

157 Supplying and Erecting KITKAT pattern porcelain cutout 3.00 Each 416.00 Rupees Four Hundred

with base of following current capacity erected on existing Sixteen Only

block board. (vi) 200A. 500 V.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

158 Approved make Earth fault Relay suitable to mount with 1.00 Each 5362.00 Rupees Five Thousand

inter connection to moulded case circuit breaker having CT Three Hundred Sixty Two

ratio & MCCB rating as following along with shunt trip 220 V Only

AC with all internal connections & complete erected in

existing M.S.housing. (3) 250 A -400 A , CT Ratio 1/400

[make and model approved by EIC strictly as per tender

159 Supplying and erecting approved make panel mounting type 1.00 Each 1263.00 Rupees One Thousand

Digital Voltmeter having 3 x 1/2 digits LED display, 0 to Two Hundred Sixty Three

750 AC Volts range having 0.5 class accuracy, erected on Only

existing panel board with all connection, wiring etc. with

manufacturers calibration certificate. [Make and model

approved by EIC as per specification]

160 Supplying and erecting approved make panel mounting type 1.00 Each 1543.00 Rupees One Thousand

Digital Ammeter having 3 digits LED display, external CT Five Hundred Forty Three

operated, calibrated for 0 to 1000 Amps. suitable to operate Only

on 500 Volt AC, 0.5 class accuracy,erected on existing

panel board with all connection, wiring etc. with

manufacturers calibration certificate. [Make and model

approved by EIC as per specification]

161 Supplying and erecting Ammeter / Voltmeter selector 2.00 Each 314.00 Rupees Three Hundred

switch for 3 phase AC Supply 500 V on existing panel Fourteen Only

board with necessary connections. [Make and model

approved by EIC as per specification]

162 Supplying and erecting approved make set of indicator 3.00 Each 43.00 Rupees Forty Three Only

lamps of LED type lamp, lense cover, Bakelite holder

complete erected with necessary connections. [Make and

model approved by EIC as per specification]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

163 Providing and Erecting of Miniature circuit breaker single 4.00 Each 111.00 Rupees One Hundred

pole 6 Amp. to 25 Amp. suitable to operate on 240 V A.C. Eleven Only

system and having breaking capacity 10 KA to be erected in

existing MS box confirming to IS 8828/1996 with ISI Mark.

164 Providing & erecting L.T. Current Transformer with bar 3.00 Each 272.00 Rupees Two Hundred

primary 50/5 to 1000/5 ratio 15 VA burden having 0.5 class Seventy Two Only

accuracy erected in Class existing CRCA box duly secured

with insulating materials connected to the meter [Make and

model approved by EIC as per specification]

165 Providing & erecting Neutral Link for (ii) 200 / 250 / 320 / 1.00 Each 272.00 Rupees Two Hundred

400 / 630 / 800 Amps Seventy Two Only

166 Providing & erecting 240 V MCB Double pole switch for 7.00 Each 327.00 Rupees Three Hundred

Motor and inductive load (C curve) having 10 KA breaking Twenty Seven Only

capacity & confirms to IS:8828 in Existing M.S. box having

following capacity. For 40 Amp.

167 Providing & erecting 415 V MCB Four Pole for Motor & 2.00 Each 730.00 Rupees Seven Hundred

Inductive Load (C Curve) having 10KA breaking capacity & Thirty Only

confirms to IS:8828 in existing MS box having following

capacity. For 63 Amp.

168 Supplying & fixing box for housing RCCB + MCB 2.00 Each 272.00 Rupees Two Hundred

combination made of 18 SWG sheet steel duly powder Seventy Two Only

coated with gasket, dust & vermin proof bakelite shield two

earthing terminals for following type of RCCB, RCCB + MCB

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

169 Supply, Installation, Testing & Commissioning of Three 1.00 Each 7456.00 Rupees Seven Thousand

Phase, 440 V Surge Suppressor protection Device (SPD) Four Hundred Fifty Six

& 40 Amp TPN MCB (or As per SPD OEM guide line for the Only

protection of SPD which is erected such a way that it can be

operated easily) SPD must be capable to protect all

electrical and electronics equipments if SPD blast or fuse

then the panel builder must have replace it soon during

defect liability period.The Detail Specification of SPD are As

per Attached sheet with Annexture -A(E). (With Five year

Gaurantee / warranty)

170A Supplying and laying UPVC cable trunking system 30.00 Mtr. 275.00 Rupees Two Hundred

comprising unplasticised polyvinyl, chloride rigid material Seventy Five Only

with ignition free & flame proof confirming BS .All necessary

accessories and measuring of following sizes. [1] 75 mm x

50 mm trunking.[MK, LEGRAND, OBO make Only]

170B 100 mm x 50 mm trunking .[MK, LEGRAND, OBO make 20.00 Mtr. 424.00 Rupees Four Hundred

Only] Twenty Four Only

171 Providing and erecting metalic danger notice board for 1.00 Each 69.00 Rupees Sixty Nine Only

MEDIUM VOLTAGE installation to be erected as per I.S.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

172 Providing, erecting, fabricating the M.S. structure as per 60.00 Kg. 75.00 Rupees Seventy Five Only

requirement of site as per structure design Including proper

size approved by EIC of M.S. angles, flats, bars, square

pipe, channels, sections (Tata, Jindal, Asian, JSI Make)

complete with cutting, welding, grinding and finishing duly

painted with Asian/Nerolac make premium quality oil paint

and true care red oxide metal primer,asian paint make with

erection on site as per direction of engineer in charge with

necessary grouting cementing, plastering and finishing

complete. All hole opening of square pipe end must be

closed with M.S plate welding. Payment will be done on KG

as per Actual weight.

173 Providing & laying HDPE Double walled corrugated pipes 200.00 Mtr 117.00 Rupees One Hundred

(DWC) (conforming to IS: 16205 (part 24) 2018)) with Seventeen Only

minimum load required of 450N capacity with anti rodent

and ultra violet material properties with necessary

connecting accessories of same material at required depth

to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the

same to make ground as per original. (A) For Outer dia.

mm and Inner dia. 38 mm. (Test Certificate to be

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

174 Providing & laying HDPE Double walled corrugated pipes 50.00 Mtr 150.00 Rupees One Hundred Fifty

(DWC) of polyethylene (conforming to IS: 16205 (part 24) Only

2018) with minimum load required of 450N capacity with anti

rodent and ultra violet material properties with necessary

connecting accessories of same material at required depth

to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the

same to make ground as per original.For Outer dia. 90 mm

and Inner dia. 75 mm. (Test Certificate to be Submitted)

175 Providing and laying Mains with ISI marked, 1.1 KV grade 300.00 Mtr. 17.00 Rupees Seventeen Only

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS:694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. For One wire 1.50 sq. mm

176 Providing and Laying of Mains with ISI marked, 1.1 KV 30.00 Mtr. 56.00 Rupees Fifty Six Only

grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 6.00 sq. mm

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

177 Providing and Laying of Mains with ISI marked, 1.1 KV 30.00 Mtr. 91.00 Rupees Ninety One Only

grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 10.00 sq. mm

178 Providing and Laying of Mains with ISI marked, 1.1 KV 50.00 Mtr. 141.00 Rupees One Hundred

grade electrolyte multi stranded, annealed copper conductor Forty One Only

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. [g] One wire 16.00 sq. mm

179 Providing and Laying of Mains with ISI marked, 1.1 KV 20.00 Mtr. 234.00 Rupees Two Hundred

grade electrolyte multi stranded, annealed copper conductor Thirty Four Only

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. For 25 sq.mm wire

180 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 150.00 Mtr. 361.00 Rupees Three Hundred

armoured Copper cable for 1100 volt to be laid 90 cms. Sixty One Only

Under ground or to be laid on wall with suitable G.I. heavy

guage 1.0 mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor of following size of

cables. [a-1] For 4 core x 4 sq.mm.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

181 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured 50.00 Mtr. 152.00 Rupees One Hundred Fifty

cable multistrand Aluminium conductor for 1.1 KV. to be Two Only

laid 90 cms.Under ground or to be laid on wall with suitable

G.I. heavy guage 1.0 mm thick cable clamp or in existing

DWC pipe underground or road crossing or floor of following

size of cables. [d] 4 core x 16 Sq. mm

182 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured 50.00 Mtr. 218.00 Rupees Two Hundred

cable multistrand Aluminium conductor for 1.1 KV. Eighteen Only

Under ground or to be laid on wall with suitable G.I. heavy

guage 1.0 mm thick cable clamp or in existing trench / pipe

of following size of cables. [A-1] 3*1/2 core x 35 Sq. mm (16

Sq.mm*1/2 core)

183 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured 50.00 Mtr. 375.00 Rupees Three Hundred

cable multistrand Aluminium conductor for 1.1 KV. to be laid Seventy Five Only

90 cms. Under ground or to be laid on wall with suitable G.I.

heavy guage 1.0 mm thick cable clamp or in existing DWC

pipe underground or road crossing or floor of following size

of cables.. 3*1/2 core 70 Sq. mm (35 Sq. mm 1/2 core)

184 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured 50.00 Mtr. 486.00 Rupees Four Hundred

cable multistrand Aluminium conductor for 1.1 KV. to be laid Eighty Six Only

90 cms. Under ground or to be laid on wall with suitable G.I.

heavy guage 1.0 mm thick cable clamp or in existing DWC

pipe underground or road crossing or floor of following size

of cables.. (E) 3 1/2 core 95 Sq. mm (50 Sq. mm 1/2

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

185A Providing & fixing double compressed heavy duty flange 50.00 Each 43.00 Rupees Forty Three Only

type brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm.

(Sigma, MCI, Commet Make Only)

185B For 4 core*16 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 57.00 Rupees Fifty Seven Only

185C For 3*1/2 core*35/50 Sq. mm (Sigma, MCI, Commet Make 4.00 Each 75.00 Rupees Seventy Five Only

185D For 3*1/2core*70 Sq. mm. (Sigma, MCI, Comet Make Only) 4.00 Each 102.00 Rupees One Hundred Two

185E For 3 & 1/2 core 95 Sq. mm.(Sigma, MCI, Comet Make 4.00 Each 130.00 Rupees One Hundred

Only) Thirty Only

186 Solderless crimping type Copper lugs conforming to IS 100.00 Each 8.00 Rupees Eight Only

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

187A Solderiess crimping type Aluminium Lugs conforming to IS 10.00 Each 15.00 Rupees Fifteen Only

suitable for cable of following size evenly crimping with high

pressure tool & connected to switchgear terminals with

brass/ cadmium plate nut bolts in an approved manner. For

187B For 35/50 Sq.mm. 15.00 Each 20.00 Rupees Twenty Only

187C For 70 Sq.mm. 15.00 Each 25.00 Rupees Twenty Five Only

187D For 95 Sq.mm. 15.00 Each 40.00 Rupees Forty Only

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

188 Supplying, installation, testing and commissioning of Diesel 1.00 Each 518350.00 Rupees Five Lakh(s)

engine driven Main Fire Pump suitable for automatic Eighteen Thousand Three

operation and consisting of following, complete in all Hundred Fifty Only

respects, as required: [Diesel driven pump]

(a) Horizontal type, multistage, centrifugal, split casing pump

of cast iron body & bronze impeller with stainless steel shaft,

mechanical seal conforming to IS

(b) Suitable HP 1500 RPM water cooled with radiator diesel

conforming to relavant IS standard complete with auto

starting mechanism 12/24 Volts electric starting equipment,

diesel tank, exhaust pipe extended upto 10 M outside pump

house duly insulated with 50 mm thick glass wool with

mm thick aluminium sheet cladding, residential silencer,

instrument and protection as per standard specification, stop

solenoid for auto stop in the event of fault with auto

indications painted with post office red color etc. as required.

(c) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

(d) Suitable cement concrete foundation duly plastered with

anti vibration pads.

(e) Cost include providing, erecting req. size copper XLPE

Armound cable with GI cable tray, support etc. as per EIC

instruction (app. cable lenth 15 mtr.)

(f) Cable from pump to panel will be laid in cable tray or fixed

on G.I./M.S. strip / channel as per instructions given by EIC

as per site requirement.

Cost include foot valve of Suitable size CI body heavy duty

(SANT,Kirloskar, Kartar, Zoloto make)

[The all require Technical specification & Test certificate

shall be submitted to Local fire Authority for approval]

2280 LPM @ 56 mtr. head

(Factory inspection will have to carried out by agency with

G.S.P.H.C.L. engineer)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

189 Supplying, Installation, Testing & commissioning of Electric 1.00 Each 227123.00 Rupees Two Lakh(s)

driven Main Fire Pump suitable for automatic operation and Twenty Seven Thousand

consisting of following, complete in all respects, as required: One Hundred Twenty

(a) Horizontal type, Single stage, centrifugal, End Suction Three Only

Long Coupled Pump of cast iron body & bronze impeller

with stainless steel shaft, mechanical seal conforming to IS

1520. (b) Suitable HP Squirrel cage induction motor, TEFC,

synchronous speed 2900 RPM, suitable for operation on

415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for

enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required. (d) Suitable

Cement Concrete Foundation duly plastered with anti

vibration pads. (e) cost include foot valve of suitable size CI

body heavy duty. (f) Discharge :- minimum 2280 LPM @

Head:- minimum 56 Mtr. Note: The head of the pump shall

be selected in a manner so as to give a minimum

3.5kgf/cm2 pressure at the highest/farthest point. Agency

has to calculate the total head required for getting minimum

3.5kgf/cm2 pressure at the farthest & highest point of

building of wet riser fire system. For that agency has to

calculate total pump head by considering vertical head (

Total Building height+ Sump depth+3.5kgf/cm2 pressure &

Total equivalent vertical head due to frication losses of total

length of pipe + bend number, Elbow number, Tee,

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Valve etc.) Agency must have to select pump model having

required head & discharge (as per fire department rules) at

duty point. No Extra payment shall be done for head

variation due to site situation & fire rules. The panel shall be

design according to motor H.P.

190 Supplying, installation, testing and commissioning of electric 1.00 Set 69587.00 Rupees Sixty Nine

driven pressurisation pump suitable for automatic operation Thousand Five Hundred

and consisting of following, complete in all respects, as Eighty Seven Only

required: (Jockey Pump).

(a) Horizontal type, multistage, centrifugal pump of cast

iron body and bronze impeller with stainless steel shaft,

mechanical seal conforming to IS:

(b) Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase, 50 Hz AC

supply with IP 55 class of protection for enclosure, horizontal

foot mounted type with Class-'F' insulation,

conforming to IS :

(c) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required.

(d) Suitable cement concrete foundation duly plastered

and with anti vibration pads.

(e) Required size 3 core flat cable from pump to panel for

connection should be provided with pump.

(f) Cable from pump to panel will be laid in cable tray or fixed

on G.I./M.S. strip / channel as per instructions given by EIC

as per site requirement.

180 lpm at 56 m Head.

(Factory inspection will have to carried out by agency with

G.S.P.H.C.L. engineer)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

191 Fabrication, SITC of Electrical control panel of cubical 1.00 Each 208256.00 Rupees Two Lakh(s) Eight

construction, floor, mounted type, fabricated out of 2 mm Thousand Two Hundred

thick CRCA sheet, compartmentalised with hinged lockable Fifty Six Only

doors, dust and vermin proof, powder coated of approved

shade after 7 tank treatment process,cable alley, inter -

connection with suitable size copper conductor cable/solid

copper strip, having switchgears and accessories,mountings

and internal wiring,earth terminals, numbering etc. complete

in all respect, suitable for main fire pump, pressurisation

pump & diesel pump set complete as per CPWD

specification with following in coming and out goings,

suitable for operation on 415 V, 3 phase, 50 Hz AC supply

with enclosure protection class IP 42 as required:

Up to 250 A as per pump full load current and starting

current & approved by E.I.C, 50 KA, 4 pole MCCB,

Ics=100% Icu rating, digital voltmeter 0-500 V with selector

switch and Ammeter 0-250 A with selector switch & CTs

etc. LED type RYB phase indicating lamps, ON, OFF, trip

indicating lamps, Set of copper bus bar 300 A

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

(Note : All outgoing feeders for pumps should have digital

ammeter with selector switchs, and LED type ON, OFF, trip

indicating lamps)

Main Fire Pump:

Up to 160 A as per pump full load current and starting

current & approved by E.I.C., 50 KA, TPN MCCB, Ics=100%

lcu with fully automatic star/delta starter suitable for 60 HP

pump with overload protection, Current sensing type single

phase preventor complete with all accessories and internal

wiring required for automatic operation, Selector switch for

local/remote, auto/manual/off operation

63 A, 50 KA, TPN MCCB, lcs=100% lcu with suitable HP

fully automatic star/delta starter with over load pritection,

Current sensing type single phase preventor complete with

all accessories and internal wiring required for automatic

operation, Selector switch for local/remote, auto/manual/off

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Diesel engine control:

Control for diesel engine comprising - automatic/manual

selector switch & 3 attempts starting device, Timers and

relays as required, Push buttons, Start/stop in manual mode

indicating lamp for high/low lube & Oil pressure, High water

temperature and engine on indication, Battery charger

suitable for 12/24 V DC with boost and trickle selector

switch, 0-30 V DC voltmeter & 0-20 A ammeter all standard

relays and accessories for automatic operation of diesel

System Controller:

Design, SITC of system controller to control operation of

main electric fire pump, diesel pump, pressurization pump,

terrace pump on sequence as per specification consisting of

relays, timers. Sensors, annunciation window for fault

indication, complete as per specification.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

192 Supplying, installation, testing and commissioning of electric 1.00 Each 73057.00 Rupees Seventy Three

driven terrace pump suitable for automatic operation and Thousand Fifty Seven Only

consisting of following, complete in all respects, as required:

(a) Horizontal type, multistage, centrifugal, split casing pump

of cast iron body & bronze impeller with stainless steel shaft,

mechanical confirming to IS :

(b) Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase, 50 Hz, AC

supply with IP55 class of protection for enclosure, horiziontal

foot mounted type with Class-'F' insulation, conforming to IS-

(c) M.S.fabricated common base plate, coupling, coupling

guard, foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered and

with anti vibration pads.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

(e) Cost include providing, erecting req. size copper XLPE

Armound cable with GI cable tray, support etc. as per EIC

instruction (app. cable lenth 15 mtr.)

(f) Cable from pump to panel will be laid in cable tray or fixed

on G.I./M.S. strip / channel as per instructions given by EIC

as per site requirement.

(g) Cost include foot valve of Suitable size CI body heavy

duty (SANT,Kirloskar, Kartar, Zoloto make)

450 lpm at 35 m Head

Note: The head of the pump is selected in a manner so as to

give a minimum 3.5kgf/cm2 pressure at the highest/farthest

[The all require Technical specification & Test certificate

shall be submitted to Local fire Authority for approval]

(Factory inspection will have to carried out by agency with

G.S.P.H.C.L. engineer)

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

193 Supplying & erecting approved make motor control 1.00 Each 8624.00 Rupees Eight Thousand

cubical panel (Direct-on- line) made from 16 G. CRCA Six Hundred Twenty Four

sheet duly epoxy powder painted inside and outside with Only

hinged doors and locking, arrangement consisting of suitable

size of ON-OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R-Y-B phases,

overload relay, Automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming, wires

duly socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L&T, Siemens or BCH make only. (a)

As per suitable size as per terrace pump KW / HP rating

and relay and contactor rating as per full load current

rating of Terrace pump [The panel must be suitable for

ON-OFF switch contacts with suitable capacity

contactors and required accessories in panel]

194 Providing & fixing of pressure switch in M.S. pipe line 4.00 Each 1310.00 Rupees One Thousand

including connection etc. as required. (Indfos, Danfoss or Three Hundred Ten Only

equivalent Approved ISI make & model approved by EIC)

195 Providing and fixing of Dial type Pressure Gauge having 4.00 Each 1513.00 Rupees One Thousand

100 mm dial & range of 0-14 Kg/cm2 with isolation ball Five Hundred Thirteen

valve. (Make:- Hguru, Fiebig) (Test certificate must be Only

196 Supplying, installation, testing and commissioning of On/Off 6.00 Each 890.00 Rupees Eight Hundred

switch with all require. [ASES or equivalent make and Ninety Only

model approved by EIC as per specification) [Test certificate

must be submitted]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

197 Providing and fixing of Air Release Valve including Ball 2.00 Each 1602.00 Rupees One Thousand Six

Valve 25 mm dia. (Approved ISI make & model approved by Hundred Two Only

EIC strictly as per specification)

198 SITC of Microprocessor based Net-workable Analogue 1.00 Nos 126006.00 Rupees One Lakh(s)

Addressable Fire Alarm Control Panel. The Panel shall be Twenty Six Thousand Six

compliant with EN54-2, EN54-4 and approved by LPCB. The Only

Fire Alarm Control Panel shall have inbuilt one loop and

expandable capacity upto 2 loops. The Panel must have

large graphic display. The Panel must also have the

capability to take Addressable Intelligent Wired and Wireless

Devices on same loop. Each loop shall have a capacity of

127 analogue Addressable devices and 127 Base

sounders/Base Sounder Beacons. The Panel shall have

V AC power supply along with automatic Battery Charger.

(Approved by LPCB & (NOTIFIER / EDWARD / HOCHIKI /

BOSCH / Honeywell make and model approved by EIC

as per specification) [Test certificate must be submitted]

199 Supply,Instllation,Testing and Commissioning of 125.00 Nos 2843.00 Rupees Two Thousand

Addressable Smoke detector with base with Binary coded Eight Hundred Forty Three

address setting. Dual LED’s for 360° visibility. Sleek low- Only

profile housing design. Regular 100mm base. IP Rating : IP -

42. Approval: UL Listed/LPCB (Including Five year free

maintenance with guarantee) (NOTIFIER / EDWARD /

HOCHIKI / BOSCH / Honeywell make and model

approved by EIC as per specification)

[Test certificate must be submitted]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

200 Supply,Instllation,Testing and Commissioning of 2.00 Nos 2913.00 Rupees Two Thousand

Addressable Heat detector with base with Binary coded Nine Hundred Thirteen

address setting. Dual LED’s for 360° visibility. Sleek low- Only

profile housing design. Regular 100mm base. IP Rating : IP -

42. UL Listed/LPCB (Including Five year free maintenance

with guarantee) (NOTIFIER / EDWARD / HOCHIKI / BOSCH

/ Honeywell make and model approved by EIC as per

specification) [Test certificate must be submitted]

201 Supply,Instllation,Testing and Commissioning of 20.00 Nos 3030.00 Rupees Three Thousand

Addressable Manual Call Point - Resettable type - with Thirty Only

back box with Binary coded address setting with Status LED

for 360° visibility - IP:50 Rating (Including Five year free

maintenance with guarantee) (NOTIFIER / EDWARD /

HOCHIKI / BOSCH / Honeywell make and model

approved by EIC as per specification) [Test certificate

must be submitted]

202 SITC of Analogue addressable loop powered Base 20.00 Nos 4800.00 Rupees Four Thousand

Sounder, variable sound output 50 ~ 98 dB(A) (±2 dB(A)) Eight Hundred Only

output at 1 metre, 51 user-selectable tones (all tones EN54-

3 compatible), Auto shutdown feature prevents noise-

pollution, Approved by LPCB & VdS (Including Five year

free maintenance with guarantee) (NOTIFIER / EDWARD /

HOCHIKI / BOSCH / Honeywell make and model

approved by EIC as per specification) [Test certificate

must be submitted]

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

203 SITC of Response Indicator - Dual LED (Metal square plate 15.00 Each 150.00 Rupees One Hundred Fifty

type) (Including Five year free maintenance with guarantee) Only

(NOTIFIER / EDWARD / HOCHIKI / BOSCH / Honeywell

make and model approved by EIC as per specification)

[Test certificate must be submitted]

204 Supplying and erecting Flexible PVC insulated multistrand 5000.00 Mtr. 46.00 Rupees Forty Six Only

multicore 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. For 1.50 Sq.mm 3 core

round PVC sheathed. having insulation colour RED or

BLACK for Fire Alarm System. [make and model approved

by EIC strictly as per tender specification)

205 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked 300.00 Mtr. 152.00 Rupees One Hundred Fifty

armoured Copper cable for 1100 volt to be laid 90 cms. Two Only

Under ground or to be laid on wall with suitable G.I. heavy

guage cable 1.0 mm thick clamp or in existing DWC pipe

underground or road crossing or floor. For 4 core x

sq.mm Copper Armourd cable with all require

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

206 Executing comprehensive (All-in-All) service & 1.00 Job 67490.00 Rupees Sixty Seven

maintenance with spare parts as per terms & condition Thousand Four Hundred

of tender for Fire hydrant Sprinkler system, Fire Ninety Only

Extinguisher with fire hydrant agency for defect liability

period and copy of this contract will be submitted before final

bill. Agency has to quote rate accordingly. Agency has to

also provide the fitness certificate from system agency and

submit to G.S.P.H.C.L. Agency has to complusary submit

FDR of approved bank as per clause 2.0, section-3, of

Rs. 67490.00+GST or quoted rate (with tender premium)

whichever is higher to G.S.P.H.C.L. for minimum

maturity period of Five years in favour of G.S.P.H.C.L.,

Which will be released after successful completion of A.M.C.

& at the completion of defect liability period. Fire System

agency has to maintain written record of service &

maintenance during defect liability daily period duly sign by

police dept. and submitted regularly to G.S.P.H.C.L. Agency

has to give minimum three services and demonstration per

year and testing and training of entire fire hydrant, sprinkler,

fire alarm, Fire Extinguisher etc. during defect liability period

and obtain necessary certificate from police department and

submitted to G.S.P.H.C.L.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

Agency has to do maintenance as per terms & condition

alternative in tender. Re-filling Hydraulically pressure for

CO2 and ABC type fire extinguisher if required to get the

N.O.C. from fire department. (Note:- This FDR is exicute

only if fire hydrand system with Main fire pump,Jockey

Pump,Diesel Pump work done on site & applicable for Main

fire Pump,Jockey pump,Diesel pump(whole fire Hydrant with

Fire extinguisher maintenance only)

207 Providing and fixing of Automatic type 5 kg Fire 2.00 Each 5240.00 Rupees Five Thousand

Extinguishers Mono Ammonium Phosphate powder 50% Two Hundred Forty Only

Confirms to IS 4308, Applicable fire classes A,B & C, UGTS

Pressure Gauge, Can Height 370mm, Diameter 230 ±

10mm, Made up from 2 mm thick sheet, Body

Construction Deep Drawn with MIG Welding technology,

Brass forged sprinkler valves with Nozzle is specially

designed to give more than 99% discharge. Together with

orifice characteristic to cover adequately fire risks with

scattering cone of 40 to 45° Angle. External Pure polyester

(UV resistant) and Internal Epoxy polyester powder coated,

Heat Sensitive Glass bulb of 68 °C. Area covered will be 2-

2.5 m2 and volume of coverage is 7 m3. Referance Weight:-

Empty Weight 2.64 kg, Full weight 7.64 kg, 1. Necessary

certificate & and guarantee must be attached, 2. OEM has

to provide heavy duty wall/ Ceiling mounting Bracket/

clamp, screw, hardware for installation. 3.Following printed

marking Manufacturing Date and Expiry Date must be

mention on Extinguisher.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

4. Refilling period must be of 3 Years. Following Printed

marking on equipment must be required:- Model No,

Capacity, Gross Weight, Content, Fire Rating, Batch No,

Serial no, Mfg Month, Refilling Due. [with necessary

numbering / marking with oil paint by painter as instructions

given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,

208 Providing and fixing of ABC Type Store Pressure Fire 25.00 Nos. 1991.00 Rupees One Thousand

Extinguisher Having capacity 6 kg Filled with Mono Nine Hundred Ninety One

Ammonium Phosphate Powder 50% confirms to IS 4308, Only

Stored Pressure Type, UGTS Pressure Gauge, Can Height

530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec,

Controllable discharge mechanism, Jet Range 5 Meters,

Average Discharge is 92%, applicable on Class A,B & C and

electrically started Fire, Fire Rating 4A:144B, Can

Construction : Deep drawn & CO2 Mig welded,

EPDM(Ethylene Propylene Diene Monomer) Rubber

Hose with both end Aluminum clamped, Internal Coating -

Epoxy Powder coating, External Coating - Pure

Polyester Powder coating (UV Resistant),Brass forged

CE Marked valves with NRV & Auto Safety Release with

safety Pin is of SS material, Made up from 1.6mm thick

sheet, Extinguishers confirmed to IS 15683:2018 and ISI

marked. Referance Weight:-Gross Weight 8.9 Kg, Empty

Weight 2.9 Kg, 1. Necessary certificate & and guarantee

must be attached, 2. OEM has to provide wall mounting

heavy duty bracket/clamp, screw, hardware for installation.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

3.Following printed marking Manufacturing Date and Expiry

Date must be mention on Extinguisher 4. Refilling period

must be of 3 Years. Following Printed marking on equipment

must be required:- Model No, Capacity, Gross Weight,

Content, Fire Rating, Batch No, Serial no, Mfg Month,

Refilling Due. [with necessary numbering / marking with oil

paint by painter as instructions given by G.S.P.H.C.L

engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

209 Providing and fixing of CO2 type High Pressure Portable 25.00 Nos. 6526.00 Rupees Six Thousand Five

4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS Hundred Twenty Six Only

15222, Control discharge mechanism fitted with 1 Meter

Wire Braided Hose & Electrical non-conductor

Polyethylene Flat Horn with Diffuser Nozzle for dispersed

discharge of CO2, Discharge Time 12 Sec, Average

Discharge is 95%, Applicable on Class B, C and electrically

started Fire, Fire Rating 55B, Internal coating is not

applicable & External coating is of enamel spray painting,

Powder Coated Handle, Valve Confirm to IS 3224 ISI

Marked, CO2 Cylinder construction: hot spinning by

seamless pipes & bearing ISI mark, Body confirms to IS

7285 and PESO (Petroleum and Explosives Safety

Organization) APPROVED, Minimum Wall Thickness

to 4.2 mm, Extinguishers confirmed to IS 15683:2018 and

ISI marked. Referance Weight:-Gross Weight 16.4, empty

weight 11.9 Kg, 1. Necessary certificate & and guarantee

must be attached, 2. OEM has to provide wall mounting

heavy duty bracket/clamp, screw, hardware for installation.

Sr. Description Qty Unit Estimated Amount Amount

No. Figure in Words

3.Following printed marking Manufacturing Date and Expiry

Date must be mention on Extinguisher 4. Refilling period

must be of 5 Years. Following Printed marking on equipment

must be required:- Model No, Capacity, Gross Weight,

Content, Fire Rating, Batch No, Serial no, Mfg Month,

Refilling Due. [with necessary numbering / marking with oil

paint by painter as instructions given by G.S.P.H.C.L

engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

…………………………… G.S.P.H.C.Ltd

Contractors Signature Junagadh