Construction of 160 NOS LIG Flats In Sector -10 Greater Bareilly Housing Scheme, Bareilly.(Group-B)

Earth work in excavation in foundation in ordinary soil SOR S.I. No 251. Excavation in foundation in ordinary soil, loam, clay or sand including lift upto 1.5 m & lead upto 30m Including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches. (Excluding Royalty).

Providing and injecting chemical emulsion preconstructional Antitermite Treatment (i)Treatment For masonary and foundation 5ltr per sqm (ii)Back filling in immidiate contact with foundation 7.50 ltr per sqm (i)Treatment of top surface of plinth filling 5 ltr per sqm (i)Treatment juction of soil along external perimeter 5ltr per sqm (i)Treatment of soil under apron along external perimeter 5ltr per sqm

Earth work in cutting or in embankment in ordinary soil in 20 cm layers including ramming & dressing with 4.00 km cartage SOR S.I. No 253. Earth work in cutting or in embankment in ordinary soil, excavation to be in the regular pits not exceeding 0.5m in depth and earthwork in embankment to be in 20cm. layers, including ramming and dessing the surface to required levels & slopes & also including 1.5 lift & 30m. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. Distance as directed by the engineer incharge (Excluding Royalty).

Sand Filling in plinth SOR S.I. No 255.Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. from the site of work & including watering,dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work.(including royalty)

Concrete with 4cm(1/2"). Gauge brick ballast, fine sand of 1.25 fineness modulous and cement in proportion of 1:4:8 in foundation and under floor, including supply of all material labour and T&P etc. required for proper completion of the work. SOR S.I. No 275

R.C.C. work with.1 :1.5:3 cement coarse sans & 20 mm stone grit in Raft foundation SOR S.I. No 287 R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and includuing Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding Wire cost being included in the item.

R.C.C. work with.1 :1.5:3 cement coarse sans & 20 mm stone grit in Columns SOR S.I. No 289

R.C.C work with.1 :1.5:3 cement coarse sans & 20 mm stone grit in lighter Beam SOR S.I. No 285

R.C.C. work with.1 :1.5:3 cement coarse sans & 20 mm stone grit in lintel & sunshade SOR S.I. No 283A

R.C.C.work with.1 :1.5:3 cement coarse sans & 20 mm stone grit in Slabs SOR S.I. No 284

First class brick work In cenlent and coarse sand mortar In foundation and plinth Including supply of all nntcrlals, labour and TAP etc. required for proper cotnpletlon of the work. S.I. No 305.

First Class Brick work in 1:4 cement & coarse sand mortar in Super Structure in One Brick Thick wall S.I. No 305.+309+310(a)

First Class Brick work in 1:4 cement & coarse sand mortar in Super Structure in Half Brick Thick wall S.I. No 305.+309+310(a)

Painting bitumen on DPC 1.7 Kg/Sqm 85/50 or 85/25 all complete . P.W.D. SOR 2025 New Item No.1 Ch-7

Mild Steel or Iron work in Plain work Such as R.C.C.work S.I. No 504.

Mild Steel or Iron work in small size Such as fabrication of door & window grill S.I. No 502b.

Mild Steel or Iron work For fabrication of M.S. Grill and Stair case Railing door & window grill S.I. No 502C.

Mild Steel or Iron work Z section for window grill S.I. No 502b.

12 mm Thick Plaster with 1:5 Cement & Coarse Sand Mortar S.I. No.584 (i)

Providing and laying of 25 mm thick kota Stone completion of work as SOR ,Flooring New Item No 1.ch 14

Supply & fixing of 5 mm Thick Glass Panes with putty and nails DSR no.14.5.2

Supply & fixing of Flush Doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooken cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handle, springs and other fittings but excluding their supply and including painting with two coats of Black Japan paint on all iron fitting if necessary 32mm thick. P.W.D. SOR Item No. 470 (i)

Providng & fixing Oxidised M.S.Fittings SOR 2025 Ch.-9/DSR 9.62 Sliding Bolt 16 mm dia 250 mm long with nuts & bols ( DSR 9.62.2

Tower bolt with 10 mm dia rod 250mm long

Tower bolt with 10 mm dia rod 150mm long

Door Handles 125mm long with screws

Finishing wall with acrylic smooth paint of required shed two or More coat applied @ 1.67 liter per 10 sqm over and including base coat of water proofing cement paint applied 2.20 kg per 10 sqm DSR 13.46.1

Finishing wall with Premium acrylic smooth exterior paint of required shed two or More coat applied @ 1.67 liter per 10 sqm over and including base coat of water proofing cement paint applied 2.20 kg per 10 sqm DSR 13.47.1

Providing & Applying white cement based putty of average thickness 1mm of approved brand 7 manufacturer, over the plasteredwall surfaceto prepare the surface even & smooth ( DSR No. 13.80)

Painting on New Surface with one priming coat and two coats of synthetic enemel paint all complete S.I. No 1+2+3 (iii). (a) Over new wood surface SOR S.I.No.1+2+3 Chapter 15

(b) Over new steel surface SOR S.I.No.1+2+3 Chapter 16

Supply of 50mm size approved 7 layers locks (Market Rate)

Numbering of flate 8cm to 15 cm As par SOR S.I. No.819

Providing & Laying Brick Koba As par SOR S.I. No.New 1Chapter11

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. PWD SOR 2025 Item No. 11.41.2

Providing & Fixing 18mm thick Gang Saw cut mirror polished Udaypur Green Marble On Slab( DSR No. 8.2.1.2 )

Part - B Water Supply And Sainatory Work Providing & fixing 15 mm dia CPVC Pipes B Class A. Consealed in walls ( DSR No. 18.8.1)

B. Exposed on walls( DSR No. 18.7.1)

Providing & fixing 20mm dia CPVC Pipes B Class A. Consealed in walls ( DSR No. 18.8.2)

B. Exposed on walls( DSR No. 18.7.2)

Providing & fixing 25mm dia CPVC Pipes B Class A. Consealed in walls ( DSR No. 18.8.3)

B. Exposed on walls( DSR No. 18.7.3)

Making water connection of G.I. Pipe Line with PVC Main DSR 18.13.1

Providing & fixing 15mm dia nominal bore Bib Cock( DSR No. 18.15.1)

Providing & fixing 15 mm dia nominal bore Brass Stop Cock ( DSR No. 18.16.2

Providing & fixing 20mm dia nominal bore Gun metal Gate ValveWith C.I. wheel ( DSR No. 18.17.1A)

Providing & fixing 25mm dia nominal bore Gun metal Gate ValveWith C.I. wheel ( DSR No. 18.17.1)

Providing & Placing on Tarrace low density water tank 500 litre capacityfixing 25mm dia nominal bore Gun metal Gate ValveWith C.I. wheel ( DSR No. 18.48)

Providing & fixing 470x420 mm bowl depth 178mm Stainless Steel Kichen sink ( DSR No. 17.9)

Providing & fixing 580x440 mm white vitreous China Orissa pattern W.C. squatting Pan ( DSR No.17.1.1)

Providing & fixing 580x440 mm white vitreous China Wash Basin including making al connections but excluding the cost of fittings flat back of size 550x400mm ( DSR No.17.25.2)

Providing & laying and jointing 150mm dia S &S RCC hume Pipe NP-2 class ( DSR No.19.6 )

Constructing masonry chamber 60x60x75cm inside in brick work in cement mortar 1:4 (1cement & :4 coarse sand) for sluice vavle, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size), I/C necessary excavation, foundation concrete 1:5:10 (1 cement:5 fine ksand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12mm thick, finised with a floating coat of neat cement complete as per standard design. ( DSR No. 18.36.1)

Making connection of Drain or sewer Line with existing manhole For Pipe 100 to 250 mm dia ( DSR No.19.21.1

Providing & fixing 100 mm SW pipe class SP-1 including rubber ring ( DSR No.19.1 )

S/F of 10cm dia of PVC down pipe complete with rose heads bends M.S clamps 2.5 cm X 3 mm fixed to walls by 15 cm long 6 mm dia nail including repairing of plaster, pointing etc including supply of all materials, labour T&P ctc. required for proper completion of the work.(PWD SI no 730B) 6 kg/sqcm Pressure pipe

S/F of 15cm dia of PVC down pipe complete with rose heads bends M.S clamps 2.5 cm X 3 mm fixed to walls by 15 cm long 6 mm dia nail including repairing of plaster, pointing etc including supply of all materials, labour T&P ctc. required for proper completion of the work.(PWD SI no 730A) 6 kg/sqcm Pressure pipe

Part - C Internal Electrification Wiring for light point/ fan point/ exhaust fan point/ |Call bell point with 1.5 sa.mm FRLS PVC insulated |Copper conductor single core cable in surface recessed medium class PVC conduit, with modularswitch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. asrequired.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable ir surface/ recessed medium class PVC conduit alongwith 1 No. 4 sg. mm FRLS PVC insulated copper conductor single core cable for looo earthing as reauired.

Wiring for circuil submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 1.5 sq.mm. + 1x 1.5 sq.mm. Earth wire

2 x 6 sg.mm. + 1x 6 sg.mm. Earth wire

4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed Iconduit as required 20 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etce, as required

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but lexcludina modular plate ete. as reguired.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding Imodular plate as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted Including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4+ 12), Double door. horizontal type

6 way (4t 18), Double door, horizontal type

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DE complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

Supplying & fixing single pole, blanking plate in the existing MCB D complete elc. as required.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outet, with 4 pole and earth, meta enclosed plug top along with 20 A "C" curve TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socke out let and complete with connections, testing and commissioning etc. as required.

Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre lang etc. with charcoall coke and salt as required.

Supplying and laying 25 mm X 5 mm G.l strip al 0.50 metro below ground as strip earth electrode, including connection/ terminating with G.l. nut bolt, spring. washer atc. as required. (Jointing shall be done by overlapping and with 2 sels of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.l, strip in 40 mm dia G.l. pipe from earth electrode including connection with G.l. nut, bolt, spring, washer excavation and re-filling etc. as required.