REPAIR TO COMPOUND WALL, CHAIN LINK FENCING, GATES ETC AT JCOs OR MD ACCN UNDER AGE (I) LANSDOWNE.

Amount

Demolition of brick masonry built in cement mortar incl quoins arches pillars etc complete all as specified and directed.

M&L for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified.

M&L renderig/screeding 15mm thick cment mortar 1:4 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge.

M&L preparing newly plastered surfaces ,and applying 2 coats of cement base paint on walls over one coat of alkali resistant primer complete all as specified and directed.

Dismantling wrought iron or mild steel work or SS work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

M&L Framed work such as grills gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling posts or structs (Wood,steel or R.C.C.) any section including taking out embeded portion and making good disturbed ground in natural ground complete all as specified and directed.

M & L for cement concrete 1:2:4 type B 2 using 20 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

Dismantling fencing wire mesh/barbed wire (in four layers) , any type complete all as specified and directed.

S & F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc., (cut to ordinary lengths i.e. Within 20 mm of the length as indicated) in Fe-410W Gde E-250 quality 'B' complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

S & F 11 to 15 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with length of bolt exc 5 cm but n exc not exc. 10 cm long and 11 to 15 mm dia of neck complete all as specified and directed.

M & L mild steel round bars 10 mm dia and over of Fe-290 (Gde E-165) and over cut to length bent to shape required including cracking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire not less that 0.9 mm dia or securing with clips complete all as specified and directed.

S & F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

Supply only chain link MS galvanised fencing, any size and type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc., including provision of binding wire complete all as specified and directed.

M/S Balaji Builders (BID ID -3513206)