PROVN OF DECENTRALISED SEWAGE SYSTEM AND ALLIED INFRA WITH 5 PACKAGED TYPE STP FOR MIL STN DHRANGADHRA (JOB NO 08/AMWP/12C/2021-22)

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 30

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATIONS" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33

Lump sum price worked out by the contractor for "ROAD & PATH" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36

Lump sum price worked out by the contractor for "SEWAGE NETWORK" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 37

Lump sum price worked out by the contractor for "FENCING, COMPOUND WALL & GATE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 40

Lump sum price worked out by the contractor for "STP" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY / TREATED WATER" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 44

Lump sum price worked out by the contractor for "DG SET" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 45

Sch 'A' PART-XII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY S&F 15 mm bore, fancy type, CP brass bib cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.

S&F 20 mm bore, fancy type, CP brass angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.

S&F 20 mm bore, fancy type, CP brass concealed stop cock, regular body with adjustable wall flange, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.

S&F overhead shower 80 mm dia of ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and directed. Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.

S&F 15 mm bore, fancy type, CP brass pillar cock, quarter turn, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.

S&F health foucet with 1.0 m long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.

S&F 15 mm bore CP cast copper alloy body wall mixer for overhead shower connection with 115 mm long bend pipe on upper side, connecting leggs & wall flanges complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.

S&F PVC connection 600 mm long of size 15 mm with PTMT nut fittings brass complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'C'.

INTERNAL ELECTRIFICATION S&F LED bulb 10 Watt AC 240 Volts complete all as specified and directed.

S&F building security light luminaries 25 Watt with wall mounting bracket of suitable size and clamps, nut bolts etc having pressure dia cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses IP65 prewired complete all as specified and directed.

ROAD & PATH M & L 150 mm thick (compacted thickness) WMM in two layers each of 75 mm thick (each layer to be rolled and consolidated separately) confirming to the grading given in table 400-13 & physical requirement given in table 400-12 spread by mechnically means & rolled by using 8-10 ton vibrator power rolled over compacted surface of soling as specified in clause 406.3.5 of MORT&H specification complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows tec. and the like n. exc. 15 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with 20% glass beds (intermixed) spread and laid by automatic mechanical machine engine at approximate temprature 160 dfegree celcius with special applicator machine as per manufacturers instruction complete all as specified and directed.

S&F solar stud 125mmx125mmx25mm with shank of 56.8mm) made out of aluminium alloy, Die casted dynamic alloy, shell powered by solar cells and panels ideal signal product for highways with following specification :- (i) Solar panel mono crystaline solar 2.4V/03 watt. (ii) One Ni-mh or Ni-od rechargable battery. (iii) Six super bright LEDs. (iv) Colour - yellow or approved by Engr-in-Charge. (v) Make - DARK EYE or equivalent.

SEWAGE NETWORK M&L for DWCPE pipe of class SN8 complete laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring and tested complete all as specified in IS 16098:2013 complete all as specified and as directed following size of pipe:-

Nominal dia 150 mm

Nominal dia 200 mm

Nominal dia 250 mm

NOTE FOR ITEM NO 26.00 TO 26.03:- (i) Inner & outer dia shall be as per IS code. (ii) Stiffness class of the pipe shall be of SN8.

M&L for construction of PCC Block Masonry MANHOLE of size 900mm X 800mm X 800mm (MH-1) including excavation in any type of soil, PCC 1:4:8 type D2 in foundation, PCC 1:2:4 type B1 in surface channels and drains & PCC Block masonry with Blocks of 1:3:6 mix built in CM 1:4, 15 mm thick rendering in CM 1:3 finished even and smooth with using integral water proofing liquid complete all as specified and shown on drg.

M&L for construction of RCC MANHOLE including excavation in any type of soil, PCC 1:4:8 type D2 in foundation, PCC 1:2:4 type B1 in surface channels and drains & RCC design mix M-30 grades in floor slab, wall including reinforcement and formwork complete, 15 mm thick rendering in CM 1:3 finished even and smooth with using integral water proofing liquid and 900 mm dia FRC HD-20 Grade Manhole cover (Clear opening 600 mm ) incl mild steel frame etc, returning filling in and removal of surplus excavated soil to a distance n exc 500m complete all as shown on drgs of size :-

RCC CIRCULAR MANHOLE (MH-2) average depth 1.25 m

Extra depth over average depth of 1.25m depth of RCC CIRCULAR MANHOLE (MH-2)

RCC CIRCULAR MANHOLE average depth 1.75m (MH-3)

Extra depth over average depth of 1.75m depth of RCC CIRCULAR MANHOLE (MH-3)

RCC CIRCULAR MANHOLE average depth 2.5m (MH-4)

Extra depth over average depth of 2.5 m depth of RCC CIRCULAR MANHOLE (MH-4)

RCC CIRCULAR MANHOLE average depth 3.5m (MH-5)

Extra depth over average depth of 3.5m depth of RCC CIRCULAR MANHOLE (MH-5)

M&L for construction of RCC Flushing Tank including excavation in any type of soil, PCC 1:4:8 type D1 in founadtion & RCC Design Mix M-30 grade as in slab, wall etc including reinforcement & formwork complete, 15 mm thick rendering in CM 1:3 finished even and smooth with using integral water proofing liquid and returning filling in and removal of surplus excavated soil to a distance n exc 500m complete all as shown on drgs.

SEWAGE TREATMENT PLANT (STP) (a) Design, Supply, construction, installation, testing & commissioning of 250 KLD Sewage Treatment Plant (STP) package type excluding civil works, which is covered in item No 4 of Sch 'A' Part I, based on principle of aerobic attached growth non-clogging randomly Moving Bed Bio-reactor (MBBR), including required foundations, covering of all motors with MS sheets covers & the following:-

(b) One no. Fine bar screen of MS epoxy construction as per given minimum specifications, to be installed in Fine Bar screen chambers, provided at an angle of 60° to prevent floating objects passing through it and subsequently removing manually and dumped for further disposal (c) One lot. Equalisation tank of air grid for equalization tank for providing aeration in the tank, as specified in PS (d) Two nos. raw sewage pumps complete with motor and all necessary accessories and fittings, to be installed for transferring sewage from equalization tank to process reactor. Level sensor should be provided in the tank and interlinked with pumps for ON-OFF operation as per water level in the tank. One pressure gauge for each pump has to be provided to measure pressure at the outlet. (e) Two nos. Air blower complete with motor and all necessary accessories & fittings, for providing air in equalization tank, MBBR reactors & Sludge holding tank. One no. Air rotameter is to be provided in each line to MBBR reactor 1 & 2, EQT & SHT for measurement of quantity of air. (f) One lot of anoxic chamber in MSFRP construction with internals comprising of media and MSEP Mixer.

(g) Two lot of MBBR Tank in MS FRP construction with internals comprising of media, SS air grid & SS rise pipe, media retaining sieves, etc. (h) One Lot of Tube settler tank in MS FRP construction with internals comprising of media, supporting structure & collection trough. (j) Two nos. sewage centrifugal monobloc self-priming recirculation pumps complete with motor and all necessary accessories and fittings. One pressure gauge for each pump is provided to measure pressure at the outlet. (k) One no. Chlorine Contact cum Filter feed tank in in MS FRP construction, as per given specifications. With one set of chlorine dosing system comprising of solution tank and dosing pumps, as specified in PS, with necessary connection for dosing of solution in chlorine contact tank. (l) Two nos. filter feed centrifugal monobloc pumps complete with motor and all necessary accessories and fittings for feeding tertiary unit, Level sensor should be provided in the chlorine contact cum filter feed tank and interlinked with pumps for ON-OFF operation as per level in the sump. One pressure gauge for each pump is provided to measure pressure at the outlet. (m) One no. Dual Media filter, complete with media multiport value, frontal piping, valve and pressure gauges to measure pressure across the filter. (n) One no. Activated Carbon Filter of, complete with media multiport value, frontal piping, valve and pressure gauges to measure pressure across the filter.

(o) One no. Treated Water tank in MS FRP construction, to receive supernatant coming from tertiary treatment plant, as per given specifications. Size of tank to be provided as per drawing. (p) Two nos. sludge transfer self-priming monobloc pumps complete with motor and all necessary accessories and fittings. One pressure gauge for each pump has to be provided to measure pressure at the outlet. (q) One no. Continuous feed sludge screw press / Sludge Bag with dosing system for sludge dewatering system as specified in PS (r) One no. electrical control Panel for operation of all electromechanical units of sewage treatment plant. (s) One lot of suitable size Piping & valves of suitable material to interconnect various units as per site layout. (t) One lot of Power & control cables to interconnect various drives and instrumentations with STP panel. (u) One no. Sludge Holding Tank in MS FRP construction, as per given specifications, to receive sludge from tube settler by PUMP, complete with air Grid as specified in PS. Notes:- (i) The pump and motor capacity / size & head shall be provided as per plant capacity and as required technical data to run pump sets. (ii) Quantity of Chlorine shall be provided as per OEM recommendations for first one year. The cost of the same shall deemed to be included in the uoted rate. (ii) The cost of earth work, PCC work etc for pump sets and starter panel foundation shall deemed to be included in the uoted rate. (v) Two nos. sludge transfer self-priming monobloc pumps complete with motor and all necessary accessories and fittings, Level sensor should be provided in the sludge holding tank and interlinked with pumps for ON-OFF operation as per level in the sump. One pressure gauge for each pump has to be provided to measure pressure at the outlet.

All as per Item No 30.00 to 30.03(t) (except 30.03 (u) & (v)) hereinbefore but 170 KLD STP Package type complete all as specified and directed.

All as per Item No 30.00 to 30.03(t) (except 30.03 (u) & (v)) hereinbefore but 70 KLD STP Package type complete all as specified and directed.

All as per Item No 30.00 to 30.03(t) (except 30.03 (u) & (v)) hereinbefore but 35 KLD STP Package type complete all as specified and directed.

S&F stainless steel grade (SS-304) pipe with all fittings and fixtures for provision of air grid including necessary welding, joints etc. complete all as specified & directed for following dia of pipe:-

80 mm dia

50 mm dia

20 mm dia

Supply, Installing, testing and commissioning of coarse bubble diffusure 150dia, bubble size 5mm Disc type with stainless steel grade (SS 304) to provide clog-free oxygen for Equalisation Tank & MBBR TANK 1 & 2 complete all as specified and directed.

S&F Gate valve flanged type, confirming to IS 13114 suitable for followingsize of pipe complete all as specified and directed.

40 mm bore

50 mm bore

80 mm bore

100 mm bore

S&F Air release valve double( isolated type) with flanged ends suitable for 80 mm bore tube,size 25mm dia ISI (IS 14846) marked complete all as specified and directed.

M&L for MBBR media made of poly propylene with MOC virgin PP UV black specific gravity 0.90 to 0.95 gms/sqcm, density 0.93, size 15x22mm complete all as specified and directed.

M&L for Tube Settler modules made of PVC, Size 75x60mm cross section area ,height 750mm thickness 1.0mm, Shape hexagonal Chevron complete all as specified and directed.

S&F cast iron double end flanged and drilled non return valve (NRV) conforming to IS - 5312 suitable for following size of pipe complete all as specified and directed.

80 mm bore

50 mm bore

Supply, installation, commissioning and testing of non-clog Submersible sewage Pump set (Two working + one standby) with cutter version to pump sewage from equilisation tank to areation tank at uniform flow rate, having Discharge 300 LPM at a head of 10metre suitable size bore, 415V (+ 5% & +10%) & frequency 50Hz . (For Equalisation Tank).

Material of Construction:- Pump and Motor body: Stainless steel AISI-316 grade, Impeller: stainless steel AISI 316, Shaft: stainless steel AISI 316/420, Sealing: double Mechanical seal arrangement. (a) Dry run protection. (b) Industrial type electronic liquid level controllers with stainless steel probes/sensors or float switch for automatic operation. (c) 1 No of pressure guage 1" dia with valve tee and fittings. (d) Alarm indication with signal in the event of pump failure etc. (e) Delivery pipe 80mm dia MS pipe medium grade from pump set to existing delivery pipe flanged type complete with all fitting suitable foundation work for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of butterfly valves and non return valve all as required.

Supply, installation, commissioning and testing of Centrifugal Pump set (Two working + one standby) to feed semi tested water to secondary treatment process through sand pressure filter, active carbon filter having Discharge 300 LPM at a head of 15metre suitable for delivery pipe 80 mm bore, 415V (+ 5% & +10%) & frequency 50Hz . (For clear water to filter).

Material of Construction:- Pump and Motor body: Stainless steel AISI-316 grade, Impeller: stainless steel AISI 316, Shaft: stainless steel AISI 316/420, Sealing: double Mechanical seal arrangement. (a) Dry run protection. (b) Industrial type electronic liquid level controllers with stainless steel probes/sensors or float switch for automatic operation. (c) 1 No of pressure guage 1" dia with valve tee and fittings. (d) Alarm indication with signal in the event of pump failure etc. (e) Delivery pipe 80mm dia MS pipe medium grade from pump set to existing delivery pipe flanged type complete with all fitting suitable foundation work for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of butterfly valves and non return valve all as required.

Supply, installing, testing and commissioning of mono block type screw pump (one working + one standby) with cutter version to pump sewage from sludge holding tank to sludge drying bed at uniform flow rate having discharge of pumping set 100 LPM at 5mtr. The pump shall be coupled to the suitable electrical motor, mounted on a common base frame. (For Sludge transfer to Sludge drying beds)

Supply, installation, testing and commissioning automatic hypo dosing unit with automatically opearted dosing pump etc. One no single FRP cylinder type chemical solution tank of 300 liters capacity having detachable lids with mounted inserts for mounting of pumps and strirrer.The electronic pump shall be operated on 220V single phase supply. Complete set of pipes, valves and fitting, foot valve magnetic float switch to trip the dosing pimp at low level of chemical in the tank. The free chlorine content in the filtered water shall not be less than 0.5 PPM:- (i) Min Actuating pressure - 0.3kg/sqcm (ii) Max working pressure - 0.5kg/sqcm (iii) Voltage - 150 to 270 VAC, 50 Hz (iv) Flow range - 6.25 LPH (v) Head- 5-10 meter.

Supply, installing, testing and commissioning of twin lobe design type air blower complete with motors of capacity 200 Cum/hour, 415 V, 3 Phase, 50 Hz including butterfly & NRV, V belt, safety valve, pressure guage, inter connection piping including necessary cable connection with suitable size from starter to Air Compressor assembly of (10HP).

Supply, installing, testing and commissioning of bar Screen Unit 900 x 1000 mm size consisting of 2 Nos of bar screens made of 30x10 mm Strips spaced at a center to center distance of 30 mm and fixed at an angle of 60 degrees to horizontal, all bar strips firmly welded to single frame of angle 50x6x6 mm as shown in drawings, entire bar screen unit is made in stainless steel 304 grade material and bolted to side walls, using anchor bolts of SS 304 material in the middle of bar Screen chamber.

S&F of lint Catcher Screen size 6 mm x 200 mm x1000 mm, in SS 304 material, in MBBR-1, MBBR-2 & tube settling tank.

S&F Electromagnetic Flowmeter.

Supply, fixing and commissioning of factory fabricated multi media filter (MMF), cylinderical shape mild steel construction, epoxy coated of capacity 20000 LPH at 20 metre head with supporting layers of pebbles and graded quartz gravels as filter media with & including suitable staging as per manufacturers instructions complete.

Supply, fixing and commissioning factory fabricated activated carbon filter (ACF), cylinderical shape mild steel construction, epoxy coated of capacity 20000 LPH at 20 metre head with activate carbon layers as filter media with & including suitable staging as per manufacturers instructions complete.

Supply, installing, testing and commissioning of horizontal single stage centrifugal monoblock sludge reculation pump set with CI body, CI impeller, coupled with totally enclosed, 415volts, 1500 RPM, 3 phase, 50Hz AC supply complete piping, valves, non return valve fittings etc as required. (For nitrate recirculation) (2 HP) Note:- Delivery pipe: suitable size MS pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of butterfly valves and non return valve all as required.

Supply, installing, testing and commissioning of submersible mixer ROTOR (one working+ one stand by), material stainless steel body, 3 phase AC supply 50 Hz complete all as specified. (for sludge mixing) (1 HP)

S&F of dial type air pressure gauge with isloation cock 1" dia pressure rating 0.5kg/sqcm.

S&F dial type water pressure guage 1" dia with all fitting.

EXTERNAL WATER SUPPLY / TREATED WATER Supply, installation, commissioning and testing of treated water transfer pumps Consisting of centrifugal type pumps(one working + one standby) to transfer STP treated water for arboriculture uses, having Discharge 500 LPM at a head of 28 metre suitable for delivery pipe 80 mm bore, 415V (+ 5% & +10%) & frequency 50Hz.

Material of Construction: Pump and Motor body: cast iron, Impeller: cast iron (a) Dry run protection. (b) 1 No of pressure guage 1" dia with valve tee and fittings. (c) Alarm indication with signal in the event of pump failure etc. (d) Delivery pipe 80mm dia gi pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including foundation work fixing of butterfly valves and non return valve all as required.

S&F HDPE pipe for treated water supply complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc complete as all specified and directed of 80mm bore of pipe.

S&F butterfly valve conforming to IS:13095-91 including necessary companion flanges, bolts and nuts for following sizes:-

80 mm dia

50 mm dia

25 mm dia

M&L for Construction of brick masonry valve chamber of internal size 750 x 750 x 750mm suitable for 80mm dia sluice valve including necessary earth work in any type of soil, PCC 1:4:8 type D2 in foundation using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 25 x 25 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc, complete all as specified and directed.

S&F cast iron double end flanged and drilled non return valve (NRV) conforming to IS - 5312 suitable for following size of pipes complete all as specified and directed:-

80 mm bore

50 mm bore

S&F cast iron double end flanged pressure reducing valve EN 1074 IS-7005 suitable for following size of pipes complete all as specified and directed:-

80 mm bore

50 mm bore

Supply, installation, commissioning and testing of treated water transfer pumps Consisting of centrifugal type pumps (one working + one standby) to transfer STP treated water for arboriculture uses, having Discharge 350 LPM at a head of 20 metre suitable for delivery pipe 80 mm bore, 415 Volts (+ 5% & +10%) & frequency 50Hz

Material of Construction: Pump and Motor body: cast iron, impeller:cast iron (a) Dry run protection. (b) 1 Nos of pressure guage 1" dia with valve tee and fittings. (c) Alarm indication with signal in the event of pump failure etc. (d) Delivery pipe 80mm dia gi pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including foundation work fixing of butterfly valves and non return valve all as required.

Supply, installation, commissioning and testing of treated water transfer pumps Consisting of 2 Nos centrifugal type pumps(one working + one standby) to transfer STP treated water for irregation / arboriculture uses, having Discharge 350 LPM at a head of 15metre suitable for delivery pipe 80 mm bore, 415V (+ 5% & +10%) & frequency 50Hz.

Material of Construction: Pump and Motor body: cast iron, Impeller: cast iron (a) Dry run protection. (b) 1 Nos of pressure guage 1" dia with valve tee and fittings. (c) Alarm indication with signal in the event of pump failure etc. (d) Delivery pipe 80mm dia gi pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including foundation work fixing of butterfly valves and non return valve all as required.

Supply, installation, commissioning and testing of treated water transfer pumps Consisting of centrifugal type pumps(one working + one standby) to transfer STP treated water for irregation / arboriculture uses, having Discharge 200 LPM at a head of 13metre suitable for delivery pipe 50 mm bore, 415V (+ 5% & +10%) & frequency 50Hz

Material of Construction: Pump and Motor body: cast iron, Impeller: cast iron (a) Dry run protection. (b) 1 Nos of pressure guage 1" dia with valve tee and fittings. (c) Alarm indication with signal in the event of pump failure etc. (d) Delivery pipe 50 mm dia gi pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of butterfly valves and non return valve all as required.

Supply, installation, commissioning and testing of treated water transfer pumps Consisting of centrifugal type pumps(one working + one standby) to transfer STP treated water for irregation / arboriculture uses, having Discharge 150 LPM at a head of 5metre suitable for delivery pipe 50 mm bore, 415V (+ 5% & +10%) & frequency 50 Hz.

Material of Construction: Pump and Motor body: cast iron, Impeller: cast iron (a) Dry run protection. (b) 1 Nos of pressure guage 1" dia with valve tee and fittings. (c) Alarm indication with signal in the event of pump failure etc. (d) Delivery pipe 50mm dia GI pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including foundation work fixing of butterfly valves and non return valve all as required.

EXTERNAL ELECTRIFICATION M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

S&F energy efficient LED street liight fitting of 35/36 watt epoxy powder coated pressure die cast aluminium housing and toughened glass with IP 66 degree of protection including nuts, bolts, fixtures for fixing LED light fittings, system luminous efficiency more than 100 lumens per watt 50000 BURENING HRS, individual LED's should have lenses for better throw across and along road, PF>0.9 with voltage range 140 to 270 volt, fitting should be provided with 5 KV surge protection, short circuit and over voltage protection facility for Driver and fitting including GI bracket and nuts and bolts etc making electrical connection all as directed.

S&F Motor control panel cubical type of suitable size, 415 volt, factory made CPRI approved dust proof vermin proof (Kiosik type) for outdoor use made out of CRCA sheet 3.15 mm thick exept inner sheath OG 2 mm powder coated, machine pressed, both side opening in two halves with provision of rubber beading and locking system, inciuding aluminium bus bar of 100 Amp capacity, 4 strip mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers each MCCB/ cubical switch shall have be compartment type and independent opening, panel should be mounted on angle iron frame and legs (vertcal height of legs not less than 30 cm exept in PCC) made from angle of size 50x50x5 mm, frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer legs grouted in PCC(1:3:6) type B-2(using 40 mm graded stone aggregate) complete including all connection/ control wiring with suitable size of copper conductor cable, including danger notice sticker, comprising the following accessory including testing complete all as specified. (For 400 KLD STP)

(a) MCCB 100 Amp 25 kA, 4 pole, Icu=100% Ics - 01 No. (Incomer) (b) MCB 25Amp 10 kA, TP, Icu=100% Ics -03 Nos. (Outgoing blower) (c) MCB 10 Amp 10 kA, TP, Icu=100% Ics - 03 Nos. (Outgoing for pump) (d) MCB 6 Amp 10 kA, TP, Icu=100% Ics - 12 Nos. (Outgoing for pump) (e) MCB 6 Amp 10 kA, SP, Icu=100% Ics - 6 Nos. (Outgoing light) (f) DOL Starter for 0.5hp Motor - 04 Nos (g) DOL Starter for 3hp Motor - 03 Nos (h) DOL Starter for 2 hp Motor - 08 Nos (j) Star Delta Starter for 10 hp Motor - 03 Nos (k) Single phase preventer-18 Nos (l) R,Y,B Indicators -01 Set (m) Digital Amp meter (0-100) Amp incl necessary CTs (set of three) - 1 set (n) Digital volt meter (0-500V)-01 No

S&F factory made junction box of size 275 x 200 x 100 mm with suitable capacity of aluminium bus bar 4 Nos with supporting insulators and including nut & bolts etc complete for street light fixed on pole with suitable clamps, made out of Sintex sheet having front hinged shutter with lockable arrangements, outdoor type, weather proof duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer, having the provision to connect incoming and outgoing cable of size 10 sqmm 4 core and one number MCB SP 6 Amp 10 KA, 240 volts and earthing point complete all as specified and directed.

Supplying, laying PVC insulated & sheathed armoured copper conductor cable of size 3 core 1.5 sqmm for connection complete all as specified and directed.

S&F Electromagnetic Flowmeter Digital Type with graphical display complete all as specified and directed.

DG SET Supply, install, testing and commissioning of Diesel Engine Gererating Set, 40 KVA,1500 RPM, 3 phase, 415 V, 50 Hz, power supply alternator along with fuel tank, control panel, battery and complete set installed in sound acoustic enclosure and standard accessories and fittings with power factor 0.8, PCC foundation suitable for the generator set as per manufacturer's instructions, tools and spares complete all as specified and directed and comprising of the following:-

a) Engine:- Diesel engine, cylinder engine developing required BHP @ 1500 RPM for continuous duty of suitable for 40 KVA alternator with provision of 10% over load for one hour in every 12 hour running confirming to BS 5514/ISO 3046 standard Totally enclosed, electric star, compression ignition, 4 stroke. The engine shall consists of following specification:- (i) Fly wheel to suit flexible coupling with starter ring, cooling radiator with blower fan, fuel houses, mico fuel pump with mechanical governor,oil bath type air cleaner, exhaust silencer, SS expansion bellow, lubricating oil fitler, fuel oil filter, 24 V electric starting system, battery charging alternator, engine control panelcosisting of ON/OFF START key, lub oil pressure guage, water temp guage,ammeter basttery charging safely divices such as:low lubricating oil pressure, light water temperature ect as per standards. (ii) Instrument panel consisting of- Starting switch with key lubricating oil, temperature guage, lubricating oil pressure gauge, water temperature guage, battery charging indicating lamp, hour meter with RPM indicator, safety control against high temperature of water, over speed stop with double driver adopter.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR 2009 Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of strata, PCC 1:3:6 type C1 in chamber, precast RCC cover 50 mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4 Kg/Sqm) with cast iron frame, funnel with wire mesh, 20 mm bore GI pipe medium grade watering pipe, lugs, 40 mm bore GI pipe medium grade protection pipe up to 7.5 m. NOTE:- Item includes the cost of earth lead and GI protection pipe up to 7.5 m. GI strip and protection pipe beyond 7.5 m shall be measured and paid for separately.

ARBORICULTURE Supply and ploughing the following species of well grown (two year grown) healthy tree sapling with good root system & height as mentioned below and M&L, excavating a pit of size (450mm x 450mm x 450mm) pit, refilling with sweet earth mixed with manure in the ratio of 3:1 by volume in addition 2 Kg of neem khali/cake, cowdung including watering and spraying pesticides etc as specified. Notes:- (i) Supply only (a) vermi compost (b) sweet earth (c) insecticides and pesticides etc shall be measured and paid separately under relevant items. (ii) Security amount of 20% of the cost of the items shall be retained with the Deptt till end of the defect liability period.

Sitaphal (4 feet to 5 feet)

Bouiganvillea (4 feet to 5 feet)

Ashoka (4 feet to 5 feet)

Palm (4 feet to 5 feet of Different species types)

Mango (4 feet to 5 feet)

Guava (4 feet to 5 feet)

Cheeku (4 feet to 5 feet)

Neem (4 feet to 5 feet)

Jammun (4 feet to 5 feet)

Supply only approved vermi compost (Per 50 Kg bag) of best quality complete all as specified.

Supply and stacking of well decomposed cow dung including rayalty loading unloading transportation and stacking at site complete all as specified and as directed. Note : for the purpose of payment the stack measurement shall be reduced by 10% for voids.

Removal of masonary waste and other undesirous material and its disposal away from site complete all as specified and as directed.

Supply of good sweet earth for tree plants and for other landscaping works brought from outside MD land and including royalty and carriage for all leads complete all as specified and as directed.

Supply of following Insecticides, pesticides etc at site for store in dust/liquid form complete all as specified and as directed.

Chloropyriphos-20% EC

Neem khali in form of cake

Stacking of Gypsum 50 Kg bag

Stacking of DAP at site

S&F tree guards made of welded steel wire fabric (150x100mm) supplied and fixed complete to wood or steel members and supported with flat iron (25x6mm) fillet (for securing the mesh) and three legs in angle iron (30x30x5mm) welded to the tree guard below and inserting it into ground all as specified and directed and preparation of new surface and priming with red oxide zinc chrome and applying two coat of paint with synthetic enamel (ordinary tint) including earthwork and PCC 1:3:6 type C1 of size 0.30 x 0.30 x 0.45 m complete all as specified and directed.

Supply only 20mm dia PVC pipe hight quality for purpose of horticulture complete all as specified and directed.

Supply only rotory type sprinkler made of brass with MS stand and suitable for 20mm dia pipe complete all as specified and directed.

Supply and laying/planting of green well grown healthy lawn in rows with good root system, pitching @ 150mm c/c including surface excavation, removing waste soil, laying spreading one layer (minimum 15cm) of black cotton soil mixed with sweet earth and jaivik manure including watering and spraying pesticides etc as specified including replacement of dead grass and regular maintenance till the completion of maintenance period of two year complete and minimum 3 visits per month, including watering complete all as specified and directed. Note:- Security amount of 20% of the cost of the item shall be retained with the Deptt till end of the defect liability period.

Regular maintenance of trees speciman plants and other similar plants till the completion of 02 years maintenance period including replacement of dead plant of same height and including watering, training, pruning, hoeing, weeding stacking insect pest management, cleaning of nearby area and disposal of waste away from site, Quarterly enrichment with manure @ 0.015cum per pit with minimum 03 visits per month complete all as specified and directed. Note : Manure shall be measured and paid separately in relevant items.

Outsourcing of manning and management and operation including routine maintenance of STP 400 KLD at Mil Stn Dhrangadhra all as specified, by providing minimum 02 operators per day including Sundays and holidays complete all as specified and as directed.

Outsourcing of manning and management and operation including routine maintenance of STP 250 KLD at Mil Stn Dhrangadhra all as specified, by providing minimum 01 operator per day including Sundays and holidays complete all as specified and as directed.

Outsourcing of manning and management and operation including routine maintenance of STP 170 KLD at Mil Stn Dhrangadhra all as specified, by providing minimum 01 operator per day including Sundays and holidays complete all as specified and as directed.

Outsourcing of manning and management and operation including routine maintenance of STP 70 KLD at Mil Stn Dhrangadhra all as specified, by providing minimum 01 operator per day including Sundays and holidays complete all as specified and as directed.

Outsourcing of manning and management and operation including routine maintenance of STP 35 KLD at Mil Stn Dhrangadhra all as specified, by providing minimum 01 operator per day including Sundays and holidays complete all as specified and as directed.

NOTES OF ITEM NO 86.00 to 90.00 (a) Number of operators as given in item No 86.00 to 90.00 are minimum requirement as assessed by the department. If more number of operators are considered necessary by the bidder for smooth functioning of sewage Treatment Plant (STP), the same shall be engaged by the bidder without any extra cost to Govt. Rate shall be deemed quoted accordingly. (b) Cost of rectification of defects including replacement of spare parts (if any) shall be deemed included in cost of main STP items. (c) Cost of MBBR media, chemicals etc required during operation shall be deemed included in cost of item No 86.00 to 90.00. (d) Treated sludge shall be removed outside MD land without any extra cost to Govt. No credit shall be taken from the contractor for treated sludge. Rate of item No 86.00 to 90.00 shall be deemed quoted accordingly.

Chauhan Associates

United Sales Corporation

M/s R. K. Bhambri

VADERAS INTERIORS AND EXTERIORS