Remaining work in builtup areas (such as dinarpura ,Subhash, Sethpura and Basedi etc) of Sarai Basedi Motor Road (SH-66 Km-1 to Km-21) Under CRF

Amount

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.)

By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) for grading- I Material

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications PCC Grade M20

Providing and Laying of Interlocking Concrete Block Pavements of M-40 Grade having thickness 80 mm as per drawings and Technical Specification Clause 1504.(for 120 mm)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing

900 mm equilateral triangle From( Km 1-21)

600 mm Circulabbbbr( Km 1-21)

600 mm x 450 mm rectangular( Km 1-21)

Road Delineators / Vertical Guide Posts: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic nonmetallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandalproof. Including all test report and warranties as per IRC 67 and IRC 79.

M/s IMRAN KHAN NOOR AHMED (BID ID -3178392)

GLOBAL ASSOCIATES (BID ID -3178768)

M H CONTRACTOR (BID ID -3178996)

Pradeep Gupta Contractor (BID ID -3178778)

M/s Deepak Contractor (BID ID -3177651)

M/s Shamim and Sons (BID ID -3178871)

M/S GIRISH KUMAR BHARDWAJ (BID ID -3179067)

Parmod Kumar (BID ID -3177565)

M/S Sanjeev Arya Contractor (BID ID -3179031)

M/S M.A. CONSTRUCTION (BID ID -3178397)

M/s Bhoop Singh (BID ID -3178409)

M/S Garg Construction (BID ID -3178999)