Repair and renovation works of 01 No. 2BHK flat of the SIDBI property at Ludhiana

S.NO DESCRIPTION DSR AMOUNT NS AMOUNT

1 CIVIL & ALLIED WORKS 6,71,012.71 5,26,543.98

2 PLUMBING FIXTURES WORKS 2,87,252.00

3 ELECTRICAL & ALLIED WORKS 3,10,115.00 -

4 ELECTRCAL FIXTURE WORKS 81,886.00

6 Total DSR Amount (5+1) 10,00,757.99

Reduce GST MF @ 0.973 as per CPWD circular

dated 08.08.2024

8 Total Rs including 18 % GST 9,73,737.53 8,95,681.98

9 GRAND TOTAL Rs with GST FOR 1 FLAT 18,69,419.00

9 GRAND TOTAL Rs with GST FOR 1 FLAT 18,69,419.00

Digitally signed by AMIT

CIVIL & ALLIED WORKS

S.No. DSR-2023 No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

1 6.13 designation 7.5 in superstructure above plinth level up to floor V level.

1.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 6.00 Sqm 1123.80 6,742.80

Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining -

(veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3

(1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white

3 8.1 cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be

secured to the backing by means of cramps, which shall be paid for separately)

3.1 8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. -

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and -

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size,approved shade, colour and texture laid over 20 mm

4 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

4.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red -

Extra for providing opening of required size & shape for wash basin/kitchen sink in

kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,

including necessary holes for pillar taps etc. including moulding, rubbing and polishing

of cut edges etc. complete

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average

7 9.27 width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows

and clerestory windows with hinges and necessary screws : -

7.1 9.27.2 30 mm thick shutters -

with ISI marked M.S. pressed butt hinges bright finished of required size - Second class

providing and fixing factory made wadroab made of 18 mm HDHMR board finishing with

1 mm laminate as per approved shade and design

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless steel dash

11.2 10.28 fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of 50.00 Kg 772.40 38,620.00

waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

Digitally signed by AMIT

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be

specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make

12 11.37 in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement 11.67 Sqm 1096.55 12,793.08

mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm

including pointing the joints with white cement and matching pigment etc.,., complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622

(thickness to be specified by the manufacturer ) of approved make in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in

skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement:

3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing

in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments etc. The tiles

must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with

the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber

mallet for placing the tiles gently and easily.

14.1 11.41A.1 Double charge vitrified tile polished finish of size -

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an -

22.1 13.60.1 Two or more coats on new work. 820.00 Sqm 137.85 1,13,037.00

Polishing in high gloss/matt finish melamine clear polish on wood work in required

30 13.116 color/wooden shade texture with following process in the sequence as detailed below: -

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand

paper of 160/180 nos. -

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st

coat and 2nd coat is allowed to dry for 8 to 12 hrs. -

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with water to

remove excess sealer layer and make the surface further smooth after this wet rubbing,

then surface is applied with special grade melamine fillers to fill all the small and big -

holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light

wet rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear

polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24

hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry

for 12 hrs. The final melamine polish is applied with compressor pressure spray gun 18.00 Sqm 1156.55 20,817.90

using melamine clear polish and melamine thinner mixed in required proportion

complete as per direction of Engineer-in-Charge. (Finalo coat to be done in 1 or 2 layers

without gap of time.)

Digitally signed by AMIT

Providing and fixing double scaffolding system (cup lock type) on the exterior side of -

building/structure, upto 25 metre height, above ground level, including additional rows of

scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S.

tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock

system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the

scaffolding for working platform etc. and maintaining it in a serviceable condition for

execution of work of cleaning and/ or pointing and/ or applying chemical and removing it

The scaffolding system shall be stiffened with bracings, runners, connecting with the -

building etc, wherever required, if feasible, for inspection of work at required locations

with essential safety features for the workmen etc., complete as per directions and

approval of Engineer-in-charge.

Note :- (1) The elevational area of the scaffolding shall be measured for payment -

(2) The payment will be made once only for execution of all items for such works. 45.00 Sqm 285.00 12,825.00

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all

complete as per directions of Engineer-in- Charge.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of

the Engineer-in-Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50

37 14.84 metres lead) as per direction of Engineerin-Charge. -

(a) Internal Work- Exposed on wall 65.00 m 2.85 185.25

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of

38 14.85 repaired door shutters to existing door frames, including replacement of hinges with 12.50 No. 325.95 4,074.00

screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of -

39 15.2 material within 50 metres lead as per direction of Engineer - in - charge.

39.1 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 4.50 Cum 2007.10 9,031.95

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel

40 15.3 bars and disposal of unserviceable material within 50 metres lead as per direction of 1.70 Cum 2928.10 4,977.77

Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B.

41 15.5 work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per 1.70 Sqm 947.10 1,610.07

direction of Engineer in-charge.

Demolishing brick work manually/ by mechanical means including stacking of -

42 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per

direction of Engineer-in-charge..

Dismantling doors, windows and clerestory windows (steel or wood) shutter including -

43 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

43.1 15.12.2 Of area beyond 3 sq. metres 12.50 No. 414.55 5,181.88

Dismantling steel work in single sections including dismembering and stacking within 50 -

44 15.17 metres lead in:

44.2 15.17.2 Channels, angles, tees and flats 85.00 Kg 1.90 161.50

Digitally signed by AMIT

Dismantling tile work in floors and roofs laid in cement mortar including stacking material -

45 15.23 within 50 metres lead.

45.1 15.23.1 For thickness of tiles 10 mm to 25 mm 85.00 Sqm 60.50 5,142.50

45.2 15.23.2 For thickness of tiles above 25 mm and up to 40 mm 110.00 Sqm 93.40 10,274.00

Dismantling G.I. pipes (external work) including excavation and refilling trenches after -

46 15.44 taking out the pipes, manually/ by mechanical means including stacking of pipes within

50 metres lead as per direction of Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after taking out the -

pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and

47 15.45 making into blocks including stacking of pipes & lead at site within 50 metre lead as per

direction of Engineer-in-charge:

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking

48 15.52 of useful materials near the site and disposal of unserviceable materials within 50 2.50 No. 744.60 1,861.50

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to approved

49 15.60 municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial 25.00 Cum 219.35 5,483.75

lead, for all leads including all lifts involved.

Providing and applying pop punning on wall 5 mm thick in proper line and level with

57 NS required material ,t&p , labour etc. all complete 250.00 Sqm 190.00 47,500.00

Supplying and fixing SS Curtain rod on door and windows with required SS

58 NS bracket. Rate also include s/f end funnels /cap of approve design as per site 10.00 RMT 826.00 8,260.00

upply & fixing of 18 mm HDMR ply of size 1500 mm X 1200 mm having set top box

holder size 1200 mm X 200 mm placed 100 mm from TV unit. All side with with 2mm

59 NS laminate of approved colour & provision of 6/16 Amp socket at top , Tv cable with switch 1.80 Sqm 4550.00 8,190.00

plate. Two number of 6/16 Amp socket with one control switch above set top box point

as per site condition

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., -

by applying cement slurry mixed with water proofing cement compound consisting of

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement -

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement -

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed

with water curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.) 14.00 Sqm 516.60 7,232.40

71 NS MODULAR KITCHEN WORK -

Digitally signed by AMIT

Providing and fixing modular kitchen units for the kitchen platform and top wall

units to be fabricated by using HDHMR board of thickness 18 mm for making

cabinets of required sizes to match with the sizes SS kitchen jali units and size of the -

SS sink as per following details :-

Front bottom , top sides and shelf partitions of the modular cabinets shall be of -

18 mm thick HDHMR boards of Mls Green panel Industries or approved

equivalent and back portion shall be of 8 mm thick HDHMR board or approved

equivalent with necessary fittings , screws , pasting materials, finishing all exposed cut

surfaces with self adhesive PVC tape in matching shade as that of laminate . The

shutters and the pull out units shall be fixed 50 mm above the kitchen floor level . All

the inner portions of the cabinets shall be finished with 0.8 mm thick laminate of

white colour and approve make..The front face of the cabinet shall be finished

with1.0 mm ultra gloss laminate shade 21162 MR+ & 21069 MR+ Merino make The

fittings like handles , telescopic channels SS baskets , auto closing hinges

shall be paid separately under respective items below . Quoted rates shall be

inclusive of labour , materials wastage scaffolding fixing arrangements of top

and bottom units with necessary dash fasteners , repairing the damages, shifting

the debris out of colony , CP , taxes etc all as required for the execution of the work .

Note :- Only front elevation area shall be measured for payment purpose.

a. Below platform units of depth 610 mm approx , 5.00 Sqm 16902.00 84,510.00

b Top wall units of depth 300 mm approx. with shelves 3.00 Sqm 12000.00 36,000.00

Providing and fixing stainless steel baskets and other -

2 fittings , accesories of modular kitchen of Mls Hettich or approved equivalent make as

per below mentioned details :-

a SS 304 cutlery baskets 15 x20 x4 inch 1.00 Each 2950.00 2,950.00

c SS 304 thali basket 15 x20 x8 inch 1.00 Each 3300.00 3,300.00

d SS 304 plain baskets 19 x20 x4 inch 2.00 Each 2500.00 5,000.00

f SS 304 plain basket 19x 20 x8 inch 2.00 Each 3000.00 6,000.00

g SS baskets S —Corner basket 1.00 Each 4000.00 4,000.00

h SS detergent pullout 1.00 Each 1800.00 1,800.00

i SSdustbin ring 1.00 Each 1770.00 1,770.00

j Bottle Pull out basket set of width 9" with standard depth 1.00 pair 2400.00 2,400.00

n S/F Chimney 600 mm Faber make with vent pipe Basic model 1.00 Each 14500.00 14,500.00

O kitchen sink 1050 mm 1.00 Each 7500.00 7,500.00

Supply & fixing of HDPE Twine Bird Nert/Pigeon net for balcony Twine size 280D/15 ply

, UV sablized Sample of the same will be approved by Engineer In charge

77 NS Sliding Window ( 3 track 2 Glass Shutter & 1 Mesh Shutter) - -

Digitally signed by AMIT

Supply & fixing of uPVC sliding windows: Frame made from the extruded uPVC window

profile section of size 112 W X 50 H mm having outer wall thickness of 2.0 mm(+/-) and

3 box multi chamber construction, white in finish, duly reinforced with 1.2 mm thick GI

Section. Frame shall have three track configuration, two for sliding shutter and one for

mosquito mesh shutter. Verticle memeber of frame which bears the sliding shutter load

shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners

shall be mittered cut & thermal welded so as to form window frame. Frame shall be

milled with drain and air equalizer hole in order to be water tight and for drainage of

accumulated water ,if any, to outer side.

Shutter: The Shutter of sliding window shall be made of 42w x 69h mm Extruded 3 box

multi chamber uPVC Window Profile Section of white colour having outer wall thickness

of 2.0mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly

metered cut & thermal welded at all coners and fitted with uPVC glazing bead of size25

x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith

6mm thick ISI make plain float glass. Mesh shutter shall be made of 39w x 69h mm

Extruded 3 box multi-chamber UPVC Window profile section of white colour having

outer wall thickness of 2.0mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick

GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymer

mesh and rollers/pully. (Prizma, Fenesha & Aluplast)

Sample of the same will be approved by Engineer In charge

Digitally signed by AMIT

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate MR Amount

Supplying and fixing looking mirror

of 5 mm thick looking glass with

bevelled edges and holes as per site

requirement of Modi Gaurd or other

approved equivalent Rates are

inclusive of fixing of glass with SS stud

all complete as directed by Engineer

Providing and fixing in position

Jaguar (Item Code no. ACN:1111

NM) or other approved equivalent

quality Towel rod of 24" length with

brackets fixed over tiles with rowel

plug and approved quality screws

including cutting and making good the

Providing and fixing in position

Jaguar (Item Code no. ACN:1121)

or other approved equivalent quality

Towel ring fixed over tiles with rowel

plug and approved quality screws

including cutting and making

damages of tiles etc. all complete as

required at site as directed by the

Engineer-in-Charge.

Providing and fixing in position

Chlorinated Poly Vinyl Chloride

(CPVC) pipe SD-11 of approved

make in desired thickness having

thermal stability for hot and cold water

supply of including all CPVC plain &

brass threaded approved fittings

and fixing the pipe with clamps &

screws as per the site requirements

at 1.00 meter C/C etc. all complete.

(a) 20mm nominal dia Rmt 50.00 472.00 23,600.00

(b) 40 mm Nominal dia Rmt 12.00 590.00 7,080.00

c) 65 mm dia pvc pipe with fitting

d)15. mm dia brass ball valve in kitchen

Supplying and fixing position the

following approved make fittings &

fixtures, including carefully removing

the existing old/damaged fittings &

fixtures and handing over the same

Washbasin divertor with face plate sigel

(i) flange of continental series of Each 2.00 4,050.00 8,100.00

Hinddware or other approved

equivalent make.

15 mm dia. C.P. Brass bib cock with

nozzle wall CP. flange of approved

equivalent make.

15 mm dia. C.P angle valve with

wall CP. flange of continental series of

Jaquar or other

approved equivalent make. VGP-CHR-

15 mm dia. C.P. Brass central hole

single lever wash basin mixer of

Jaquar Model VGP- CHR—81005N B

or other approved equivalent make

(iv) including plumbing fittings and 450 Each 2.00 4,720.00 9,440.00

mm long braided hoses etc. all

complete as required at site.

15 mm dia. C.P. 4 way high flow

single lever divertor with cover plate

,c.p pin . Including all plumbing

fittings& fixtures etc all complete as

(v) required at site as directed by Each 2.00 5,625.00 11,250.00

ENGINEER IN CHARGE . Model ALD-

CHR -079N & VGP— CHR-81083 K

15 mm dia C.P spout of approve

design with C.P Handshower and

c.p flexible tube of required length

(vi) Jaquar make Model SPJ-CHR- No. 2.00 4,562.00 9,124.00

81463 ,HSH-CHR-35537

C.P Overhead shower 150 X150 mm

with 450 mm long C.P Shower Arm

Jaquar Model OHS- CHR-1605

100mm dia. Heavy quality stainless

steel Jali (grating) with or without holes

for waste pipe of floor / Nahani trap etc

(viii) all complete as required at site as Each 8.00 450.00 3,600.00

directed by Engineer In charge

Heavy quality CP Soap dish of

Jaquar (codeno:ACN: 1131N) or

approved equivalent make.

15 mm dia .C.P brass two way bib cock

model no. FUS-CHR-29041 with hand

shower (health faucet) model no. ALD-

CH R-585 with flange of Jaquar or

approved equivalent make etc all

complete as required at site as directed

by the Engineer-in-Charge.

15 mm dia. C.P brass conceled stop

cock with upper body plate Jaquar

make Model VGP—CHR-81083K

Providing and fixing glass shelf of

Jaguar make [Code No. CAN -1171N]

including bracket etc. all complete as

directed by ENGINEER IN CHARGE.

Providing and fixing table mounted

(xiii) sink mixture model no.FLR-CHR- Each 2.00 6,434.00 12,868.00

S/F 450 mm long pvc connection

Providing & fixing in position

Hindware, Parry ware or other

approved make 1st quality vitreous

china glazed wall mounted European

WC of standard size with either P trap

as per site requirement and

providing & fixing conceled cistern

with required material ,labour etc i/c

cover plate all complete Model Enigma

Providing and fixing in position 100

mm dia. and 75mm outlet pvc Nahani/

floor trap having seal of 40 mm to

50mm, approved equivalent ISI mark

having necessary length of extension

pipe wherever required including

cutting of concrete and repairing

with concrete after completion

Supplying and fixing table top

square washbasin 40x40 cm of Jaquar

approve model with c.p waste coupling

and heavy duty waste pipe all

complete as required at site as

directed by Engineer-in-Charge.Model

Fabricating ,supplying and fixing

Vanity of required size approx 30 x

20 inch made up of 18 mm HDHMR

board ,.8 mm laminate on all internal

faces and 1.0mm on shutter with auto

closing hinges and fixing of same with

fastner etc. Rate are inclusive of

Providing and fixing 6kg pressure PVC

pipe for toilet internal and external

B/11 fitings complete with fixing acessories

as per required

Total Rs. 2,87,252.00

ELECTRICAL & ALLIED WORKS

S.No. 22EM Description of Item Quantity Unit Rate (Rs) Amount(

Wiring for light point/ fan point/ exhaust fan

point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core

cable in surface / recessed medium class

1 1.10 PVC conduit, with modular switch, modular

plate, suitable Gl box and earthing the point

with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Wiring for twin control light point with 1.5

sq.mm FRLS PVC insulated copper

conductor single core cable in surface /

recessed medium class PVC conduit, 2 way

2 1.11 modular switch, modular plate, suitable Gl 6.00 Point 1562.00 9,372.00

box and earthing the point with 1.5 sq.mm

FRLS PVC insulated copper conductor

single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm

FRLS PVC insulated copper conductor

single core cable in surface/ recessed

3 1.12 medium class PVC conduit along with 1 No. 125.00 Metre 334.00 41,750.00

4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing

Wiring for circuit/ submain wiring along with

earth wire with the following sizes of FRLS

4 1.14 PVC insulated copper conductor, single core -

cable in surface/ recessed medium class

PVC conduit as required.

Digitally signed by AMIT

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 100.00 Metre 334.00 33,400.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 40.00 Metre 439.00 17,560.00

1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 20.00 Metre 570.00 11,400.00

Rewiring for light point/ fan point/ exhaust

fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor

single core cable and 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable

as earth wire in existing surface/ recessed

steel/PVC conduit including dismantling as

Rewiring for twin control light point with 1.5

sq.mm FRLS PVC insulated copper

conductor single core cable and 1.5 sq.mm

6 1.16 FRLS PVC insulated copper conductor 2.00 Point 894.00 1,788.00

single core cable as earth wire in existing

surface/ recessed steel/PVC conduit

including dismantling as required.

Supplying and drawing following sizes of

FRLS PVC insulated copper conductor,

single core cable in the existing surface/

recessed steel/ PVC conduit as required.

Supplying and drawing following pair 0.5

mm dia FRLS PVC insulated annealed

copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/

PVC conduit as required.

Digitally signed by AMIT

Supplying and drawing co-axial TV cable RG-

6 grade, 0.7 mm solid copper conductor PE

insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the

existing surface/ recessed steel/ PVC

conduit as required.

Supplying and fixing of following sizes of

steel conduit along with accessories in

surface/recess including painting in case of

surface conduit, or cutting the wall and

making good the same in case of recessed

conduit as required.

Supplying and fixing of following sizes of

medium class PVC conduit along with

11 1.21 accessories in surface/recess including -

cutting the wall and making good the same

in case of recessed conduit as required.

Supplying and fixing suitable size Gl box

with modular plate and cover in front on

surface or in recess, including providing and

fixing 3 pin 5/6 A modular socket outlet and

5/6 A modular switch, connections etc. as

Supplying and fixing suitable size Gl box

with modular plate and cover in front on

surface or in recess, including providing and

fixing 6 pin 5/6 & 15/16 A modular socket

outlet and 15/16 A modular switch,

connections etc. as required.

Digitally signed by AMIT

Supplying and fixing call bell/ buzzer suitable

14 1.38 for single phase, V, complete as required. 15.00 No. 99.00 1,485.00

Supplying and drawing of UTP 4 pair CAT 6

15 1.51 LAN Cable in the existing surface/ recessed -

Steel/ PVC conduit as required.

Wiring for group controlled (looped) light

point/fan point/exhaust fan point/ call bell

point (without independent switch etc.) with

1.5 sq. mm FRLS PVC insulated copper

16 1.55 conductor single core cable in surface/ -

recessed PVC conduit, and earthing the

point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as

Digitally signed by AMIT

ELECTRICAL FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Carefully disconnection and removing all fans, fittings, decorative lights, water purifier, geysers, wires,

1 conduits, casing capping , switch boards/ DB etc. in flat and keeping reusable items like exhaust fans JOB 1.00 8,500.00 8,500.00

ceiling/wall fans, LED batten water purifier, geyser etc.

2 Supplying ,Fixing, testing and commissioning of following Electrical items with necessary hardware -

SITC of LED tube light fixture of 4’ length 36 Watt white colour LED tube light on new white colour

square PVC block and using two/three core copper conductor PVC insulated preferably white

colourcable from tube light fixture to ceiling rose as directed by Engineer In Charge.

SITC of 48 inch BLDC Ceiling fan of approve shade with all

necessary mounting accessories with step regulator To provide 3 mm thick Bakelite round plate with

required hardware near the ceiling fan hook.

PVC exhaust fan of 200MM size with pvc louver protection complete with required fittings

and hardware etc. and using two/three core copper conductor PVC insulated preferably white

colourcable from exhaust fan to ceiling rose as directed by Engineer In Charge.

D SITC of 25 litre horizontal/vertical geyser i/c all necessary hardware material etc .all complete. No 3.00 10000 30,000.00

3 15 watt LED PANEL -

SITC of 15 watt LED panel light at entrance, balconies and kitchen

A both surface and conceled type i/c connection and testing complete. No 18.00 700.00 12,600.00

SITC OF 18/20 Watt LED light on ceiling with required

B hardware material all complete (Dinning room) No 2.00 550.00 1,100.00

SITC of cabin fan 12 inch size on ceiling bwith required material

.Crompton ,Havells make

5 LED tube light -

10 Watt 2 ft led fitting, White Colour No 2.00 250.00 500.00

Total Rs 81,886.00

Digitally signed by AMIT