SPECIAL REPAIRS TO BLDG NO P 377 AND SPL REPAIR REPLACEMENT OF OLD VINTAGE GI PIPE LINE AND ALLIED ITEMS AT MIL STN DHRANGADHRA

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in hard and dense soil and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L for Cement Concrete type B-2, 1:2:4 using 40 mm graded crushed stone graded agg as in fdn filling and mass concrete (water storage tank platefom) complete all as completed as directed.

M&L, providing cement concrete1:2:4 type B1 using 20mm grades aggregate as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed.

M&L for 1:2:4, type B0 (using 20mm graded stone aggregate) as in Chajjas complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings in block walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10cm but n.exc. 20cm girth complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and steel window/ ventilator n. exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed

S&F 75mm aluminium anodised barrel tower bolts of extruded section all as specified.

S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed.

S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed .

S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F, continious (Piano) hinges, mild steel bright finish or electro galvanized, wiidth of flap 40mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 75 mm complete all as specified and directed.

S&F, 125 mm aluminium anodised hasp and staple complete all as specified and directed.

S&F, in repair, 20mm dia Harrison rails, mild steel chromium plated with fixing brackets, stops, rolleres etc. complete all as specified and as directed.

S&F in repairs, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, complete all as specified and directed.

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

S&F, Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

M&L for TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders of Grade-500d incl cutting, bending, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed0 not less than 0.9mm dia or securing with clips complete all as specified and directed.

Fixing only rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/walls in PCC 1:2:4 type B-0 to match the existing floors/walls.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium window shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as directed by Engr-in-charge.

S&F, in repair, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F, APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed

M&L for 18-19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cupboard, rebated or flat edged complete all as specified and directed.

M&L for 6mm thick external teak wood lipping fixed to 18/19mm thick block or Veneered particle boards with nails complete all as specied and directed.

M&L for 50mm thick cement concrete 1:3:6 type C2, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

S&F, coloured glazed ceramic tiles of size 450X 300X 7mm thick in vertifal surface such as skirting/dado,incl highlighter patterns complete set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendring in CM 1:3 complete all as specified and as directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.

Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed.

M&L for Chequered cement, concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors of any description with white cement & pigment over 20 mm thick in CM 1:6 complete alla s specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on ceiling, soffits, chajja projection etc complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:4) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on stone masonry surface or surface other than fair face of brickwork surface finished fair and even without using extra cement complete all as specified and directed.

M&L for 15mm rendering thick in two layers consisting of 5mm in CM 1:4 over 10mm thick in CM (1:6) plastering on stone masonry surface and rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

M&L for preparing of new plastered or un-plastered surfaces and applylng two coats of oil bound distemper over a coat of primer over and including wall care pulty complete all as specified and directed

M&L for complete removal of existing treatment with Mechanical Scrubber on old plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over two coats of Birla/JK white putty on walls complete all as specified and directed.

M&L preperation of new surfaces of walls and applying two coats of cement base paint over one coat of Alkali resistent priming paint etc completed all as directed and specified.

M&L for complete removal of existing treatment with Mechanical Scrubber on old plastered surfaces of walls and applying two coats of cement base paint over one coat of Alkali resistent priming paint etc completed all as directed and specified.

Preparation of New plastered surfaces of ceiling and applying Three coat of white wash on ceiling including cornices etc complete all as specified and directed.

M&L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified..

S&F, 5.50 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and Fixing in repair ot 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 Sqm each pane from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all,as specified and directed.

M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L for drilling and tapping water main (in position) for branch connection of 25/20mm bore including necessary fittings complete all as specified and directed.

S&F, GI tubing, 20mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

S&F, GI tubing, 25mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

S&F, GI tubing, 40mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

S&F, GI tubing, 50mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

S&F, GI tubing, 80mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 40 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 50 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 80 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F in 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 15 mm bore steel tubing and connections complete complete all as specified and directed

S&F in 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 20 mm bore steel tubing and connections complete complete all as specified and directed

S&F, 40mm, low density polyethylene pipe (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilling or in floors etc. complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified and directed

S&F, in repair, 15mm bib taps, Brass chromium plated, with crutch or butterfly, handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F, in repair, pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed.

S&F in repairs Stop valves/ Angle valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F, in repair, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed.

S&F, in repair, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 40 mm bore of pipe complete all as specified and directed.

S&F, in repair, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 50 mm bore of pipe complete all as specified and directed.

S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F, Gratting square 150mm size of PTMT (Minum weight 100 gms) complete all as specified and directed.

S&F, Gratting square 150mm size of PTMT with waste hole (Minum weight 100 gms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. complete all as shown on drawing NO TD/2004/26 Sh 1/1 to 1/3 and as specified and directed for 600mm x 600mm x 600mm of size.

M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. complete all as shown on drawing NO TD/2004/26 Sh 1/1 to 1/3 and as specified and directed for 900mm x 900mm x 900mm of size.

M&L for cutting of Road/PCC path, hard standing etc of depth not less than 60 cm and width not less than 45 cm for laying water supply pipe and making good the existing surface with PCC (1:2:4) type B-2 of 150mm thick complete all as specified and directed.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed.

S&F PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.

S&F PVC (SWR) bends of any radius with oval and access door of 110mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.

S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete fixed all as specified.

S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. including seat cover etc. complete all as specified and directed.

S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

S & F in repairs white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut and washers etc complete.

S&F 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

Supply only bituminous primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise proviceded for complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheet in roof covering

Dismantling, 75mm dia cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortar and taking out of trenches if required complete all as specified and directed.

Dismantling, 110mm dia cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortar and taking out of trenches if required complete all as specified and directed.

S&F, sluice valve, in replacement, 80mm dia, class PN-1.6 with stainless steel spindle and check nut confirming to IS :14846 - 2000, double flanged, with and including new flanged rubber joints using necessary nuts, bolts, washer and rubber gasket etc. testing on completion complete all as specified & directed .

Taking down carefully copper/aluminium point wiring (Light, fan, socket or power etc.) complete including fitting such as switches, socket, bell pushes, ceiling roses, pendants/batten holder, call bell, regulators etc all as specified and directed by Engr-in-charge.

M&L for point wiring in and including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm (for phase, neutral & earth) single core including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continity insulated PVC unsheathed (green colour) 1.5 Sqmm copper earth wire connected to common earth dolly complete all as specified and directed by Engr-in-charge for the followings:-

(a) One light/fan/bell point controlled by one switch one way.

(b) One 3 pin, 5 Amp socket outlet on independent board.

(c) One 3 pin, 5 Amp socket outlet on the same board controlled by another switch.

(d) One light point controlled by two switches of two way.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 2.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 2.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for for 6/16 Amp independent socket.

S&F modular bell push 6 Amps, 1 module complete all as specified and directed.

S&F modular switch one way 16 Amps flush type 230 volts complete all as specified.

S&F, in repair, modular switch, 2 way, 6 Amps complete all as specified and directed.

S&F, in repairs, bell, A.C. 230 Volts, single pole, Ding doll, complete all as specified and directed.

S&F modular socket outlet 3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F, modular switch piano, flush type 6 Amps two way 230 volts complete all as specified and directed.

S&F modular socket 3 pin 6 Amps flush type 230 volts complete all as specified.

S&F, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed.

Labour only for Cutting openings, through brick walls for fixing of exhaust fan, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. and rubbish not exc. 50m. Forming jambs, etc. to openings for 300mm exhaust fan including cutting in wall fo cement mortar 1:6, toothing, and properly bonding into old work, also facing, jointing and pointing to match existing work, complete

Supply and fix of exhaust fan, 300 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450mm long, with 15A plug top etc. complete all as specified and directed.

S&F LED compact fitting for LED tube double side connection of 1x20W, 220V, AC decorative box type 4ft with integral LED driver including 20W, T8 tube rod complete all as directed by Engr-In-charge.

S&F LED compact fitting for single LED tube of 1x10W, 220V, AC decorative box type 2ft complete all as directed by Engr-In-charge.

S&F, in replacement wall mounted fancy bracket designed decorative glass type LED light with holder B22 new generation, aesthetically designed, ultra modern luminaire with warm white 9/10Watts LED bulb complete all as specified and directed.

S&F, in replacement, modular PVC box, 20 A socket and 20 Amps modular MCB SP, 10 KA, 240 volts including 20 Amps top complete all as specified and directed.

Taking down carefully old unsv submain wiring of any type/any size with PVC conduit or casing caping complete all as specified and directed.

M&L for Sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC conduit concealed complete all as directed by Engr-In-charge. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection, wires and making good the disturb surface complete all as directed by Engineer-in-charge.

Taking out KWH electric meter single phase by disconnecting electrical connections from DB and kept in safe custody for reuse complete all as specified and directed.

Supply, installation, commissoning and testing, factory made, CPRI approved, LT Panel Box, wall mounted compartment type made out of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof with front opening hinged door and locking arrangement mounted on MS flat iron clamp welded to panel body duly grouted on wall, 415 volts 3 phase, 4 wire AC 50 HZ having 4 pole aluminium bus bar of 200 Amps including provn of space for installation of existing single phase prepaid meter - 04 Nos, hold fasts, fastener bolts, copper lugs, rubber gasket locking knobs, nuts, bolts, washerc etc suitable single core copper wire connections and epoxy powder spray paint with primer complete all as specified including the following accessories :- (a) TP MCCB, 63 Amps, 415 Volts, 16 KA breaking capacity - 01 No. (b) MCB SPN outgoing 40 Amps 10 KA - 05 Nos (c) Re-fixing of single phase electric energy meters obtained in item No. 140 here-in-before. (d) Copper cable 6 sqmm wire for internnal connection and provide earth links on both sides. Note : Quarter No. to be mentioned in respective meters compartment.

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge.

S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

Disconnecting carefully and taking down the existing ceiling fan of any size, and depositing to MES E/M store for safe custody complete all as directed by Engr-in-Charge

S&F ceiling fans 1200mm sweep energy efficient five star rated 230 volts with blades, down rods, electronic regulator control type and accessories with brushless direct current motor (BLDC) and connecting up with 3 runs of suitable size single core PVC cable from ceiling rose to fan complete all as specified and as directed. Make : Havells/Bajaj/Crompton

S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. Make Havells/Bajaj/Philips/Crompton

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to DBs using GI earth wire 4mm dia as earth lead all as specified and testing on completion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m.

M/S HARI CONSTRUCTION (BID ID -3127842)

Aggarwal Brothers and company (BID ID -3131535)