Cheriyamundam GP (Project No.175/2024-25)-Panchayat Office Renovation

Amount

Building Maintance work

15.41:Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD190933/2024-2025:Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

OD280056/2024-2025:(OD modified DAR 12.4.2) Providing Valley or ridges and hips width 60 cm or nearest overall width Plain Aluminium sheet fixed with polymer coated J or L hooks or bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.

OD280190/2024-2025:Providing and fixing 150mm wide PVC 4kgf/cm2 half square cut section rain water gutter pipe with iron brackets 25X5mm size flat, screws, washers etc.. including making necessary connections with rain water pipe etc.. complete. for rain water collection including all cost and materials, conveyance, labour charges etc. complete.

OD280249/2024-2025:(OD From Modified DAR 50.12.5.1) E board - with Departmental E board classic tile or equivalent - Providing and fixing false ceiling with E board classic tile or equivalent make of nearest size 610x610x4 mm ceiling of approved quality in aluminum frame work with necessary screws etc. complete ( aluminum frame work shall be paid separately).

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

21.6:Providing and fixing 6 mm dia. G I level adjusting hangers ( upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-Charge.

50.9.12.1:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.

OD280849/2024-2025:(OD From Modified DAR 50.9.12.1) Providing and fixing 8mm thick Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.

OD280850/2024-2025:Mica laminate sheet work over multi wood shelves and furniture's with good quality adhesives as per standard specifications and directions from the Engineer-in- charge.

OD285043/2024-2025:( OD From Modified DAR 10.30.1) Providing & fixing glass panes with putty and glazing clips in compartment, steel doors, windows, other similar work etc. all complete with Toughened glass panes 12 mm thick.

OD324562/2024-2025:(OD From DAR 50.17.1.1) Supplying and fixing Telescopic drawer channels including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

OD324563/2024-2025:(OD From DAR 50.17.1.1) Supplying and fixing 100 mm SS Fancy handles for cabinet including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

OD324705/2024-2025:(OD From DAR 50.17.1.1) Supplying and fixing SS Auto Hinges including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

OD324747/2024-2025:(OD From DAR 50.17.1.1) Supplying and fixing SS Clamps for cabinet including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

KRISHNADAS M (BID ID -2068653)

Bidder Name

SURANDRAN R

KRISHNADAS M