Supply Installation Testing and Commissioning of 100 KVA Distribution Sub Station 100 KVA SERVO Transformer and 40 KVA Genset along with 11 KVA Line for CFC at SUMBH Samba for Promotion and Development of Bamboo Craft Establishment of CaneandBamboo

Amount

SITC of 100 KVA Distribution Sub Station along with allied accessories (complete job)

11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, 100 KVA (Aluminium wound and with LV Cable Box having detachable Aluminium Gland plate. (Make:ABB/Crompton Greaves/GE/Schneider/Voltamp/GTB)

Gaples Surge Arrestor, 9 KV, 10 KA, LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70 mm² (2Ckt)Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole,ST-410 SP33)

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for LA set/ G.O set/Horn set.

Galanized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box for 100 kVA DTR with MCCB for incomer & SFU's for Outgoing Circuits

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

3-Ø, 4-Wire Trivector Meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5cum/pole

Painting of Poles Red Oxide

Painting of Poles Aluminium Paint

Sundry items like aluminium lugs, Jumpers, binding Tape.

v) Heavy duty aluminum bus bar for input and output connections. w) Unidirectional roller wheels for easy portability. x) Cooling tubes / radiators for cooling of oil is to be provided y) Lifting lugs for lifting is to be provided. z) Earth terminals is to be provided. aa) Oil level gauge is to be provided. ab) Drain valve is to be provided Make: Electricfield/GTB/Jaimaa/crompton/stamford/AE **(The price is inclusive of items mentioned in Sr. No. 2 & 2.01)

Supply, installation, testing and commissioning of 40KVA,415 Volts,3 phase and neutral , 50 Hz ,1500rpm Diesel Generator Set with canopy including AMF Panel, Bus ducting/ Cables from DG set to essential panel, DG set enclosure room sound insulation/ ventilation/smoke exhaust as required, with earthing terminals, control cabling, fuel tank/piping, DG set exhaust piping/ Chimney as per latest CPCB norms, Civil work including foundation as directed by Er.IC . The Genset should be Air cooled and with an A-1 governing system with an alternator of suitable/ equivalent capacity for 40 Kva DG and capable of taking 10% over load for one hour. (a) Brush less Alternator: Brush less Alternator 40 KVA output at 0.8PF, AC 3 phase,415 Volts 50Hz, self- excited self -regulated, Screen protected. Enclosure Should be IP23 or equivalent, Class of insulation: H class (b) Engine: Diesel engine air cooled and electric start suitable to drive above alternator independently, coupled directly through flexible coupling, multi cylinder four stroke, cold starting ,1500RPM industrial type as per BS-649 or latest IS-1601 or latest/equivalent IS code with mechanical governor suitable to regulate speed of DG set from NO load to full load complete with Double insulated fuel tank of cap as per manufacturer recommendations with support and silencer mufflers etc. For continuous operation and standard accessories, sump pre heaters etc. (C) DG set type of Generator Silent 40 KVA 3 Phase,O/P 415V Engine Make: Caterpillar/Kirloskar/Mahindra/Eicher/Cummins/Parkins/Koel Alternator :-Stamford /Lorey Somer /Kirloskar/mahindra/Caterpillar/crompton/Koel Suitable battery:2 NO. for ignition 120 Ah 12 Volt(Make: Amaron/Exide/Amaraja batteries/ luminous) including batterycharger. Turbo Charger Type Fuel:HSD Exhaust pipe:Complete set Class of installation:H Rotor: Dynamically balanced Starter: Brushless Control unit voltage :- DC 24v

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Above 35 sq. mm and upto 95 sq. mm

Supply, Installation,testing & commissioning of 3.5C X 70sqmm cable, 1.1KV grade, armoured , XLPE insulated Stranded Conductor FRLS type. (Make: havells/rr cabel/polycab/finolex)

Providing and fixing of Main Pannels 14 swg with double aluminium Bus bars and allied accessories of different size chambers conssits individual doors for MCB's and MCCB's, energy meter chambers and other switch gears etc as per IS standards and requirement complete with following details including grouting with foundation complete. MCCB's should be ABB, Schneider/L&T/ Siemens/Anchor/ Havells, MCB's should be Havells/ABB/Anchor/Schneider/L&T, CT's Meter should be AE/Rishab/Morley or equivalent make& should be CPRI approved. Panel Size: 6'x4'x1'-6''

Providing and fixing following rating and breaking capacity and pole MCCB/MCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make: Schneider/Havells/L&T/Anchor/Hager/siemens)

100 A , 16 KA,TPMCCB

63A MCCB, 4P,16Ka or more

Aluminium bus bar 100amp 3 phase(1set= 4 burbar runs)

Changeover switch - front operatable 100Amp

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.( Make: Dowells/3D/Gripwell/Siemens or equivalent) 3½ X 70 sq. mm (38mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(Hot dipped galvanized)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

supply, installation, fixing/erection of 11 KV Tapping Point with the following components.

9 MTR Long Poles (ST-410 SP 33)

GI Vcross-arm with top bracket including clamp

GI Channel/Angle iron including clamp

11 KV GO, AB Switch 3-Phase, 3 Pole, 200 Amp, Vertical Type

50 mm² ACSR Conductor

PG Clamps

11 KV Pin Insulator with Pins

11 KV Disc Insulator with Fittings

Galvanized Nuts & Bolts

Danger Plates with Clamps

Anti Climbing Device with Clamps

Earthing Completed by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI strip

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards 0.5 cum/pole

Galvanized stay Set (Complete)

Supply, installation, fixing/erection of 11 kv line on 9 mtr long PCC poles using ACSR Conductors with the following components.

9 Mtr. Long Pole PCC Poles (WL:300 KG)

11 Mtr. Long PCC Pole (WL:360 KG)

GI Vcross-arm with top bracket including clamp

GI Channel X-arm including clamp & braces

ACSR rabbit (50 sqmm)

11 KV Pin insulator with pin

11 KV Disc insulator with fittings

Galvanized Nuts & Bolts

Danger Plates with Clamps

Anti Climbing Device with Clamps

Earthing Completed by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI strip

Galvanized stay sets complete

PG Clamps

Aluminium jointing Sleeves

Stone Pad

Stage stay sets complete

Cement bottoming 1:2:4 mix as per REC standards (0.5 CUM per pole)

SITC of inverter, Changeover Panel alongwith allied accessories complete as follows

Supply, installation,testing and commissioning of Inverter 850 va with battery 150ah including trolley complete with all accessorries as required.( Make: Microtek/Luminous/Exide)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Above 35 sq. mm and upto 95 sq. mm

Supply, Installation,testing & commissioning of 3.5C X 70 sqmm cable, 1.1KV grade, armoured , XLPE insulated Stranded Conductor FRLS type. (Make: havells/rr cabel/polycab/finolex)

Providing and fixing of Main Pannels 14 swg with double aluminium Bus bars and allied accessories of different size chambers conssits individual doors for MCB's and MCCB's, energy meter chambers and other switch gears etc as per IS standards and requirement complete with following details including grouting with foundation complete. MCCB's should be ABB, Schneider/L&T/ Siemens/ Anchor/ Havells, MCB's should be Havells/ABB/Anchor/ Schneider/L&T, CT's Meter should be AE/Rishab/Morley or equivalent make& should be CPRI approved. Panel Size: 3'x3'x1'-6''

Providing and fixing following rating and breaking capacity and pole MCCB/MCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make: Schneider/ Havells/L&T/ Anchor/ Hager/siemens)

125 A,36KA,TPMCCB

63A MCCB, 4P,25KA & above

Aluminium bus bar 150amp 3 phase(1set= 4 burbar runs)

Changeover switch 4 POLE- front operatable 125 Amp with handle

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required. (Make: Dowells/3D/Gripwell/Siemens or equivalent) 3½ X 70 sq. mm (38mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(Hot dipped galvanized)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

VAISHNO ENTERPRISES

kashmir infotech

SUMIT SHARMA

VARUN PATHAK GOVT CONTRACTOR

M/S AARAV ASSOCIATES