PROVISION OF CERTAIN SANCTION WORK AT (PHASE IX) OF VARIOUS UNIT AT TEZPUR AREA UNDER GE (S) TEZPUR

Amount

Taking down chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from the frame ) including dismantling of bed blocks for hold fasts.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters (without taking off shutters from the frame) including dismantling of PCC bed blocks for hold fasts.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction.

Supply and fix, 35 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed

Supply and fix 35mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately).

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement,supply and fixing at site as per specifications.

S&F powder coated aluminium frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,4mm plain glass and stainless steel wirmesh 0.36mm nominal dia of wire and average width of aperture 1.40mm etc.complete all as specified.

S&F 100mm MS Butt hinges medium weight cold rolled and fixed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws. ISI Marked

S&F extruded aluminium alloy handels fabricated type, anodised, 150 mm long and fixed with screws. ISI Marked

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mm

S&F Aluminium anodised barrel tower bolts of extruded section 100 mm long and fixed with screws. ISI Marked

S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples

S& F 4.0 mm thick sheet glass of tinted/ Filmed Ist quality and glazing in squares n exc 0.5 sq. m in each pane in squares.

S&F in repairs 4 mm thick frosted/ pin headed glass in ventilator shutters including hacking out old broken glass any, size, quality or description from wooden / metal frame works all as specified and directed by Engr-in-Charge

Demolition of reinforced cement conc of any description and in any position

M&L reinforced cement concrete Type B1 (1:2:4) (20mm graded aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings balconies, canopies, etc cooking slab and in shelves and the like all a specified and diredted

Formwork to soffits and sides of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) all as directed.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

Supply and fix PVC board 18 mm thick, exterior grade, fixed with screws complete all as specified and directed

M/L PCC 1:2:4 type B1 using 20mm grade aggregate as in coping, leveling course or similar work as directed.

M&L PCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass concrete all as specified.

M & L for 50 mm PCC 1:3:6 C-1 using ( 20 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base all as specified and directed.

S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.

S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed.

S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed.

M&L 75 mm thick PCC 1:3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sand and bitumen at ratio of 1:3 complete all as specifed and as directed.

Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge.

Material and labour for old size brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar ( 1:6) all as specified and directed.

Ditto as per item No 34 except bricks all as sepcified and directed.

Material and labour for old size brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, celings etc including racking out joints, hacking for key, scrubbing down with water all as directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair all as specified.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

M&L Applying two coats of acrylic distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of acrylic distemper to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L Applying one coat of acrylic distemper to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed.

M&L complete removal of existing treatment and appplying two coats of weather coat(Apex of Asian or equivalent in dulux, Berger) over a thin layer of putty and one primer coats of damp shealth to old plastered walls as per manufacturer instrcution including properly fillings the cracks and apllied by approved applicator complete all as specified and directed

M&L preparation and cleaning of existing painted wall surfaces and appplying one coats of Acrylic exterior paint (Anti fungal) paint including properly fillings the cracks with wall care puty complete all as specified and directed

M&L preparation of newely plaster sufaces and appplying two coats of weather coat (Acrylic water proofing paint) over a coat of putty and one primer coats of damp shealth to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Cuttitting and polishing only to existing kota stone surface incl filling joing with pigment and cement etc with beeswax polishing complete.

M&L Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6.

M&L Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in skirting/ Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1:4

M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) for in skirting/border with 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:3 complete all as specified and directed.

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly all as specified and directed

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps, applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capavity on same place with all required necessary fittings complete all as specified and as directed.

S&F 15mm Bore tube medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down

S&F 20mm Bore tube medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down

Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed

Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F Piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, including 600mm long PVC connection of PTMT nuts at both ends screwed for 15mm iron pipe and fixed.

S&F Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm or for brass ferrule and fixed.

Supply and fix, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

Supply and fix waste coupling CP 32 mm dia for glazed wash basins etc with fly nuts flanged etc complete all as specified and directed.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or highdensity or PVC 32 mm dia complete all as specified and directed.

Supply and fix, as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

Dismantling and breaking up PVC drain pipes of any dia taking out of trenches/ fixed to wall/ laid in floor etc complete all as specified and directed.

Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.

Supply and fix, 75mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.

Supply and fix, PVC (SWR) bends (any radius) for 110 mm bore PVC pipes all as specified and directed.

Supply and fix, PVC (SWR) bends (any radius) for 75 mm bore PVC pipes all as specified and directed.

Supply and fix, PVC cowls 110 mm bore all as specified and directed.

Supply & Fix as in repair CP shower rose with revolving joints and fixed to GI pipe or unoin all as directed.

Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed

S&F 300mm ordinary mild steel rat tail rod pattern springs including roller and roller plate complete.

S&F in repair brass choromium plated towel rail 600 mm long complete all as specified and directed.

S&F in repair brass choromium plated soap dish complete all as specified and directed.

Supply and fix bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including spreader providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified

S&F MS framed works such as grills grating, welded mesh etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-290 Gde -E complete all as specified and directed

Material and labour for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 1.5mm dia double GI adjustable suspendor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress (Make: E Board of approved make)

M&L prepration of new steel surface and applying two coats of synthetic enamel paint over one coats of red oxide preparation of new surfaces over 10 cm width on ginth.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces incl roof sheet of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint over a coat of pink primer incl scrubbing old paint all as specefied and directed.

S&F in repairs stainless steel curtain rod decorative type of 20/25 mm bore incl brackets and end knobs for door and window complete all as specified and directed.

S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour with 250 mm end creeps ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws as specified.

S&F steel work in tubular truss including Post of different size bend to shape, cut to length etc, including necessary welding,special shape washer, roller conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.

M&L for Vitrified parking tiles of any colour/patern 40cm x 40 cm x 8 to 10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes. Make Johnson & equivlent

M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick with white cement and pigment, top surface treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

Fixing only in repairs for 4 mm thick E Board decorative type, fixed to timber/ GI/ Aluminium framework in ceiling flat/ sloping all as specified and directed.

S&F in repair 32/40 mm dia PVC 610 mm long waste pipe suitable for WHB/ Urinals complete all as specified and directed

M&L for stainless steel 1 mm thick Grease Trap for kitchen of size 20X20X30 Cm including all necessary fitting complete all as specified and directed by GE

Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels,benching/haunching of manhole, road side drains includng use & waste of fromwork complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement ,including forms ,moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for fixing PVC 75mm (SWR) floor trap, plain with grating including jointing with solvent cement to 100mm outlet pvc pipe

Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 500 ltrs all as specified in SSR Part I including all its accessories complete all specified and directed.

Taking up GI water tubing 25 mm bore from trenches / floor including all fittings, segregated and stacking the pipe complete all as directed.

Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix Ball valves 25 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supply, installation, testing and commissioning of totally Anticorrosive FRP Bobbin wound sand filter 1200 mm dia with 63 mm dia connected side mount multiport valve with 6 positions, Filter, backwash, rinse, re-circulate, waste and closed, complete all as specified and directed. (i) Maximum working pressure 4 KG/Cm2 (ii) Test Pressure 5.5 KG/CM2 (iii) Maximum temperature 50 degree celcius (iv) Flower rate 40-45 m3/hr

Supply, installation, testing and commissioning of UPVC 6" to 2" dia (6 KG Pressure) pipeline with TEE, Elbow, Valves, Socket, Flanges, Sluice valve, NRV etc to complete jointing of all three filter. Complete all as specified and directed.

S & F in replacement of Alum Dosing system with 2 Kg fitkery alum with including dismantling complete all as specified and directed

S & F in replacement of Chlorine monitoring system and with 40 ltrs Sodium Hypochlorite with including dismantling complete all as specified and directed

M & L for PCC 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate for foundation filling and mass concrete complete all as specified and directed

Material and labour for Demolition of brick or stone/boulder masonary or pipe supporting pillar, kerbs, apron laid in any motor complete all as specified and directed.

S&F Gun metal valve 50mm ISI marked with iron wheel head, screwed both ends for iron pipe with union, including removing old unserviceable gate valves complete all as specified and directed by Engr-in-Charge complete all as specified and directed.

Supply & fixing of suction sweeper (Pool cleaner) complete set with 48" MS fabricated sweeper Headed fitted with nylon brush, 5 HP single phase 220 volt 50 Hz, 2800 RPM motor fitter with suitable capacity centrifugal pump set mounted on MS fabricated trolley, nylon rope, PVC Suction hose 50 mm NRV, Rubber skirt, GI Fittings, starter etc complete all as specified and as directed by Engr-in Charge.

Taking down carefully electric driven centrifugal pump set 5 HP capacity incl MS channels frame from foundation after disconnecting GI pipes/main electric supply from motor starter panel and keeping the MS channel frame at site for repairs/painting and carrying the pump set to nearest repairing workshop incl bring back after repair/replacement complete all as directed by Engr-in-charge.

Dismantling carefully centrifugal pump 5 HP capacity and taking out all serviceable and unserviceable parts and cleaning/removing all dust particles such as mould and moss etc reassembling the same after greasing the ball bearing incl necessary gaskets etc and replacement of unserviceable parts. Note:- Materials required for replacement will be measured and paid separately.

Supply and fixed in replacement Butterfly valve of size 150 mm complete all as specified and as directed.

Supply and fixed in replacement Butterfly valve of size 100 mm complete all as specified and as directed.

Supply and fixed in replacement Sluice valve of size 150 mm complete all as specified and as directed.

Supply and fixed in replacement Sluice valve of size 100 mm complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed.

Taking down main switches and DBs of any type and make including wooden board / junction box.

M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price.

All as per item No. 110 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed.

All as per item No. 110 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed.

All as per item No. 110 here - in - before but for 5 Amps socket point on the same board controlled by one switch.

S&F modular switch flush type, 6 Amp, one way ,1 module all as directed specified.

S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified.

S&F modular switch, 16 Amp flush type 1 module all as directed/ specified.

S&F modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified.

S&F modular Fan Regulator stepped type 2 module ,120W all as directed/ specified.

S&F ceiling rose surface backelite three terminals.

Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten aluminium housing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection.

All as item no 120 above but LED batten 9 watt 2 ft long

Supply and fix for Recess mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, all as specified and as directed.

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed

S & F MCB 'C' series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed

S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed

S&F metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm flush to wall including complete electrical connection by proper size of copper lugs complete all as specified. Note- The cost of cutting wall and making good the disturbed surface by Putty and matching the colour of wall shall deemed to be included in the unit price.

Supply and fixing energy saving ceiling fan 1200 mm sweep (including all fittings and fixture), BEE 5 star rated (BLDC),without remote , minimum air delivery 210 to 230 cmm , working voltage 140 volt to 270 volt , minimum rpm 330 to 350 , ISI marked , including necessary hanging arrangement , providing three core flexible copper conductor wire of size 23/0.0076 from ceiling rose to fan complete all as specified and as directed.

Supply & Fix electric storage heater of 25 Ltr capacity, 5 Star in replacement with heating element 2000 W, thermostat, inlet, outlet connection pipe and air vent connections including all fixing arrangement for mounting on wall and necessary water inlet and outlet connections complete all as specified and directed.

Supply and fixing wall mounting hi-flow and heavy duty fan with all accessories of Size 400 mm sweep, 230 volt Ac with connection from existing celing rose all as specified and as directed

M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4.0 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 3.5 core. Note: 1. Excavation and earth work will be measured and paid seperately.

Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.

M&L for 80 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed. Note : punned thickness will only be measured for payment purpose.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick all as specified and directed by Engr-in-Charge.

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified.

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

Chinmay Traders (BID ID -3440878)