GE/KHU-62/2025-26 SPL REPAIR TO BLDG NO T-01 AND T-03 IN THE AOR OF B/R-I KHUMBATHANG UNDER GE KHUMBATHANG

Amount

Dismantling of wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/ lankets, any thickness, including cover fillets complete all as specified and directed.

M& L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M& L for 11/ 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 13 sqcm not exc25 sqcm , clean sawn, secured with nails or brads complete.

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 3 sqcm not exc 6 sqcm , clean sawn, secured with nails or brads complete.

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area notb exc 3 sqcm , clean sawn, secured with nails or brads complete.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel heet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S& F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/including rain guard cladding to wall,fixed with self tapping screws as specified..

Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints hacking for key scrubbing with water

M & L for Rendering 15mm thick on brick or concrete surface or other than fair faces of brick work on wall in CM 1:4 surface finished even and smooth w/o extra cement

M&L for preparing new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified

M & L for Rendering 15mm thick on brick/stone masonery or other than fair faces of brick work on wall in CM 1:6 surface finished even and smooth w/o extra cement

M&L for preparation of new plaster surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified

M&L for preparing old plastered surfaces of walls and applying one coat of cement based paint complete all as specified

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed.

M&L Virified Ceramic tiles (double charged) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including creed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L glazed tiles coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match including rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm and n.exc 4.00 sqm each complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exc 1.50 Sqm each complete all as specified and directed.

S& F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including hold fast,making good disturbed surface of wall, complete all as specified and directed.

Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

M&L 35mm thick second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats →

Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified .

Supply & fix mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate complete all as specified and directed.

Supply & fix Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm

Supply & fix repair 200 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

Supply & fix 150 mm long aluminium handles, cast type, anodised complete all as specified and directed.

Supply & fix 75 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

Supply & fix 250 mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply & fix 150 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

M&L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works incl 15 mm thick 1:6 screed bed complete all as specified and directed.

Rounding to edges of stones slabs one edge,such as in steps, cooking platform and other similar situations complete all as specified and directed.

M&L 5.0 mm thick plain glass packing with rubber gasket, Al beading etc around both sides for fixing of glass all as specified and directed.

S& F Powder coated d aluminium window and ventilator shutters, side hung type without sash bars,/sliding window as per site requriment aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified →

S& F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) sliding or as per site requrement with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Taking down of unserviceable windows/vantilator with frame (without taking down shutters and grill from frame) of size not exc 1.50 sqm each including cutting holes of appropriate size for insertion blocks of cement concrete hold fasts complete all as specified and directed.

S& F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

M&L 75 mm PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including necessary complete all as specified and directed.

S&F in repair sink double bowl made of stainless steel kitchen or laboratory with plugs, washers and wastes including cupling & waste pipe bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 37x18x9 inches

S&F in repair Vitreous China snow white wash basin, Canton pattern size 615 mm x 510 mm with ful pedestal , 32 mm dia CP waste coupling & 25 mm dia, 75 cm long PVC waste pipe with 32 mm dia connector of make Cera Cat Part No S2040122 & S2090107 or equivalent

S& F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Vitreous China `pedesatl pattern (EWC) white in colour with and including plastic seat cover white closed pattern with flat bottom and cover and MS chromium palted hinging device including connecton to uotgoing pipe complete all as specified and directed by Engr - In - charge (excluding flushing cistern )

M&L in repair CP toilet paper holder complete in all respect as specified.

S&F as in repair 15 mm bore fancy type bib taps two way cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.

Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests including trap but (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

Supply & fixed PVC connection 15mm x 450mm size with PTMT nuts.

Supply & fixed in repairs 15 mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe or for union fixed complete all as specified

Supply & fixed in repairs 25 mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe or for union fixed complete all as specified

Supply & fixed as in replacement of 15mm bore CP stop cock /angle cock fancy type screwed down with iron pipe or for union fixed complete .

Supply & fixed in repairs 15mm bore CP pillar tap swan neck fancy type , screwed down high pressure with or without 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe fancy type

Supply & fixed as in replacement of 15mm bore cast copper alloy CP bib tap fancy type long body screwed down for iron

S&F corner glass shelf large 300mm x 300mm complete all as specified. Make - CERA Cat Part No CA 503 or equivalent of GESIGN.

S &F in repair Tubular towel rail 20mm dia 600mm long of brass chromium plated fixed with brackets and including chromium plated brass screws and wooden/plastic cleats complete all as specified.

Sheet Glass shelf assembly consisting of 5.5 mm thick shhet glass shelf 12 cm wide with chromium plated bracket guard and raling 60 cm long

S & F CP Grating doom 150X150 mm fixed in repairs

S & F C P Grating doom 125 mm dia with waste hole of PTMT (Min Weight 40 gms) fixed in repairs

Demolition of cement concrete block walling built in cement mortor complete all as specified and directed.

M& L pre-cast cement concrete block(1:3:6) type C1 ( using 20 mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in1:6 cement mortar, complete

Taking up or down steel tubing and connection, including cleaning 15 /16 mm bore

Taking up or down steel tubing and connection, including cleaning 20/25 mm bore

S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 16/15 mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 25 mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

Supply & fixed as in Water storage tanks 1000 litres capacity, rotational moulded, triple layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank, complete all as specified.

Supply & fixed in repairs stainless steel curtain rod 25 mm dia with fixing side brackets, end cups, and fixed with PVC rawl plugs & steel screws complete all as specified and directed.

M/L 75mm thick cement concrete type D-2, 1:4:8 for sub base all as directed.

Chequered cement concrete tiles 30cmx30cmx20 mm thick, set,jointed and pointed in neat cement slurry in floors.with grey cement and pigment over and incl 15 mm screed in 1:6complete all as specified and directed.

S& F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etccomplete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed.

S& F PVC (SWR) 75 mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl taking down rcomplete all as specified and directed.

S/fixed in repair PVC (SWR) Bends 75 mm bore,complete all as specified and directed.

S&F in repairs stainless steel plate rack 900x750x200mm of approved quality made of 1 mm thick sheet complete all as specified and directed.

M&L in repair 75 mm dia PVC(SWR) multi floor trap/single with grating including jointing with solvent cement complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc.

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : -

One light point/ one fan point/ Bell Point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

Supply switch piano flush type single pole one way 5 Amps all as specified

Supply switch socket combination multi purpose, 5 amp all as specified

S & F Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked

Supply and fixing One bell/ Buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5sqmm size all as specified

All as per item No 2 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified.

S & F switch socket combination switch socket outlet 3 pin, 16 amp flush type

S&F warm white/ white LED luminaire 600X600 mm,35/36 watt,220V recessed type lumen output >= 122 lumen per watts , THD < 10% environmental friendly , new generation , aesthetically designed , ultra modern with high brightness SMD LEDs as light source incl inbuilt drivers with high efficiency PMMA diffuser soft glare free light complete suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size all as specified and directed.

S&F wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose.

Supply and fix Bed Side Light LED 3 Watt complete all as specified and directed. Make : Philips/ CG/ Havells

Supply and fix decorative fancy Wall Light LED 9 Watt complete With Drivers, holders all as specified and directed. Make : Philips/ CG/ Havells

Supply and fix Bell multi Music type, AC, 230 volts, sinple pole commplete all as specified and directed.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and fixing of exhaust fan , made of sturdy Engineering plastic complete with louvers shuitter AC single phase 230 volt 50 Hz RPM 1200, copper winding of sweep 250 mm complete all as specified.

M&L for Distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, triple pole and neutral 415 volts, flush to wall / fixed on surface complete all as specified and directed incl taking down old one. (Make :- Legrand/Havells/L&T/Schnider)

Supply and fix sheet metal enclosure SPN DB 4 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed.

Supply and fix for miniature Circuit breaker (MCB) single pole and current carrying capacity 5 to 32 Amp 240 volt 'C' curve 10 KA in the MCB DB with connection testing and commissioning complete all as specified and directed.

Supply and fix for miniature Circuit breaker (MCB) single pole & neutral 240 volt 'C' curve 10 KA 32 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed.

Supply and fix for miniature Circuit breaker (MCB) triple pole & neutral 415 volt 'C' curve 10 KA, 63 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed.

S&F two single core 6 sq mm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 6 Sq mm copper conductor. (Note - Two runs of 6 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc in hard/dense soil all as specified.

Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil all as directed.

Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point all as directed.

Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified and directed. Note :- For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR part-I.

Supplying and laying unreinforced precast concrete cable cover, class LV, type 1 flat of size 250mm x150mm x 40mm placed perpendicular of the cable complete.

Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core.

Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I

Deduct Credit for Demolished/Dismantled material Rs (-) 58,431.05 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/s Aman Enterprises (BID ID -3394990)

Feroz Engineering Works (BID ID -3394869)

M/S RW INFRA (BID ID -3394337)

M/S SHABIR HUSSAIN (BID ID -3393976)

HUSNIA BANOO (BID ID -3394079)

KASHMIR FAIR DEAL SERVICES (BID ID -3394524)