WOODEN BOOK SHELF

Length of Modesty Panel 1800 mm Height of Modesty Panel from Table Top 400 mm Thickness of Modesty Panel 18 mm Wooden Uniform Standard Height Top Tolerance PLUS 20 mm 750 mm Thickness of Wooden Leg AND Gable Tolerance PLUS 2 mm 18 mm Thickness of Table Top Edge Tolerance PLUS 5 mm 25 mm Length of Table Top TolerancePLUS50 mm 1200 mm Depth of Table Top Tolerance PLUS 20 mm 600 mm Governing Standard Conformity to IS 303 IS specification seen and understood Yes Whether BIS marked Yes Grade of Plywood depending on bond strength BWR Boiling Water Resistant grade Availability of test report certifying conformity to IS 303 Yes Type of test report NABL NABL Accredited Lab

Decorative Laminated Sheet having Defined Reaction to Fire R Wear resistance is the ability of a material to resist the progressive loss of volume from its surface through mechanical actions such as repeated rubbing, sliding, or scraping 3 Initial Wear Point I P 150 Initial Wear Point IP plus Final Wear Point FP350 resist permanent deformation caused by high force or shock applied to it over an extremely short period of time 2 Spring Force 15 N material in terms of resistance to scratches and abrasion by a harder material forcefully drawn over its surface 3 Spring Force 2 point 00 N Length of the Decorative Laminate Sheet in mm 1800 mm Width of the Decorative Laminate Sheet in mm 900 mm Thickness of the Decorative Laminate Sheet in mm 0.8 mm Surface Finish Matt

Generic Description of store LED PL L Lamp LED PL L Lamp Rating in Watts 18 Lamp Efficacy Lumen Watt Minimum 100 LED chip Efficacy Lumen Watt Minimum 120 Overall Length of LED PL L Lamp in mm 220 Tolerance for the lamp length plus and minus10 mm Colour Temperature in K 6500 K Tolerance for colour temperature plus and minus 350 K Construction Light Source SMD LED Chip Cap designation 2G11 Number of Pins on the lamp cap 4 Life of LED PLL Lamp in hours Minimum 50000 Material of lamp diffuser Polycarbonate Ingress Protection Minimum IP 20 Colour Rendering Index CR lower I80 Operating Voltage in volt 140 to 270 volts AC Beam Angle in Degree 120 Power Factor 0 point 9 Provision of control gear Yes External Type Control Gear Efficiency percent plus minus 85 Operating Voltage range for control gear in Volts 140 to 300 AC Total Harmonics distortion for control gear pecentage Maximum 15 Operating temperature range for control gear minus 10 deg C to plus 50 deg C Protection for control gear Yes for over current protection open circuit protection short circuit protection Surge Protection in kV for control gear2point5 kV internal Warranty for free replacement in years 2 Additional requirement NA Certification Safety of lamp control gear and BIS CRS compliance

Generic Temperature, degree C 65 to 260 Voltage 600 Volt Insulation Spirally wrapped and fused PTFE Insulation Conductor Silver plated Copper Colour Black Construction Diameter over Insulation 1 point 11 millimeter Diameter of Strands 0 point13 millimeter Conductor Size AWG 24 Max Resist of conductor at 20 degree C ohms Km 80 point 2 Crss Sectional Area mm2 0 point 252 No of Strands 19 Diameter of Conductor 0 point 65 millimeter Current Rating Amp 4 Additional Features Approvals LCSO Characteristics Better mechanical and electrical properties Resistance to solder iron damage Resistance to most of the Chemicals Resistance to fire sunlight moisture Corona resistance Higher Reliability Highly Resistative to UV Rays Non contamination non toxic and bio compatible Test Report Certification Availability Of Test Report From Central Govt Nabl Ilac Accredited Lab To Prove Conformity To Specification Yes Is ISO certified Yes Test Report Number and Date FWCPL 241936 600 24 Copies of reports and certifications to be furnished to buyer on demand at time of supplies Yes Name and address of the Lab where Test conducted FLUTEF TEST LAB MSDS Certificate Supplied with material Yes RoHS Compliance Yes

Fevicol 20 Kg