Supplying and Installation of Laboratory Work stations and chairs of the NABL accredited laboratory of ETD buildlng (Ground Floor and First Floor) in NIIST Campus, Trivandrum.

Amount

DISMANTLING AND DEMOLISHING

Work stations - 6000 mm (L) x 600 mm (W) x 750 mm (H) with back panel height and either sides height of 1200 mm - The Work Station / Table made out of high quality 16 mm thick 710 grade BWP (Boiled Water proof ply) plywood laminated with 0.6 mm thick melamine on both sides.The lamination is done with hot press with minimum of 90 tonnes pressure along with Knee space with leg support.Electrical sockets - 2 sockets (5/16 Amps) of 6 sets (total 12 nos) of ANCCHOR/HAVELLS /LEGRAND integrated with switch and power indication provided on each work station.Provision of 10 numbers of LAN port (without wiring). The cabin/table should be ergonomically positioned and all works as per approved design, colour and direction of Engineer-in-charge.

Work stations - 2000 mm (L) x 600 mm (W) x 750 mm (H) with back panel height and either sides height of 1200 mm - The Work Station / Table made out of high quality 16 mm thick 710 grade BWP (Boiled Water proof ply) plywood laminated with 0.6 mm thick melamine on both sides.The lamination is done with hot press with minimum of 90 tonnes pressure along with Knee space with leg support.Electrical sockets - 2 sockets (5/16 Amps) of 2 sets (total 4 nos) of ANCCHOR/HAVELLS /LEGRAND integrated with switch and power indication provided on each work station.Provision of 5 numbers of LAN port (without wiring). The cabin/table should be ergonomically positioned and all works as per approved design, colour and direction of Engineer-in-charge.

Mid Back Chairs - Supplying of Md Back Chairs chair with back rest,revolving,hand rest and gas filled height adjustable system with castor wheel for easy movement on the floor of approved brand and manufature as approved by the Engineer-in-charge.

INQBE INNOVATIONS PRIVATE LIMITED

R SURESH KUMAR

Ajayakumar K