HOA 2215VN Grant

Manufacture, Supply, & Delivery of 140mm dia HDPE Pipe PE-100 Grade 6 Kgs/cm2 conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes etc complete For 1.00 Rmt

Earth work excavation in BC soils, red earth and ordinary gravelly soils for pipe line trench of size 0.70 x 1.00 Mts using 2/3 quanity with machinery and 1/3 quantity with manual including laying and jointing of 140 mm dia HDPE PE-100 Grade 6 Kgs/cm2 true to alignment and testing the pipe line with hydralic field test pressure with water minimum lead of 500mts including refilling the trench with excavated earth including cost of pipes and all labour charges etc., complete., but excluding taxes on HDPE pipes etc., complete.,

Supply and delivery of 150mm dia PN 1.60 (MPa) "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation SSR Rate ( on 140mm dia HDPE Pipe line -( MAT-08070 )

Supply & Delivery of Tamper Proof DI Flanged Single Chamber 50mm dia PN 1.60 Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to IN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation.