Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC | L1 | Accepted-AOC Dinesh Construction accepted L1 | |
| 2 | L2₹32.6 L+₹2.9 L (9.81%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹33.0 L+₹3.2 L (10.9%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹36.8 L+₹7.1 L (24.0%)Rejected-Finance FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L4 | Rejected-Finance Rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu Road, Pune
GE Dehu Road, Pune
COMPREHENSIVE BR MAINT TO OTM ACCN AT ME LINE OFFICER MESS DEPOT AREA OF ODTD UNDER AGE BR WEST AT GE DEHU ROAD
2023_MES_598123_1
8769
Open Tender
Civil Works
Item Rate
270 days
GE Dehu Road, Pune
Pl ref tender documents
7 documents required · 7 mandatory
₹500
GE Dehu Road, Pune
₹80,000
Yes
27 Jan 2024
24 May 2023
23 Jun 2023
24 May 2023
21 Jun 2023
7 Jun 2023
Amount
Demolition of brick work or stone/boulder masonry , built in cement mortar including all quoins, arches, pillars etc ,but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
M & L for brickworks with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6
M & L for 15 mm thick cement plaster on fair faces of brick work in cement mortor 1:4 including plastered surface shall be even and smooth without using extra cement finish completed
M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of cement primer on plastered surfaces complete all as specified and as directed..
Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.
Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.
M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A complete all as specified and as directed.
S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.
All as per item No. 10 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 all as direced.
M&L full body Vitrified coloured Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.
M&L full body Vitrified coloured Ceramic tiles of light colour shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting to match the vitrified ceramic couloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed.
M&L Glazed ceramic coloured tiles of size 450 mm x 300 mm and 7 mm thick of approved colour as in verticle surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in cement mrotar1:4 including triangular filleting in cement mortar 1:4 on top of skirting/dado etc complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.
M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.
M&L for 18-20 mm thick Granite (of any type) machine cut bedded and jointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed in CM 1:4 complete all as specified and directed.
M&L for 18-20 mm thick Granite (of any type) machine cut in skirting/dado laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed
Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n exc 4 sqm each complete all as specified and as directed
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed
Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
M&LFlush shutter solid core 30 mm thick with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed
M&L Plain framed, panelled shutter (two panel) 35mm thk with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F aluminium powder coated window sliding type (3 track) with frame size100x35x1.2mm and shutter 39.40x17.70x1.2mm with two glass shutter & one mesh shutter incl necessary jointing cleats glazing clips, rubber packing,and locking arrangement powder coated aluminium snap beading screws including 3mm plain float glass & 0.36 mm dia and 1.4 mm width of aperture, Stainless Steel wire mesh, fittings etc complete all as specified and as directed.
S&F in repairs Butt Hinges stainless steel 100 mm long pin, bright polished and fixed, typeB-11 complete
S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast orextruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.
S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.
S&F 150mm long Aluminium handles cast type anodised
S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel shutters all as directed.
M&L for preparation of surfaces and applying applying two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer.
Dismantling water tanks and removing to store of capacity exc. 250 litres & n.exc 500 litres.
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.
S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed.
S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure fancy type, chromium plated with longshank and cup (concealed type) screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.
S&F in repairs 15 mm dia bib taps fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.
S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity upto 500 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 500 litres and not exc. 1000 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.
S&F in repairs vitreous china squating pan Orissa pattern of size 580x440 mm white with integral foot rest (excluding flushing cistern and flush pipe) all as specified and as directed by Enginner-in-Charge
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl all necessary accessories all as specified and as directed by Enginner-in-Charge
S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.
S&F in repairs 10 ltr capacity PVC valve less syphonic action type flushing cistern low level, white with inlet ball valve, float and handle including necessary brackets & screws, flush pipe as required complete all as specified and directed.
S&F in repairs Grating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed.
S&F in repairs vitreous china squating pan Orissa pattern of size 580x440 mm white with integral foot rest any pattern complete all as specified and directed.
Dismantling/ taking down AC waste / vent pipes fixed to walls with all fittings/ accessories 110/75 mm dia pipes all as specified and directed by Engineer-in-Charge
S&F in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm dia complete all as specified and directed by Engineer-in-Charge.
S&F in repair 110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge.
S&F in repair 110 mm dia PVC (SWR) branch piece (Single Y) equal or unequal complete all as specified and directed by Engineer-in-Charge.
S&F in repair 110 mm dia PVC (SWR) branch piece double, (Double Y) equal or unequal complete all as specified and directed by Engineer-in-Charge.
S&F in repair 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.
Fixing only 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
Fixing only 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed..
S&F in repair brass chromium plated bottle traps 32 mm dia for wash basin with inlet and outlet screwed for pipe or connection including necessary packing, union and cap and fixed
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S& F in repairs stainless steel Sinks for kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed by Engineer-in-Charge
S&F 20 mm dia stainless steel medium grade curtain rod fixing in brackets including stainless steel brackets (02 Nos bracket) each in door/windows with side knob as specified and directed complete including fixing in any opening.
Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.
S&F Aluminium anodised snap grid false ceiling, for insulation and acoustic purpose, using standard aluminium sections of size 35.60 mm x 23.60 mm x 1.60 mm as in wall angle, 23.60 mm x 23.60 mm x 1.60 mm as in Main/ Cross Tees and 26.00 mm x 26.00 mm x 1.60 mm angles for grid of size 605 x 605mm suspended with 4mm dia. GI wire at intervals n.exc. 600mm centre to centre and fixed to roof truss with suitable size MS hooks and fastening bolts etc. from sloping/flat roof including 12 mm thick Gypsum ceiling boards of size 600mm x 600mm fixed with clips to aluminium snap grid including preparation of exposed surfaces of ceiling boards and applying two coats of acrylic emulsion distemper over a coat of primer all as specified and as directed.
S&F 10 mm thick plaster of Paris (gypsum anhydrous) ceiling on flat surface up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) as specified and as directed.
-Ditto- as per above item but for sunk or raised moulding complete all as specifie all as specified
Anodised aluminium snap grid frame work for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifie all as specified
S&F soild PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and as directed
S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifiaction complete all as specified and as directed by Engineer-in-Charge
Dismantling boarding of any description, fixed in any position all as specified and directed by Engineer-in-charge.
Dismantling timber fillets of section n.exc. 40 sqm in frame for wall panelling as unframed work complete all as specified and directed by Engineer-in-charge.
M&L for clean sawn second class hardwood in scantling.complete all as specified and directed by Engineer-in-charge.
M&L for 9mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-charge.
M&L Decorative laminate type-I 1.5 mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions
M&L for 2nd class hardwood bullnosed fillets, splayed chamfered or round or one edge or face, wrought secured with nails area exc. 6 & n.exc. 13 Sqcm. complete all as specified and directed by Engineer-in-charge.
M&L for french polishing on surfaces of description, width or girth including cleaning and preparing the surface including a coat of wood eiller on new works with two or more coats.complete all as specified and directed by Engineer-in-charge.
S&F medium density particle board, 25mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWP adhesive , fixed with screws to timber frame work/steel frame work for kitchen cabinet etc complete all as specified
M/L for taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land and applying water proofing treatment as under :-(a) Rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction by weight of cement, levelling to receive water proofing treatment (WPC shall be measured & paid seperately) (b) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (c) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (d) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (e) Finally applying a coat of solar reflective (f) The make / treatment shall be from the one of the following manufacturer:-(i) 'Moply FP' of M/s Texsa (I) Pvt Ltd (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydroflame' of M/s Hydrotech Ltd.bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane.
Supply only Liquid water proofing compound .
Demolition of cement concrete (unreinforced) in Suken portion exe 15 cm thickness (below or aboveground level) complete all as specified and directed.
Providing and carrying out water proofing treatment to toilet, sunken slabs, wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturer's specification paint complete all as specified and directed.
M & L cement conrete 1:7:12 type F2 (uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed.
S.R.M.K Enterprises
DR J S CHADHA AND SONS
H S TAKHI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .