Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.9 L+₹1.1 L (5.61%)Rejected-Finance AIR FORCE ROAD NEAR BRIDGE OPP KHETIWADI RAJIV NAGAR JAMNAGAR 361002 | JAMNAGAR | JAMNAGAR | GUJARAT | 361002 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹21.0 L+₹1.2 L (6.00%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹21.5 L+₹1.6 L (8.28%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹21.9 L+₹2.1 L (10.4%)Rejected-Finance AIR FORCE ROAD NEAR BRIDEES CORP KHELTIWADI RATIY N 9306 JAMNAGAR GUJARAT 361 006 | JAMNAGAR | JAMNAGAR | GUJARAT | 361006 | L5 | Rejected-Finance Not being L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Jun 2021, 6:00 pmClosed
GE I NAVY JAMNAGAR
INS NAVY VALSURA JAMNAGAR 361150
WELCOME MAINTENANCE OF CERTAIN SAILORS OFFRS MD ACCN INCLUDING REPAIR REPLACEMENT SANITARY FITTINGS AND CLEANING OF TANKS AT VALSURA JAMNAGAR
2021_MES_436203_1
8512
Open Tender
Civil Works
Item Rate
300 days
GE I NAVY JAMNAGAR
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE I NAVY JAMNAGAR
₹40,000
Yes
15 Jul 2021
13 Apr 2021
3 Jun 2021
13 Apr 2021
1 Jun 2021
26 May 2021
13 Apr 2021 - 25 May 2021
Amount
Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MD land complete all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), stacking ser-viceable tiles at site and removal of debris as ordered outside MoD Land complete all as specified.
Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO , Acco Proof , Impermo , Aqua flex as approved.
S&F in repairs 100 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed.
S&F in repairs 150 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed.
S&F in repairs 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.
S&F in repairs 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed. Make: Cera Cat No. F5001103 or equivalent in approved make.
S&F CP brass towel ring fixed with and including CP brass screws and plastic cleats complete. Make: Cera cat No. F5001105 or equivalent in approved make.
S&F in repairs 25 mm dia decorative stainless steel curtain rails including SS finials and brackets complete all as directed.
S&F in repairs XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.
M&L for light shade double charged vitrified coloured tiles 10mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm, but not exceeding 1.00 sqm in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match with tiles laid over and including 15mm thick screed bed in cement mortal 1:6 complete all directed and specified.
M&L for non skid coloured ceramic tiles of size 300x300x7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1 :6 complete all directed and specified.
M&L for glazed ceramic coloured tiles of size 600x300x7 to 8 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed.
M&L for light shade double charged vetrified coloured tiles 10 mm thick (square/ rectangular), area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm as in skirting / dado / vertical surfaces etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles and including 10 mm thick rendering in cement mortar 1:4 complete all directed and specified. (Note for item No 12 to 15 : i) Quoted rate is deemed to be inclusive of cement mortal screed bed/ back coat. ii) Colour of tiles shall be got appproved before incorporation in the work)
M&L for 16 to 18 mm thick granite slab (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin counter and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with WPC as per manufacturer instruction and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC measured and paid separately).
M&L for rendering 10 mm thick in CM 1:6 on fair faces brick work or concrete surfaces, finished even and smooth without using extra cement complete all as directed.
M&L Preparation of old surfaces of wall including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as directed.
All as per item No 19 here-in- above but two coat of white wash.
All as per item No 19 here-in-above but one coat of colour wash.
M&L Preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc by hand held sander / long handle sander(Plastered or unplastered surfaces) and applying one coat of white (lime) wash complete all as directed.
M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and washing and applying one coats of oil bound distemper by mechanical means / auto roller including filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed.
All as per item No 23 here-in - above but one coat of cement base paint -do -
M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and Jet pressure washing and applying one coat antifungal exterior weather proof paint applied by mechanical means i.e Airless spray including filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed.
M&L complete removal of existing any type of treatment of walls by rubbing, scrapping by hand held sander / long handle sander and finally Jet pressure washing to the entire satisfaction of Engineer-in-Charge and applying two coats of oil bound distemper by mechanical means / auto roller over a coat of 0.50 mm thick white cement based putty mixed with multi purpose mixer complete all as specified.
M&L prepration of old treated surface of walls and apply one coat of plastic emulsion paint after filling undulations with white cement based putty complete all as directed.
M&L complete removal of existing any type of treatment of walls by rubbing, scrapping by hand held sander / long handle sander and finally Jet pressure washing to the entire satisfaction of Engineer-in-Charge and applying two coats of cement based paint complete all as directed.
M&L complete removal of existing any type of treatment of walls by rubbing, scrapping by hand held sander / long handle sander and finally Jet pressure washing to the entire satisfaction of Engineer-in-Charge and applying two coats of antifungal exterior emultion weater proof paint by Airless spray machine over a coat of 0.50 mm thick white cement based putty mixed with multi purpose mixer complete all as directed.
M&L preparation of old painted wooden surfaces exc 10 cm width or girth all as specified in SSR Part-I and applying one coat of Ist quality synthetic enamel paint, complete all as directed.
All same as per item No 30 here-in-above but on steel suface
M&L French polishing two or more coats on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works until high glossy finish is obtained complete all as directed.
M&L preparing new plastered wall surfaces by rubbing, scrapping by hand held sander / long handle sander and washing and applying two coats of oil bound distemper by mechanical means / auto roller applied over a coat of alkali resistant primer over a coat of 1 mm thick white cement based wall care birla putty complete all as directed.
M&L preparation of newly plastered wall surface by rubbing, scrapping by hand held sander / long handle sander and finally Jet pressure washing to the entire satisfaction of Engineer-in-Charge and applying two coats of cement base paint over a coat of alkaline resistant primer complete all as directed. Note for Sch 'A' item Nos 19 to 34 : 1. For measurement purposes in respect of those building for which audited periodical services measurement book are available, quantities shall be taken from PSMBs direct and entered in measurement book (IAFW-2261) and in respect of those buiidings for which audited PSMBs are not available, detailed measurements of works shall be taken and entered in measurement book in the usual manner. 2. Any fittings or fixtures disturbed or damaged during the progress of work, will either be rectified or replaced by the contractor himself without any delay and at no extra cost to the Govt. 3. Prior approval of colour shade/ tint is mandatory from GE (I) Navy before commencement of work. 4. The quoted rate aganist various items of above Schedule is deemed to be inclusive of prepration of surface with Hand held sander / long handle sander, cleaning the wall/ ceiling surface with jet pressure washer, mixing putty with multipurpose mixer, appying Anti fungal paint with Airless spray appliance, and applying distemper & Plastic emulsion with Mechinal means / Auto roller as ordered. Engineer-in-Charge should ensure that Contractor's are obtained prior approval of cleaning & application items before commencement of perodical work.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.5 sqm in each pane complete all as directed.
Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads and removal of debris os ordered outside MoD land complete all as directed.
Cleaning and removing all scale and dirt, etc, from tanks of capacity exeeding 250 ltrs and not exceeding 500 ltrs and from mouths of circulating pipes, etc.
Cleaning and removing all scale and dirt, etc, from tanks of capacity exeeding 500 ltrs and not exceeding 1000 ltrs and from mouths of circulating pipes, etc.
Taking down 15 mm bore of pipe old GI tubing and connection including cleaning for re fixing stacking at site where directed.
Taking down 20 mm bore of pipe old GI tubing and connection including cleaning for re fixing stacking at site where directed.
M&L for 15 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.
M&L for 20 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.
S&F in repairs 20 mm ball brass valve, high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed. Make: Venus or as approved by GE.
S&F in repairs 15 mm bore bib taps long nose with wall flange, fancy type, cast copper alloy, chromium plated, long shank screwed for iron pipe or for brass ferrule complete all as directed. Make: Cera Cat No. F1005152 or equivalent in approved make.
S&F in repairs 15 mm bore two way bib tap fancy type, brass, chromium plated with flange and aerator, screwed for iron pipe or for brass ferrule complete all as directed. Make: Cera Cat No. F1005161 or equivalent in approved make.
S&F in repairs health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe and wall hook mounted type complete. Make: Cera Cat No. F8030102 or equivalent in approved make.
S&F in repairs 15 mm bore pillar taps, chromium plated brass with aerator, long shank screwed and fly-nuts, screwed for iron pipe or for brass ferrule complete all as directed. Make: Cera Cat No. F10050101 or equivalent in approved make.
S&F in repairs brass chromium plated overhead shower rose 85mm (3.5") dia with single flow and shower arm fixing to steel pipe or union complete. Make: Cera Cat No. F7020105 or equivalent in approved make.
S&F in repairs stop valve with wall flange 15 mm bore of pipe, brass chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete. Make: Cera Cat No. Exposed part of stop cock consisting sleeve, lever and flange F1005351 & concealed part F4050102 or equivalent in Hindware, Parryware.
S&F in repairs 15 mm bore angle cock with wall flange, chromium plated brass, screwed both for iron pipe or brass ferrule complete all as directed. Make: Cera Cat No. F1005201 or equivalent in approved make.
S&F in repairs 15 mm bore single lever brass, chromium plated, wall mixer with 90 degree swivel spout and provision for telephonic shower arrangement, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed. Make: Cera Cat No. F1005414 or equivalent in approved make.
S&F in repairs PVC connections 15 mm dia, 450 mm long, with PTMT nuts & washers at both ends.
M&L grating square 140 mm size of stainless steel. (Minimum weight 50 gms).
S&F in repairs 550 mm x 400 mm size white flat back, vitreous china wash hand basin including cutting for and pinning ends of brackets or erecting stand, waste coupling & waste pipe complete all as directed.
S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as specified.
S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as directed.
S&F in repairs vitreous China squatting pan 'Orissa' pattern of size 580x440 mm white with integral foot rests water closet (Squatt pattern) including provision of lime concrete bedding with connecting to trap anti syphonage pipe etc. complete all as directed.
S&F in repairs vitreous China ware wash down water closet pan (Pedestal Pattern) (EWC), white with fixing bolt to floor and connecting pan to trap, pedestral pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe including seat cover complete all as directed.
Taking down any type & size of damaged sink and S&F sink without draining board, glossy finished, made out of 1.00 mm thick stainless steel sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in CM to dwarf wall or including fixing cantilever brackets, connecting union overall size 495x420 mm with bowl size 410x330x160 mm complete.
Taking down any type & size of damaged sink and S&F new sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed.
S&F in repairs corrosion resistant Stainless Steel kitchen plate rack of size 31x30x10 inch, with 0.80 mm thick Stainless Steel sheet (min weight 7.00 kg) fixed to walls with nails complete all as directed. Make: Prayag or equivalent in approved make.
S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including brass float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing including dismantling existing PVC/RCC water tanks any capacity fixed in any description and stacking at site complete all as directed.
S&F new 1000 litres capacity rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including brass float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing including dismantling existing PVC/RCC water tanks any capacity fixed in any description and stacking at site complete all as directed.
Suraj Builders
AARTI ENTERPRISE
Jyoti Refrigeration
SohanandCompany
M/s Balaji Enterprise
aarti construction
S t modi
Amar Constructions
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .