Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical VPO BHAPOO TEHSIL INDORA DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 175013 | Accepted-Technical all document are correct |
| 2 | Accepted-Technical MINISTRY OF DEFENCE MES | WEST KARBI ANGLONG | ASSAM | 782413 | Accepted-Technical all document are correct |
Tender Value
₹10.3 L
EMD Value
₹20,500
Closing Date
8 Feb 2026, 5:00 pmClosed
Executive Engineer
Executive Engineer HPPWD Division Indora
Providing and Laying G.III and 20mm hick premix carpet in Km. 0.00 to 1.00
2026_PWD_127109_1
7880-90 dt. 24.01.2026
Open Tender
Civil Works
Percentage
60 days
Indora
Please refer as tender document
8 documents required · 8 mandatory
₹500
Yes
₹20,500
Yes
31 Mar 2026
31 Jan 2026
9 Feb 2026
31 Jan 2026
8 Feb 2026
31 Jan 2026
Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with smooth wheel 80-100(eighty-hundred) K.N. static Road roller in stages to proper grade and camber, applying and bromming, crushable screening at the rate of 0.22 cum ( zero point two two cubic meters) per ten square meters, to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –III, 53mm to 22.4mm ( Fifty three millimeters to twenty two point four millimeters) size, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications clause No. 405 by Mechnical Means including of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 complete as per the direction of Engineer-in-charge including carriage of materils within all leads and lifts and other incidential. The rate is including octri , Royality , Malkana , Toll Tax , Sale Tax ,GST or any other taxes imposed by the Government.
Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion pressure distributor at the rate 0.25 to 0.30 kg (zero point two five to zero point three zero kilogram) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 503 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing, laying and rolling open graded premix carpet of 20mm ( twenty millimeter) compacted thickness composed of 13.2mm ( thirteen decimal two millimeter) to 5.6 ( five decimal six millimeter) aggregate for wearing coarse including loading of aggregate with front end loader heating binder and aggregate in hot mix plant 30/40 (thirty/forty) tonne per hour capacity transporting mixed material with tipper to site of work and laying with paver finisher to the required grade and camber rolling with power road roller 8/10 (eight/ten) tonne using 0.27 cum (zero decimal two seven cubic metres ) of graded stone aggregate mixed with 14.6 kg (fourteen point six kilogram)of bitumen binder using VG-10 (Viscosity grade- ten) per ten square meter of road surface to required line grade and level but excluding the cost of tack coat and seal coat inclusive of all corrective measures such as laying of profile corrective coarse for all depth filling of depression for all depth and construction of super elevation and camber, where required as per M.O.R.D. technical specifications section 500 by mechanical means or as directed by the Engineer-in Charge including carriage of material within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels ,grade and cross fall using type B at the rate of 6.8 kg (six point eight kilogram)per ten square metre mixed with crushed sand defined as passing 2.36mm sieve at the rate of 0.06 cum (zero decimal zero six cubic metre) per ten square metre using bitumen VG-10 (Viscosity grade- ten) by mechanical means as per MORD technical specification section 500 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of material with in all leads, lifts and other incidentals .The rate is including octori, royality,malkana ,toll tax,GST, or other taxes imposed by the Government.
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.06 MB
SBDMANWAL.pdf
Tender Documents • 5.84 MB
BOQ_187632.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .