REPAIR REWIRING AND REPLACEMENT OF INTERNAL FITTING AND FIXUTRE AND OTHER CONNECTED ITEM IN MD AND OTM ACCNS AT TBRL RANGE RAMGARH

Amount

Taking down carefully copper /aluminium point wiring (Light, fan, socket, or power) complete including fittings and fixture such as switches, ceiling roses pendents, regulators sockets / DBs / main switches include boards etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately), removing material, from site and making good the disturbed surfaces of walls, floor complete all as specifed and directed.

Taking down the existing unserviceable main switches/DBs any type including boards from its position and making the good of disturbed surface complete all as directed.

Taking down carefully by sub main wiring/service connection of any type complete all as specifed and directed.

Point wiring with 1.5 Sqmm (nominal area) PVC (FRLS) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item. For one light point controlled by one switch complete.

All as per serial item No 4.00 above but for one fan point controlled by one switch complete.

All as per serial item No 4.00 above but for bell point controlled by one bell push complete.

All as per serial item No 4.00 above but for one light point controlled by two way switchs complete.

All as per serial item No 4.00 above but for 5 pin 5 Amp socket outlet on the same board with other switch, sockets.

All as per serial item No 4.00 above but for 3 pin 5 Amp socket outlet independent complete.

All as per serial item No 4.00 above but for 3 pin 15 Amp socket outlet independent with 2.5 Sqmm copper conductor complete.

All as per serial item No 4.00 above but for one 20 Amp, plug and socket point and wiring with 4.0 Sqmm PVC insulted, stranded, unsheathed copper conductor cable & 2.50 Sqmm unsheathed PVC insulated earth wire on Independent board for Geyser/AC

Material and labour for point wiring in existing concealed conduit with PVC insulated, unsheathed, single core two run multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in existing PVC conduit medium grade and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item. For light point controlled by one switch complete.

All as per serial item No 5.00 above but for fan point controlled by one switch complete.

All as per serial item No 5.00 above but for bell point controlled by one bell push complete.

All as per serial item No 5.00 above but for one light point controlled by two way switch complete.

All as per serial item No 5.00 above but for 5 or 3 pin 5 Amp socket outlet on the same board with other switch, sockets.

All as per serial item No 5.00 above but for 5 pin 5 Amp socket outlet independent complete.

All as per serial item No 5.00 above but for 3 pin 15 Amp socket outlet multipurpose independent using 2.5 Sqmm FR Copper conductor with 1.5 sqmm multistranded FRLS copper conductor as earth Wire.

All as per serial item No 5.00 above but for one 20 Amp, plug and socket point and wiring with 4.0 Sqmm PVC insulted, stranded, unsheathed copper conductor cable & 2.50 Sqmm unsheathed PVC insulated earth wire on Independent board for Geyser/AC

Material and labour for point wiring in PVC casing caping medium grade ISI marked with its acessories and fixing with PVC insulated, unsheathed, single core two run multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and as directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item. For light/Fan/Bell point controlled by one switch complete.

All as per serial item No 6.00 above but for light point controlled by Two way switch complete.

All as per serial item No 6.00 above but for 5 pin 5 Amp socket outlet on the same board with other switch, sockets.

All as per serial item No 6.00 above but for 3 pin 5 Amp socket outlet independent complete.

All as per serial item No 6.00 above but for 3 pin 15 Amp socket outlet independent with 2.5 Sqmm copper conductor complete.

All as per item No 6.00 above but for one 20 Amp, plug and socket point and wiring with 4.0 Sqmm PVC insulted, stranded, unsheathed copper conductor cable & 2.50 Sqmm unsheathed PVC insulated earth wire on Independent board for Geyser/AC

Modular switch one way 6 Amp,1 Module complete all as specified and directed.

Supplying and fixing Modular socket, 6 amps-2/3 pin combined, 2 Module complete all as specified and directed.

Supplying and fixing Modular switch , one way, 16 amps, one Module complete all as specified and directed.

Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module complete all as specified and directed.

Supply and fix Modular switch 2 way 6 Amp,1 Module complete all as specified and as directed.

Supply and fix Modular bell push 6 Amp,1 Module complete all as specified and as directed.

Supply and fix Modular Fan regulator electronic step type 230 V 2 Module complete all as specified and as directed.

Supply and fix in repairs Ceiling rose surface type, PVC/Polycarbonate islated body size 50x28 mm two to three terminals.

Supply and fixing call bell, 6 Amps, 230 Volts, SP complete all as specified.

Supply and fix PVC condute/casing caping as required 25mm including of all tee, bend, elbow etc with fixing accessories complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 1 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 2 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 3 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 4 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 6 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 8 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 12 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 18 Module complete all as specified and directed.

Supply and fix metal fiush mounting box 1/2 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 3 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 4 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 6 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 8 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 12 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 18 module of complete all as specified and directed.

Material and labour wiring for circuit/ sub main wiring alongwith earth wire with the following sizes of PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in Concealed/surface as required using following sizes of cables inciuding in PVC conduit/casing caping :- a) 2x1.5 Sqmm+1x1.5 Sqmm earth wire,

All as per serial item No 32.00 above but 2x2.5 Sqmm+1x2.5 Sqmm earth wire

All as per serial item No 32.00 above but 2x4.0 Sqmm+1x4 Sqmm earth wire

All as per serial item No 32.00 above but 2x6.0 Sqmm+1x6 Sqmm earth wire

All as per serial item No 32.00 above but 4x6 sqmm+2x6 Sqmm earth wire

All as per serial item No 32.00 above but 4x10 sqmm+2x6 Sqmm earth wire

All as per serial item No 32.00 above but 4x16 sqmm+2x16 Sqmm earth wire

Supply and Fixing for lamp holder insulated body with back plate for batten fitting complete all as specified.

Supply and fix surface and wall mounted GLAZE LED Batten 9/10W fitting with decorative end caps LED lighting fixture delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 10W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed by Engr-in-charge.

Supply and fix surface and wall mounted GLAZE LED Batten 20/24W light fitting with decorative end caps LED lighting fixture delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 20/24 Watt LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed by Engr-in-charge.

Supply and fix Sauver 2'x2' 36W LED suitable for armstrong/grid/POP ceiling, ultra slim 2x2 LED flat panel delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with seprate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge.

Supply and fix Sauver 1'x1' 20W LED suitable for armstrong/grid/POP ceiling, ultra slim 1x1 LED flat panel delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with seprate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge.

Supply and 1’x4’ 40 Watt LED suitable for surface/ recess mounting 1’x4’ LED flat panel delivers high brightness and excellent illumination with extruded aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV and IR radiation complete with separate electronic driver and high brightness SMD LEDs, complete with connecting accessories and Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible copper cable cord from fitting complete all as specified and directed by Engineer-in-Charge.

All as per serial item No 38.00 above but suitable for armstrong/grid/POP ceiling ultra slim 1'x4' LED 40 W

Supply and fix Nero Surface mounted (Round) LED 18W downlighter with white powder coated aluminium die cast housing delivers high brightness & excillent illumination even in high ceiling areas with CRCA White powder coated provided for frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a separate electronic constant current driver with no UV & IR radiation, energy efficent surface mounted ready to use pack 18W LED, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix LED Bulk Head 10W -IP65 decorative oval bulk head edge LED lighting fixture comprising of pressure die cast housing with acrylic diffuser IP 65 protection, frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a inbuilt electronic constant current driver with no UV & IR radiation,energy efficent surface mounted ready to use pack 10W LED, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs freedom plus LED Street light 30 W made up of Pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection complete all as specified and as directed.

Supply and fix LED Highway luminare 70 W -IP65 decorative oval edge LED lighting fixture comprising of pressure die cast housing with acrylic diffuser IP 65 protection, frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a inbuilt electronic constant current driver with no UV & IR radiation,energy efficent surface mounted ready to use pack 70 W LED, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-Charge.

S&F industrial LED High bay 150 W Luminaire ENDURA HIGHBRITE PLUS Energy saving, Enviormental friendly & robust open type vertical Highbay/Mediumbay LED IP54 luminaire with high power COB LED 150W 6500K complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-Charge.

S&F sheet metal inclouser single pole and neutal with 02 Pin and earth plug and socket complete with 01 single pole 20 Amps 240volts, MCB complete incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified and directed by Engr-in-Charge.

Supplying and fix in repair Tempra plug & socket DB and MCBs, triple pole and neutral enclouser with a Four pin and earth plug and socket complete with one TPN MCB , 440V of capacity 32 amps of complete all as specified and and directed by Engineer-in-Charge.

Supply and fixing sheet metal enclosure for DBs when MCBs to be used single pole and neutral single door, 240 volt without bus bar 2 way of incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure for DBs when MCBs to be used single pole and neutral with IP 43 protection, 240 volt with 200 amps rated bus bar bar 4 way of incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure for DBs when MCBs to be used single pole and neutral with IP 43 protection, 240 volt with 200 amps rated bus bar bar 8 way of incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure for DBs when MCBs to be used single pole and neutral with IP 43 protection, 240 volt with 200 amps rated bus bar bar 12 way of incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Sheet metal enclosure for DB’s TPN, with 200 amps rated bus bar , 4 way, 415 volts double door surface/reccess mounting including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs, connectors etc

Supply and fix in repairs Sheet metal enclosure for DB’s TPN, with 200 amps rated bus bar , 6 way, 415 volts double door surface/reccess mounting including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs, connectors etc

Supply and fix in repairs sheet metal enclouser distribution board 415volt,Vertical TPN 4 Way with provision for suitable MCCB FP up to 125 A as incomer & MCBs as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-54 protection, , including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs, connectors etc.

Supply and fix in repairs sheet metal enclouser distribution board 415volt,Vertical TPN 6 Way with provision for suitable MCCB FP up to 160 A as incomer & MCBs as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-43 protection, , including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs, connectors etc.

Supply and fix in repairs sheet metal enclouser distribution board 415volt,Vertical TPN 8 Way with provision for suitable MCCB FP up to 250 A as incomer & MCBs as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-54 protection, , including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs, connectors etc.

Supply and fix MCB SP 6 to 32 Amps 240 volts 10 KA C series.

Supplying and fixing MCB SPN 6 to 32 Amps 240 volts.

Supplying and fixing MCB SPN 40 to 63 Amps 240 volts 10 KA.

Supplying and fixing MCB TP 40 to 63 Amps 415 volts.

Supplying and fixing MCB TPN 40 to 63 Amps 415 volts.

Supply and fixing in repairs MCCB, 4-pole, breaking capacity 36 KA, 415 volts, 250 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing in repairs MCCB, 4-pole, breaking capacity 36 KA, 415 volts, 200 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing in repairs MCCB, 4-pole, breaking capacity 36 KA, 415 volts, 160 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing in repairs MCCB, 4-pole, breaking capacity 36 KA, 415 volts, 125 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing in repairs MCCB, 4-pole, breaking capacity 25 KA, 415 volts, 100 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing MCCB, 4-pole, breaking capacity 25 KA, 415 volts, 63 Amps including taking down unservicable one complete all as specified and directed.

Taking down carefully flame proof wiring complete and removing material from site and making good the disturbed surfaces of walls/ ceiling etc. complete all as specified and directed.

Taking down carefully unserviceable FLP WP well glass fittings, bulk head fittings, tube light fittings complete and removing material from site and making good the disturbed surfaces of walls/ceiling etc complete all as specifed and directed.

Taking down carefully unserviceable FLP WP switch sockets, junction box complete and removing material from site and making good the disturbed surfaces of walls/ceiling etc complete all as specifed and directed.

Material and labour for point wiring FLP-WP with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code in & including ERW metallic rigid steel conduit including earth wire of PVC insulated FRLS copper conductor of 1.5 Sqmm size in green colour making good the disturbed surfaces, for one light/fan point controlled by one switch complete all as specifed and directed.

All as per serial item No 69.00 above but for 3 pin / 5 pin, 16 Amp socket outlet point controlled by one switch and wiring with 2.5 Sqmm PVC insulated (FRLS), multi-stranded, unsheathed copper conductor cable & 1.5 Sqmm unsheathed PVC insulated (FRLS) earth wire on Independent board.

Material and labour for point wiring FLP-WP with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code in existing ERW metallic rigid steel conduit including earth wire of PVC insulated FRLS copper conductor of 1.5 Sqmm size in green colour making good the disturbed surfaces, for one light/fan point controlled by one switch complete all as specifed and as directed.

All as per serial item No 71.00 above but for 3 pin / 5 pin 16 Amp socket outlet point controlled by one switch and wiring with 2.5 Sqmm PVC insulated (FRLS), multi-stranded, unsheathed copper conductor cable and 1.5 Sqmm unsheathed PVC insulated (FRLS) earth wire on Independent board.

Supply and fixing in repairs FLP - WP well glass fitting suitable for 100 watt LED, duly wired complete with necessary fixing arrangement and electric connection and testing complete all as specified and directed.

Supply and fixing FLP - WP LED 70/72W well glass fitting duly wired complete with necessary fixing arrangement and electric connection and testing complete all as specified and directed.

Supply and fixing in repairs FLP-WP LED light fittings in aluminium alloy LM-06, 2 x 20 watt LED including 02 Nos. LED tube 20 watt with, connector block etc with all accessories prewired and including making electrical connection complete all as specified and directed.

Supply and fix flame proof LED fitting 1x20 Watt, body made out of cast aluminium alloy, epoxy painted alongwith wire guard complete with all accessories such as flame proof clear glass tubing to house LED tube, LED tube light 1 x 20 watt including suspended on ceiling with 2 Nos dia ERW conduit of suitable length incl fixing arrangement and connecting up, confirming to IS-60079 and approved by CMRI all as directed by Engineer-in-Charge.

Fixing only FLP-WP tube light fittings 1x40/ 2x40 watt, 230 volts, FLP-WP well glass fitting or FLP-WP bulk head light fitting on wall/ceiling with necessary nuts and bolts, washers etc complete making electric connections with & including flexible wire of size 23/.0076 upto 1.5 mtr long and metalic flexible conduit complete all as specified and directed. Note : Old serviceable fittings retreived from Serial Item Nos. 70.00 is to be reused.

Supply and fixing FLP - WP Bulk Head LED 16 W fitting duly wired complete with necessary fixing arrangement and electric connection and testing complete all as specified and directed.

Supply and fixing in repairs FLP WP Rotary switch with cable terminal box LM-6 material single pole, on and off 16 Amp complete all as specified and directed.

Supply and fixing in repairs Junction box with plain cover in LM-6 metrial entery size 3/4" ET, dia 80 mm and depth 40mm , 3 way complete all as specified and directed.

Supply and fixing in repairs Junction box with plain cover in LM-6 metrial entery size 3/4" ET, dia 80 mm and depth 40mm , 4 way complete all as specified and directed.

Supply and fixing in repairs FLP-WP switch socket & metalic top plug combination in LM- 6 material rating 16 Amps, 250 V, 2 pole plus earth with plug including necessary fixing arrangement & all out going electric connection complete all as specified and directed.

Supply and fixing in repairs FLP-WP Switch socket and metalic top plug combination in LM-6 material rating 25 Amp, 250 V, 2 pole plus earth with plug including necessary fixing arrangement and all out going electric connection complete all as specified and directed.

Supply and fixing in repairs FLP-WP Switch socket and metalic top plug combination in LM-6 material rating 32/63A , 440 V, 4 pole plus earth with plug including necessary fixing arrangement and all out going electric connection complete all as specified and directed.

Material and labour for sub main wiring with two run single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in existing ERW steel conduit 25 mm dia having wall thickness 2 mm, with and including 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor green colour as earth wire complete all as specified and directed. Note: 02 run single core 10 sqmm cable and one run 6 sqmm earth wire shall be measured as unit.

Supply and fixing in repairs 150 W HPMV Lamp complete all as specified and directed.

Supply and fixing in repairs 150 W HPMV copper ballast complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level,connected to galvanized iron wire of 4 mm dia earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, earth wire protected by and including GI pipe 15 mm bore (light grade) and connected to main switch / MCB DBs box point as directed and including cement concret pit with CI cover 10 mm thick hinged to CI frame all as shown under electrical plate No 3 SSR Pt - I 2009 including painting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel, 20mm bore GI Pipe (Medium grade) for watering, charcoal and salt in alternative layers of 15cm thick all arround the electrode, including necessary excavation and earth work in any type of soil complete all as shown in electrical plate of SSR part-I and testing on completion all as directed.

Arun enterprises

M/s Krishan Aggarwal

D.N.Gupta and Sons