SPL REPAIR TO BLDG NO. T-33 T-34, PROVN OF CHAIN LINK FENCING AND SHIFTING OF ENTRY GATE OF 111 HU AND PROVN OF ASBESTOS SHEET IN TECHNICAL COMPLEX OF ALPHA SQN AT AF STATION BAREILLY

Amount

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area not exc. 1.5 sq. m each complete all as specified and as directed.

Taking down shutters of any description area not exc. 1.0 sq. m each complete all as specified and as directed.

M&L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L for steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed.

S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St.-240 etc complete all as specified and as directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:2:4) type B- 2 (using 40mm graded stone aggregate) as in plinth protection etc complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:4:8) type D- 2 (using 40mm graded stone aggregate) as in PCC path or as a sub base etc complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:2:4) type B- 2, (using 40mm graded stone aggregate) as in path etc complete all as specified and as directed.

M&L for 25mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) surface finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) etc complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces on ceiling in CM (1:3) etc complete all as specified and as directed.

S&F steel rolling shutters (1mm thick laths), with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete and all as spcified and as directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F Ball bearing for rolling shutters complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10 cm in width or girth, not otherwise described with preparation of new steel surfaces complete all as specified and as directed.

M&L for prepration of plastered surface and applying two coats of oil emulsion distemper over a coat of primer over a coat of average 1 mm thick cement based wall care putty etc complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size (30cm x 30cm) x 25mm thick , set and jointed with grey cement and pointed with neat cement slurry and pigment in floors with and including over 20mm thick screed bed in CM (1:6) etc complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Excavating of post holes in hard/dense soil (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B2 (using 40mm graded stone aggregates) as in PCC bed block etc complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, size of mesh (50 x 50)mm and dia of wire 3mm complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. (each line wire to be measured)

S&F angle iron posts and rails, drilled and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work complete all as specified and as directed.

M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M & L for reinfocement cement concrete (nominal mix) (1:2:4) type B-1 (using 20mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed.

M & L for reinfocement cement concrete (nominal mix) (1:2:4) type B-1 (using 20mm graded stone aggregates) as in columns, pillars, piers, posts struts, etc complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surface etc complete all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, for fair finished surface etc complete all as specified and as directed.

M&L for 20mm thick granite (of any type) tiles machine cut, as in skirting/ dado, laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

S&F stainless steel Alphabets chrome finished having width of each word 20 to 30 cm and to be fixed in wall including all accessories including fastner complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area exc. 1.5 sqm but n exc 4.0 sqm each complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for partition, snap grid, doors, windows, ventilators with one or more rebates including joining cleat etc. for fixing complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 1.00 Kg per running metre including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminum snap beading, screws etc. complete all as specified and as directed.

S&F sheet glass 5.5mm thick, ordinary quality and glazing with oil putty in square but exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 12 mm thick perforated particle board / tiles for insulation and accoustic purpose, (60 X 60)cm size fixed with staples on snap grid as in ceiling complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and fair with and including three coats of white wash after preparation of surface complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed.

S & F for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructionsetc complete all as specified

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc and making good disturbed surfaces of walls complete all as specfied and directed.

Taking down old unserviceable sub main wiring any type and size aluminium/ copper including batten/ conduit and making good the disturbed surface to match with existing complete all as specified and as directed.

Taking down distribution board of any type including cutout, MCBs etc.complete all as specified and as directed.

M&L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including MS pressed steel sheet (1.0mm thick) sunk box with 3mm thick ISI marked laminated bakellite sheet fixed with chromium / nicckel plated screws and washers for switches and sockets, including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly with and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specified and as directed.

Description all as per Srl item No 57.00 here-in- before but for 5 pin 5 amps socket outlet independent board complete all as specified and as directed.

Description all as per Srl item No 57.00 here-in- before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including pressed MS sheet (1.0mm thick) sunken box with 3mm laminated bakellite sheet cover ISI marked suitable for an independant 6 pin 15/16 amps socket outlet, including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface complete all as specified and as directed.

S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

M&L for angle holder, insulated body with back plate with & including LED Lamp 12 Watt suitable for batten fittings complete all as specified and as directed.

S&F LED Street Light Fittings having Ingress Protection class minimum IP-65, suitable for road lighting luminaire with high power LED and maintenance free system for capacity 35 W complete with 32 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including 2 Nos M.S. Flat (25mmx5mm) clamps, nuts, bolts, washers etc. complete all as specified and as directed. Philips Cat Part No : BRP030 LED35 CW MR PSU GR DX, Havells Cat Part No : ENDURA CITY LITE PLAT PLUSSL35W LED 757SASYBOPC Wipro Cat Part No : LR02-391-XXX-57-XX

S&F LED Flood light fitting 70W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high power LED as light source complete with all accessories internally pre-wired complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin 5/6 amps flush type 240 volts complete all as specified and directed.

S&F switch piano flush type one way 16 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F ceiling rose (65 x 50)mm three terminals complete all as specified and directed.

M&L for submain wiring with two single core 1100 V grade FRLSH PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated FRLSH flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI marked of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces complete all as specified and directed. Note:- Two runs of 4 sqmm cable for submain, one run of 4 sqmm cable for eath wire and PVC conduit shall be measured and paid as one run.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm 4 core complete incl taking up old U/S LT UG cable of various sizes complete all as specified and as directed. Note:- Excavation, earthwork and protection of cable shall be measured and paid seperately.

Excavation in trenches in Soft/Loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out all as required for taking of cables and cable protection cover complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated material (Soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

M&L for Dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable in trenches) complete all as specified and directed.

M&L for well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick, complete all as specified and directed.

Making horizontal bore hole under road suitable for 50mm bore size at the depth not less than 1 Mtr below ground level for passing of LT underground cable complete all as specfied and as directed.

Supply, laying & testing for GI tubing medium grade 50 mm dia complete with all fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) in trenches, fixed to wallls complete all as specified and as directed.

Supply, install, testing and commissioning of Indoor type Bus Bar Chamber, made of 1.2mm thick sheet steel duly powder coated and with following specifications :- Aluminium bus bar suitable for TPN 415V 3 Phase, AC Supply and of rating 40 Amp, 4 Way, duly mounted on FRP Insulators complete all as specified and as directed.

S&F sheet steel powder coated distribution board TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs complete all as specified and as directed.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 04 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F MCB single pole 240 volts, 'B' curve of rating from 6 to 32 amps, with rupturing capacity 10 kA,including providing thimble for out going cables complete all as specified and as directed.

S&F MCB TPN 415 volts, 'B' curve of rating from 40 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and as directed.

S&F MCB DP 240 volts, 'B' curve of rating from 40 to 60 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and as directed.

M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level) with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron Wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally upto 150mm below ground level , GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing and marking Bldg Nos and writing Test Results on a 3.0mm thick painted M.S. earth pit marking Plate (200mm x 100mm) duly welded with a 450mm long 10mm dia round M.S. rod, fixed with the earth pit chamber by grouting complete including taking out old unserviceable earthing system including demolishing with old earth pit chambers and removing of debris from the site with levelling the ground all as specified an directed.

VINOD TRADING CORPORATION

NOORI ENTERPRISES

M/s M Aali construction co

S.M. KAZIM

ZAIGHAM ENTERPRISES