Construction of New Rythu Bazar at Palasa (Kasibugga) under AMC, Palasa in Srikakulam District.

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils (SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking including cost of hire charges of T & P, labour charges etc., complete for finished item of work including excluding dewatering charges etc., complete for Foundation of Building.

Filling of foundations with below 2.36HBG from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

P.C.C (1:4:8) prop. Using 40mm HBG machine crushed metal and sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for required period, labour charges for all items all other incidental and operational charges etc., complete as per standard specification and as directed by departmental Engineer for finished item of work.

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

For Plinth Beam

For Roof Slab 100mm Thick

Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Roofing With 0.5mm thick galvanized /pre painted G.I profiled sheets with crimp of 200mm length fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work.

Fabrication and supply of Mild Steel Pipe any size pipe duly welding elements including cost and conveyance of all materials and all labour charges and fabrication charges etc., completed for finished item work.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of Steel bars from approved sources to site of work, binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastages like Overlaps, couplings, chairs, spacer bars etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes on all materials complete for finished item of work.

Brick Masonry in superstructure with CM (1:6) prop: using traditional second class bricks of sixe 23x11x7cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work.

For Superstructure

Providing impervious coat over RCC Roof Slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work.

Plastering with CM(1:5) Prop: 20mm thick including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

For Superstructure

Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

Ceiling Plastering 12 mm thick in CM (1:3) sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete.

VCC M20 Nominal mix using 20mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all other taxes on all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.

Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.

Dadooing to walls with Glazed Coloured Tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5) 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work.

Supply and fixing of Sal wood frame of size 0.12 x 0.07mtrs including cost of Flush Door shutters 30mm thick Teak play both sides including cost of Shutter and frame and labour charges for fixing including cost of steel butt hinges, Steel Tower bolts, Steel Handels, Door lock 200mm and door stopper including cost and conveyace all materials and labour charges for fixing etc., complete for finished item of work as directed by the departmental engineer-in-charge at site. (Shutter Qutation) (Door Size 1.05 x 2.10 Mtrs).

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. (BMT- N.83C) and Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 3 hinges will be required for fixing the door with the frame with fixing all fixures ( BMT N-92)(1050 X 2100 mm).

Providing and fixing Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 3 hinges will be required for fixing the door with the frame with fixing all fixures ( BMT N-92)(Size) 0.75mX2.10m.

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sashextruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (ifrequired), EPDM gasket, woolpile, zincalloy (white powder coated) handle on oneside of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powdercoated) touchlock with hook (if required for wire meshpanel), stainless steel (SS 304 grade)body with adjustable double nylon rollers (weight bearing capacity tobe120kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profileof frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware sand drainage of water etc. After fixing frame the gap between frame and adjacent finished walls hall be filled with weather proof silicon sealentover backer rod of required size and of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single/doublegl asspanes, wire meshand silicon sealent. Two track two panels sliding window made of (big series)frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00sqm.) Note: For uPVC frame and sashextruded profiles minus 5%to lerance indimension i.e. in depth & width of profile shall be acceptable. Variation in profiled imensionin higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Painting with Acrylic Emulsion paint Interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter standard make to Interior faces of new walls two coat of approved make shade and colour over primer coat with Cement Primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.

Painting with Acrylic Emulsion paint Exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter] standard make to Exterior faces of new walls two coat of approved make shade and colour over primer coat with Cement Primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.

Painting to New Wood Work with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over a base coat of Wood primer ( 3 coats) in all to give an even shade after thoroughly brushing the surface to remove all loose materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.

Painting to New Iron work with two coats of Ready Mixed Synthetic Enamel Paint first quality all shades over base coat of Red Oxide making 3 caots including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. In All Floors.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'P' trap including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work.

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with internal components including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work.

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work.

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock including cost & conveyance of all materials and all operational and incidental charges etc., complete for finished item of work.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work. For 22.20mm OD Pipe - SDR 13.5.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) etc., complete for finished item of work as per standard specifications and as directed by the Engineer - in - charge at site of work. For 28.60mm OD Pipe - SDR 13.5.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arragnement & Making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.

Supply and fixing of 12.7 mm NP stop cock Indian makeheavy duty inclduing cost and labour charges etc., complet finished item of work.

Supply and Fixing of 25mm dia 1.8mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant FRLS P.V.C. insulated 1100v grade as per IS:694/1990 sepacification of flexible copper cable (ISI MARK)of makes Ploycab/ Havells/ Suncab / Goldmedal/ million/ Fortune art / Paragon / HPL / L & T / Power flex / RPG / Anchor / Bonton in existing pipe with mini modular type 6A switch with cover frame and Ceiling rose of makes GM / Anchor / Excel / Gold medal /Million / Vimal /Maru / Miltec / CPL & 12 module covering plate of makes legrand Arteor / MK Blenge / Schneider Zen Celo, 12 module metal box to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.

Supply and fixing of batten holder / slanting holder of makes Anchor / Gold medal olive / Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation) of makes Wipro / GE / Philips / Crompton / Bajaj.

Supply and Run of 2 of 36/0.3mm (2.5 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., completecopper cable Makes: Finolex / RR kabel / Havells /KEI.

ELEC-3.8.17. Supply and fixing of 20W, T8, 1200mm length LED retrofit tube light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes: VIN/Surya / Pharox /Greenlites/ Fortune Art / Capart / GM / Goldmedal / Syska / Cosmo / Sieger/Ib LED/P romtec/Eveready/Stanjo/Enrich/Opple b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / VERLIGHT/ San'an.

Supply and fixing of 8 way SPN Distribution board with IP-20 protection suitable for 6 nos SP MCB's single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting with 40A DP Isolator / RCCB / ELCB - 1 No for incomer, 6-32A SP MCBs - 6Nos for outgoing of makes Legrand / Schneider etc., complete.

Providing independent earthling by excavating a trench to a depth of 1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 1.30 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete.

Drilling of Bore wells by with DTH rig drilling to a finished dia of 150/163mm in a formations suitable for down the hole hammer drilling such as medium hard rock formation, all consolidated formations etc., and reaming the Bore to suit inserting of 180mm UPVC casing pipe of 6kgs etc., including insertion of UPVC casing pipe couplings, caps any other relevant materials upto required depth as directed by the department, transportation of drilling rigs and supporting vehicles and including bore development flushing of Bore well at an average pressure of 100PSI conducting yield test about 1 hour crew charges required in fixation of pipes assembly completely done to the satisfaction of the department and stipulated in the Technical conditions enclosed to this schedule for anywhere in Srikakulam District but excluding the cost of casing pipe, the entire work should be carried out as per ISI specification 2000 part 11, 1979. The rate is including all taxes and TOT.

Cost and supply of 250mm UPVC Class - 3 (6 kgs) as per ISI specification IS : 4985/1988 for potable water supplies confirming to IS : 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions specified in the specification with ISI mark, and Transportation etc., complete but excluding all taxes.

Cost and supply of 180mm UPVC Class - 3 (6 kgs) as per ISI specification IS : 4985/1988 for potable water supplies confirming to IS : 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions specified in the specification with ISI mark, and Transportation etc., complete but excluding all taxes.

Labour charges for Slotting to the UPVC casing pipe including Cost & Conveyance of all materials and all labour charges for Slotting etc., complete for finished item of work Table 38 for Bore Wells.

Supply and Run of 2 of 6 Sq.mm WPSC Aluminium cable of makes Polycab / V-Guard / Million / Payal / Vimal / Nakoda along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains.

Fabrication, transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch. Makes: LT / LK / BCH / Crompton/ Siemens.

Supply and Transportation of 5 star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes : As per list of recommended brands as category 1.00HP 10 Stage.

Filling of Basement with Gravel from including spreading in layers irrespective of uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel rooler to achieve the desired density thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

Supply of Name board letter with neat franiming including all labour charges for completion of work.