SPECIALIZED TOOLS FOR CENTRAL WORKSHOP

Toolmaker Vice VICE WIDTH minimum 100 MM

Cast Iron Box Angle Plates (Standard)

Cast Iron Angle plate (Standard)

SS Parallel Block Set (Standard)

Milling Machine Vice (Plain), Width of jaw: min. 150mm, Opening of Jaws should be 200mm

Milling Machine Vice (Swivel type) Width of jaw min. 150mm, Opening of jaws: 200mm

Hardened V- Blocks with Clamps, Sizes: 50mmx40mmx40 mm and 75mmx60mmx60 mm

Vernier Height Gauge 300 mm Vernier Height Gauge; Range: 0-300mm; Resolution: 0.02mm

Surface Plate with Table Cast Iron Surface Plate with Table, Size-1000mm x 630mm x 150mm

Dividing Head for Milling Machine Semi Universal Dividing Head for Milling Machine Rotary Table T with attachment

T- BOLT and Hex. MS Washer Faced Nut T- BOLT (Ø12, Ø10) and Hex. Mild Steel Washer Faced Nut

T-NUT and Allen BOLT Size- Ø12, Ø10

Dovetail Cutters-HSS Dovetail Cutters ANGLE: 45°, with dia: Ø12, Ø16, Ø20

T Slot Cutter-HSS T Slot Cutter DIA 10mm, 12mm, 14mm

CARBIDE Slot drill (Standard) (Dia- 1 mm to 10 mm)

Taper shell End mill Holder with HSS Cutter Taper shell End mill Holder ISO 40 / 22 mm with HSS Cutter

Carbide drill bit set; 1mm to 15 mm Carbide drill bit set; Size Range: 01 mm to 15 mm

HSS-Drill bit Set (2 mm to 15 mm) with 0.2 mm increment

Centre Drill, Dia Range: Ø5mm and Ø10 mm (10 numbers from each Dia)

Drill grinding Attachment

Straight TAP Set with Handle (Metric) Diameter range: 3 mm to 16 mm

TAP EXTRACTOR

BOLT EXTRACTOR

BOX SPANNER set

Lever type dial test indicator

Carbon Steel HAMMER HAMMER (500 gm); Material: Carbon steel

Goose Nose Clamp Length= 125mm-250mm; Width= 40-70mm; Height= 40-80 mm; Material: Standard

Standard Universal Strap Clamp

Standard Nose Clamp Nose Clamp; Sizes- 3inches, 4 inches, 5 inches; Material: Standard; Quantity: 04 No.s from each size

EN8-Step blocks Pair Step blocks Pair; Material- EN-8

PENETRATING OIL Spray

T-Handle Hex Allen Key Set( Metric)

Brass Hammer set with wooden handle (250gm, 500gm, 1 kg); Quantity: 02 No.s each weight (1 set)

CUT-RESISTANT SAFETY GLOVES (Sizes-M, XL); 20 Pair each

Indexable U-drill with inserts for Aluminum and SS; Dia Sizes- Ø10mm, Ø12 mm, Ø14 mm, Ø20 mm; Quantity: 1 Set (10 no.s of inserts from each)

Knurling Tools (Diamond wheel) Material HSS/Carbide, Size: Standard

Standard CENTER PUNCH CENTER PUNCH: Material: TOOL STEEL; Size: Standard; 6" length

POWERTECH INDIA ASSOCIATES

HARI OM TRADERS