GENERAL-MVIP Action plan 22-23-MVIP-Overhauling of motor pumpset and starter unit in Palakuzha LIS(under MVIP Sub Dn 9 )-2022-23-General Electrical Work-

Amount

Part I -Overhauling and Essential work

OD40650/2022-2023:Dismantling the 90 HP motor into stator and rotor, cleaning the windings, attending minor repairs, retaping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with Lithium base grease, heating and baking the windings, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

OD40734/2022-2023:Dismantling the 5HP motor into stator and rotor, cleaning the windings, attending minor repairs, retaping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with Lithium base grease, heating and baking the windings, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

OD40862/2022-2023:Dismantling the starter of 90 HP motor parts by parts, draining the oil, filtering the oil, cleaning the, terminal contacts, cutting, levelling and polishing the contacts wherever necessary, checking the tripping mechanism, replacing the damaged wires, attending minor repairs, and refitting, resetting and making the starter in good working condition.

OD43178/2022-2023:Supply and filling the transformer oil of good quality to the Transformer /starter/ regulator etc as required

OD43179/2022-2023:Supply and renewal of coupling bolt of 90 Hp motor

OD43273/2022-2023:Supply and renewal of coupling bush for 5hp motor pumpset

OD43274/2022-2023:Supply and renewl of coupling bush in position of 90 Hp motor

OD43349/2022-2023:Supply of cotton waste

OD43526/2022-2023:Supply of bearing grase

OD43527/2022-2023:Supply of gland packing

OD43583/2022-2023:Scrapping, cleaning and painting the Suction / Delivery side MS Pipe with Anticorrossive bituminous black paint over a coat of zinc rich primer

OD43649/2022-2023:Charges for dismantling the 100 HP ES. pump and taking out the impeller shaft assembly and placing to the floor of the pump house, dismantling the same parts by parts, cleaning the pump case, chamber case, reconditioning the damaged parts, attending minor works etc and assembling the impeller shaft assembly using fresh gland packing, gasket packing, grease, shellac etc. Refitting the pump using fresh bolt, nut etc.and making the same in good working condition etc complete.

OD43651/2022-2023:Supplying 200 A HRC fuse link or equivalent

OD136133/2022-2023:Charges for cleaning and removing unwanted plant growth from transformer yard and pump house.

PART II- Provision for work to be executed only under emergency

2.1.7:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.320 Amp TP&N

OD138606/2022-2023:Supply and installation of NO volt coil suitable for the oil immersed type starter-

SHIJU M.T

Bidder Name

SHIJU M.T

JOSE P C