Replacement of LT cable for DVOR Site and overhead line of street light to underground cable including improvement of illumination at CA Porbandar

Amount

Supply of following sizes of XLPE insulated PVC sheated, Aluminium conducter armoured electric cable of 1.1 KV grade confirming to IS 7098 PART-I with upto date amendment. (a) 3.5 x 185 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (a) Above 95 sq. mm and upto 185 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.laying at 0.50 mtr below ground level, refilling etc and disposal of extra stone/soil within 50 mtr lead etc complete as required. (a) 120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 3.5 x 185 sq.mm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 3.5 x 185 sq.mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supply of following sizes of XLPE insulated PVC sheated, Aluminium conducter armoured electric cable of 1.1 KV grade confirming to IS 7098 PART-I with upto date amendment. (a) 4 x 10 Sqmm

Laying of one number PVC insulated and PVC Sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (a) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (a) Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. (a) Upto 35 sq. mm (clamped with 1mm thick saddle)

Supply and erection of Street light Pole made up with 80 mm dia medium class GI Pipe of 6.00 mtr height having base plate of 200 x 200 mm size at bottom and suitable for holding 30W / 35W LED street light fitting at the top including painting with approved colour synthetic enamelled paint in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. complete as required.

Supplying and fixing of 32 mm dia X 2.00 meter long G.I. pipe (medium class) bracket for mounting of LED / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supply of pole mounted LED Street light fitting with minimum output of 2850 lumens and wattage not more than 30 W, for 230V Single Phase AC supply, 50Hz, PF>0.95, Life of fitting not less than 50000 hrs complete as required. Luminaire should have pressure die cast Alminium/standard alloy housing, dedicated street light secondary optics for better uniformity & spacing with surge protection system. Luminaire should have proper thermal management. Min IP protection should be IP65. The fixtures should comply with the specification available in respective Indian Standard Code for BIS. The fitting should have manufacturers trade mark/name engraved /embrossing on die cast housing of fitting with minimum 5 years warranty for complete luminaire including Driver & control gear etc comlpete as required.

ITC of LED fittings wattage not more than 30 W on existing pole with required clamp, fasteners and inter connection wires etc complete as required. (For item no. 7)

Supply, Installation Testing & Commissioning of dust & jet water proof, corrosion insulated Pole looping box of size 260mm x 210 mm x 116mm deep made of Thermoplastic Polycarbonete having 3 groomets, 2 glands and all accessories i/c provideing & fixing stud type nut driven 16A, 8way connector, seperator of suitable size to accommodate incoming and outgoing cables and fixing on existing street light pole with suitable clamps, providing 1 No “C” series SPN MCB of suitable rating in the box suitable for termination of 2 Nos 4 X 10 sq. mm MV cable, etc. complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 4 x 10 Sqmm cable.

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. (a) 40 mm dia (2 mtr length for loop in loop out cable)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing with the cable as required .

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. (a) 50 mm

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Dismantling of RCC pole / street light standard / strut embeded in cement concrete foundation and ramming the foundation including dismantling the existing foundation and making good the same complete etc. as required. etc. as required.

Supply of following sizes of XLPE insulated PVC sheated, Aluminium conducter armoured electric cable of 1.1 KV grade confirming to IS 7098 PART-I with upto date amendment. (a) 4 x 10 Sqmm

Laying of one number PVC insulated and PVC Sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (a) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (a) Upto 35 sq. mm

Erection of existing ight Pole made up with 40/50 mm dia medium class GI Pipe of upto 6.00 mtr height having including painting with approved colour synthetic enamelled paint in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. complete as required.

Supply of integral pole mounted decorative LED post top light fitting of 25 W, for 230V Single Phase AC supply, 50Hz, PF>0.95, Life of fitting not less than 50000 hrs complete as required. Luminaire should have proper thermal management & Minimum IP protection should be IP65. The fixtures should comply with the specification available in respective Indian Standard Code for BIS. The fitting should have manufacturers trade mark/name engraved /embrossing on die cast housing of fitting with minimum 5 years warranty for complete luminaire including Driver & control gear etc comlpete as required.

ITC of LED fittings wattage not more than 25 W on existing pole with required clamp, fasteners and inter connection wires etc complete as required. (For item no. 5)

Supply, Installation Testing & Commissioning of dust & jet water proof, corrosion insulated Pole looping box of size 260mm x 210 mm x 116mm deep made of Thermoplastic Polycarbonete having 3 groomets, 2 glands and all accessories i/c provideing & fixing stud type nut driven 16A, 8way connector, seperator of suitable size to accommodate incoming and outgoing cables and fixing on existing street light pole with suitable clamps, providing 1 No “C” series SPN MCB of suitable rating in the box suitable for termination of 2 Nos 4 X 10 sq. mm MV cable, etc. complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 4 x 10 Sqmm cable.

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. (a) 40 mm dia (2 mtr length for loop in loop out cable)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing with the cable as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. (a) 50 mm

Dismantling of RCC pole / street light standard / strut embeded in cement concrete foundation and ramming the foundation including dismantling the existing foundation and making good the same complete etc. as required. etc. as required.

CENTRE TAP ENGINEERING

Manish Electricals

ABHISHEK ASSOCIATES

Ganga Enterprises