Construction of Toilet blocks at Helipad exhibition ground, Sector-17, Gandhinagar

SCHEDULE -B, CIVIL & ELE.

Name of Work :- Construction of Toilet blocks at Helipad exhibition

ground, Sector-17,Gandhinagar

Name 8443 deposit work

Work Construction of Toilet blocks at Helipad exhibition ground, Sector-17,Gandhinagar (with electrical)

MEMORANDUM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT

Quantities Estimated rates Total Amount

Quantities Estimated rates Total Amount

Item Estimated According to

Items of works Unit

No but may be Estimated

more or less In Figure In words Quantities

Surface dressing of the ground including removing vegetation and in-equalities Twenty nine rupees

1 1,422.00 not exceeding 15 cm deep and disposal of rubbish,lead upto 50 m and Lift upto 29.23 and twenty three paise Sqm

1.5 m. All kind of Soil only

Excavation for foundation Upto 1.50 m depth including sorting out and stacking One hundred twenty

2 669.00 of the useful materials and disposing off the excavated stuff up to All lead. (A) 123.13 three rupees and Cmt

loose or soft soil. thirteen paise only

Excavation for foundation from depth 1.50 m to 3.00 m including sorting out One hundred seventy

3 176.00 and stacking of the useful materials and disposing off the excavated stuff up to 170.50 rupees and fifty paise Cmt

all lead. (B) Dense or Hard soil. only

Filling available excavated Earth (Excluding Rock) in trench plinthside of One hundred thirty six

4 581.00 foundation etc. in layer not exceeding 20 cm in depth consolidation each 136.92 rupees and ninety two Cmt

deposited layer by ramming and watering etc. complete. paise only

Four hundred eighty

Filling in plinth with sand under floors including watering, ramming

5 214.00 481.70 one rupees and Cmt

consolidating and dressing etc. complete.

seventy paise only

Two hundred seventy

Filling in foundation and plinth with murrum or selected soil in layers of 20 cm

6 214.00 277.14 seven rupees and Cmt

Thickness including watering, ramming and consolidating etc. complete.

fourteen paise only

Applying general insecticide pest control treatment to floors, cupboards etc

including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS

Ninety one rupees and

7 1,780.00 6313 part -II( (0.075% concentration by mass) is recommended 10.5ml chemical 91.63 Sqm

sixty three paise only

diluted with 5 liters of water application 0.5 litre chemical /Sqm of surface is

recommended as per I.S.

PCC M-150 : Providing and laying controlled cement concrete M-150 and curing

Four thousand forty

complete including the cost of form work but excluding the cost of

8 172.00 4049.22 nine rupees and Cmt

reinforcement for reinforced concrete work in P.C.C below foundation footings,

twenty two paise only

base of columns and mass concrete.

Foundation M-250 : Providing and laying controlled cement concrete M-250 Four thousand four

and curing complete including the cost of form work but excluding the cost of hundred nineteen

reinforcement for reinforced concrete work in foundation footings, base of rupees and seventy

columns and mass concrete. paise only

Column M-250 : Providing and laying controlled cement concrete M-250 for Seven thousand five

curing complete including cost of formwork but excluding the cost of hundred forty two

reinforcement for reinforced concrete work in Columns, pillars, posts and rupees and thirty one

struts For All Floor Level. paise only

Four thousand six

Grade Slab M-200 : Providing and lying controlled concrete M-200 and curing

hundred fifty six

11 72.00 complete including cost of form work but excl. reinforcement for reinforced 4656.54 Cmt

rupees and fifty four

concrete work in Grade Slabs

Six thousand four

Slab M-250 : Providing and lying controlled concrete M-250 and curing

hundred twelve rupees

12 171.00 complete including cost of form work but excl. reinforcement for reinforced 6412.98 Cmt

and ninety eight paise

concrete work in Slabs For All Floor Level.

Five thousand eight

Beam M-250 : Providing and lying controlled concrete M-250 and curing

hundred seventy five

13 233.00 complete including cost of form work but excl. reinforcement for reinforced 5875.53 Cmt

rupees and fifty three

concrete work in Plinth Beam & Beams For All Floor Level.

Seven thousand seven

Lintel M-250 : Providing and lying controlled concrete M-250 and curing

hundred sixty two

14 5.00 complete including cost of form work but excl. reinforcement for reinforced 7762.52 Cmt

rupees and fifty two

concrete work in Lintel For All Floor Level.

Six thousand six

Chajja M-25 : Providing and lying controlled concrete M-250 and curing

hundred sixty four

15 6.00 complete including cost of form work but excl. reinforcement for reinforced 6664.14 Cmt

rupees and fourteen

concrete work in Chajjas For All Floor Level.

Six thousand four

Sill/Coping M-250 : Providing and lying controlled concrete M-250 and curing

hundred two rupees

16 11.00 complete including cost of form work but excl. reinforcement for reinforced 6402.43 Cmt

and forty three paise

concrete work in Sill / Coping For All Floor Level.

RCC wall M-250 : Providing and lying controlled concrete M-250 and curing Eight thousand ten

17 33.00 complete including cost of form work but excl. reinforcement for reinforced 8010.60 rupees and sixty paise Cmt

concrete work in RCC wall For All Floor Level. only

Providing TMT Bar FE 550D reinforcement for R.C.C. work including bending, Ninety four rupees and

binding and placing in position complete upto floor two level. ninety nine paise only

Four thousand two

Brick work using common burnt clay conventional building bricks having

hundred fourteen

19 122.00 crushing strength not less than 35 Kg/Sqm. in Foundation and Plinth in cement 4214.09 Cmt

rupees and nine paise

mortar 1:6 ( 1 cement : 6 fine sand ) including curing etc. complete.

Four thousand five

Brick work using common burnt clay conventional building bricks having

hundred two rupees

20 496.00 crushing strength not less than 35 Kg/sqcm. in Super structure for All floors in 4502.81 Cmt

and eighty one paise

cement mortar 1:6 ( 1 cement : 6 fine sand ) including curing etc. complete.

Half brick masonry in common brunt clay building bricks having crushing Six hundred eighty five

21 570.00 strength not less than 35Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement : 4 -coarse 685.79 rupees and seventy Sqm

sand ) in foundation and plinth (B) Conventional nine paise only

Providing and laying broken china mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or Seven hundred seventy

22 1,216.00 slope and to be tempered to bring mortar creme out upto surface using white 779.70 nine rupees and Smt

cement including rounding off junctions and extending them upto 15 cm along seventy paise only

the wall,clearing with water and oxalic acid etc. as directed.

Window (Two Track) : Providing and fixing of Domal series Two Track Partly Fix

and Partly Sliding Window with colour anodized Section Frame of size 82.5 x

x 1.7 mm @ 1.947 Kg / Rmt and Three Track Bottom/Top of size 80 x 45 x 1.5 Four thousand eight

mm @ 1.762 Kg / Rmt and Slidding Shutter of size 65 x 27 x 1.5 mm @ 0.951 Kg hundred sixteen

/ Rmt with 5mm thick Coated Glass with Rubber gasket with help of Glazing rupees and fifty nine

Clip of size 26.7 x 15 x 1.2 mm and Inter clip using with of size 38.7 x 28.5 x 1.4 paise only

mm and using hardware material, clot, bearing, lock and Labour etc. complete

as approved by Engineer In Charge.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60 mm thick with grade of concrete M300 pnumatic compressed / vibrated Seven hundred six

24 34.00 mechanically and as per approved design Confirming to IS 15658 : 2006 706.90 rupees and ninety Sqm

including 35 mm Sand layer for levelling and filling the joint with sand in proper paise only

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of One hundred eighty

25 3,148.00 single or half brick walls for interior plastering upto floor two level and finished 185.41 five rupees and forty Sqm

even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) one paise only

Providing 10 mm thick Mala cement plaster with 1x1 cm grooves in single coat

One hundred sixty one

on brick/concrete wall/ceiling for interior plastering upto floor two level

26 1,268.00 161.36 rupees and thirty six Sqm

finished even and smooth including scaffolding, curing etc. complete. In Cement

mortar 1:3(1 cement : 3 fine sand) for all floors.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly Forty rupees and fifty

brushing the surface free from mortar dropping and other foreign matter and nine paise only

sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and

Eighty three rupees

manufacture on undecorated wall surface to give an even shade including

28 4,416.00 83.18 and eighteen paise Sqm

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

One hundred twenty

coats) including Primer to give an required shape even shade after thoroughly

29 2,432.00 120.26 rupees and twenty six Sqm

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

Providing 20 mm thick double coat mala cement plaster on interior brick /

concrete work for plastering comprising of base coat of 12 mm thick cement Two hundred eighty six

30 2,432.00 plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 286.10 rupees and ten paise Sqm

mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished only

with trovel including scaffolding curing etc. complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

Three hundred seventy

concrete block 30cm length,30cm height and 15cm thick of M250 grade concret

31 295.00 374.92 four rupees and ninety Rmt

as per approved design and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and fixing granite slab of 18mm thickness for stone jamb on wall,

framing etc. on the base of cement mortar 1:3 (1-cement : 3-sand) on new Two thousand nine

surface or fixing on existing location by adhesive material including dismentaling hundred fifty six

of existing location and jointed with color cement slurry including finised with rupees and eleven

flush pointing & cleaning the surface etc. To be laid or fixed as per the direction paise only

of the Engineer-in-Charge

Providing and Fixing fully adjustable, alluminium colour anodized glazed

Two thousand five

louvered ventilator using main frame of section No 21458 size 95 mm x

hundred twenty seven

33 22.00 mm x 0.95 mm having weight of 0.738 kg/m, using 5 mm thick 100 mm wide 2527.96 Smt

rupees and ninety six

transparent glass blade louver having dual controls i.e. two right and two left

handles including powder coating to metal work etc. complete.

Vitrified Flooring : Providing and laying Lapato / Glossy/Matt/Rustic finish

Double charged antiskid Vitrified tiles flooring using minimum 10 mm thick

tiles as per approved make list or selected by Architect , tile size (1200 mm X

One thousand nine

600 mm, 800 x 800,900 x900, 600x600mm) including preparing base for

hundred thirty four

34 1,158.00 leveling with 20mm thick cement mortar 1:6 (1 cement : 6 coarse sand ) and 1934.38 Sqm

rupees and thirty eight

jointed with 3mm to 5mm thick laticrete grouting of approved shade and

colour in proper line and level as per detailed drawing / instruction and

approval by architect.The rate shall be inclusive of protecting the flooring by

plaster of Paris and plastic and/or bubble top sheets. (At all floor area).

One thousand one

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps

hundred fourteen

35 1,069.00 and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 1114.09 Sqm

rupees and nine paise

jointed with white cement slurry

Providing and laying tactile tile (for vision impaired persons as per standards) of

size 300x300x9.8mm having with water absorption less than 0.5% and

One thousand seven

conforming to IS: 15622 of all colours and shades in for outdoor floors laid on

hundred twenty six

36 24.00 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes 1726.93 Sqm

rupees and ninety

& patterns including grouting the 1061 sub head : 16- road work joints with

three paise only

white cement mixed with matching pigments etc. complete All the work shall be

done as per instruction given by EIC

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections

using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI

suspender channel of size 25 mm x 3 mm with intermediate channel og size

mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 Six hundred six rupees

37 48.00 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm 606.95 and ninety five paise Sqm

x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, only

anchor fastener, scoch bolt connecting cleat, joining compound top coat on

ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed

False ceiling of Aerolight light weight Calcium Silicate tiles : Providing and fixing

False ceiling of Aerolight light weight Calcium Silicate tiles Tegular Edge of size

595 x 595 x 15mm densified edge, having 100% humidity resistance and

incombustible as per BS 476 part - 4 with thermal conductivity of 0.043 W/m0

kC, with NRC of .50 and approved surface design to be placed in the Grid

suspended Ceiling with border of Gypsum sheet . Grid system made of

Galvanised steel Section with main ''T'' runner 3.6 mt long with size 38 x 24 x Seven hundred eighty

38 1,216.00 0.30 mm spaced at 1200mm c/c and cross "T" of 1.2 mt long with size 24 x 24x 786.84 six rupees and eighty Sqm

0.30 mm spaced between main ''T" at 600mm c/c to form a grod of 600 x 1200 four paise only

mm and secondary cross "T" of length 600 mm to be inter locked at middle of

the 600 x 1200 mm panel to form a grid of 600 x 600 mm. The wall angle of size

24x 24x 0.55 mm to be fixed all around the perimeter of the wall. The main "T"

runner to be suspended from the ceiling using GI sloted cleats and 50mm long

dash fasteners,4mm GI adjustable rods with galvanised level clips with all labour

and material and as directed by Engineer incharge.

Providing and fixing M.S. grills of required pattern to wooden frames of One hundred six

39 790.00 windows etc. with M.S. flats at required spacings and frame alround, square or 106.23 rupees and twenty Kg

round bars with round headed bolts and nuts or by screws (A) Plain Grill. three paise only

Flush Door With Both Side Laminate - Providing and fixing 35 mm thick shutters Five thousand nine

for Doors with Both side Laminate including Indian teak Wood Frame including hundred ten rupees

black enamelled iron oxidized fixtures and fastenings and necessary hardware and fourteen paise

such as hinges, door stopper, door closer, handle, mortice lock etc, complete. only

MS FABRICATION WORK :Structural steel work in riveted, bolted or welded in

built up sections, trusses and framed work including supplying, fabricating,

cutting, assembling, hoisting and fixing in position at all heights of all shapes and

size with all leads and lifts as per latest IS 4923, IS 1161, IS 806for the work of

Railing, Handrail, duct platform, ladder, grill, gate, framework of GRC Jali and

similar works etc. including cutting and welding the members as per detailed

drawing and design. The rate shall include sand blasting, degreasing (wet

cleaning) & preparation of rust free surface manually or mechanically, metal

putty to make the surface even and smooth, 1coat of epoxy primer and 2 top

coats of Metal PU Paint of having DFT 40 to 50 micron of approved make and

shade as per manufacture’s specification over all the surfaces of the steel Seventy six rupees and

sections. (Only standard measurements will be paid for as actual cut length thirty two paise only

used at site). Shop drawings for the connection details shall be prepared by the

contractor for the approval of the architect.Rate shall be inclusive of cutting,

wastage, welding, bending (shop at site), and bolting wherever necessary, in

position welding of required length, grinding, finishing edges, and filling the

welded spots with metal putty. Rate shall be inclusive of 5 years guarantee

against corrosion.The fabrication work shall start after approval of finished

sample as per drawing by Architect.Rolled steel sections, bars, RHS, SHS, tubular

hollow sections, plate, bolt etc. as approved by engineer in charge & as per

drawing. Rates are inclusive of providing fixing and dismentalling scafollding and

work for any height.

S.S Railing : Providing and Fixing S.S. Railing for staircase made from S.S

Grade, 50mm Top hand rail, 32mm Vertical Balustrade fixing at 1.2 mt C/C with Three thousand seven

anchor fastner 75 mm dia 8 mm thick flange and shoe cap, with 3 nos of 16 mm hundred sixty seven

Horizontal pipe fitting with L and Key ,modular knob system. Balustrade top rupees and forty three

modular "T" fixing support to 50 mm hand rail and turning fixed with modular paise only

bend. including accessories as per detailed drawing as directed etc. complete.

Wash basin table top counter - Toilet / Wash Area (Counter width- 600mm ) :

Providing & fixing two layers of wash basin counter,first layer using 25mm thick

Kotastone of approved shade and second layer using approved shade and

sample of Mirror finish Granite (Of Texture, shed, Colour and pattern as

Three thousand three

approved by EIC ), joined together with 1:4 Cement mortar beding 30mm /

hundred thirty one

43 83.00 approved tile adhesive , to true plane & level or to slopes,or close jointed with 3331.67 Sqm

rupees and sixty seven

cement slurry with pigment of matching shade and colour and finishing with the

same, cutting kotah & tile as per required shape & size to fit Wash basin,& 3" to

9" facia with moulding, nosing, chamfered front edges, fixing, disposal of

debris etc. finished as per design in detail drawing and instruction of

Architec/EIC.The sample mock shall be approved from Architect/EIC.

Painting three coats (one coat of priming coat + two coats of enamel paint) on

One hundred twenty

new steel and other metal surface with enamel paint including preparing the

44 54.00 128.62 eight rupees and sixty Smt

surface by throughly cleaning, oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand paper etc. comp.

I.P.S Flooring: Providing and laying cement concrete flooring 1:2:4 (1-cement : 2- Three hundred sixty

45 497.00 coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer 369.13 nine rupees and Smt

and finished with a floating coat of neat cement. (B)50mm thick. thirteen paise only

Water Proofing Treatment in Sunken Portion of WCs & Bathroom: Providing and

laying Water proofing treatment in sunken portion of WCS, Bathrooms etc. by

applying cement slurry mixed with water proofing cement compound consisting

of applying: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water

Five hundred twenty

proofing cement compound @0.253 kg/sqm. This layer will be allowed to air

46 497.00 528.15 eight rupees and Smt

cure for 4 hours . (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed

fifteen paise only

with water proofing cement compound @ 0.126 kg/sqm.This layer will be

allowed to air cure for 4 hours followed with water curing for48 hours. The rate

includes preparation of surface, treatment and sealing of all joints, corners of

pipes and masonry with polymer mixed slurry.

Waterproofing treatment on Terrace: Providing and applying Fibre reinforced

Elestomeric liquid Water proofing membrane with resilient Acrylic polymers

having Sun Reflectivity Index (SRI) of 105 on Top of concrete roof in top of

concrete in three coats @ 10.76 litre/10 sq.m. One coat of self-priming of

Four hundred eighty

Elestomeric water proofing liquid (delution with water in the ratio of 3:1) and

47 1,212.00 481.97 one rupees and ninety Smt

two coats of undiluted elestomeric waterproofing liquid (dry film thickness of

seven paise only

complete application/system not less than 500 microns). The operation shall be

carried out after scraping and properly cleaning the surface to remove loose

particles with wire brushes , complete in all respect as per the direction of

Engineer-in-charge.

Providing and laying polished Kota stone slab flooring over 20mm (Average)

One thousand nineteen

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid

48 222.00 1019.39 rupees and thirty nine Smt

over and jointed with grey cement slurry including rubbing and polishing etc.

complete. (B) 25 mm thick

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

Two hundred eight

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

49 170.00 208.80 rupees and eighty Rmt

following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

Two hundred fifty

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

50 250.00 253.82 three rupees and Rmt

following dia. nominal bore tube fittings and clamps including making good the

eighty two paise only

wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

Three hundred thirty

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

51 80.00 338.24 eight rupees and Rmt

following dia. nominal bore tube fittings and clamps including making good the

twenty four paise only

wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

Four hundred forty

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

52 280.00 447.72 seven rupees and Rmt

following dia. nominal bore tube fittings and clamps including making good the

seventy two paise only

wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

Six hundred sixty

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

53 150.00 660.58 rupees and fifty eight Rmt

following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [F] 50mm.

Providing laying and jointing in PVC SWR pipes IS 13592 for Drain - 75 mm dia

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

One hundred forty four

wall with the help of clamp at every two metre C/C or shall be concelled as

54 150.00 144.40 rupees and forty paise Rmt

directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of al`l materials.[D] 75mm.

To be fitted as per the directions of Engineer-in-Charge.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type

B) conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber Eight hundred seventy

55 300.00 lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm 876.90 six rupees and ninety Rmt

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center paise only

or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type

B) conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber Eight hundred thirty

56 150.00 lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm 834.38 four rupees and thirty Rmt

diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center eight paise only

or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing, fixing, jointing and testing in position the following PVC pipes

conforming to IS 4985 of 6 kg/sqcm pressure rating including all fittings, solvent

weld joints, testing complete for drainage system cut to required length to be Sixty three rupees and

laid under floor including covering all around with cement concrete and making sixty eight paise only

good the same complete as required.

40mm OD (6 kg pressure)

Providing, fixing, jointing and testing in position the following PVC pipes

conforming to IS 4985 of 6 kg/sqcm pressure rating including all fittings, solvent

weld joints, testing complete for drainage system cut to required length to be Eighty four rupees and

laid under floor including covering all around with cement concrete and making thirty six paise only

good the same complete as required.

50mm OD (6 kg pressure)

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

Five hundred ninety

with jali of the following nominal diameter of self cleansing design with C.I

59 80.00 599.64 nine rupees and sixty Each

scread down or hinged grating including the cost of cutting and making good

four paise only

Providing and fixing 1 mm thick stainless steel grating with frame for floor traps Seven hundred fifty

60 80.00 or drains of required pattern including cutting and making good the floors 757.30 seven rupees and thirty Each

complete. 125mm dia. paise only

Two thousand ninety

Providing and fixing Brass ball Handle Valve of standard compny like Zoloto or

61 20.00 2090.70 rupees and seventy Each

equivelent and as per directed by engineer incharge. (A) 25mm dia.

Four thousand two

Providing and fixing Brass ball Handle Valve of standard compny like Zoloto or hundred seventy four

equivelent and as per directed by engineer incharge. (A) 40mm dia. rupees and thirty two

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating

Four thousand sixty

with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

63 20.00 4065.25 five rupees and twenty Each

washers, gaskets conforming to IS 13095 of following sizes as required : 50 mm

five paise only

Providing and fixing Wall mounted, white vitreous china single piece, double

traps syphonic water closet of approved brand/make, shape, size and pattern Nineteen thousand five

including integrated white vitreous china cistern of capacity 10 litres with dual hundred seventy one

flushing system, including all fittings and fixtures with seat cover, cistern fittings, rupees and twenty

nuts, bolts and gasket etc including making connection with the existing P/S eight paise only

trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size Nine hundred eighty

65 20.00 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid 982.13 two rupees and Each

for separately) (A) Vitreous China.(I) Long pattern = White colour thirteen paise only

Providing and fixing 100mm size P or S trap for water closet squatting pan Three hundred thirty

66 20.00 including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1- 330.71 rupees and seventy Each

Cement : 1-Fine sand)(A) Vitreous China one paise only

Providing and fixing white vitreous china battery based infrared sensor

Nineteen thousand one

operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing

hundred sixty four

67 70.00 with water (250 ml & 500 ml consumption), having water inlet from back side, 19164.75 Each

rupees and seventy

including fixing to wall with suitable brackets all as per manufacturers

five paise only

specification and direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, Three thousand three

32 mm C.P. brass waste of standard pattern, including painting of fittings and hundred forty five

brackets, cutting and making good the walls wherever require: White Vitreous rupees and twelve

China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps paise only

One thousand nine

Providing & Fixing of Grab bar 600 mm of non slipping grip as per standard

hundred forty five

69 10.00 specification of use in disabled toilet complete with brackets suitable for wall 1945.51 Set

rupees and fifty one

installation as per approved sample complete in all respect.

One thousand six

Providing and fixing CP Health faucet to european type W.C. of approved quality hundred seventy two

and make as approved by engineer in charge. rupees and fifty six

Two thousand fifty five

Providing and fixing C.P. brass Two way bib cock of approved quality conforming

71 130.00 2055.86 rupees and eighty six Each

Six hundred ninety six

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

72 140.00 696.90 rupees and ninety Each

approved quality conforming to IS:8931 15mm nominal bore

Four hundred twenty

73 130.00 Providing and fixing toilet paper holder.(A) C.P. Brass 427.99 seven rupees and Each

ninety nine paise only

Six hundred sixteen

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed

74 140.00 616.42 rupees and forty two Each

to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Three thousand one

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

hundred eighty two

75 71.00 approved quality) complete with 6 mm thick hard board ground fixed to 3182.99 Smt

rupees and ninety nine

wooden cleats with C.P. brass screws and washers complete.

One thousand nine

Providing and fixing CP Brass liquid soap container of standard shape with hundred sixteen

bracket of the same materials with snap fittings of approved quality and colour. rupees and forty eight

One thousand three

Providing and fixing CP Brass 32mm size bottle trap of approved quality & make

77 80.00 1300.88 hundred rupees and Each

and as per the direction of engineer in charge.

eighty eight paise only

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved Ninety four rupees and

make and quality as per direction of Engineer-in-charge. eight paise only

One hundred twenty

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm seven rupees and

length , 15 mm nominal bore seventy seven paise

One thousand five

Providing and fixing CP Brass soap Dish Holder with concealed fitting hundred sixty eight

arrangements, of approved quality and colour rupees and three paise

Four thousand two

Providing and fixing CP Brass towel rail complete with brackets with CP brass hundred ninety seven

screws with concealed fittings arrangement of approved quality and colour. rupees and fifty five

Urinal Partition Providing Febricating and Fixing 10mm thick ANEL finish Urinal

Eight thousand four

partition(560X2400) with 20mmx4mm metal frame in mate finish with all

hundred seventy eight

82 60.00 nessery fittings and hardwear etc. as per design and drawing all complete as 8478.95 Each

rupees and ninety five

per details, Specifications and Schedules and drawing. or as per directed by

project incharge.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe

Four hundred sixty four

etc. and repairing the hole after insertion of drain pipe etc. with cement

83 30.00 464.60 rupees and sixty paise Each

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size), including finishing complete so as to make it leak proof.

Providing and fixing PVC SWR Vent Cowl 110 mm dia with mesh at the exterior

surface to Avoid Birds Entering For Bathroom/Office/Kitchen Twenty six rupees and

Ventilation/Exhaust Fan of approved company at the output for the toilets. It four paise only

should be assembled and fixed as per the direction of the Engineer-in-Charge.

Fourteen thousand

Supply installation, testing and commissioning of Hand drier ,Operating power

85 50.00 14025.11 twenty five rupees and Each

supply 230 + 10% V AC,50 Hz,1 PH

eleven paise only

RESTROOM CUBICALS - Providing & fixing Greenlam Sturdo Aster Collection-

Orion Restroom Cubicle (of following standard dimension which includes

600mm door size width) self-supporting 12mm thick compact laminates made

out of, urea free, thermosetting phenolic resins treated Kraft papers as core

material and Amino plastic resin treated decor papers on the finish surface,

conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-

2005 quality standards with Antivirus, Antibacterial and Antifungal properties

(conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards

respectively) to fulfil the applicable requirements of indoor air quality

certifications for Greenguard-Gold standards.

This also includes providing and fixing in position necessary hardware made out

of Stainless steel (Grade 316) as per manufacturer’s specifications & Architects Nineteen thousand

instructions like (1) Door Knob, (2) Spring Loaded Hinges (3) Slide Bolt with three hundred sixty

Occupancy indicators, (4) Coat hook (5) U-Channels, (6) Adjustable foot ( Mid eight rupees and one

Panel Mounted or Divider Setback Leg) (7) Top rail with T and L Corner paisa only

conntector (8) Rubber noise deafening tape, (9) Screws & wall Plugs.

The top fitting should consists brushed finish round top rail which will get fixed

with pilasters with panel tube holder, 'L' corner bend (connected with top rail)

will be used on the corner of cubicle in absence of brick wall and 'T' Connector

in T junctions, Wall Bracket fixing is used only on the wall which will hold the

All screws also will of 316 Grade in stainless steel. All pilasters are supported by

Metal Leg [ Straight Leg made out either only SS Brush finish or With SS with

black powder coated / Set Back Leg with Zinc casted black powder coated ] . The

base of the stainless steel bottom will be anchored to the floor with a clearance

height upto 150mm.

Providing erecting and fixing Seven layer coated PVC (ISI) water tank of required Eleven rupees and

capacity with all necessary fittings and connection etc. complete on terrace. twenty nine paise only

One thousand two

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

hundred forty six

88 20.00 water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard 1246.92 Each

rupees and ninety two

weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1 cement :2-coarse sand

: 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix

(1-cement : 3 coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm

thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a

floating coat of neat cement and making channels in cement concrete 1:2:4 mix

Nineteen thousand

(1-Cement :2 Coarse sand :4-stone aggregate 20mm nominal size) finished

three hundred forty

89 10.00 smooth complete including curing and festing (i) Inside size 900mm x 1200mm 19349.63 Each

nine rupees and sixty

and 1.5M. deep including C.I. cover with frame size 560mm diameter total

three paise only

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter

Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35Kg/ Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

Seven thousand one

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

hundred eighty rupees

90 10.00 Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand 7180.44 Each

and forty four paise

:4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

Providing and fixing in position storage unit of any height and depth (450/600

mm), fabricated from 18/19 mm BWR grade calibrated plywood of approved

make, with shutters made from 12 mm plywood or 6 mm thick glass shutters

(as specified), complete with openable arrangement. All external and internal Six thousand eight

91 33.00 surfaces shall be finished with 1 mm laminate, with batten patti on exposed 6850.03 hundred fifty rupees Smt

edges finished in PU polish and 2 mm PVC edge banding. The unit shall include and three paise only

soft-close concealed hinges, soft-close drawer channels (35 kg capacity), locks,

and all necessary hardware, complete as per approved drawings and

instructions of Engineer-in-Charge/Architect.

Signage :Manufacturing, supply, arrangement and keeping in good condition

until project completion SS/Wooden/MDF signage using SS

grade/Plywood/MDF material brush finish 1.5mm thick sheet with letter,

numbers, graphic, symbol etc made by acid etching process with duco paint/

Sixteen thousand two

powder coating as per drawings and instruction of the architect. All required

92 7.00 16261.00 hundred sixty one Smt

CNC cutting/ laser cutting shall be carried out as per drawing. The plate shall be

fixed on brick/ RCC wall/ ply/ cement board/ furniture/ door with the necessary

fixing hardware like SS stud, fastner, self adhesive double side tape etc.

complete for all floors and all height. The rate shall be inclusive of all material,

laour, hardware scaffolding etc.

Providing and fixing of Main Enterance Board Veneer Finish madeup of 18mm

thick BWR plywwod of standard make like Century, Greenlam, Marine,

Eleven thousand nine

Greenply, Saint-Gobain, Sainik etc with at back, 3 to 5 mm thick veneer sheet

hundred eighty one

93 6.00 including PU Polish, batten border and name plate madeup of S.S. Grage 304 11981.86 Smt

rupees and eighty six

having thickness upto 2.5mm having size as per requirement including

computerized printing in SS plate to board complete and shall be approved by

Engineer In charge/Architect.

Electrical work

Providing & Erecting Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push & accessories and earth Rupees Five Hundred

94 680.00 continuity of following type, erected on PVC / Metallic/Wooden box, single 582.77 Eighty Two And Paise Pt.

mounting base frame covered with textured/metallic/white front plate Seventy Seven Only

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light Rupees Two Hundred

95 600.00 with accessories erected on Metal / PVC / wooden box covered with 3 mm 200.99 And Paise Ninety Nine Pt.

thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with Only

necessary Lamp holder / ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

Providing & Erecting Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single Rupees Three Hundred

mounting base frame covered with textured /metallic/white front plate Nine And Paise Six Only

modules erected on / in wall / ceiling with following type accessories Cat. III

Providing & Erecting Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base frame covered Rupees One Hundred

97 220.00 with textured / metallic/white front plate , modules erected with necessary 151.50 Fifty One And Paise Nos

connections as per site situation directed by Engineer In charge. (1)One No. SP 6 Fifty Only

Providing & Erecting Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base frame covered Rupees One Hundred

98 220.00 with textured / metallic/white front plate , modules erected with necessary 151.50 Fifty One And Paise Nos

connections as per site situation directed by Engineer In charge. (2) One No 5 Fifty Only

pin plug Cat.III

Providing & Erecting Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base frame covered Rupees Twenty Five

99 160.00 with textured / metallic/white front plate , modules erected with necessary 25.25 And Paise Twenty Five Nos

connections as per site situation directed by Engineer In charge. (7) Blank Plate Only

Providing & Erecting Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base frame covered Rupees One Hundred

100 220.00 with textured / metallic/white front plate , modules erected with necessary 180.79 Eighty And Paise Nos.

connections as per site situation directed by Engineer In charge. (9) 16 Amp. SP Seventy Nine Only

one way switch Cat.III

Providing & Erecting Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting base frame covered Rupees One Hundred

101 220.00 with textured / metallic/white front plate , modules erected with necessary 199.98 Ninety Nine And Paise Nos.

connections as per site situation directed by Engineer In charge. (10) 6/16Amp. Ninety Eight Only

Universal socket Cat.III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings Rupees Fifty Four And

& Junction boxes fixed with adhesive solution & Clamps with following dia of Paise Fifty Four Only

pipes, in approved manner as directed.(c) 32 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected Rupees One Hundred

103 5,500.00 concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS 104.03 Four And Paise Three Mtr

PVC insulated stranded wire of green colour for earth continuity of following Only

size.(A) with medium class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on Rupees One Hundred

104 3,250.00 wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded 140.39 Forty And Paise Thirty Mtr

wire of green colour for earth continuity of following size(A) with medium class Nine Only

Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on Rupees One Hundred

105 300.00 wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded 184.83 Eighty Four And Paise Mtr

wire of green colour for earth continuity of following size(A) with medium class Eighty Three Only

Rigid PVC pipe and accessories.(b) 2 wire 6 sq. mm

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size Rupees Seventy And

(Specifically for control panel, relays, power switchgears, motor starters & Paise Seventy Only

control wiring) with required size of copper lugs, nuts and bolts if required.

(e) One wire 6.00 sq. mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Rupees Four Hundred

CCT 3000 K to 6500K,

Twenty Seven And

107 320.00 Luminaire efficacy> 85 lumens/watt , 427.23 Nos

Paise Twenty Three

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Rupees Eight Hundred

108 370.00 Luminaire efficacy> 85 lumens/watt , 859.51 Fifty Nine And Paise Nos

LED driver efficiency > 85 % Fifty One Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(I) Adjustable spot light with COB led having aluminium reflector of following

(i) 8 Watts, Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, Rupees One Thousand

CCT 3000 K to 6500K, Three Hundred Sixty

Luminaire efficacy> 85 lumens/watt , Seven And Paise Fifty

LED driver efficiency > 85 % Four Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(F) Spot Light 425 Lumens, Surge-2kV

(ii) 8 to 11 Watts Cat-lll

Providing, supplying, installing, testing and commissioning of 10 W LED

integrated two-way wall washer luminaire with die-cast aluminium body, black Rupees Four Thousand

finish, 220–240 V AC, Warm White, minimum 950 lumens, complete with Two Hundred Forty

integral LED driver, mounting accessories, wiring and all necessary connections, One And Paise Eighty

including labour and incidental works, complete as directed by Engineer-in- Only

Providing and fixing of Philips Profile shine LED Strip Light (45W) or approved

equivalent, complete with extruded aluminium profile (section) for heat

dissipation and opal diffuser cover for uniform, glare-free illumination. The

fitting shall be suitable for surface/recessed/suspended installation as per

The luminaire shall have System Power 45 Watt per meters, Luminous FLux Rupees Nine Hundred

111 480.00 4500 Lumens per Metre, 110 degree Beam Angle, CCT of 3000K/4000K/6500K 944.35 Forty Four And Paise RMT

(as specified), CRI ≥80, and minimum 50,000 burning hours. The system shall be Thirty Five Only

compatible with LED strip light suitable driver.

The item includes supply and installation of aluminium profile, diffuser, end

caps, mounting accessories, wiring, connection to power supply, testing, and

commissioning complete as directed by the Engineer-in-charge. (IS 10322, BIS,

RoHS compliant Fixtures )

Providing, supplying and installing Futura GARIS- decorative LED hanging light of

28.8W, comprising high-quality LED module, aluminium fixture body with

Rupees Nine Thousand

suitable surface finish and diffuser, CRI ≥90, CCT 3000K/4000K, complete with

112 110.00 9665.70 Six Hundred Sixty Five Nos

integral/external LED driver, suspension kit, ceiling mounting canopy,

And Paise Seventy Only

suspension cables/rods and all necessary accessories for a complete and

functional installation.

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable Rupees One Hundred

113 80.00 to operate on 240 V A.C. system and having breaking capacity 10 KA to be 123.22 Twenty Three And Nos

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Paise Twenty Two Only

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) Rupees Three Hundred

114 30.00 having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 325.22 Twenty Five And Paise Nos

following capacity (B) 40 Amp. Cat.III Twenty Two Only

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Rupees One Thousand

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate Four Hundred Ninety

nos. of MCBs.(The DBs should be used of same company of MCB to be used) Two And Paise Seventy

suitable for (A) single phase incoming and horizontal single phase outgoing (b) Eight Only

sheet steel double door (IP-43) (iv)12 way

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and Rupees Two Thousand

suitable for operation on single phase 240 V,50Hz. having characteristic of quick Four Hundred Fifty

action & tripping with all advance feature & do not incorporate any electronic Eight And Paise Thirty

component. for following Max. rating erected as directed (ii) 40Amps. DP Cat. Four Only

Rupees Seventy Seven

117 30.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 77.77 And Paise Seventy Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200- 250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

Rupees Four Thousand

suitable for following type of applications with chamber and heavy duty

Five Hundred Ninety

118 10.00 cover.(approved make OEM has to submit test certificate) & having back filling 4591.46 Nos

One And Paise Forty Six

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be

capable to retainmoisture for long time Necessary test report must be

submitted by agency.(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Supplying & erecting FRLS-XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable Rupees Sixty Four And

1.1 kV.grade to be erected as directed of following size. (B) 2 core 4 Sq. mm Paise Sixty Four Only

Rupees One Thousand

Supplying & erecting approved make low noise decorative exhaust fan having

Three Hundred Sixty

120 20.00 square frame ABS body with inbuilt lowers & square frame.200mm with 1350 1366.53 Nos

Six And Paise Fifty

Supplying & erecting approved make SMC press moulded composite FRP. loop-

in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement Rupees Eight Hundred

121 10.00 having locking arrangements with mounting clamp with nuts, bolts & washers 898.90 Ninety Eight And Paise Nos

suitable for erection on pole with cable clamps& earth bolt of following size of Ninety Only

(A) 300mm x 200mm x 100mm [deep]

Rupees One Thousand

Supplying and erecting HYLAM sheet on existing angle iron frame.for following

One Hundred Fifty Six

122 10.00 thickness 1156.45 Sq Mtr

And Paise Forty Five

Supplying & erecting approved make Digital time switch having lithium cell

years operative and operate battery backup 1 channel day clock with 14 Rupees Three

memory programme, suitable to operate on 240V + 5%, 16A with, floating Thousand One

123 10.00 contacts Minimum switching setup time 1 minimum & LCD display. Also 3168.37 Hundred Sixty Eight Nos

comprised permanent ON/OFF switching. Programming switches & housed in And Paise Thirty Seven

fire proof thermoplastic enclosure & transparent cover erected as required with Only

necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete Rupees Seven Hundred

124 10.00 erected as per direction Cat III 796.89 Ninety Six And Paise Nos

(A) 2 Pole 250V 12 Amp. Eighty Nine Only

Four crore twenty five lakh ninety one thousand six hundred seventy rupees and eighty four paise only

I / We am / willing to carry out the work at __________ above / below __________ percentage (should be written in figures and words) above / below the

estimated amount mentioned above. Amount of my/our tender works out as under.

Estimated Amount put to Estimated Amount put to

Deduct _________ % Below. Add _________ % Above.

Notes For Civil Work :-

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:

4 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Dated signature of

Capital Project Sub Division 03 Capital Project Division

Gandhinagar Gandhinagar