SPECIAL REPAIR TO ROOF AND CERTAIN REPAIRS TO BLDG NO M 9 PROVN OF STAINLESS STEEL HAND RAIL OF FOOTPATH FROM 3 TB GATE TO 76 INF BDE SIG COY AND PROVN OF FOOTPATH WITH INTERLOCKING TILES AT T COY AT 3 TB 1 EME CENTRE GATE TO 76 INF BDE SIG COY UNDE

Amount

Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc., complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc complete incl removal of demolished material to a distance complete all as specified and as directed.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc., complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule

Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule

Supply only water proofing compound complete all as specified and as directed.

M & L for providing water proofing treatment with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric ( weight not less than 150gm/Sqm) applied on one coat of oil based bitumen emulsion primer @ 0.3 lit per sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced ( torch) application with 10cm overlaps . A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of membrane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified.

M&L for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc., complete all as specified and directed.

Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc., complete all as specified and as directed.

Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc., complete all as specified and as directed.

M&L for dismantling asbestos cement (corrugated semi corrugated etc.) sheet in roof covering/ fibre sheets etc complete all as specified and directed.

Dismantling battens for tiles any size exceeding 15cm in spacing complete all as specified and as directed.

Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section complete all as specified and as directed.

Dismantling timber Scantling framed work 40 Sqcm and over in section, in any position complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc., complete all as specified and directed.

S&F joist channel, angle or tee sections, fixed independently without connecting plates, etc, (cut to ordinary lengths i.e. within 20mm of the length indicated of Fe 410-W ( Gde-E-250) quality-A as in purlins, rafters etc complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based Corrugated steel sheet 0.50mm thick, AZ-150 of approved colour and mangalore pattern having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain/profiled steel sheet 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

S&F CGI sheeting 0.63 mm thick with two corrugation side lap fixed with L or J type bolts in roof walls etc., with grade of Zinc coating 275 gm/Sqm complete all as specified and as directed.

S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with L or J type bolt, grade of zinc coating 275 gm/Sqm complete all as specified and as directed.

M&L for preparation of existing kota stone / cement stone slab flooring at any position and polishing with machine to surfaces in two steps (1st step with rough stone & 2nd step with fine stone and pointing of joints to match the colour of kota including treating the surface with bees wax polish complete all as specified and as directed.

S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 38x24.7x0.30mm cross tee 26x24x0.30mm and wall angle 24x24x0.30mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Roughning of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, complete all as specified.

Material and labour for glazed ceramic coloured wall tiles of approved colour of size 350x 250x 7/ 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed

Material and labour for non-skid ceramic coloured tiles of size exceeding 0.11 Sqm but not exceeding 0.18 sqm of 7 to 8 mm thick, in floors etc., set and jointed in neat cement slurry and pointed in white/coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiles complete all as specified and as directed

M&L for double charged vitrified ceramic tiles of any approved shade 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, laid over and including cement screed bed of cement mortar 1:6 of 15 mm thick complete all as specified and directed.

M&L for double charged vitrified ceramic tiles of any approved shade 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in walls skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

S&F stainless steel sink with drainage board, 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement mortar to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali/Blue star ISI marked.

S&F in repairs stainless steel kitchen plate rack complete all as specified and directed. Make: Cat No P-348 of Prayag polymers Pvt Ltd or equivalent as approved by GE.

Supply and fix in repairs PVC waste pipe 32/40 mm dia fixed to WHB/Kitchen Sink complete all as specified and as directed

Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed. Make: CAT No 92072 of HINDWARE (S-10/P-18) Pastel colour or equivalent in PARRYWARE/CERA/JAQUAR as approved by GE.

S&F in repairs vitreous China counter top wash basin of size 600 x 450 x 190 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed. Make: CAT No Jaquar Code- QNS-WHT-7601AT No 10051 or equivalent in HINDWARE PARRYWARE/CERA as approved by GE.

Material and labour for cutting of granite slab for fixing of under counter wash basin including rounded and grinding the stone with necessary arrangements complete all as specified and as directed.

Supply and fix in repairs towel ring brass chromium plated complete all as specified and as directed. Make: CAT No F880007 or HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs of brass chromium plated towel rack 600 mm long with lower hangers, brass screws and wooden/plastic cleats complete all as specified and as directed. Make: CAT No F840010 or HINDWARE or equivalent in JAQUAR / PARRYWARE/CERA as approved by GE.

Supply and fixed in repairs soap dish brass complete all as specified and as directed Make: CAT No F880011 of HINDWARE or equivalent model in JAQUAR/ PARRYWARE/CERA as approved by GE

Supply and fix in repairs toilet paper holder with flap, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed. Make: CAT No F880003 or HINDWARE or equivalent in JAQUAR/PARRYWARE/CERA as approved by GE.

S&F in repairs CP brass 32 mm bottle trap for wash basins / urinals with inlet and outlet screwed for pipe connections including necessary packing, union and cap and fixed complete all as directed. Make: Jaquar Code ALD 769 or equivalent in Hindware/Parryware/Cera as approved by GE.

Supply and fix in repairs 15mm bore brass Chromium plated wall mixer with provision for both hand shower and overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges (without) hand and overhead shower for mixing hot and cold water, screwed down complete all as specified and as directed. Make: F330022 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm bore brass Chromium plated central hole basin mixer with out popup waste system with 450 mm long braided hoses, screwed down complete all as specified and as directed. Make: F330014CP of HINDWARE or equivalent in Parryware/CERA/JAQUAR as approved by GE.

Supply and fix in repairs over head shower 80mm dia round shape multi flow (ABS Body chrome plated with gray face plate) with rubit cleaning system complete all as specified and as directed. Make: CAT No F160008 of HINDWARE or equivalent in PARRYWARE/CERA/JAQUAR as approved by GE.

Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm dia brass chromium plated Two way Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200004FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm dia brass chromium plated Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200004FT of HINDWARE or equivalent in PARRYWARE/CERA/JAQUAR as approved by GE.

Supply and fix in repairs of 15 mm bore stop cock, brass chromium plated angle cock with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200005FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.

Supply and fix in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed Make: CAT No 551 of PRAYAG or equivalent model in POLYTUF as approved by GE

S&F in repair CP corner glass 12mm thick with brass bracket screws etc., complete all as specified and directed.

Supply and fixed in repairs of 6mm thick frame less bevelled rectangular wall mount plain mirror of any size and fixing of necessary Stainless steel finish solid mirror stud (12mmX19mmX2.5cm) complete all as specified and as directed Make: Saint-gobain, Modi guard or equivalent model as approved by GE

S&F in repair 12 mm thick toughened glass door engraved with logo with all patch fittings such as Ozone Opf-2(Top patch), Opf-3 (Bottom Patch), OPL-1 (corner patch lock with strike plate), OFS-ACC-GDP (Top pivot for patch fitting door), OGH-55 (32 x 130033) PSS Finish H-type Handle including floor door spring, pivot, cutouts, holes etc complete all as specified and as directed. Note: Rate shall be inclusive of Engraving logo, The contractor shall visit site before quoting and access exact requirement. No claim what-so-ever shall be entertained on this account. For additional details, if any, contractors are advised to visit AGE B/R (N) No I of GE North secunderabad.

Demolition of cement concrete (re-inforce) of any description and in any position not otherwise specifically provided in roof padding concrete etc., complete including removal of demolished material to a distance complete all as specified and as directed.

M&L for RCC M 20 (Nominal mix) using 20mm graded granite/tap stone aggregate as in Lintel band etc complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20 mm graded stone aggregate) as in RCC bands supported on walls, beams and columns in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc., also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as specified and as directed.

M&L for Formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas/beams/colns/fins/facia and spiral stair case not exceeding 200mm tick complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc., including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

Supply and fix stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed.

Supply and fix in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed.

Supply and fix in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed complete all as specified and as directed.

S&F in repairs 18mm thick Plywood grade BWR type BB, fixed with screws to frame work, fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs 12 mm thick Plywood grade BWR type BB, fixed with screws to frame work, fixed with screws to timber frame work complete all as specified and as directed.

M&L for Decorative laminate 0.9mm thick Type I of texture surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.

S&F 200mm long stainless steel decorative handle fixed with screws complete all as specified and as directed.

S&F 200mm long stainless steel hinge for cabinets auto close concealed type complete all as specified and as directed.

S&F stainless steel telescopic type ball bearing drawer channel of any size complete all as specified and as directed.

S&F stainless steel kitchen basket of size 17"x20"x4" of size complete all as specified and as directed.

All as per item No.70 above but of size 17"x20"x6" complete all as specified and as directed.

All as item No.70 above but of size 17''x20"x8'' complete all as specified and as directed.

Supply and fix Stainless steel dust bin holder 10" dia complete all as specified and as directed.

Supply and fix stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified and as directed.

M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and as directed.

M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and as directed.

S & F in repairs continuous (piano) hinges, mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws complete all as specified and as directed.

Supply and fix in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.

Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for walling of squared rubble masonry regular coursed, Secunderabad and Bangalore types, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

All as per item No. 82 above, but except stones complete all as specified and directed. Note- Serviceable stones obtained vide demolition item shall be reused after removing mortar and cleaning with water complete all as specified and directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces in two coats (10 + 5 mm), both coat mixed with integral water/liquid proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note - WPC shall be measured and paid separately

M & L for rendering 5 mm thick on concrete surfaces such as ceiling or soffits of chajjas etc., in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only water/liquid proofing compound of ISI marked complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer etc complete all as specified and as directed.

M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick wall putty etc., complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying two coat of white wash all as specified and as directed.

M & L for preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M & L for preparing old plastered ceiling surfaces and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces on walls, chajjas, filling of hair line cracks if any with white cement and applying two coats of weather proof paint over a coat of primer including preparation of surfaces etc complete all as specified and as directed.

M&L for Complete removal of existing treatment on walls and applying 2 coats of weather proof paint over a coat of primer including preparation of surfaces complete all as specified and as directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

Material and labour for 25 mm thick granite tiles (of any size) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over and including 15mm thick screed bed of 1:4 in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed

Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and as directed

Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc., complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Make: NCL/ELEXIR MET/ASHWANI & SONS

S&F 5.5mm Sheet glass, ordinary quality and glazing with oil putty in Square exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in Square n.exc 0.5 Sqm in each pane including hacking old broken glass panes complete all as specified and as directed.

M & L for preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint on steel surfaces over 10 cm width or girth complete all as specified and as directed.

M & L for preparation of old painted surfaces of wood and applying one coat of synthetic enamel paint on wood or wood based material over 10 cm width or girth complete all as specified and as directed.

S&F in repairs for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc., complete all as specified and as directed.

Dismantling water tanks exc. 500 and n. exc 1000 litres and removing to store complete all as specified and as directed.

S&F rotational moulded polyethyiene water storage tanks of triple layer (cylindrical vertical with closed top) of 1000 liters capacity complete all as specified and as directed.

Dismantling water tanks exc. 250 and n. exc 500 litres and removing to store at O/o AGE B/R (N) No. I complete all as specified and as directed.

S&F rotational moulded polyethyiene water storage tanks of triple layer (cylindrical vertical with closed top) of 500 liters capacity complete all as specified and as directed.

S & F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210 gms) complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc., complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S & F in repairs for 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc., complete all as specified and directed

S & F 110 mm bore UPVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down of old pipes complete all as specified and as directed.

Supply & fix UPVC/PVC (SWR) junction single (single T ) equal or unequal 110mm dia with access doors complete all as specified and as directed.

S&F 110mm dia vent cowl UPVC/PVC (SWR) complete all as specified and as directed.

S & F 110mm bore UPVC/PVC (SWR) plain bends, any radius complete all as specified and as directed.

S & F 75 mm bore UPVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down of old pipes complete all as specified and as directed.

Supply & fixing UPVC/PVC (SWR) junction single (single T ) equal or unequal5mm dia with access doors complete all as specified and as directed.

S & F 75mm bore UPVC/PVC (SWR) plain bends, any radius complete all as specified and as directed.

S&F UPVC/PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed.

Removing excavated earth at a level n exc 1.5m above the starting point to a distance exc 1.5 Km and n.exc 5 Km complete all as specified and as directed.

Material & Labour for plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate), 75mm thick as in sub-base to receive floor finishes complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade etc complete all as specified and as directed.

Spreading and levelling of Sand/ grit cushioning below interlocking tiles complete all as specified and as directed.

M&L for Precast cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in kerb stone, etc., and set in CM 1:4 complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

M&L for Cement concrete (1:2:4) type B–2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn in existing with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/Concealed wiring as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- (a) One light/ Bell point controlled by one, one way switch 5 amps, SP

All as per Sr item No. 141 above, but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

All as per Sr item No. 141 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per Sr item No. 141 above, but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

Description as per item No. 141 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor complete all as specified and as directed.

Supply and fix MODULAR switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and as directed.

Supply and fix MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and as directed.

Supply and fix Switch MODULAR 1 WAY 16 amps, 230 Volts complete all as specified and as directed.

Supply and fix electronic ceiling fan regulator MODULAR 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.

Supply and fix Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.

S & F ding dong Bell AC,230 Volts, single pole complete all as specified and as directed.

S & F wall mounted Indus plus LED Batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x20 w watts, 230 volts, bipin holders, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fix LED security light luminaire fitting of 1x35 watts with deep drawn housing including all accessories and LED lamp 25W with suitable 40 mm dia GI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and as directed.

Supply and fix TPN distribution board of 4 way double door with incoming MCB TPN 415 volts AC, 3 phase, 50 Hz, 25 KA Breaking Capacity with fixed magnetic setting for current rating of capacity 63 Amps including MCB 4P conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommodated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement and taking down old unserviceable DB complete all as specified and as directed.

S & F MCB TPN 240 volts suitable for fixing in MCB DB of capacity 63 amps complete all as specified and directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SP 6 to 40 Amps 240 volts for fixing on MCB DB's all as specified.

S & F MCB SPN 40 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed.

Material and labour for sub main wiring with 4 runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 10 Sqmm and drawing through PVC conduit of 25mm dia with accessories on surface in wall/roof along with one run of 10 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 5 runs of 10 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Material and labour for sub main wiring with two runs of single core FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 4 square mm and drawing through PVC conduit of 20mm dia with accessories on concealed in wall/roof along with one run of 4 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 4 Sqmm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, galvanised iron funnel with watering pipe, wire mesh, complete.

S&F in replacement of sheet steel MS enclosure earth plug socket 2 pin 20 amps with metal 20 amps with MCB 20 amps complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M & L for cutting chases, pining to making good to facing where ever required and pointing in cement motor 1:3 to ends or edges of endings, steps, cills etc and cutting chases for concealed wiring making good and cutting not exceeding 10 cm girth complete all as specified and as directed.

Taking down existing old vintage ceiling fans and depositing to MES store yard complete all as specified and as directed.

Taking down existing exhaust fans and refixing the same after serving in same position complete all as specified and as directed.

radhika enterprises

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

M/s GM Constructions

NEWS CONSTRUCTIONS

SAI RUPA CONSTRUCTIONS

harshraj and co

BEEGEE DESIGN SYSTEMS