REPAIR REPLACEMENT TO MAINTENANCE OF STEEL FURNITURE ITEMS AT MIL STN GANDHINAGAR

Amount

Repairs to Charpoy GI 32mm ply top (Drg No FD-220R)

Removing unserviceable ply top and S&F new plywood top of size 1980mmx900mmx12mm thick BWR grade ISI Marked . Plywood top shall be fitted with appropriate sizes of nuts and bolts with washer all as specified and shown on drawings and as directed.

Removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI Pipe 32mm bore (ISI marked) medium grade including threading both sides all as specified in Drg & directed.

Removing of old damaged/broken short rail from Charpoy and making of short rail from old u/s long rail (retervied from ser item No 1.02 above) including threading & fixing in charpoy GI Pipe all as specified in Drg & directed.

Removing of old damaged/broken leg from charpoy and making leg from old u/s short rail (retervied from ser item No 1.02 &1.03 above) including threading & fixing in charpoy GI Pipe all as specified in Drg & directed.

Removing of old broken/damaged check nuts and S&F new check nuts of 32 mm dia heavy duty to Charpoy GI pipe all as specified in Drg & directed.

Removing old broken/damaged GI elbow, 3 way, 32 mm bore and S&F new GI elbow, 3 way, 32mm bore (ISI marked) to Charpoy GI pipe all as specified in Drg & directed.

Removing damage/broken welded suports from charpoy GI Pipe 32mm and S/F new support made out of 40 x 6 mm flat iron, 850 mm long duly welded to charpoy including applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified in Drawing and directed.

Repair to Charpoy IP folding (FD-388 & FD 388(R))

Removing of old unserviceable charpoy top and S & F new top of 8-9mm thick plywood BWR grade (ISI Marked ) with appropriate size nuts,bolts & washer including thightening the loose components complete all as specified in drg and directed.

Removing of old unserviceable members of charpoy folding and S & F new members of 25 mm dia 2 mm thck MS condute fixed with gas welding as specified & shown in drg.

M & L for preparation of old painted steel surfaces by scraping/rubbing with sand paper and filling depressions with putty where ever required and applying one coat of synthetic enamel paint of approved shade complete all as specified in drg and directed.

Repair to Chorpoy IP Hard top FD/MAP-II/01

Removing of old unserviceable ply wood from charpoy and S&F new 12 mm thick plywood, BWR grade, (ISI Marked) to the top of charpoy IP of appropriate size including fixing to charpoy using nuts, bolts and washers as shown on drg complete all as specified in drg and directed.

M & L for preparation of old painted steel surfaces by scraping/rubbing with sand paper and filling depressions with putty where ever required and applying one coat of synthetic enamel paint of approved shade complete all as specified in and directed.

Repair to Chair Verandah (Drg No FD-19(M), FD-256, FD-359 & FD/E6/MAP-II/06

Re-caning of Chair Verandah with 4mm wide & 0.4mm thick half round plastic cane except border which shall be 5mm wide & 0.6mm thick flat super quality cream/ white colour including applying one coat of synthetic enamel paint White after preparation of surface to complete frame of chair all as specified and directed.

Repairs to broken mild steel components of chair verandah with gas welding all as specified and directed.

Removing old broken leg of chair verandah and providing new 20mm dia MS pipe 1.6mm thick complete with welding all as specified and directed.

Removing old broken PVC seat & back of chair verandah and S & F new PVC seat & back 4 mm thick as specified and directed.

S&F, PVC rubber Shoe/Toe of best quality for the legs of chairs after removing the old un- serviceable shoes all as specified and directed.

REPAIR TO TABLE DINING OR'S STEEL WITH ALUMINIUM TOP (Drg No FD-165)

Removing existing unserviceable table top and S&F, new table top made from block board, grade 2 quality, interior grade, commercial type, 19mm thick, size 1910x 680mm (ISI Marked) duly covered with anodised aluminum sheet 22 gauge thick and fixed with screws to MS pipe frame all as shown in drawing and directed.

M&L for gas welding to broken joints/spots of 25mm x 25mm square pipe frame all around all as specified and directed.

Cutting of worn out/damaged legs of table and replaced with new MS square pipe piece 3" to 4" long including welding complete.

M&L for painting to MS frame of table dining with one coat of black synthetic enamel paint including preparation of surfaces complete all as specified and as directed.

Removing unserviceable hard rubber shoe from legs of table and S&F, new hard rubber shoes as per existing size complete.

Repairs to Almirah Large Steel (Drg No FD-67(M) &1031)

M&L for one coat of synthetic enamal paint OG to internal /external surface & shelves completely after preparation of old painted surfaces by applying sand paper and filling with putty where ever required to Almirah Large steel all as specified & directed .

Removing of old broken/unserviceabble shelves from Almirah large steel and S&F new shelves made out of 1mm thick MS sheet bent to shape required all as specified in drg & directed .

Removing broken/ dacayed legs from exsiting Almirah Large steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed.

Removing of old unserviceable locking device three way from exsiting Almirah Large steel and S&F new locking device made out of 10 mm dia MS bar round and 3 mm MS plate all as specified in drg and directed .

Removing of broken/unserviceable handle from existing almirah large and S&F new Chromium Plated steel handle 100mm long all as specified in drg & directed.

Removing of old unserviceable lock from exsiting almirah Large (Drg No FD-67(M), 1031 & 1032) and S&F new four lever lock with duplicate keys all as specified in drg & directed .

Removing of old/broken cleats from existing Almirah largesteel with shelves (Drg No FD-67(M), 1031 & 1032) and S&F new cleats made out of 1.6 mm thick PBI sheet bend to shape and shall be fixed with nut & bolt to give support to shelves all as specified in drg & directed.

Repair to Almirah Med Steel (Drg No FD-1032)

M&L for one coat of synthetic enamal paint OG to internal/external surface & shelves completely after preparation of old painted surfaces by applying sand paper and filling with putty where ever required to Almirah Medium steel all as specified & directed .

Removing of old broken/ unserviceabble shelves from Almirah Medium steel and S&F new shelves made out of 1mm thick MS sheet bent to shape required all as specified in drg & directed .

Removing broken/ dacayed legs from exsiting Almirah medium steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed .

Removing of old unserviceable locking device three way from exsiting Almirah Medium steel and S&F new locking device made out of 10 mm dia MS bar round and 3 mm MS plate all as specified in drg and directed.

Removing of broken/unserviceable handle from existing almirah large/medium and S&F new Chromium Plated steel handle 100mm long all as specified in drg & directed.

Removing of old unserviceable lock from exsiting almirah Large/Med steel (Drg No FD-67(M), 1031 & 1032) and S&F new four lever lock with duplicate keys all as specified in drg & directed .

Removing of old/broken cleats from existing Almirah large/medium steel with shelves (Drg No FD-67(M), 1031 & 1032) and S&F new cleats made out of 1.6 mm thick PBI sheet bend to shape and shall be fixed with nut & bolt to give support to shelves all as specified in drg & directed.

Repairs to Teapoy Varandah (Drg No FD-35(M), FD- 295, D-255, FD-383)

M&L for spot welding to broken joints of MS member of teapoy verandah all as specified and directed

Removing old u/s tops from Teapoy varandah and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) both side white with teak wood beading all around all as specified in drg & as directed .

M&L for one coat of synthetic enamal white paint to Teapoy Varandah after preparation of old painted surfaces by applying sand paper and filling with putty where ever required all as specified & directed .

REPAIRS TO CHAIR TUBULAR STEEL WITH OR WITHOUT ARMS (Drg No FD-75(M)

M&L for gas welding to broken members of chair tubular steel, with & without arms all as directed

M&L for painting of MS frame of chair tubular steel with arms with one coat of olive green synthetic enamel paint all as specified and directed.

M&L fot painting of MS frame of chair tubular steel without arms with one coat of olive green synthetic enamel paint all as specified and directed.

Dismantling of unserviceable seat of chair tubular steel with arms and without arms, S&F new seat made out of Ist class hard wood frame of size 18"x16" and 18"x18", fixing to chair with 75 x 6mm GI nut and bolt, including canning with 2mm plastic cane white half round and 4 mm plastic cane for border all as per drawing .

Dismantling to unserviceable back of chair tubular steel with arms and without arms, S&F of new back made out of Ist class hard wood frame of size 16"x16" and 18"x15", fixing to chair with 75 x6mm GI nut & bolt, including canning with 2mm plastic cane white half round and 4 mm plastic cane for border all as per drawing .

S&F of plastic cap 19mm dia to plug the open end of pipe of chair as shown in drawing .

Dismantling of unserviceable hand rest and S&F new hand rest made out of Ist class hard wood duly painted with black colour complete all as shown in drawing and directed

Repairs to Table Office Clerk Steel (Drg No FD-84(M) & 1004)

M&L for one coat of synthetic enamal paint OG to all steel Surface after preparation of old painted surfaces by applying sand paper and filling with putty where ever required to Table office clerk steel all as specified & directed.

Removing of unserviceable drawers from existing table office clerk steel and S&F, new drawers made out 1 mm thick MS sheet all as specified in drg & directed.

Removing old u/s tops from Table office clerk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side white with 4mm thick teak wood beading all around, all as specified in drg & as directed.

Removing of old unserviceable lock from exsiting table office clk steel and S&F new four lever lock with duplicate keys all as specified .

Repairs to Table Office Officer Steel (Drg No FD-84(M) , 1003 &FD-1022 )

M&L for one coat of synthetic enamal paint OG to all steel Surface after preparation of old painted surfaces by applying sand paper and filling with putty where ever required to Table office Officer steel all as specified & directed.

Removing of unserviceable drawers from existing table office Officer steel and S&F new drawers made out 1 mm thick MS sheet all as specified in drg & directed.

Removing old u/s tops from Table office Officer steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side white with 4 mm thick teak wood beading all around, all as specified in drg & as directed .

Removing of old unserviceable lock from exsiting table office Officer steel and S&F new four lever lock with duplicate keys all as specified.

M&L for gas welding to broken joints of table office Officer/Clerk steel all as specified and directed.

REPAIR TO TABLE 900MM X 600MM X 760MM WITH DRAWER/WITHOUT DRAWER STEEL (Drg No FD-1008 & FD-1007 )

Taking down unserviceable table top and S&F new top of 18 mm thick prelaminated particle board, interior grade, solid core with melamine face on one side and balancing white on other side including 4 mm thick teak wood edging all around complete all as shown on drawing.

M&L for gas welding to broken joints of table Steel all as specified .

Removing of unserviceable locks of drawer and supply & fixing new four lever locks with key in duplicate all as specified in drawing.

Repairs to the drawer of table steel by making good dents, proper alignment for smooth function of drawer and preparation of old surfaces, inside and outside of drawer and legs & applying one coat of olive green paint by spray painting all as specified and directed.

Repairs to Bed Hard Steel FD/E6/MAP/8(R)

M&L for removal of u/s ply wood of bed and S&F new ply wood 12 mm thick, BWR grade, ISI marked including fixing with suitable size screw & cup washer complete all as shown on drg and specified.

M&L for retightening of loose components of bed including welding where ever required on joints, replacement of old nuts & bolts where ever required and touching up on welded points with synthetic enamel paint of same colour/ shade all as shown on Drg & directed .

M&L for removal of prelaminated particle board Headrest of bed , and S&F new 18 mm thick prelaminated particle board exterior grade mellamine faced veneered both side decorated(ISI Marked) with 4 mm thick teak wood beading of suitable size including fixing in position with screws & washers, complete all as shown on drg and directed.

M&L for removal of prelaminated particle board footrest of bed , and S&F new 18 mm thick prelaminated particle board exterior grade mellamine faced veneered both side decorated (ISI Marked) with 4 mm thick teak wood beading of suitable size including fixing in position with screws & washers, complete all as shown on drg and directed.

Repair to Chair School with hand board ( Drg No FD/E6/MAP/05 )

S&F in replacement of Hand board of 18 mm thick prelaminated particle board exterior grade mellamine faced veneered both side decorated (ISI Marked), including 4mm thick teak wood beading all round, fixed to frame with suitable 12 Nos nuts, bolts & washer complete all as specified on drg and directed.

S&F in replacement of polypropelene (Seat & Back) set complete all as specified and directed.

S&F in replacement of hard rubber/PVC shoe/ring of superior quality with suitable screw complete all as specified and directed.

REPAIR TO TABLE 900 MM x 900 MM x 760 MM STEEL (Drg No. FD-121(M)

M&L for removing old unservicable top and S&F, new top made out of prelaminated particle board 18mm thick exterior grade (ISI marked), with one side melamine face and balancing white on other side with 4 mm thick teak wood edging alround all as specified & shown in drg.

M&L for Gas welding to broken joints of table steel all as specified and directed.

Cutting of worn out portion of legs of table and S&F new 25x25mm square pipe of 1.6mm thick piece of 3” to 4” long including gas welding complete all as specified and directed.

M&L for preparation of old painted surface and applying one coat of black synthetic enamel paint complete all as specified and directed.

REPAIR TO ALMIRAH LARGE GLAZED (Drg No. FD-104(M)

M&L for one coat of synthetic enamal paint OG to internal/external surfaces & Shelves complete after preparation of old painted surfaces by applying sand paper and filling with putty where ever required to Almirah large glazed all as specified & directed.

Removing of old borken/unserviceable shelves from Almirah large glazed and S&F, new shelves made out of 1mm thick MS Sheet bent to shape required all as specified and shown on drawing.

Removing of old borken/unserviceable glass from Almirah large glazed and S&F, new glass as specified and shown on drawing.

Removing broken/dacayed legs from exsiting Almirah large glazed and S&F new legs made out 1.00 mm thick MS sheet bent to shape all as specified and shown on drawing.

Removing of old unserviceable locking device three way from existing Almirah large glazed and S&F new locking device made out of 10mm dia MS bar round and 3mm MS plate complete all as specified and shown on drawing.

Removing of broken/unserviceable handle from existing Almirah large glazed and S&F new Chromium Plated steel handle 100mm complete all as specified and shown on drawing.

Removing of old unserviceable lock from existing Almirah large glazed and S&F new four lever lock with duplicate keys complete all as specified and shown on drawing.

Removing of old/broken cleats and S&F cleats made out 1.6mm thick PBI sheet bend to shape and shall be fixed with nut & bolt to give support to shelves all as specified & directed.

REPAIR TO CHAIR REVOLVING & Computer Chair TP & FD/E6/MAP/01

Removing of old unserviceable hand rest of chair revolving/chair computer and S & F new hand rest black integral skin as shown on drg

Removing of old unserviceable back of chair revolving/chair computer and S & F new back with PVC lipping alround as shown on drg

Removing of old unserviceable seat of chair revolving/chair computer and S & F new seat with PVC lipping alround as shown on drg

Removing of old unserviceable pedestal assy of chair revolving/chair computer and S & F new pedestal assy and hydrolic pump as shown on drg

Preparation of old painted surface of chair revolving and applying one coat of synthetic enamel paint by spray with black enameled colour all as directed.

REPAIR TO STOOL STEEL 2' HEIGHT (DRG No FD-81(M))

Preparation of old painted surface and applying one coat of Olive Green synthetic enamel paint complete all as specified and directed.

Removing of old unserviceable stool top and S&F, new top of stool of 1.6mm thick MS sheet (top size 305 x 305) complete all as specified and shown on drawing.

Removing of old unserviceable legs of stool and S&F, new legs of stool of 1.6mm thick MS sheet complete all as specified and shown on drawing.

Removing of old unserviceable broken top rail of stool and S&F, new top rail of stool of 1.6mm thick MS sheet complete all as specified and shown on drawing.

REPAIR TO FORM WITH BACK/ WITHOUT BACK (Drg No FD-78)

S&F, seat made out of 2nd class hard wood (Sal) of size 1800mm x 235mm x 25mm fixing with round head nut & bolt 75mm x 6mm to the MS frame of form with back including polishing to wooden seat complete all as shown on drawing, specified and directed.

S&F, back rest made out of 2nd class hard wood (Sal) of size 1800mm x 150mm x 18mm fixing with round head nut & bolt 75mm x 6mm to the MS frame of form with back including polishing to wooden back rest complete all as shown on drawing, specified and directed.

M&L for Welding to broken joints of form with back of MS frame all as specified.

Cutting of worn out/broken legs of form with back and S&F new square/round MS pipe 1.6mm thick of required size and fixing with gas welding complete all as shown on drawings.

M&L for painting to complete MS frame of form with back with one coat of black synthetic enamel paint complete all as shown on drawing, specified and directed.

Navkar Enterprises (BID ID -3092346)