GE 863/EWS-T-21 OF 2020-21

Amount

S& F in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or glavanized wire staples, beads or in steel windows complete all as specified and directed.

S&F in repairs 300mm, Helical door springs including roller and roller plate complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 250mm complete all as specified and directed.

S&F in repairs Aluminium anodised,barrel tower bolts of extruded section and fixed 200 mm long etc complete all as specified and directed.

S&F in repairs Aluminium handles, cast type, anodised 150mm long completed all as specified and directed.

S & F in repair Harrison rails, anodised aluminium alloy 20mm dia with fixing brackets,stops, rollers etc.complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and directed.

Taking down shutter of any description not exceeding 1.0 Sqm and refixing the same opeing after resecuring or easing and adjusting etc complete all as specified and directed.

Ditto all as per item No above but exceeding 1.0 Sqm but not exceeding 2.0 Sqm each.complete all as specified and directed.

S&F in repairs 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L/J hooks in roof and wall complete all as specified and directed.

S&Fin repairs door closer cast copper iron body hydraulically regulated designation No. 2 universal type, suitable for door shutters of 36 to 60 Kg (Cast iron body) etc complete all as specified and directed.

S&F in repair floor door stopper over all length of cover plate 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floors etc complete all as specified and directed.

Taking down existing AC/PVC pipe and S&F PVC (SWR) pipe/ (rain water pipes) single socketed with rubber ring joints 110mm bore fixed to walls etc complete all as specified and directed.

S&F in repairs 15 mm bore tubes medium grade galvanized with all fittings in short lengths, fixed to walls or laying in floors etc complete all as specified and directed.

S&F in repairs 20 mm bore tubes medium grade galvanized with all fittings in short lengths, fixed to walls or laying in floors etc complete all as specified and directed.

Disconnecting existing water tanks, for repairs, cleaning and removing all scale and dirt etc from tanks, and from mouth of circulating pipes etc and reconnecting in same position, of capacity exc 250 ltrs and not exc 500 ltrs each etc complete all as specified and directed .

Diito all as per item No above but capacity of tank exceeding 500 ltrs but not exceeding 1000 ltrs each complete all as specified and directed.

S&F in repairs bib taps fancy type chromium plated with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipeetc all as specified and directed.

S&F in repair stop valves 15mm bore , cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

Ditto all as per item No above but 20mm bore

S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed

S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore pipe complete all as specified and directed.

Ditto all as per item No but for 15mm bore pipe

S&F in repair 32mm dia PTMT 610mm long waste pipe suitable for WHB or Sinks etc complete all as specified and directed

S & F in repairs grating round 150mm dia PTMT minimum weight 50 gms fixed to Floor trap/Nahni trap fixed in CM 1:6 etc complete all as specified and directed.

S&F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe etc complete including making good to floor etc complete all as specified and as directed.

S&F in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs vitreous China Water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including including connection to trap, and to flushing pipe, anti-syphonage pipe, provision of lime concrete bedding etc complete all as specified and directed.

S&F in repairs stainless steel sink 1mm thick for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.

S&F in repair stainless steel sinks with draining board made of 1mm thick sheet with over all size 915mm x 460mm and bowl size 410mmx330x160mm for kitchen or laboratory with pluge washers and waste, including bedding in cement mortar 1:4 on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat, back of size 580mm x 450mm including 32mm waste coupling and PVC waste down pipe complete all as specified and directed.

S & F in repairs Vitreous china bowl urinal flat back size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern) but including urinal pipe etc complete all as specified and directed.

S & F in repairs Chromium plated brass health faucet (hand spray) with 1mtr long PVC flexiable pipe 15mm bore and fixed to in position etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 300 x 200 x 7 mm thick skirting/dado set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick cement plaster in cm (1:4) complete all as specified and directed.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm, in floors etc. over and including 15 mm thick screed bed in cm (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc. over and including 15 mm thick screed bed in cm (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular, polished, area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed of cm 1:6 complete all as specified and directed.

Ditto as item No 41 above but as in skirting over and including rendering 10mm thick in cement mortar 1:4.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting of any guage, thickness, including Nainital or similar pattern roof covering etc complete all as specified and directed.

S&F galvanised corrugated mild steel sheeting 0.63mm thick with zinc coating grade 275, 2 corrugation side lap fixed with L or J type hooks or cranked hook bolts in roof and wall etc complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

S&F in repairs vitreous China Urinal, half stall type, white with 32mm bore PVC waste pipe of length 900mm to 1200mm and including urinal spreader of PTMT any colour for fixing with 15mm dia pipe including connection to flushing pipe and outgoing pipes with 32mm bore PVC waste pipe of length 900mm to 1200mm complete all as specified and directed.

Demolition of precast concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L 1:3:6 type C-2 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 finished even and fair complete all as specified and directed.

M&L 10mm thick rendering on brick work or concrete surfaces in cement mortar 1:6, finsihed surface fair and even without using extra cement complete all as specified and directed.

M&L two coats cement base paint over a coat of chalk whiting on plastered surface including preparation of newly plastered surfaces complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces including preparation of surfaces complete all as specified and directed.

Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and directed.

Taking down chowkats or frames area n.exc. 1.5 Sqm (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters (of any description) area exc. 1sqm but n. exc 2.0 Sqm each complete all as specified and directed.

S&F pressed steel frames, size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. incl one coat of red oxide primer complete all as specified and directed.

S&F pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. incl one coat of red oxide primer complete all as specified and directed.

M&L Providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats complete all as specified and directed.

S & F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides complete all as specified and directed.

S&F factory made 35mm thick second class hard wood Glazed and skelton door shutters, open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I, section 8 clause 8.24(a) complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F Anodised aluminium frame of doors, windows & ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors, hinges, anodiesed aluminium snap beading screw etc. complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F 4.80mm thick sheet glass ordinary quality & glazing fixed with aluminium snap beading as in aluminium window and door shutter in area exc. 0.5 sqm each pane complete all as specified and directed.

S&F framed work such as framed guard bars, barred iron doors, grills, gratings, etc with ends of bars shouldered or riveted framed guard bars and similar work confirming to Fe-290. Gde E-165 complete all as specified and directed.

M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed.

M&L two coats of synthetic enamal paint to steel surfaces of any discription over 10 cm width or girth not otherwise described over a coat of red oxide primer including preparation complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S & F butt hinges, 100mm medium weight, cold rolled mild steel complete all as specified and directed.

S&F 125mm aluminium handles, cast type, anodised and pattern/design as approved complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 Type C-1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth without using extra cement complete all as specified and directed.

Dismantling water tank & removing to store of capacity exc 1000 and n exc 2000 Ltr and S&F rotational moulded polythylene water strarge tanks 2000 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position with ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore pipe complete all as specified and directed.

Dismantling water tank & removing to store of capacity exc 500 and n exc 1000 Ltr and S&F rotational moulded polythylene water strarge tanks 1000 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position with ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore pipe complete all as specified and directed.

Dismantling water tank & removing to store of capacity exc 250 and n exc 500 Ltr and S&F in rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top) hoisted and fiexed in position with ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore pipe complete all as specified and directed.

Dismantling false ceiling boards any description and in any position incl frame work complete all as specified and directed.

S&F anodised aluminium snap grid of size 600 X 600mm frame work for false ceiling and hangers 6mm dia G I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

S&F Exposed metal frame ceiling with 8mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately) complete all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 32960.00

M/S Shamsher Negi Dewa

R B TRADERS