Miscellaneous Civil works for Sri Govindaraja Swamy Temple Brahmotsavam Tirupati for the year 2026 Short tender

Collection and supply of Quarry rubbish (35a) for building works to the site of work including cost and conveyance of all materials etc., complete as directed during execution.

Supply of Common burnt clay bricks of class as per Table -1 of IS:1077-1992 Non- modular or traditional size 23x11x7 cm to site of work.

Demolition of Brick work including stacking of serviceable materials and disposal of unserviceable materials within 100 meters lead etc., complete as directed during execution.

Demolishing of Unreinforced cement concrete up to 15cm thickness and disposal of unserviceable materials within 100 meters lead etc., complete as directed during execution.

Supply of Fine aggregate / Sand (Unscreened) for filling free from dust including cost and conveyance etc complete as directed during execution etc complete.

Cement Concrete M15 Grade (1:21/2:5) using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Supplying and fixing of scaffolding to structure for various Civil repair works etc., including cost and conveyance of all materials such as Casurino Poles, Bamboos, country wood planks, nails and coir puri to provide working plot form along with ladder up to required level strongly. After completion of work scaffolding should be removed carefully as directed during the execution etc., complete. Note: The measurement for scaffolding should be allowed for one face only.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Construction of Brick Masonry in CM(1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar with the following mix and thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

- do - (1:5) 12 mm thick.

- do - (1:3) 20 mm thick.

Painting priming coat with ready mixed Cement primer (water thinnable) for plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution.

- do - for Cement primer Exterior grade - 2 for NEW WORK.

Painting with Acrylic Emulsion paint EXTERIOR grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for EXTERNAL walls.

- do - for TWO coats for External walls - NEW

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls.

- do - For New works

Supply of ready mixed Synthetic Enamel paints in all shades Gr- I having VOC(volatile organic compound) content less than 50 grams / lit

Artist painting to like God / Animal / Birds pictures / Sceneries over Walls and MS sheet with three coats back ground (one coat primary & two coat synthetic enamel paint) the rate including cost of labour charges / Artist remuneration / materials cost like (Painting / brushes / scaffolding etc) complete as directed during execution.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of the following materials / Accessories as and when required. The rate is inclusive of cost and conveyance other incidental charges.

- do - G.I. wire 16 Gauge

- do - Turpentine.

- do - Fevicol / Wood adhesive compound

- do - of Country nails

- do - M.S. Tubes & pipes of all diameters as per IS-1161

- do - Plywood 9 Ply - 12 mm thick BWR/ BWP Grades - IS:303 (BOILING WATER RESISTANT).

- do - Plywood 9 Ply - 19 mm thick BWR/ BWP Grades - IS:303 (BOILING WATER RESISTANT).

- do - Synthetic clear Varnish of approved make

- do - Coir puri

- do - Coir rope of 1/2" dia 40'-0" long

- do - Cotton rope of all dia

Supply of Sarakulu (Thundlu) make of chintha wood(Tamarindan wood) of size 2’ 0” x 0’ 9” x 0’ 9” for use during festival of car dragging including labour charges for making the required shape cost and conveyance of all materials etc,. Complete as directed during execution.

Supply of M.S. Bolts/ Nuts/ Washers

Supply of G.I.Bolts and Nuts

Supply of the following labour as and when required by the dept., as directed during execution.

- do - Carpenter / Stone cutter / Mason / Plumber - Semi skilled work man (Second class)

- do - Welder - Semi skilled work man ( Second class )

- do - Man / Woman Mazdoors (Unskilled)

- do - Helpers / Cleaners (Second Class)

Hire charges for following including fuel charges crew charges etc., complete as directed during execution.

- do - for Core drilling machine/Drilling Equipment

- do - for Jack Hammer

- do - for Tractor with 2T Roller.

Engaging of the following machinery as and when required for dept. The rate is inclusive of crew, oils, conveyance of machinery to site and all other incidental charges.

- do - 3 Ton capacity Crane

Supply of best teak wood planks any thickness

Supply of Best Teak wood scantling up to 2 mts.

Labour charges for wrought and put-up for wood scantlings.

Removing the existing cut stone flooring carefully without damage. The stone should be conveyed and stacked as specified by the department as directed during execution. The rate is including labour charges for removing the slab carefully without damage, loading lifting stacking at site etc., complete as directed during execution.

Labour charges for re- laying the cut stone flooring as directed during execution, the rate is including lifting the cut stone slabs from store yard and unloading the same at work site carefully without damage etc., complete. The slabs should be jointed with CM ( 1:2 ). The joint should not be more than 6mm thick and the mortar should not come over the stone. The slabs should be laid jointed to proper alignment as directed during execution.

Machine mixed and vibrated design mix concrete M30 for pavement works for durability consideration with necessary reinforcement using 0.425 cu.m of 19mm to 22mm HBG crushed metal 0.425 cu.m of 12mm to 14mm IRC HBG crushed metal, 0.406 cu.m of sand of any approved quarry and cement 415 Kgs with water cement ratio of 0.38 (158 lit/cu.m of C.C) well compacted including centering with steel or wooden frames, preferably steel frames in straight position casting, curing cost and conveyance of all materials including centering charges, form work etc., complete but excluding cost of steel and binding wire, fabrication charges etc., complete as directed during execution and neat finishing of top surface and also providing expansion joints, construction joints wherever found necessary excluding cost of asphalt pad etc., complete.

NOTE: if pavement concrete is laid in between the existing kerbs deduction may be made proportionately for centering charges of Rs.160.00/cum