Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹3.0 L+₹3,387.74 (1.13%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L7 | |
| 4 | Rejected-Technical | - | Rejected-Technical L5 | |
| 5 | Not Admitted-Fee/PreQual/Technical/Finance | - | Not Admitted-Fee/PreQual/Technical/Finance Others-No licence cetificate |
| Sl No | Description | Qty | Unit | Vineeth R L4 | ARUNLAL C L1 | PRADEEP SR L2 | B.VIJAYAN NADAR L7 | Babu M L5 | SARATH S L6 | SURESH S A L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Wellness centre | ||||||||||
| 1.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 45.32 | sqm | 1,165.6 ₹52,824.99 | 1,096.72 ₹49,703.35 Lowest | 1,200 ₹54,384 | 1,350 ₹61,182 | 1,232.27 ₹55,846.48 | 1,342 ₹60,819.44 | 1,164.5 ₹52,775.14 |
| 1.00 | 17.7.1:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | 4 | each | 3,437.91 ₹13,751.64 | 3,234.74 ₹12,938.96 Lowest | 3,300 ₹13,200 | 3,970 ₹15,880 | 3,634.54 ₹14,538.16 | 3,960 ₹15,840 | 3,434.64 ₹13,738.56 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 201.51 | kg | 508.03 ₹1,02,374.14 | 478.01 ₹96,324.75 Lowest | 525 ₹1,05,793.8 | 588 ₹1,18,489.06 | 537.09 ₹1,08,230.08 | 585 ₹1,17,884.52 | 507.55 ₹1,02,277.42 |
| 1.00 | 14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface | 45 | sqm | 111.23 ₹5,005.35 | 104.66 ₹4,709.7 | 80 ₹3,600 Lowest | 130 ₹5,850 | 117.6 ₹5,292 | 128 ₹5,760 | 111.13 ₹5,000.85 |
| 1.00 | 21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete | 9 | each | 510.57 ₹4,595.13 | 480.4 ₹4,323.6 Lowest | 500 ₹4,500 | 590 ₹5,310 | 539.78 ₹4,858.02 | 588 ₹5,292 | 510.09 ₹4,590.81 |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 1,750 | per Letter per cm height | 5.26 ₹9,205 | 4.96 ₹8,680 Lowest | 5 ₹8,750 | 6.1 ₹10,675 | 5.57 ₹9,747.5 | 6.07 ₹10,622.5 | 5.26 ₹9,205 |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 9.69 | sqm | 1,112.98 ₹10,787 | 1,047.21 ₹10,149.56 Lowest | 1,100 ₹10,661.2 | 1,290 ₹12,502.68 | 1,176.64 ₹11,403.99 | 1,281 ₹12,415.45 | 1,111.92 ₹10,776.73 |
| 1.01 | 21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). | 17.76 | kg | 578.83 ₹10,281.18 | 544.63 ₹9,673.72 Lowest | 600 ₹10,657.2 | 670 ₹11,900.54 | 611.94 ₹10,869.28 | 667 ₹11,847.25 | 578.28 ₹10,271.41 |
| 1.01 | 50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | 20 | metre | 251.72 ₹5,034.4 | 236.85 ₹4,737 Lowest | 280 ₹5,600 | 291 ₹5,820 | 266.12 ₹5,322.4 | 290 ₹5,800 | 251.48 ₹5,029.6 |
Tender Value
₹3.4 L
EMD Value
₹8,454
Closing Date
22 Mar 2025, 5:00 pmClosed
Executive Engineer North
Executive Engineer North Thiruvananthapuram Corporation 695033
Pro. No. 2248/25 Health and wellness centre Kesavadasapuram ward in Trivandrum corporation (New Tender)
2025_LSGD_750594_1
EE(N)/PLANFUND TENDER/2024-25(16)
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kesavadasapuram
Please refer Tender documents.
9 documents required · 9 mandatory
₹750
Yes
₹8,454
Yes
22 Aug 2025
15 Mar 2025
24 Mar 2025
15 Mar 2025
22 Mar 2025
15 Mar 2025
Amount
Wellness centre
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
17.7.1:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface
21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
13.71:Lettering with black Japan pint of approved brand and manufacture
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall
OD422844/2024-2025:Providing and fixing UV/PVC DECORATIVE MARBLE SHEET with necessary nails etc. complete for patitions ( frame work to be paid separately):3.5mm thick
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
PRADEEP SR (BID ID -2169336)
SURESH S A (BID ID -2167327)
Vineeth R (BID ID -2168750)
Babu M (BID ID -2168692)
SARATH S (BID ID -2167827)
B.VIJAYAN NADAR (BID ID -2167840)
Bidder Name
SURESH S A
ARUNLAL C
PRADEEP SR
Vineeth R
B.VIJAYAN NADAR
Babu M
SARATH S
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1215360.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .