PROVN OF DEFICIENT GEYSERS AT SMQ, SPECIAL REPAIRS TO WIRING OF PRIMARY WING AT AF-II, CERTAIN WORK SERVICES AT DSC MESS, NEAR BLDG NO. P-862 AND AF-II AREA AND INSTALLATION OF ANTI SUICIDE FAN RODS IN SMQS AT AF STATION UNDER GE (AF) JAMNAGAR NO.2

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying pipes, cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M & L for Broken stone Hardcore of broken stone of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all specified and directed.

Returning, filling including spreading, watering and well ramming in layers n.exc 25 cm in soft/loose and hard/dense soil complete all as specified and directed.

Removing excavated material exc 1.5 km but n.exc 5.0 km and depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 (using 20mm graded stone aggregate), exc. 10 cm in width and setting in cement mortar (1:6), completeall specified and directed.

M&L for 10 mm thick plastering in CM 1:4 on fair faces of concrete surfaces finished even and fair on wall.

M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls other than fair face to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed .

M&L for preparation of new plastered surfaces of walls and applying two coat of cement Base paint over a coat of primer complete all as specified and directed.

M & L for providing type C0 1:3:6 (using 12.5mm graded stone aggreagte) precast cement concrete louvres and jallies, 25mm thick in CM 1:4 (measured solid), including all mouldings but excluding frame complete all as specified and directed. Note : Precast frame shall be measured separately and paid for under item 04032.

M & L for providing precast cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) set in CM 1:4 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar with joints to match complete all as specified and directed.

M&L for Granite work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete.

M & L for granite (of any type) work 18 to 20mm (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of Granite / Kota stone slabs edge, such as in steps cooking plateform, and other similar situation.

M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 350 x 250 x 7mm / 450 x 350 x 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete including electric fittings all as specified and directed.

M&L for non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick of size exc 0.06 sqm but n exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

Providing & supplying precast RCC benches with minimum 4 Kg steel provided for sat, back & legs having following size Length = 1.5 meter, finished thickness = 60mm, seat width = 0.45 meter, back height = 0.45 meter, thickenss of supports ( Legs) = 0.10 meter, Height of benches = 0.50 meter. The rate includes finishing the benche with Coloured pattern. The rate includes reinforcement, finishing curing, loading, unloading and placing at site as per instructions given by Engr-in-charge.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 11611979 grade St.-240 complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

M&L for providing cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) in coping and edge of paver block or mud stops, rounded or chamfered on edge complete all as specified and directed.

M&L for preparation of new steel or iron surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Pre cast RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slab for Shelf and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement steel will be measured & paid separately.

M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F 15 mm size bib cock long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. Make: Plumber Cat part No EC-0203 or equivalent make mentioned in Appx 'B' to PS.

S&F 15 mm size angle cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. Make: Plumber cat part No EC-0507 or equivalent make mentioned in Appx 'B' to PS.

Supply and fix 15 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concealed or exposed /ceiling or laying in floors complete all as specified and directed. Note:- Cutting chease wherever required will be measured & paid separately.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3 complete all as specified and directed.

Supply and fix 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe 32 mm , PVC connection 450 mm fixed in position and connecting complete all as specified and directed.

S&F white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed.

S&F white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including MS brackets comprising of the following items :- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap fancy typev cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete. (c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete.

M & L two coats of oil bound distemper on new plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed.

Taking down carefully (copper / aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point, socket point or power point including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing material for taking credit and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces with distemper / white washing / colour washing as per existing complete all as specified and directed.

Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs complete sealing the cable end and making good disturbed surface by walls etc.

Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings, bulk head fittings, tube light fittings, street light, flood LED lights etc all as specified and directed.

M&L for point wiring with PVC insulated and unsheathed multi stranded FRLS copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories suitable for modular type fitment including joint boxes, terminal boxes etc complete along with copper earth wire PVC insulated & unsheathed multi stranded (FRLS) copper conductor cable of size 1.5sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper / white washing / colour washing to match with the existing surface complete all as specified and as directed. Note: Modular metal boxes will be measured & paid seperately.

One Light point / Fan point controlled by one switch

One 3 pin socket outlet 5Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board

One bell /Buzzer point controlled by one bell push 5 amp on the same board with other switches or independent

One light point controlled by two 2-way switch with cable 1.5 sqmm

M&L for point wiring for power point with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories suitable for modular type fitment including provision of modular flush boxes of suitable size and thickness as per IS complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 2.5 sqmm as continous earth wire connected to common earth and earth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

All as per item No.40 above but wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 4.0Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as continuous earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

M&L for Ceiling rose, 2 to 3 terminal PVC / polycarbonate, isolated body type suitable for AC 230 volts complete all as specified and directed.

M & L for module cover plate with frame as per site requirement for following module:-

1 module

2 module

3 module

4 module

6 module

8 module

M & L for Modular metal Flush box as per site requirement.

1/2 module

3 module

4 module

6/8 module

M & L for modular switch 1 way 6 Amp 1 Module complete all as specified and directed. Make :- Legrand Arteor series Cat Part No :- 573400 / Kolors (Krest-white) / Crabtree

M & L for Modular switch 2 way 6A, 1 Module complete all as specified and directed. Make :- Legrand Arteor series Cat Part No :- 573402 / Kolors (Krest-white) / Crabtree

M & L for Modular Switch 1 way 16/20 Amp 1 Module complete all as specified and directed. Make :- Legrand Arteor series Cat Part No :- 573410 / Kolors (Krest-white) / Crabtree

M &L for Modular Socket 6A 2/3 Pin universal 2 module complete all as specified and directed. Make :- Legrand Arteor series Cat Part No :- 573470 / Kolors (Krest-white) / Crabtree

M &L for Modular Socket 16A/ 6A 2/3 Pin combined 2 module complete all as specified and directed. Make :- Legrand Arteor series Cat Part No :- 573471 / Kolors (Krest-white) / Crabtree

M &L for Modular fan step regulator 100 watt 2 module complete all as specified and directed. Make :- Legrand Arteor series Cat Part No :- 573416 / Kolors (Krest-white) / Crabtree

M & L for Modular Bell push 6A 1 way, 1 Module complete all as specified and directed. Make :- Legrand Arteor series Cat Part No :- 573413 / Kolors (Krest-white) / Crabtree

Supply and fix for Bell musical type AC 230 Volts, as directed including connecting complete all as specified and directed.

M & L for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. Make : Anchor/Kolors/Crabtree/SSK

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. Make -Wipro cat part No.LL20-221-XXX-65NE3/Philips cat part no. BN O21C LED120S PSU CDL/NW GR(6500K) / HAVELLS

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. Make Wipro cat part no.LL20-111-XXX-65NE3/Philips cat part no. BN O21LED10S(6500K) / HAVELLS

S & F bulkhead fitting 10watt made die cast aluminum housing with complete assembly and PC opal diffuser suitable for surface/wall mounted dust and water resistant complete all as specified and as directed. Make: Wipro cat part no. LW07-141-XXX-57-XX /Havells/Philips

Taking down carefully (copper/aluminum) sub main wiring complete of any type (batten/surface conduit or concealed) for socket point or power point complete with all fittings such as switches sockets pendants etc complete and making good disturbed surface of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing/co0lour washing to match with the existing surface complete all as specified and directed

M&L Sub main wiring using PVC insulated and unsheathed multi stranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping of suitable size with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed of the following sizes of cables:-

Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire Note : 2 runs of 4sqmm copper cable & 1 run of 4sqmm copper cable including one run of 20mm PVC casing & caping shall be measured as one unit

Using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire Note : 2runs of 6sqmm copper cable & 1 run of 6sqmm copper cable including one run of 25mm PVC casing & caping shall be measured as one unit

Using two single core PVC insulated FRLS cable 2.5 sqmm copper conductor multi stranded and 2.5 sqmm copper conductor insulated cable using as earth wire Note : 2 runs of 2.5sqmm copper cable & 1 run of 2.5 sqmm copper cable including one run of 20mm PVC casing & caping shall be measured as one unit

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for for IP 43 & IP 54, single pole and neutral 250 Volts, flush to wall complete with IP 54 protection complete all as specified and directed.

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 12 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for IP 43 & IP 54, single pole and neutral 250 Volts, flush to wall complete with IP 54 protection complete all as specified and directed. Make : Legrand Model: IP 54 IK 09 507641 Ekinox or equivalent in L & T (Hager) / Schnieder (Multi-9).

M & L for distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 250 Amps rated copper busbar, 415 Volts within built MCCB 160 Amps, 10 KA, 01 ,new MCB SPN 32 Amp, 10KA -04Nos, MCB SPN 63Amp -04 Nos., 2neutral bar and 2 earth bar IP 54 protection, cable ties for cable management (Fully insulated busbar and shrouded neutral bars), reversible door for IP 43 & IP 54, flush mounted to wall complete all as specified and directed. Note : Rates are inclusive for flush (Concealed) mounted of DB, MCCB 160Amp TPN ,MCB SPN 32Amp and 63Amp. Make : Legrand Model: No.507750 Ekinox DPX 160MCCB IK-09 or equivalent in L & T (Hager) / Schnieder (Multi-9).

M&L for MCB single pole & neutral 240 volt C curve 10 KA (32 to 63) Amps capacity IP 20 complete all as specified and directed. Make - Legrand / Siemens / Hager

M&L for MCB single pole,5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed. Make - Legrand / Siemens / Hager

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire mm as 4.0mm dia by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no.3 including earth pit in PCC concrete 1:2:4 type B-1,Cast iron cover 10 mm thick hinged to CI frame, excavation and earth work in any type of soil and including protection pipe 15mm dia and water pipe GI tubing 20mm light grade with funnel and wire mesh connected to earthling test point complete all as specified and directed. Note: (i) Rates are inclusive of 7.5m long GI earth wire 4.0mm dia (ii) Rates of CI frame, RCC Pit cover, funnel and wire mesh included in the cost of item.

S&F building security in repair LED Light fitting 35 watt, system efficiency not less than 100 lumen / watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminum housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminum housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description complete all as specified and directed. Make :- Wipro, Cat part No LR02-291-XXX-57-XX or equivalent in Philips/ Wipro

Supply and fix in repair capacitor 2.5 MFD AC 230 Volt 50 HZ, for ceiling fans complete all as specified and directed.

Supply & Fixing 5 star rated electric storage water heater (vertical type) 25 Ltr, 230 V, AC, Single phase power input 2000w, standing loss in kWh 24 (hours) 45°C 0.511 kWh with and including connecting fastners nuts not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonary work for proper mounting of Geyser fastning bolts etc as directed as site reqmt and making necessary inlet and outlet water connection as well as electric connection including testing on load for entire satisfaction of Engineer-in-Charge. Make-Bajaj/Crompton/ Venus

Supply & Fixing GI pipe 15 mm bore medium grade with all fitting such as unions, tee, nipple, short lengthand socket for connecting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply & Fixing GI pipe 20 mm bore medium grade with all fitting such as unions, tee, nipple, short lengthand socket for connecting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F PVC connection nylon braided 15 mm size with PTMT nuts 450/600 mm long for hot/cold Water to and from geyser complete all as specified and directed. Make: Prayag / Shakti

S & F stop valve 15 mm bore heavy duty fancy type chromium plate with long sunk and cup connected in wall clamps as per site reqmt for cold water inlet & hot water outlet connection complete all as specified and directed. Make: Zoloto / Gem

S & F Bib cock 15 mm bore heavy duty fancy type chromium plate with long sunk and cup connected in wall clamps as per site reqmt for WHB purpose complete all as specified and directed. Make: Zoloto / Gem

M & L for cutting hole not exceeding 150 sqmm into through brick wall built in cement mortar or stone wall / RCC wall built in lime mortar / concrete for passing inlet pipe of geyser through walls or as per site reqmt all as directed including making good the disturbed surfaces.

Supply and fixing Anti-suicide fan rod 15mm dia, GI tubing medium grade 260mm to 450mm long as required fixed in replacement at site including minor works regarding the fixing of rod deemed inclusive in the quoted rate complete all as specified and directed. Make- Gold Life Anti Suicide Fan Rod

Supply and connection in repair PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete all as specified and directed. Make: Havells / Polycab / Finolex

DWARKADHISH ENTERPRISE

Sukhi Electricals

M/S Rajendra Constructions

Nirmal Construction

M/s SK Traders

jagdish machinery stores

SURESH ELECTRICALS