Providing Fire Fighting System at Judicial Court Complex at Ambala City in Ambala District

Amount

FIRE HYDRANT SYSTEM Supply , Installation , Testing & Commissioning of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints make hisar jindal ,tata, parkashsurya a) 100mm dia (DSR 7.7)

b) 80mm dia (DSR 7.6)

c) 25mm dia (DSR 7.1)

SITC two coat of 4 mm thick 'PYPKOTE' antirust protection including primer and lap of 25 mm on M.S. pipe in trenches or complete including surface preparation coating and wrapping shall be confirm to ISI 10221. MAKEPYPECOAT/COALTEK a) 150 mm dia (MINIMUM 6 MM THIKNESS) (DSR-6.2 )

b) 100 mm dia c class

SITC OF S.S. single headed ISI marked oblique pattern hydrant landing valves with 80mm dia flanged inlet & 63 mm dia female outlet complete with gun metal cap and GI chain twist release type plugh and all accessories as per IS : 5290-1983 Type A (For internal + external hydrant).(MAKE: FIRE CUT /NEW AGE / KARTAR/ MINIMAX / SAFEX ) (DSR- 9.2 )

SITC of INTERNAL OR EXTERNAL weather proof standard fire hose cabinet (750 mm x 600 mm x 250 mm deep) for yard hydrants made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish with " Fire Hose" marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe & nozzle spanner. (For external hydrant system) (MAKE: G.TECH / FIRE CUT / MINIMAX / NEW AGE/ SUPEREX / KARTAR ) (N.S)

SITC of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with S.S. male & female instantaneous type coupling (IS 903) (For internal hydrant system) (MAKE: / FIRE CUT /NEWAGE/ / MINIMAX/,KARTAR/ SAFEX (DSR- 16.2)

SITC OF 63 mm dia S.S Metal branch pipe with 12. mm nozzle confirming to IS 903.(MAKE: / FIRE CUT /NEW AGE/ KARTAR / MINIMAX / SAFEX ) (DSR - 18.2)

SITC of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 30 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 884 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Rate shall include 25 mm dia M.S. pipe connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required. (For internal hydrant system) ((MAKE: FIRE CUT / NEW AGE/ FIRE CUT / MINIMAX / KARTAR/SAFEX) (DSR - 17.1)

SITC OF ci+ gunmetal 4 way fire bridge connection with 150 mm butterfly valve 150mm non retrun valve and half encg gunmetal Valve & i/c 18 SWG panited M S Box 30x20x10 with MS framed front with glass panel and words ” FIRE BRIDGE INLT”painted in bold letter written on it in red colour as required. Make Minimax, FIRE CUT, KARTAR , NEW AGE, G TECH / SAFEX. (DSR - 19.2)

SITC of 200 mm dia 6.35 mm thick flanged end basket 300mm height of Y-type strainer made from MS body with bottom and top removable flanges with nuts, bolts etc having filteration area at least 6 times the cross sectional area of the pipe.MAKE-KARTAR/LEADER,NEW AGE ,SANT (DSR-15.4) 200mm dia

SITC OF Air vessel 250 dia x 1000 mm height with dish top made in 6mm thick ms pipe complete with 20mm dia brass air valve , 200mm dia stop valve , pressure gauge ,stop cock, nipple for terrace MAKE FIRE CUT / HYDROTECH. (DSR-20)

SITC OF Providing & Fixing of air vessel 450/1600 0mm dia,height with dish top made in 6mm thick ms pipe complete with 20mm dia brass air valve , 200mm dia stop valve , pressure gauge ,stop cock, nipple for fire control room MAKE FIRE CUT / HYDROTECH. (N.S)

Supplying and fixing orifice plate made out of 6mm thick stainless steel ( Grade 304 ) with orrice of required size to be fitted between flange & landing valve of external and internal hydrent to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required .MAKE-SANT,LEADER,KARTAR / SAFEX OR EQULENT (DSR - 13)

SITC of C.I. Butterfly valve conforming to IS : 13095 with flanges, nuts, bolts and washers complete for following sizes :- [PN 1.6 rating].MAKE-KARTAR,/ZOLOTO/ CASTLE,KIRLOSKAR, NEW AGE ,SANT ,NALISA OR EQULENT (DSR – 11) 150 mm dia (DSR- 11.6)

100 mm dia (DSR- 11.5)

80 mm dia (DSR- 11.4)

SITC OF CAST IRON NRV NON RETURN VALVE pn 1.6 WITH NUT BOLT AND FLINGES CAMPLETE IN ALL SENSE (CASTEL ,ZOLOTO ,KARTAR , SANT NEW AGE , NALISA OR EQUILENT) (DSR -14) 150 mm dia (DSR- 14.7)

80 mm dia (DSR- 14.4)

SITC of Pressure switch of approved make for Hydrant pump, jockey pump and Diesel Engine Driven pump including necessary wiring and cut off valve up to central panel & other material as described in specifications. MAKE -INDOFUS/DANFOS/SWITZER) (DSR - 22)

SITC of fire brigade draw off connection confirming to IS : 4038-1986 with 150 mm Non return valve/ strainer incluiding necessary fittings the word FIRE BRIGADE DRAW OFF to be painted on the box complete all as specified and directed.(MAKE: FIRECUT/KARTAR/ NEW AGE / MINIMAX) (N.S)

Providing, fixing, testing & commissioning of 100 mm dia Burden type, dial type pressure gauge (in Pump Room) including brass isolation valve and pipe having caliberation of 0-15 Kg/cm2. MAKE H.GURU/FIEBIG (N.S)

MECHANICAL/ELECTRICAL PUMPS-FIRE HYDRANT SITC Of Electric Driven Fire (terrace) pump of capacity 450 LPM 35 mtr . head with TEFC motor 2900 R.P.M 7.5 HP complete with coupling guard , base plate , SS SHAFET ,BRONZE IMPALLER anti vibration pad , foundation etc .MAKE- Mather & Platt , Kirloskar, (DSR- 4.2)

Providing And Fixing Of PVC Insulated Armoured Cable 11 Kv Grade Aluminium Conductor On Surface As Required MAKE -PLAZA ,NATIOAL G GILOSTER , Universal, ICC, FINOLEX OTHER ISI MARK a) 2 core x 1.5 sq .mm For pressure switch to fire panel (DSR - E &M 1.17.2 )

b) 3 core x 10 sq mm for terrace pump (DSR- E &M - 9.1.7)

Supply, installation, testing and commissioning of Installation Control Valve with Gong Bell Unit 150 mm with tapping, pipes Valves, interconnecting hoses and pipings complete as required to make it operational. MAKE - HD, OMEX , GETECH , NEWAGE (DSR - 24.3)

SITC OF DOL type fire pump panel suitable for 415 V+/-6 volts,panel shall be free standing floor mounting sheet metal enclosed dust and verming proof.Panel shall be provided with heat shrinkable sleeves and shall be coloour coded. The panel shall be suitable for cable entry from top or bottem. The minimum fault rupturing for all incoming and outgoing switch/ breakers shall be 35 KA. The panel shall be fabricated.Auto mannual Starters with change over system. MAKE (, FIRE CUT,HYDROTECH ) ( N.S )

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 22.181)

Damia Global Services Pvt Ltd