Construction of Dudh Ghar at Village Bhurapani Taluka.Ahwa, Dist. Dang.

It. Rate In

Specification and reference to book of Quantity Unit Amount

No. Figures

specifications)

1 Excavation for foundation upto 1.5 M depth 7.26 Cum. 125.86

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50 M lead (A) Loose or Soft Soil

2 Filling available excavated earth (excluding 3.63 Cum. 137.47

rock in trenches plinth, slides of foundations

etc. in layers not exceeding 20 cm in depth

consolidating each deposited layer by

ramming and watering)

3 Filling in foundation and plinth with murrum or 12.32 Cum. 304.60

including watering ramming and consolidating

etc. complete

4 Providing and laying cement concrete 1:2:4 7.02 Cum. 3824.11

(1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork in

(A) Foundation and Plinth (more than 10 ton)

5 Providing and laying controlled cement 1.63 Cum. 5000.41

concrete M.200 and curing complete the cost

of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass

concrete. (more than 10 ton)

6 Providing and laying controlled cement 0.20 Cum. 10449.55

concrete M-200 and curing complete

including the cost of form work but excluding

cost of reinforcement for reinforced concrete

work for Column upto plinth level.

7 Providing and laying controlled cement 2.17 Cum. 6507.63

concrete M.200 and curing complete the cost

of formwork but excluding reinforcement for

reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level.

(more than 10 ton

8 Brick work using common burnt clay building 0.72 Cum. 4279.99

brick having crushing strength not less than

35 kg/sq. cm. in foundation and plinth in

cement mortar 1:6 ( 1 Cement: 6 fine sand)

(B) Convention

9 Providng TMT bars renforcement of FE 500 / 817.46 kg 77.29

500D for R.C.C. work including bending

binding and placing in position complete for

all floor.

10 Providing and laying controlled cement 0.84 Cum. 10449.54

concrete M.200 and curing complete the cost

of formwork but excluding reinforcement for

reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level.

(more than 10 ton)

11 Providing laying controlled cement concrete 0.21 Cum. 10618.00

M 200 R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of

formwork but excluding the cost of

reinforcement

12 Brick work using common burnt clay building 12.45 Cum. 4575.58

brick having crushing strength not less than

35 kg/sq. cm. in super structure above plinth

level up to floor two level in cement mortar 1:6

( 1 Cement: 6 fine sand) (B) Convention for

13 Steel work, welded in built up sections 7.20 Qui 6747.09

framed work including cutting, hoisting, fixing

in position and applying a priming coat of red

lead paint. (D) In trussses and trussed purlins,

upto 25 M. span and 15 M. ovarall height.

14 Providing corrugated G.I. sheet of class-3 59.69 Cum. 734.19

roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete

excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

15 Providing and laying Machine cut, Free 6.30 sqmt 2535.71

edges, Machine polished Granite stone slab

18 mm thick Single Piece For doors and

Windows Cill and Jambs Cladding as per

design including Full moulded Round front

edge and 1 cm nosing and laid on 20 mm

thick cement mortar 1:6 (1 cement : 6 coarse

sand) and jointed with gray cement slurry

including rubbing and polishing etc. complete

(As per R.A.)

16 Providing and fixing flush door both sides 2.52 sqmt 4501.57

laminated andshutter fabricated from 35 mm

thick solid core malemine faced three layered

pre laminated flat pressed wood based

exterior grade bonded BWP/BWR synthetic

resin having stamped IS 12823 grade I type II

including three coats of lacquer polishing to

exposed wooden surfaces and Stainless steel

decorative type designs fixtures / fastening

2Nos. Handles, 2Nos. Aldropes, towerbolt

etc. as per architectural detailed drawing and

as directed by engineer in charge..

17 Providing and fixing window having extruded 4.32 sqmt 1591.88

aluminum Colour anodized section frame

main outer size 95mm x 24mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal Three track

member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size

Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x

18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with

mm thick transparent bronze colour tinted

float glass with powder coated aluminum

fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

18 Providing 15mm thick cement plaster in 75.04 sqmt 239.93

single coat on Rough (Similar)side of single or

half brick walls for interior plastering upto floor

two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand)

19 20 mm thick sand faced cement plaster with 52.14 sqmt 365.96

on wall upto all height above ground level

consisting 12 mm thick backing coat of c.m.

1:3 (1 cement : 3 sand ) and 8 mm thick

finishing coat of cm 1:1 (1 cement : 1 sand)

etc. complete.all height etc. complete

20 Providing and laying polished Kota stone 45.40 sqmt 1019.40

slab flooring over 20mm (Average) thick base

of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc.

complete. (A) 25mm thick

21 Finishing wall with water proofing cement 52.14 sqmt 122.14

paint of on wall surface ( Two coats) to give

an approved brand manufacture and of

requred shape even shade after throughtly

brushing of loose powered materials.

22 Wall painting (two coats) with plastic 75.04 sqmt 91.17

emulsion paint of approved brand and

manufacture with on undecorated wall surface

to give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth along ceilings and sloping

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be

written in figures and words) of the estimated rate mentioned above Amount of my / our tender works

*Estimated amount put to tender *Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ………........% Above

Net Rs. …………………….… Total Rs. ………….…….................

In words ………………….……………………………. In words ………………….……………………….

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed by

the Engineer – In – Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt

G.R.: PRC-10/2017 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where the reisa change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Deputy Executive Engineer Executive Engineer

Panchayat ( R & B) Sub Division Panchayat (R & B) Division

Ahwa Dang

Signature of the contractor