Tender for Labour charge with providing, Fixing of required spare parts and repairing, Overhauling, renovation and additional of 63/100/200/500KVA LT Distribution Box (200/400 AMP. Damage & burnt ACB) & New ACB Boxes at various Transformers location on ARC Basis under All Scheme for Sarigam Ind. Sub-Division under VAPI Ind. Division.

Sr 200 AMP 400 AMP

Name of Spare Parts

No Final Rate Final Rate

1 Mech. Main Tension Spring 37

2 Lever Spring 26

3 Bkt Phase Barrier 34

4 Action Rod With Insulator 337

5 Handle Dog with stud 337

6 Operating Handle 169

7 Profile Plate 323

8 Fixed Arcing Contact 195

9 Moving Arcing Contact 183

10 Profile Spring 32

11 Bus bar Supports 592

12 Operating Mech. Assly 3697

13 Sub-Assly Ferrules 155

14 Bkt. Insulation Pipe 74

15 Upper Fixed Terminal 351

16 Lower Fixed Terminal 364

17 Moving Contact Assly 445

18 Fixing Clamp 32

19 Thermal Relay Block 3220

20 Protection C.T. 403

21 C.T. Clamp 32

22 C.U. LINK 314

23 ARC Chambers 510

24 Bus Bar Channel 97

25 "S" Lever ARM With Stud 59

A.C.B. Boxes Size 900x600x400MM 16 SWG with two coat

26 colour & fixing clamp nut & bolt etc 5346

27 Do but 1100x650x400mm

TOTAL ESTIMATE COST RS

1 DGVCL will provide key material like MS materials, ABC/Bare conductors,

PSC/RSJ poles, Insulators, Fabricated materials etc. to the contractor.

File No: DGVCLDVPI/TEN/e-file/4448/2026/2572/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI

Letter No: DGVCLDVPI/0214/09/2026 Approved Date: 05-09-2026 05:54

2 All fabricated items shall be fabricated as per DGVCL approved drawing and

by welding rods confirming to the relevant ISI specification and as directed

by Engineer in charge

3 Necessary electricity connection for fabrication items shall be provided by

DGVCL on payment of required charge for connection & electricity bill of the

same shall be paid by the agency

4 All the rates are inclusive of PF and Exclusive of GST applicable time to time

Work to be carried out after issued of Sub work order by S/dn. Office not

6 All steel material are to be painted as below :

(A) Scrubbing of rusted surface properly before applying the paints on to the

RSJ poles & steel fabricated materials of RSJ/PSC poles is must require.

(B) Two coats of approved ISI mark red oxide (primer) is to be properly

painted for the RSJ poles & Steel fabricated materials of RSJ/PSC poles.

(C) Two coats of approved ISI mark Silver paint (i.e. triple mangoes or

equivalent quality silver paint) is to be properly painted on to the RSJ poles &

Steel fabricated materials of RSJ/PSC poles.

7 Submission of Bill for Supply/Purchase of KIT Cable Usage, with bifurcation

of Supply amount along with Labor.

8 Any material (XLPE / Aerial Bunch Cable, Joint Kit etc.) provided by

contractor is approved by DGVCL make, specification and submission of

Invoice with purchase bill.

9 The rates are inclusive of dismantling charges of existing bare conductor and

crediting in to store & dismantling of service lines from LT bare conductor

and to provide service connections on ABC by insulated pierce connectors

through service connection box.

10 The contractor has to collect all the required materials from DGVCL store as

well as credit the dismantle material to the DGVCL store at their cost.

11 Labour Wellfer Cess @1% shell be Deduction in Bill Amt.

EXECUTIVE ENGINEER (O&M);

DGVCL; VAPI IND DIV.

File No: DGVCLDVPI/TEN/e-file/4448/2026/2572/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI