O/M of sewer line and MSPS/SPS at Expressway (Shifting of Pressure Rising main line from IPS-4 to IPS-3 Due to Construction of Under Pass at Chanage 6.10 Km Near Sec.108 LHS Noida Gr. Noida Expressway) Noida

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : bituminous road

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 1.5m, as directed by E/I. The Contractor has to detect different utilities like sewer line, water supply line, Electric cable, Telephone cable, Gas Pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer in Charge All kinds of soil. (up to 1.50 Mtr. )

Extra for every additional lift of 1.5m or part there of in excavation /banking excavated or stacked materials.All kinds of soil.Earth work (1.50 Mtr. To 0.60 Mtr. .

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes (DI) conforming to IS : 8329 : 700 mm dia Ductile Iron Class K-9 pipes

P/F M.S. specials such as Tee , Bends , Collars , Tapers, Gap pieces,including Flange Ends as required , Painting ,Cutting, welding as per site requirement of MS pipe thickness etc complete in all respect as per direction of E/I.

P/F C.I. double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete (the tail pieces tapers etc. if required witll be paid separately) a) 80 mm dia.

Hiring of Generator set (Including Service cost of operating staff, supply of lubricating oil and diesel also) D.G. Set/Generator of 63 KVA

Hiring of Welding Set Running Time @ 6 Hrs/Day (Including Service cost of operating staff, supply of suitable electrodes etc).

Hiring of Gas cutting set with oxygen and LPG Running time @ 6 Hrs/Day (Including Service cost of operating staff, supply of necessory items as oxygen & LPG etc).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as perdirection of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/ cum.Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5 m. same earth work

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).

Please Enable Macros to View BoQ information

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

TENDER REFRENCE No. - 08/SM(JAL-OA)/25-26

Name of Tenderer

TOTAL NIT COST OF PROJECT Excluding Labour Cess (In Rs.) (In lacs)

Minimum Value

SOLVENCY (Issued within a period of minimum six months).

EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited

NOT QUALIFIED

NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender

NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender

RESULT OF EXPERIENCE

TRUN OVER DETAIL (DURING THE IMMEDIATE LAST 3 CONSECUTIVE FINANCIAL YEARS) WITH NOATRY)

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive financial years.

TECHNICAL STAFF ON Rs. 10 AFFIDAVIT (AFFIDAVIT MUST BE BOTH SIDE SCAN IN PDF.)

TOOLS & MACHINERY ON Rs. 10 AFFIDAVIT (AFFIDAVIT MUST BE BOTH SIDE SCAN IN PDF.)

Character certificate of Indivisual / Partners / Directors issued from District Magistrate

AFFIDAVIT OF NOT BLACK LISTED (AFFIDAVIT MUST BE BOTH SIDE SCANE IN PDF.)

Address Proof/Id. Proof of indivisual/ partners/ directors.

RESULT

Filled in from capability Statement

Certified Copies of relevant pages of following documents

Notarised Affidavit for No Blood Relation is Noida Authority on Non Judicial Stamp paper of Rs.100/- as per Appendix ‘E’

Note- If tender value is ten lacs and below ten lacs then above condition No. 01, 02 & 03 will not applicable