PROVN OF AC POINTS IN SMQ AT AF STN WADSAR, SPECIAL REPAIR/REPLACEMENT OF LED LIGHTS IN PLACE OF OLD UNSERVICEABLE FONTAIN LIGHT AND HALOGEN LIGHTS ALONGWITH CONNECTED ITEMS AT AF STN WADSAR AND PROVN AND INSTALLATION OF FOUNTATION LIGHTS AND ALLIED

Amount

M & L for Ring service for dome fountain complete all as specified and directed.

M & L for Ring service for dome fountain with cluster Jet complete all as specified and directed.

S & F 1.5 HP Submersible pump Klassic ISI for dome fountain with cluster Jet complete all as specified and directed

S & F 2 HP Submersible pump Klassic ISI for dome fountain complete all as specified and directed

S & F RGB LED lights 12 watt / 12 volt for fountain complete all as specified and directed.

S & F RGB controller and SMPS (10 amp / 12 volt ) complete all as specified and directed.

M & L for Ring supportings stand 1 fit to 1.5 fit height complete all as specified and directed.

M & L for Electrical wiring inside the fountain tank for light 0.5 Sqmm 4 core for dome fountain with cluster Jet tank complete all as specified and directed.

M & L for Electrical wiring inside the fountain tank for light 0.5 Sqmm 4 core for dome fountain tank complete all as specified and directed.

M & L for misc items elbow, tees, couppling and pipe of dome fountain with cluster Jet complete all as specified and directed.

M & L for misc items elbow, tees, couppling and pipe of dome fountain complete all as specified and directed.

Supply Installation and commission and testing and labaour charge of dome fountain with cluster Jet complete all as specified and directed.

Supply Installation and commission and testing and labaour charge of dome fountain complete all as specified and directed.

M & L for 1 inch cluster jet Brass 4.00 mm jet oriface of fountain complete all as specified and directed.

M & L for DOL starter 1/2 HP motor complete all as specified and directed.

S & F in replacement of LED bollard in rectangular shape victrian design with opal acrylic diffuser and IP 65 protection complete all as specified and directed. Make : Bajaj Cat No BGBOS 650 9W LED WH or equivalent as approved by GE.

S & F in replacement of LED post top (Smart G-3 type) with decorative circular design compiant to dark sky norms with polycarbonate opal diffuser and IP 65/IK-10 protection installed with suitable dia and 5 to 7 feet length powder coated metal pipe complete with all fixing arrangement complete all as specified and directed. Make : Philips Cat No BGP161 LED2300/WW PSU 220-240V 7043 or equivalent as approved by GE.

S&F in replacement PVC wire 1.5 sqmm 3 Core PVC insulated cable copper drawn through PVC conduit from light fitting terminal complete all as specified and directed.

S&F in replacement of looping box (enclosures) of size 230 x 170 x 110 mm made of PVC comprising of 02 Nos bus bar 100 Amps rating fixed on porcelain insulators, earthing terminal and one MCB SP 6/16 Amp including MS bracket, nut an bolts complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out soft/ loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm complete all as specified and directed.

Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neaoprene 'O' ring of 38 MM inner dia (for protection of 25/16 Sqmm UG cable) complete all as specified and directed.

Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neaoprene 'O' ring of 75 MM inner dia (for protection of 185 Sqmm UG cable) complete all as specified and directed.

Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neaoprene 'O' ring of 63 MM inner dia (for protection of 150/120 Sqmm UG cable) complete all as specified and directed.

Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neaoprene 'O' ring of 50 MM inner dia (for protection of 95/70/50 Sqmm UG cable) complete all as specified and directed.

Supply and laying or fixing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) cable aluminium conductor, 1100 volts grade with standed complete all as specified and directed for 10 sqmm, 2 core nominal cross section in service connections Including taking down old u/s cable complete all as specified and directed.

All as per item No 27 here in before but of cable size 16 Sqmm, 2 core.

M & L for boring of holes up to 50 mm dia under road pavement, hard standing, etc by trench- less technology using ultra sound technique complete all as specified and directed by Engineer-in- charge. Note:- Pipe for protection of cable shall be measured and paid separately.

Supply & Fixing in replacement of NATURE SWITCH-02 (sensor along with pre-dawn switching off timer, 4-8 hrs) & NS-INDOOR (sensor for Lux level based switching of outdoor/semi-indoor lights) complete all as specified and directed.

Supply and fixing in replacement of RGB/RGBW flood light 75 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S & F in replacement OTS down wall light 10 watts multi clour having 03 beams rays down and up sidesuitable for wall complete all as specified and directed.

Supplying and laying XLPE insulated, PVC sheathed, armoured, heavy duty, aluminium conductor LT, 1100 Volts grade UG cable fixed on walls/laying in trenches/or passing through road/floor complete testing and connection using switable size of copper lugs end to end at site complete all as specified and directed by Engr In Charge for the following sizes: - 16 Sqmm 4 core

All as per Item No 33 here in before but 25 Sqmm 3.5 core

All as per Item No 33 here in before but 50 Sqmm 3.5 core

All as per Item No 33 here in before but 70 Sqmm 3.5 core

All as per Item No 33 here in before but 95 Sqmm 3.5 core

All as per Item No 33 here in before but 120 Sqmm 3.5 core

All as per Item No 33 here in before but 150 Sqmm 3.5 core

All as per Item No 33 here in before but 185 Sqmm 3.5 core

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6.3mm burried directly in ground level with teop edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanised iron strip 25 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No.3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforce with welded steel wire babric (APM) weight not less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified and directed.

Supply, install, testing and commissioning weather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type canopy top factory lock front and back opening totally enclosed made out of 3.15 mm thick sheetmetal enclosure of suitable size with angle iron frame of MS angle 40 X 40 X 5 mm upto 1.5 mtrs length from ground level duly powder coated of 600(W) X 900(H) X 400 (D) mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and side locking arrangement consisting of sufficient Nos of circular cables entrly holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc. inside the enclosure, the required Nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15micron) grey hammer tone with one coat of including connecting with L.T armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium and LT panel should be CPRI approved and factory fabricated complete all as specified and directed and consisting of the following:- (i) MCCB 125 Amp 4 Pole (AC 415 Volt), 16 KA - 01 No (ii) 63 Amp MCB TPN, 415V 10 KA - 04 Nos, (Out going) (iii) Aluminum bus bar 200 Amp - 01 set (iv) Indicator LED lamp RYB - 01 Set (v) Internal wiring with copper conductor incl necessary lugs and thimbles - 01 Job (vi) Space for 02 Nos of spare MCB

Supply and fixing MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed.

M&L for concealed sub main wiring of two run with 4.0 Sqmm single core PVC insulated, FR flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases where required including one run of 4.0Sqmm single core PVC insulated, FR, flexible copper cable as earth continuity conductor in green color complete all as specified and directed.

S& F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fixing SPN 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) with PVC mounting box complete all as specified and directed.

TECH SERVE SOLUTIONS

TRIMURTHI ENTERPRISES

ALBA AC AND REF SERVICES

Abhishek Enterprises

Ramdev and Sons