KMDA/GAP/SE(N)/NIQ-02/2024-25

Amount

Supplying, fitting & fixing of Executive Engineer's Main Table with Drawer. DIMENSIONS: 2350x2350x750 mm (W X D X H). Primary Work Surface : 2350 X 1300 X 750 mm (WXDXH) Made of 25 mm thick MDF-one side prelaminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Softclosing access flap with in build power box are provided on work surface for wire management. Secondary work surface: 1050 x 500 x 750 mm (WXDXH). Made of 25 mm thick MDFone side pre- laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Modesty Panel:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Desk Ped : 430 x 800 mm (WxD). Made of 1 mm thick artificial-leather glued on 1.2 mm thick. Stationary Holder : 150 x 320 mm (W xD). Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm. Understructure : Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,Edge banded with matching 2 mm thick PVC lipping. Make in India product. Integrated Pedestal: 750 X 472 X 500 mm (WxDxH). Made of 25 mm thick pre laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF-one side pre-laminate board confirming to IS 14587:1998 eith 0.4 mm PVC membrane pressed on to top. Pedestal construction is BOX-BOX-FILE type which uses powder coated 400 mm long metal panel drawe slides. Drawer extension is 325 mm. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with central lock for security. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying, fitting & fixing of Executive Engineer's Main Chair. The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. High BACK SIZE: 47.7 cm. (W) x 76.4 cm. (D) The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. The adjustable tilting mechanism is designed with the following features:360' revolving type.Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.Tilt tension adjustment can be operated in seating position.5-position Tilt limiter giving option of variable tilt angle to the chair.Seat/back tilting ratio of 1: 2The mechanism housing is made up of HPDC Aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm. Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors (W)76.1*(D)76.1*(H)112.7-130.2 Seat Height 43.1-53.1cm. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Asst. Engineer Main Table. Dimension : 1650 x 900 x 728 mm (WxDxH) Worksurface:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Modesty Panel:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Rectangular Frame:Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). Make in India product. Leg:Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester). CPU Modesty: 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Plastic Cap for Cable travel:Injection Moulded Polypropylene.Leveler glide for Leg:Nylon 6 & MS Bolt.Pedestal:Shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester).Drawer Tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). Drawer Front:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Frame Assembly 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Lock 10 Lever Cam Lock.Handle Injection Moulded Polypropylene.Leveller Nylon6 & MS Bolt.Horizontal Wire Carrier: 0.7mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Vertical Wire Carrier:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying, fitting & fixing of Asst. Engineer's Main Chair. 1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area BACK SIZE 47.5 cm. (W) x58.0 cm (H), SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). 2.. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. 5.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6.TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7.PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon.Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying,fitting & fixing of Jr. Engineer Main Table. Dimension : 1200 x 600 x 728 mm (WxDxH) Worksurface:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Modesty Panel:18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Rectangular Frame:Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). Make in India product. Leg:Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester). CPU Modesty: 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Plastic Cap for Cable travel:Injection Moulded Polypropylene.Leveler glide for Leg:Nylon 6 & MS Bolt.Pedestal:Shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester).Drawer Tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). Drawer Front:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Frame Assembly 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Lock 10 Lever Cam Lock.Handle Injection Moulded Polypropylene.Leveller Nylon6 & MS Bolt.Horizontal Wire Carrier: 0.7mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).Vertical Wire Carrier:0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester). Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying, fitting & fixing of Jr. Engineer's Mid Back Chair. The seat assembly is made up of 1.2 cm.thick hot- pressed plywood,upholstered with fabric upholstery covers and moulded polyurethane foam.Seat size:47.0 cm. (W) x 48.0 cm. (D).The back asembly is made of powder coated tubular frame of dia 25.4 mm x 2.0 mm thk MS ERW tube designed with contoured lumbar support for extra comfort.The back is upholstered with net fabric upholstery.Back size:46.5 cm. (W) x 64.5 cm. (H).The one-piece armrests are injection moulded from black Co-polymer polypropylene.The mechanism is designed with the following features:360° revolving type. Make in India product. Upright position locking.Tilt tension adjustment.The pneumatic height adjustment has an adjustment stroke of 9.0 cm.The pedestal is injection moulded in black 33% glass-filled nylon 66 and fitted with 5 nos.twin wheel castors.The pedestal is 66.3 cm pitch-center dia.The twin wheel castors are injection moulded in black nylon.The bellow is 3 piece telescopic type and injection moulded in black polypropylene. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying, fitting & fixing of Jr. Engineer's Visitor Back Chair.The seat made from 1.2mm.thk.hot pressed plywood and back injection moulded from black Co-polymer Polypropylene are upholstered with fabric and moulded Polyurethane foam together with seat and back covers.The back foam is designed with contoured lumber support for extra comfort.Size:Seat size:-45.0cm (W)X42.0cm(D) Back size:-39.0cm(W)x38.0cm(H).The seat and back covers are injection moulded in black Co-polymer Polypropylene.The fixed type mechanism is 360' revolving type without tilt.The frame is made up of 64cm(1)x14bg.M.S.E.RW.tube which is black powder. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

Supplying, fitting & fixing of Computer Table. Table size shall be 900 Width x 590 Depth x 750 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be sq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. Complete as per direction of Engineer in charge. Manufacturer should have in house test certificates, Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2019 Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. All ISO Certificates should be NABCB accredited. All the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.

DESIGN-M

KOLKATA INTERIORS PRIVATE LIMITED