Work

Amount

A) Supply of Materials

1) TOWERS :

i) Fabrication, Galvanizing and Supply of 132 KV DC Towers Including Stubs, Extension and Stub - Setting Template as per Drawing & BOM Location No. 8 (A+0) to 9 (A+0), [Section Tower No. 5 (B+0) to 13 (C+0)]

ii) Hot Dip galvanized Hexagon Head Transmission Tower Bolts with Suitable Nuts & Washers for above Structures as per BOM.

2) OPGW Joint Box 24 F

3) Hardware Set for 24F OPGW

4) Compression type Double Tension fittings Assembly suitable for ACSR Panther conductor as per Technical Specifications and drawings/sample.

5) Compression type Single Tension fittings Assemblysuitable for ACSR Panther conductor as per Technical Specifications and drawings/sample.

6) Single Suspension fitting Assembly suitable for ACSR Panther conductor as per Technical Specifications and drawings/sample.

7) Stock Bridge Vibration Damper (4R type) suitable for ACSR panther conductor as per Technical Specifications and Drawing/sample.

8) Mid span compression joint suitable for ACSR panther conductor as per Technical Specifications and Drawing/sample.

9) Repair Sleeves suitable for ACSR panther conductor as per Technical Specifications and Drawing/sample.

10) D-Shackle

11) Copper bond dia 12 mm, length 570 mm

12) Supply of Phase plates in the sets of (both sides enamelled) Red,Yellow,Blue colour Circular disc of dia 100 mm duly made of 16 S.W.G Sheet with provision of 01 No hole for fixing along with 16x40 mm bolts, nuts & washers as per Technical Specifications and drawing/sample

13) Supply of Danger Plates in the size of 380 mm X 250 mm duly made of 16 SWG M.S Sheet with provision of 02 No hole for fixing along with 16x40 mm bolts, nuts & washers as per Technical Specifications and drawing/sample.

14)Supply of Number Plates in the size of 165 mm X 150 mm duly made of 16 SWG M.S Sheet with provision of 02 No hole for fixing along with 16x40 mm bolts, nuts & washers as per Technical Specifications and drawing/sample.

B) WORK ASSOCIATED WITH CONSTRUCTION OF NEW LINE PORTION AND INTERCONNECTION WITH EXISTING LINE INCLUDING NECESSARY DISMANTLING :

i) Construction of new Line portion and Interconnection with existing Line :

1) Survey & profiling

2) Check Survey & Peg marking

3) Excavation of foundation for tower after necessary approval of type of Foundation

4) Stub setting of DC type Towers

5) Concreting of foundation using cement, Mixture in the ratio of 1:2:4 with 20 mm Stone metals for Chimney & 40 mm Stone metals for Pyramid/Slab portion including cost of meterial, dewatering, sorting Shuttering, Forming, Curing etc. for Towers.

6) Installation of steel reinforcement of concrete foundation including cost of steel bars, cutting , bending & placing etc.

7) Erection of towers including proper tightening, fixing of number plates, phase plate & danger plates, bird guard etc.

8) Tack welding of bolts & nuts up to 2nd section (per bolt)

9) Earthing of tower with pipe type earthing including cost of Pipe type Earthing materials & Labour.

10) Stringing of ACSR Panther Conductor in all Phases of both Circuits (06 Phases) including Laying, Stringing, Tansioning, Clamping etc.of Conductor with associated Insulators alongwith necessary shifting of all materials i.e Conductors, Insulators, Tension Fittings Suspension Fittings, Vibration Dampers from store to Line Site & from Section Tower to Section Tower and jumpering between Section Towers.

11) Laying, Stringing, Tensioning, clamping,of OPGW wire including associated Tension fittings Vibration Dampers etc. between Section Towers alongwith shifting from store to Line site and from Section Tower to Section Tower. jointing etc.

12) Shifting of all required material from UPPTCL to site store including loading, unloading , carriage and Stacking at site store.

ii) Dismantling of old section of the line and other associated works.

1) Dismantling of ACSR Panther Conductor including de-hoisting of all the 6 Phases between Section 5 to 13.

2) Dismantling/de-hoisting of OPGW between Section 5 to 13

3) Safe dismantling of DA type Tower (04 Nos).

4) Transportation of dismantaled Tower parts, Conductor/ OPGW, Insulators, Hardware Fittings etc. from Line unloding & stacking at storage place at 132 KV S/S Rahimabad, Lucknow (Approx. distance 40 KM for 20 MT).

YASHRAJ CONSTRUCTION PRIVATE LIMITED

Umawala Engineers Pvt. Ltd.