PETTY REPAIR/DAY TO DAY MAINT WORKS INCL REPAIR/REPLACEMENT TO JOINERY, PLUMBING, SANITARY, ROOF, PLASTERING AND OTHER ALLIED CONNECTED BLDG REPAIR WORKS IN AREA IV-A AND OTHER AREAS MD ACCN OF AGE B/R-I(N), AMBALA CANT

Amount

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engineer-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs material like sand, cement & aggregate to make it functional complete all as specified and directed by Engineer-In-Charge. Note : Any items required to be replaced or major repair shall be paid under respective items.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Emgr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

M&L 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces of any description finished even and smooth without using extra cement including taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L 15mm thick rendering in cement mortar 1:4 on other than fair faces of brick or concrete surfaces of wall/ roof any description finished even and smooth without using extra cement incl taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L rendering 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces on ceiling incl taking down cement or cement lime plaster of any description on concrete ceiling surfaces etc including hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L preparing of new surface of walls, plastered or unplastered applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

M & L complete removal of existing treatment and applying two coats of oil emulsion distemper including avg 2mm thick wall care putty in two or more coats to achieve smooth surface complete all as specified and directed by Engineer-In-Charge.

M&L preparing new surface of ceiling, plastered or unplastered and applying three coat of white lime wash on undecorated surface of ceiling complete all as directed by Engineer -in - charge

M&L preparation of old decorated surfaces of ceiling and applying one coat of white lime wash complete all as specified and directed by Engineer-In-Charge.

M&L preparing of new surface of walls, plastered or unplastered and applying two coat of cement base paint, white or tinted complete all as directed by Engineer -in - charge

M&L preparing old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed by Engineer-In-Charge.

M & L brickwork with subclass ‘B’ bricks old size , straight or curved on plan exc 6m mean radius in built cement mortar 1:6 incl Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing (in repair) steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, guard bars and painting etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 and TD-220 sheet 1/3 to 3/3 as applicable complete all as specified and as directed by engineer in charge. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh shall be measured and paid for separately.

S&F box type ventilators glazed/gauged including MS grills of square section 8mm dia @ 100 c/c complete with glazing bars, dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer incl taking down exisitng ventilators complete all as specified and directed by Engineer-In-Charge.

S & F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe410-W(Gde E-250 quality-B) incl incl taking down exisitng chowkhats of any size or description complete all as specified and as directed by the Engineer-in-Charge

S & F 1.25mm thick mild steel, plain & black sheet in wall cladding, steel gates and similar work; cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required complete all as specified and as directed by the Engineer-in-Charge

S & F factory made 35mm thick, 2nd class HW, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated incl taking down shutters of any description or size complete all as specified and as directed by the Engineer-in-Charge

S&F factory made 35 mm thick, 2nd class Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats incl taking down shutters of any description or size complete all as specified and as direced by the Engineer-in-charge. Note:- wood used in this item shall be kilnseasoned and chemically pressure treated

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing incl taking down exisitng chowkhats of any size or description complete all as specified and as directed by the Engineer-in-Charge

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete including taking down of old shutter of any descriptions and size all as specified and as directed by the Engineer-in-Charge.

S & F 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by the Engineer-in-Charge

Description same all as per item Sr No 1.22 as above but in repair, complete all as specified and directed by Engineer-In-Charge.

S & F butt hinges 100 mm long medium weight cold rolled miled steel and fixed complete all as specified and directed by Engineer-In-Charge.

Description same all as per item Sr No 1.24 as above but in repair,complete all as specified and directed by Engineer-In-Charge.

Supply and fixing for 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys complete all as specified and as directed by the Engineer-in-Charge.

Description same all as per item Sr No 1.26 as above but in repair, complete all as specified and directed by Engineer-In-Charge.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge

Description same all as per item Sr No 1.28 as above but in repair, complete all as specified and directed by Engineer-In-Charge.

S & F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.

Description same all as per item Sr No 1.30 as above but in repair, complete all as specified and directed by Engineer-In-Charge.

Supply and fixing 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plate complete all as specified and as directed by the Engineer-in-Charge

Description same all as per item Sr No 1.32 as above but in repair, complete all as specified and directed by Engineer-In-Charge.

M&L 2nd class hard wood Small fitting such a brackets of any type ,latch and hinge block , shaped door and window stops and the like including all necessary labours articles n. exc 200 Cu cm each complete all as specified and directed by Engineer-In-Charge.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 or Gde E-165 complete all as specified and as directed by the Engineer-in-Charge

M & L providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

S & F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvalinised wire staples complete all as specified and as directed by the Engineer-in-Charge

S& Fixed in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire stapple, or complete all as specified and as direced by the Engineer-in-charge.

M & L sheet glass 3.0mm thick in repair, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane incl hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out glazing pins/springs clips complete all as specified and as directed by the Engineer-in-Charge.

M & L sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge.

S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair decorative type 25 mm dia MS powder coated curtain rod complete with fancy type caps and end brackets complete all as specified and directed by Engineer-In-Charge.

M&L prepration of new wooden surface and apply two coat of synthetic enamel paint over a coat of pink primer surface of any description , not otherwise described over 10cm width or girth complete all as specified and as directed by the Engineer-in-Charge.

M&L prepration of old wooden surface and apply two coat of synthetic enamel paint of any description , not otherwise described over 10cm width or girth complete all as specified and as directed by the Engineer-in-Charge.

M&L preparation of new steel surface and applying two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer on steel or iron surfaces of description over 10cm in width or grith, not otherwise described complete all as specified and as directed by the Engineer-in-Charge.

M&L preparation of Old steel surface and applying two coat of synthetic enamel on steel or iron surfaces of description over 10cm in width or grith, not otherwise described complete all as specified and as directed by the Engineer-in-Charge.

M & L running welding in repairs, Thickness of metal to be welded N exc 6mm, complete all as specified and as directed by the Engineer-in-Charge.

S & F In repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and as directed by the Engineer-in-Charge.

M&L 16 to 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with nails for kitchen cupboard and cabinet ,self for cupboard , frame with door if required including 3mm thick 2nd class hardwood leeping patti on cut edge of boards in repair complete all as specified and directed by Engineer-In-Charge.

S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified and directed by Engineer-In-Charge.

S&F 100mm long fancy type Brass handles, cast type, polished bright complete all as specified and directed by Engineer-In-Charge.

S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed by Engineer-In-Charge.

M&L taking down shutters of any description exceeding 1 square metre and n. exc 2 Sqm each and refixing in the same opening complete all as specified and directed by Engineer-In-Charge.

M & L 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

M & L 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

M & L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair vitreous china wash hand basin flat back white in colour with pedestal ISI marked of size 550mm x 400mm with brass chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 complete all as specified and directed by Engineer-In-Charge.

S & F in repair waste coupling fittings 32mm dia of brass, chromium plated for glazed ware sink, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and as directed by the Engineer-in-Charge.

S & F in repairs of fancy type Pillar Tap of 15mm bore brass, chromium plated, with capstan heads, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair Swan Neck, Left Hand Operating Knob Pillar Tap of 15mm bore brass, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S/F in repair WHB mixer brass chromium plated for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specified and directed by Engineer-In-Charge.

S/F in repair wall mixer brass chromium plated for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and directed by Engineer-In-Charge.

Supply and fixing in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including lime concrete bedding and making good to floor complete all as specified and as direced by the Engineer-in-charge.

Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and making connections to drain pipe and flushing pipe complete all as specified and as direced by the Engineer-in-charge.

Supply and fixing plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engineer-In-Charge.

S&F in repair jet spray brass CP with flexible pipe complete all as specified and directed by Engineer-In-Charge.

Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC 32 mm dia for low level cistern, making connections complete all as specified and as direced by the Engineer-in-charge.

S & F in repairs of 15mm bore fancy type stop valve brass, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs 15mm bore Stop valves, brass chromium plated with long shank and cup (conncelaed type) screwed down, high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as direced by the Engineer-in-charge.

S&F 15mm bore angular cock of brass chromium plated, with long shank and cup screwed down, high pressure, with crutch or butterfly handle screwed both endsfor iron pipe or for unions complete all as specified and directed by Engineer-In-Charge.

S & F in repairs of 15mm bore fancy type stop valve brass, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 15mm bore fancy type Bib taps, brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direced by the Engineer-in-charge.

S&F in repair 15mm bore fancy type Bib taps long body brass chromium plated, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direced by the Engineer-in-charge.

S/F in repair brass chromium plated hand health faucet with 8mm dia one metre long flexible tube and wall hook complete all as specified and directed by Engineer-In-Charge.

S & F in repair 15mm bore PVC connections with PTMP nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge

S&F in repair PVC waste Pipe 32/40mm dia of standard length for WHB and sinks and fixed complete all as specified and directed by Engineer-In-Charge.

S&F in repair brass CP Soap dish 100mmx50mm complete all as specified and directed by Engineer-In-Charge.

S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints incluidng brass chromium plated arm of standared length complete all as specified and as direced by the Engineer-in-charge.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge

S&F in repair Kitchen plate rack of steel 1mm thickness size 900 x 900x 250mm Ofof weight not less than 8 Kgs complete all as specified and directed by Engineer-In-Charge.

S & F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers, wastes pipe and brass chromium plated waste coupling in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge.

S/F in repair fancy type cabinet mirror of size 450x 600mm box type complete all as specified and directed by Engineer-In-Charge.

S & F in repair shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and as directed by the Engineer-in-Charge

M & L in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete incl dismantling water tanks exc 250 but not exc 500 Litres, and removing to store, all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete incl dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store, all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.

S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls incl taking down exisitng pipes complete all as specified and as directed by the Engineer-in-Charge

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls incl taking down exisitng pipes complete all as specified and as directed by the Engineer-in-Charge

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed by Engineer-In-Charge.

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and directed by Engineer-In-Charge.

M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate, fnished even & fair as in sub base of floor including Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-In-Charge.

M&L Non Skid coloured ceramic tiles premium /1st quality 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick screed bed in CM 1:6. incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by engineer in charge.

M & L Glazed Coloured Ceramic tiles premium/1st quality 7mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm thick in dado/skirting set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10 mm thick cement plaster in cm 1:4 incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the En

M & L providing PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, precast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 incl Demolition cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

M & L mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.

Excavating in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-In-Charge.

M & L concrete bed in PCC 1:3:6 type C2 (using 20 mm graded crushed stone aggregate) to drain pipes including packing under,and haunching against the sides of pipes, after they are laid and tested for 100 mm dia (internal) PVC (SWR) pipes complete all as specified and directed by Engineer-In-Charge. (Pipes shall be measured & paid separately).

M & L 100 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl taking up or down existing pipe complete all as specified and directed by Engineer-In-Charge.

Returning filling in including spreading levelling and watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-In-Charge.

Removing excavated material exc 250 m but n exc 500 m distance and depositing complete all as specified and directed by Engineer-In-Charge.

M & L cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc tank exc 250 Ltr and N exc 500Ltr complete all as specified and as directed by the Engineer-in-Charge.

Supplying and fixing door rubber (4" wide) in wooden shutters including nails etc complete all as specified and as directed by the Engineer-in-Charge.

Cleaning of sewage line upto first man holes blockage of WC, EWC, Bathroom, floor trap of WHB/Kitchen pipe etc complete all as specified and directed by Engineer-In-Charge.

Cleaning of sludge from the manholes by taking out loose sediment sand,girt,ash,sludge water, rags ,fibres or vegetation from including removal of sludge/debris to a distance exc 250m but n exc 500m and buried under ground complete all as specified and directed by Engineer-In-Charge.

Shiv Construction Co.

RAJINDER KUMAR AND ASSOCIATES

Ashwani Kumar

dhingra builders