8459/E8 SPECIAL REPAIR OF OR MD ACCN BLDG NO T-178 (08 QTRS) AND ADDN / ALTN TO SECURITY WALL FROM TCP NO 1 TO OLD CHURCH APPROX AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc.

M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified

M&L for two coats of exterior weather coat anti dust paint incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of exterior weather coat anti dust incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L two coat of oil bound distemper on ceilling including preparation of new plastered surface and complete all as specified

M&L preparing Old plastered or unplastered surfaces of ceiling and applying two coat of oil bound distemper on old decorated surface of ceiling complete all as specfied and direcetd.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S & F of 200 mm long stainless steel grade 304 barrel barrel tower bolts and fixed as specified and as directed.

S&F 100 mm long butt hinges, 3.00 mm thick (minimum) stainless steel grade 304 with SS hinge pin and fixed complete all as specified and directed.

S&F 150 mm stainless steel grade 304 handles 3.00 mm thick (minimum) complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

S& F pressed steel frames 105X60 mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate,etc, complete all as specified supplied and fixed

S& F pressed steel frames 125X60 mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate,etc, complete all as specified supplied and fixed

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 0.90 mm thick decorative face laminates on front side and 0.50 mm thick plain colour laminates on other side as approved complete.

S&F 300mm long stainless steel grade 304 sliding door bolts, bolt or clip type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass , gauze etc (without sash bars) , edges of framing plain , chamfered or rounded , fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) , supplied and fitted to chowkats.

Dismantling boarding any size and description fixed in any position with nails

S&F 20mm thick PVC boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F for built in steel cup board with pressed steel frame of size 75 mm x 45 mm x 1.25mm thick with preseed steel shutter 1 mm thick Godreg pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of ref oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame and shutter and making god disturbed portion in cm 1:3 or pcc 1:24 complete all as specified.

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down steel/wooden window/ventilator of any size and description complete.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S&F rates, include for anodised aluminium hard ware as indicated, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames.

Refixing of framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and similar work conforming to Fe410

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and similar work conforming to Fe410

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for

M&L for cement concrete (1:5:10) type E-2 as in foundation filling and mass concrete

M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed

Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge

M&L for rendering 15mm thick on roof surfaces in CM 1:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises

M & L Glazed ceramic coloured tiles in vertical surface 450 x 300/600x300x 8-9mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exc 0.12 sqm but n exc 0.36 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for polished glazed vitrified light shade double charged coloured ceramic tiles 7-8 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for polished glazed vitrified light shade double charged coloured ceramic tiles 7-8mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified and directed

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

Taking down old 110/75 mm bore PVC(SWR) pipes in any position

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 75 mm bore. PVC (SWR) bends

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door

S&F 110 mm dia PVC (SWR) vent cowl.

S&F 110 mm PVC (SWR) bend any radius

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refixing or removal to store all as specified and as directed

All as per item No 56 above herein before but 20 mm dia

S&F,16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F reducing Tee/Elbow/Socket 20 x 16 mm dia with Female Brass Threaded Adaptor (FTA/FBTA) all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms).

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs , washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm.

S&F (in repairs) Bib taps long body cast copper alloy chromium plated handle screw down, screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F (in repairs) angle cock cast copper alloy chromium plated handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store

S&F rotational moulded polethylene water tank of 1000 ltrs capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

S&F 20 mm bore CPVC ball valve or gate valves, with CPVC/PTMT wheel head all as specified and directed.

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe

S&F in repair vitreous china wash basin white, premium quality flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified

S&F in repairs 15mm bore pillar tap long body cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floor , overall length of cover plate 150mm.

Supply only 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F in repair PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified.

S & F in repairs 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete.

S&F in repair CP towel rail 20mm dia, 600 mm long between flanges

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as directed.

Removing excavated material n. exc.50 m and depositing where directed at a level not exc 1.5 mtr above the starting point.

M&L for sand filling under floors or in foundations including watering and consolidation of 75 mm thickness

M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed.

Providing precast cement concrete 1:2:4 Type B 1 (using 20 mm graded stone aggregate) in windows or door cills, lintels, bressumers, steps, quoins blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates etc. (of any section indicated) with plain fair faces,including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc.

M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 15mm thick rendering in CM 1:4 including rubbing and polishing complete

M&L for granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 20mm thick screed bed in CM 1:6 complete.

M&L for 18-20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick rendering in CM 1:4.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete.

M&L for RCC type B0 1:2:4(12.5 mm graded aggregate) in slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves complete all as specified and directed

M&L for 10mm dia and over mild steel TMT bars, cut to length , bent to shape required including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips , quality of steel conforming to demormed or twisted bars Fe-410-W (Gde E-250).

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

S&F fancy type curtain rails 25mm dia harisson rails, mild steel, chormium plated with fixing bracket, stops,rollers etc for hangging curtain rod complete all as specified and directed.

S&F in repair 600mmx450mm bevelled edges mirror consisting of PVC lining and fixed to plug with chromium plated brass screwed and cup washer

Dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Excavating in trenches , n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M & L for cement concrete type D2 1: 4 : 8 ( 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for RCC M-25 , using 20 mm graded stone aggregate as in column footing including raft footings, foundation, bases of columns etc. complete all as specified and directed.

M & L for RCC M-25 using 20 mm graded stone aggregate as in beams, cantilevers, lintels, plinth beams, tie beams over 1.5m span complete all as specified and directed.

M & L for RCC M-25 using 20 mm graded stone aggregate as in colums, pillars etc complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation plinth beam and similar work vertical or bottom rough finished surfaces of concrete in flate surfacescomplete all as specified and directed.

Form work to sides of pillers, posts,struts, piers, columns rough finished surfaces square, rectangular or polygonal complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length , bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups , spacers and binders, bent to shape required including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surface using water proofing compound @ 3% by weight of cement content or as per manufacturer's instruction. (Note- integral WPC shall be measured and paid separately of wall finished even and fair complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface using water proofing compound @ 3% by weight of cement content or as per manufacturer's instruction. (Note- integral WPC shall be measured and paid separately complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for providing cement concrete type B-1 1:2:4 (20 mm graded aggregate) as in copings etc complete all as specified and directed.

S&F for Joist, channel , angle or tee sections, fixed independently without connecting plates etc (cut to ordinary lengths i.e. within 20mm of the length indicated of FE 410 W (Gde E-250) quality 'A'. complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed within 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured ) complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Returning , filling in, including spreading , levelling , watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground Posts embedded in Concrete, brick work, masonry, etc complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Taking down carefully of point wiring (Light , fan, socket or power) complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed

Taking down carefully old unserviceable fittings & Fixers of any type and any size.

Taking down carefully old unserviceable by unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity .

Taking down carefully old unserviceable sub main wiring of any size .

(a). One light point controlled by one switch

(b). One fan point controlled by one switch

(c). One exhaust fan point controlled by one switch

(d). One 3-pin socket outlet 5 Amp on independent board.

(e). One 3 pin socket outlet 5 Amp on same board

(d). One light point controlled by two way switches

(f). One bell point controlled by one switch

All as per item No 124 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

S &F Modular switch polycarbonate SP one way 6 Amps complete all as specified and directed

Supply and fix in replacement two way modular switch 6 amps, 230 volts, complete all as specified .

S &F modular switch polycarbonate SP one way 16 Amps complete all as specified .

S&F modular bell push 6 amp single pole one way complete.

S&F modular socket out let 3 pin 6 amp multipurpose flash type.

S&F modular socket out let 5 pin 6/16 Amp multipurpose, flush type 240 volt complete.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete.

S&F bell ding dong type AC 230 volt single pole Complete.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified.

Supply and fixing LED bulb 9 watt include connection all as specified. Make: C &S

M & L for replacement of Step regulator electronic modular fan regulator flush socket type on the existing phenolic laminated sheet etc as required complete & all as specified.

Taking down Exhaust fan of any size and deposited to E/M storeyard for refixing, complete all as specified

S&Fin replacement of old exhaust cupper binding 300mm with capacitor complete and fixing all as specified with Engr-in-charge.

Taking down fan of any size, sealing cable end, dismantling blades and removing fan and blades to store.

Supply & fix 1200mm Glaze BLDC ceiling fan (white) complete with remote control and electronic type regulator and accessories 230 V,1200 mm sweep. 5 star rated all as per specified and as directed by Engr -In-Charge

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity SPN 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fix in replacement MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted .

S&F box type LED light fitting suitable for 4 ft 20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Taking down old unsv bldg security light fitting, Supply and fixing new LED bldg security light fitting 45 watts with senser to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I including testing after completion.

Supply and fix decorative light fitting 1x9watt ceiling/wall mounted LED BULKHEAD luminaire with engineering plastic housing and top frame with opal PMMA diffuser.

S & F in replacement mirror LED light fitting 2 feet 10 watt with accessories complete all as specified and directed.

S & F PVC conduit with accessories 25 mm dia for drawing telephone/TV/internet wires complete all as specified and directed. Note :- ( only PVC conduit with accessories shall be measured and paid).

S & F for TV socket and including sunk cast iron 1.6 mm thick pressed steel terminal box and mounting of hylem sheet its necessary fittings and accessories all as specified.

Taking down existing energy meter by disconnecting clectric connection of any type ,any make ,any capacity in poly carbinate or sheet steel body, ISI marked ,50 Hz 240 volts AC single phase rating etc. all as specified.

Refixing existing energy meter by disconnecting clectric connection of any type ,any make ,any capacity in poly carbinate sheet steel body with door ISI marked ,50 Hz 240 volts AC single phase/Three phase rating etc. all as specified.

S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified .

Taking down of TPN DB all as specified.

S&F MCCB 100 Amps 4 pole36 KA all as specified

Taking down faulty damaged unserviceable LT under ground cable of any size.

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 25 sqmm 4 core complete all as specified .

Supplying and laying un-reinforced precastconcrete cable cover, but Class LV, Type I, flat, size 250mm x 150mm x 40mm all as directed and specified by Engr-in-Charge.

UTTRAKHAND BUILDERS (BID ID -3462296)

m/s udit constructions (BID ID -3467600)

M/S SHAHABUDDIN AND SONS (BID ID -3460000)

M/S MANSI TRADERS (BID ID -3465360)

M/S CHAUHAN ELECTRIC WORKS (BID ID -3467638)