SPECIAL REPAIRS TO BLDG NO P-216 OR LIVING ACCN OF 973 AD REGT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including floor finishing complete and disposal of debris to distance n exc 50m complete all as specified and as directed.

Demolition of brickwork walling built in cement mortar including all quoins,arches,pillars,etc complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc. 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm each but not exceeding 4 sqm complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore, and removal from site complete all as specified and as directed.

Taking up or down steel tubing and connections, 25 mm bore, and removal from site complete all as specified and as directed.

M&L for cutting chases in brick walls for concealed water tubing and making good to facing where required and pointing in position in CM(1:3), cutiing not exc 10 cm girth complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius,built in CM 1:6 complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in and setting in cement mortar 1:4 complete all as specified and as directed.

M&L for 16-18mm thick green marble in one piece machine cut as in cooking plate form,steps,window cills and like set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to make with marble shade, laid over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete all as specified and as directed.

M&L for rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering, 10 mm thick, in cement mortar 1:3, on ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for Providing plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates, 25mm thick, as in floor/sub base and finishing concrete surface fair and even to receive top floor finishes complete all as specified and as directed.

M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid in floor, set and jointed(square/ rectangular) in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.color and pattern as approved by EIC

M & L for glazed ceramic coloured wall tiles in vertical surface 350x 250x 7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick rendering in CM : 1:4 complete all as specified and directed.color and pattern as approved by EIC

S&F for Solid PVC door frame of size 50 mm x 47 mm, made out or 5 mm, plain colour PVC sheet, reinforced with MS Square tube complete all as specified and as directed.

S&F for Factory made solid panel PVC door shutter, 30 mm thick (Style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' chanel on both sides having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on both sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing complete all as specified and as directed.

M & L for mild steel work as in door frame (chaukats) of angle or other section Confirming to grade Fe-290 or Fe 330-0 incl. Preparing back of chowkat and applying two coats of tar & sanding complete all as specified and as directed.

S&F 35mm thick Second class hardwood Plain framed, Factory made panelled shutter(two panel) with lock rail and panel of 9mm B.W.P.commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003(part-I),kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F for Second class hardwood, glazed and skeleton shutters,35mm thick ,open rebated and prepared to receive, glass etc, with sash bar, divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F for 100mm long stainless steel butt hinges fixed to PVC frames complete all as specified and as directed.

S&F for aluminium, anodised, barrel tower bolt of extruded section, 150mm long, complete all as specified and as directed.

S&F for extruded aluminium alloy handles, 150mm long size, fabricated type, anodised including taking down old existing handle complete all as specified and as directed.

S&F for aluminium alloy, anodised, sliding door bolt, 250mm long, with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces, of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of approved colour synthetic enamel paint complete all as specified and as directed.

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S & F anodised aluminium window shutters, side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips, rubber neoprene packing, handles 01 No in each shutter, 02 Nos hinges per shutter, anodised aluminium snap beading, screws etc. as per manufacturers instruction & trade practee complete all as specified and as directed.

S&F Mild Steel Framed work suck as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with tinned tacks of galvanized wire staples and wooden bedding complete all as specified and as directed.

S&F 4.00 mm thick sheet glass ordinary quality and glazing with rubber packing to aluminum window in square n.exc 0.5sqm in each pane complete all as specified and as directed.

S&F 4.00 mm thick figured glass , pin head type and glazing with rubber packing to aluminum Vent in square n.exc 0.5sqm in each pane complete all as specified and as directed.

S&F for Steel water tubing,15mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F for Steel water tubing,25 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix in repair for Bib tap,15mm bore, fancy type, brass chromium plated with long body,crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F for cast copper alloy chromium plated 2 in 1 Bib Cock of 15mm dia Complete all as per sample and complete all as specified and as directed.

Supply and fix in repair for brass chromium plated Angle Cock with plate flange of 15mm bore, fancy type,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair for Stop valve,15mm bore, fancy type, brass chromium plated, (concealed type), with long shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair for CP cast copper alloy shower rose 75mm dia with Swivel joints for fixing with 15mm bore pipe etc including taking down of existing old sower complete all as specified and as directed.

S & F in repair 15 mm dia Gun-mental, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repair 25mm dia Gun-mental, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair for towel Rail, brass chromium plated. D type, 600 mm long between flanges complete all as specified and as directed.

Supply and fix in repair for Vitreous china squatting pan of orissa pattern, size 580 x 440 mm, white, with 'P' or 'S' trap, with integral foot rest, complete all as specified and as directed.

S & F in repair vitreous china wash down water closet pan "P" or S Trap (Pedestal pattern) White including connection to drain or out going pipe and to Flushing pipe, anty syponage pipe etc with plastic water closet seat white closed pattern with flat bottom and cover and hinges device complete all as specified and as directed.

Supply only for PVC flushing cistern, low level,10 litres capacity , valveless, syphonic action type, white, with inlet, ball valve, float, handle, flush pipe of polythlene of low or high density or PVC, 32 mm dia complete all as specified and as directed.

Supply and fix in repair for PVC connection, 15mm size, with PTMT nuts, of length 450 mm long complete all as specified and as directed.

S&F in repair vitreous china Wash hand basin, white , Ovel Type size 460x400 mm excluding tabs but incl brackets, CP waste coupling complete all as specified and as directed.

S&F for Pillar tap, brass, 15mm dia, with capston heads, chromium plated, screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin complete all as specified and as directed.

S & F in repair of chromium plated hand shower (Health faucet) 15mm dia 1 mtr long tube acrylic type complete all as specified and as directed.

Supply and fix in repair for PVC(HDPE), 32 mm dia, polythelene, of pressure rating 6 kgf/sqcm, fixed complete to wall, ceiling or in floor, for wash hand basin including taking down of existing old pipe complete all as specified and as directed.

Supply and fix in repair for Vitreous china urinal, half stall type, white,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections, complete all as specified and as directed.

Dismantling of water tank of capacity exc 500 but n.exc 1000 litre and removing to store complete all as specified and as directed.

Supply and fix rotational moulded double layered polyetylene water storage tanks ISI marked of 1000 litre capacity (Cylindrical vertical with closed top)hoisted and fixed in position all as specified in SSR Part-I ,including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.) complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, laid in trenches including taking down old one complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall including taking down old one complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipes, 110 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall including taking down old one complete all as specified and as directed.

Supply and fix in repair for 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.

Supply and fix in repair for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repairs C.P grating of size 150 x 150 mm complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 as in sunken slabs etc complete all as specified and as directed.

M&L for rendering, 15 mm thick, in cement mortar 1:3 over brick or concrete surfaces, finished even and smooth without using extra cement, mixed with integral water proofing compound @ 3% by weight of cement complete all as specified and as directed. Note:-Integral water proofing compound shall be measured and paid separately

M&L for applying a tack coat of industrial bitumen, using 85/25 grade bitumen, at the rate of 1.2Kg per sqm including cleaning the plastered surfaces complete all as specified and as directed.

S&F 50 mm bore GI tubing light grade in small length fixed in walls/beams in sunken slabs as spouts including making good to disturbed surfaces complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregates as in slabs supported on walls,deck slabs and in shelves and the like complete all as specified and as directed.

M&L for use and waste of formwork to rough finished surfaces of concrete for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F for pressed steel window fabricated out of cold reduced low carbon steel sheet of designation CR2. Grade D as per IS 513:2008 including following components/ specification complete all as specified and as directed:- (i) Two leaf glazed shutter and two leaf gauzed(fly proofing) shutter.(ii) Opening of windows exceeding 0.90 sqm but not exceeding 2.00 sqm. (iii) Pressed steel window frame double rebate. (iv) Grill of 10 mm ms square bars @100 mm C/C (Horizontal) spacing throughout outer frame to outer frame. (v) MS box type hinges, stay, latch, Handle, tower bolts.(vi) Flat iron for holdfast and fillets for fixing wire mesh.(vii) All section made of CRLCS sheet 1.25mm thickness for outer frame mullion/transomsand 1.00mm thickness for shutter frame and size/shape of all section as specified in drawing. (viii) 3.00 mm thick oridinary quality fixed with oil putty.(ix) Stainless steel wire cloth 0.36mm nominal dia and 1.40mm aperature.(x) Rest all as specified in drawing No CEZ/2015/TD/019 sheet No 1R/3, 2R/3, 3R1/3.

M&L for preparation of newly steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition cement concrete (un-reinforced)of any description and in any position not otherwise specificallly provided for n.exc 15cm thick over complete all as specified and as directed.

M & L for 50mm average thick padding with cement concrete 1:2:4 type B-1, using 20mm graded crused stone aggregate. finished even and smooth without using exra cement complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1 :3 over concrete surfaces with water prooing compound @ 3% by weight of cement complete all as specified and as directed. (Note : WPC shall be measured & paid separately)

M&L for cement concrete 1:2:4 type B-1 using 20mm stone aggregate as in roof kerbs or mud stops rounded or chamfered on edge including necessary form work complete all as specified and as directed.

M&L for water proofing treatment to roof slab by applying one coat of bituminous/polymerized primer confirming to IS-3384 i.e 0.30 litre/sqm and laying actetic poly propylene (APP) modified membrane pre febricated reinforced with non wovan ployester of minimum 3.50 kg/sqm. 3mm thick (minimun) with minimum 75mm side overlap and minimum 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone agg ) as in coping bed plate for hold fast, Frame Filling etc including necessary form work etc complete all as specified

Supply only integral water proofing liquid complete all as specified and as directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site complete all as specified and as directed.

M & L for concealed point wiring complete with multistranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.6 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and as directed.

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.

One light point controlled by two way switches

All as per item No. 86 above but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board complete all as specified and as directed.

M & L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 2.5 Sqmm earth wire, PVC insulated & unsheathed complete all as specified and as directed.

Taking down U/S FTL and Supply and fixing of 4' 18W LED Tube With Batten with system lumen output of 1800 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS.Make of LED From Philips/Crompton/ Wipro. Housing of Batten should be made from Single piece powder coated CRCA sheet steel.Similar to Crompton LDSL 18-CDL with Master TLED 18W 1800 Lumens complete all as specified and as directed. Make : CG/Phillips/Wipro.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting with & including LED bulb of 6W, 230 volts complete all as specified and as directed. Make of CFL Phillips/CG/Wipro.

Supply and fixing flexible wall mounted table lamp with cover and including with LED lamp 9 Watt for study purpose. Make : Philips/CG/Wipro

Supply,Testing & Commsioning of IP66 & IK09 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . System Lumen Output of minimum 600 lumens. Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminaire should be with Opal diffused Polycarbonate. including & connecting with 0.5 sqmm PVC insulated overall PVC sheathed 3 core flexible cable complete with all other accessories & all as specified & directed. MAKE: Philips Model - WT202W or equivalent wipro, crompton, Havell's

Excavation in trenches not exceeding 1.5 m wide and not exeeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc as directed by Engineer-In-Charge.

Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each all as directed by Engineer-In-Charge.

Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

M & L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable all as specified.Note:Punned thickness shall be measured

M&L well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise complete all as specified & directed.

Supply and Laying in trenches/fixed on walls/poles of passing through pipe, 25 Sqmm 4 core PVC insulated armoured heavy duty LT U/G electric cable with aluminium conductor 1100 volts grade with suitable cable glands and lugs etc complete all as specified and as directed.

Supply and fix 50mm dia bore GI tubing light grade for protection of cable at wall/trench with fixing accessories complete all as specified and as directed.

Material and labour for cutting of PCC floor/plinth/wall etc for insertion of GI pipe for protection of LT cable including making good disturbed surface complete all as specified and as directed.

S&F switch piano flush type single pole one way 5 Amp 240 Volts complete all as specified and as directed. Make : Anchor/SSK/CONA

S&F switch piano flush type single pole two way 5 Amp 240 Volts complete all as specified and as directed. Make Anchor/SSK/CONA or its equivalent

S&F switch socket combination 2 in 1, 3 pin, 5 Amps flush type 240 Volt complete all as specified and as directed. Make Anchor/SSK/CONA or its equivalent.

S&F switch socket combination 3 pin 5 and 15 Amp 2 in one flush with inbuilt indicating lamp complete all as specified and as directed. Make Anchor/SSK/CONA or its equivalent.

S&F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and as directed.

S&F in repair TPN DBs Vertical type 4 way with provision for FP as incomer and SP as outgoing complete all as specified and as directed. CAT Part No. IP 43-IK 09 with metal door of CAT No. 6077 50 of Make Legrand or its equivalent in Schnieder/ABB

S&Fin DB's MCB's/TPN/SPN of 10/35 KA rupturing capacity conforming to IS-8828 of the undermentioned type and ratings complete all as specified and as directed :-

S & F TPN 63 Amps 35 KA rupturing capacity of Make Legrand/C&S/Havells or its equivalent

DX3 RCBOs double pole 240 V, AC type 30 mA ISI marked as per IS-12640-2, integrated label holder, ergonomic design with colour cooled ON/OFF indication on dolly with front face indication for earth leakage fault having IP 20 protected terminals of size 35 Sqmm of 32 Amps capacity complete all as specified and as directed. CAT Part No. 411326 of Make Legrand or its equivalent in Schnieder/ABB

MCB SP &N 5 TO 32 Amp 240 Volts for TPN DB (Common)

MCB SP 5 to 30 Amp 240 Volts

S&F in repair sheet metal enclosure for single pole and neutral 08 way 240 voilts, 100 Amp rated bus bar complete all as specified and as directed. IP 43 - IK -09 CAT No. 6077 11 of Make Legrand or its equivalent in Schnieder/ABB

Supply and fixing connecting resistance type fan regulator A/C 240 Volts complete all as specified and as directed.

Earthing complete as per electrical plate NO.3 of MES SSR Part I with galvanised steel plate earth electrode 600 mm x 600mm x 6 mm burried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and incl galvanised iron or steel earth lead wire 4 mm dia by mneans of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe shall be 20 mm dia GI medium grade incl excavation and earth work in any type of soil, PCC pit, CI Frame, RCC covers complete all as specified and as directed.

Supply and fixing exhaust fan 250 mm dia complete with louvers and all necessary accessories complete with making hole if required, complete all as specified and as directed. Make : CG/Havells/Orient.

S & F wall security light LED type complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as specified and as directed. CAT Part No.LSTP-25-CDL 25 watt of Make CG or its equivalent in Phillips/Wipro.

Indobuildenterprise