BID DOCUMENTS FOR “WORK OF DRILLING OF 250 MM DIA TUBE WELLS UP TO 300 METERS DEPTH BY DR DRILLING RIG INCLUDING PUMPING LOWERING LIFTING WORK IN 7 DIFFERENT LOCATIONS WITH CONNECTIVITY PIPELINES OF RADHANPUR NAGARPALIKA (UP TO 300 MTR). CONSTRUCTION OF PANEL ROOMS FOR RADHANPUR BOREWELL SCHEME, TALUKA: RADHANPUR, DISTRICT: PATAN, GUJARAT.”

Schedule - B Abstract

Schedule No. Description Amount (In Rs.)

DRILLING BOREWELLS WORKS AT 7 DIFFERNET LOCATION

AT RADHANPUR NAGARPALIKA, RADHANPUR

1) AADARSH SCHOOL

SCHEDULE - B1 2) MASALI ROAD

3) NEAR BHABHAR ROAD

5) BHARWAD VAS- SMASAN

6) MEHSANA ROAD

7) ARGUSAR AREA

PUMPING MACHINERIES FOR SEVEN DIFFERENT LOCATION

SCHEDULE - B3 CONSTRUCTION OF PANEL ROOM FOR BOREWELL

SCHEDULE - B4 CONNECTIVITY PIPELINE FOR EXISTING NETWORK

Total Project Cost=

I / We am / are willing to carry out the work at ………………………………… at par / above / below percent (should be

written in figures and words),

* Estimated Amount * Estimated Amount

RADHANPUR BOREWELL, RADHANPUR

NAME OF WORK: DRILLING OF BOREWELLS WORKS AT 7 DIFFERNET LOCATION AT RADHANPUR NAGARPALIKA,

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Drilling of 250 mm dia pilot bore hole inalluvial strata by DR

Rig from 0.00 mts to 300.00 mts

Conducting Electrologging Test of 250 mm dia bore hole

incl. Carting and idle hours

Reaming of 250 mm dia pilot bore hole to 550 mm dia bore

hole including assembling, jointig, lowering housing casing,

3 strainer pipe, Gravell packing, clay packing etc.comp. from 2100.00 R.Mt 438.00

250/300mm dia to 550mmm dia bore hole rom 0.00 mts to

(A )Development of Each water bearing zones comes/across

up to the full depth of tube well (Size 200/250/300 mm dia

depth more then 150 mts ) by lowering 100 mm dia

4.1 dropline and 32 mm dia GI air line for each zone with 7.00 JOB 22205.00

suitable capicity Aircompressor up to the availability of

send free discharge. (w/o air comp.charge)

(B) Development of above mentoined by Aircompressor

4.2 1100 C.F.M / 300 PSI capacity up to 6 hrs minimum untill 7.00 Job 34662.00

sand free discharge of the bore wichever is lesser.

supply of ERW pipes as below . 250mm dia ERW blank pipes

(7.10 mm thickness net.)

slotting having size of slott 6.75cm*6.35*1.59mm etc.

Supply of best quality of well sorted "Sevaliya" Gravell

having size of 4mm to 6 mm

Supply of clayball made from sticky clay of size 25 mm to 50 mm

7 at site of work (as certified by Hydrolist)

Bail plug of length 0.45 meter made from MS medium class

pipe as per IS suitable fo 250mm dia pipe

Bore plug of 100 mm height made from MS plate with

holes at equal distance on circumference for nut-bolts

type, locking arrangement with nutsbolts & lock nuts of

Clamps made from MS plate with 3 holes on either side with

10 nuts & bolts of standard make and suitable size for 250mm 7.00 Pair 2017.73

dia pipe (900mm*100mm*16mm)

Reducer made from 6 mm thick MS plate for pipe of size as

below. for 250mm dia pipe (200mm*150mm*6mm)

12 Supply of Portland Cement(53 Grade ISI Mark) 10.50 M.T. 6302.00

13 Cement Sealing 7.00 Job 13273.00

water analysys charge for chemical analysis of water ( rate

14 as per GJTI circular no GJTI/testing 7.00 LS 1000.00

rate/37/2576/date3/10/15

NAME OF WORK: DRILLING OF BOREWELLS WORKS AT 7 DIFFERNET LOCATION AT RADHANPUR NAGARPALIKA,

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Supply, installation, of MS fabricated structure cabin

Using65 mm, 50 mm & 25 mm square pipe with cabin of size

1.5 X 1.5 X 2.13 meters including providing &fitting of (1)

backalite sheet 3.5 mm thick in side (2)20 gauge M S sheet

for side wall, (3)Bakelite sheet 3.5 mm thick sheet,for

roof side (4) 24 gauge GI sheet with 15 mm plywood

sandwich fitting & flooring with 19 mm water proof plywood

sheet (5) shock proof rubber mating job oil painting two

coats door locking handle arrangementproviding proper air

ventilation as and fuse box should be fitted on timber hold

fast for holding screw or nut bolts by semi skilled labour as

per detailled techmical specifications & drawing. and per

detailed specifications & drawing. and instructions of the

Engineer in charge

16 Electrification Charges 7.00 Job 550000.00

NAME OF SCHEME: BOREWELL WITH PUMPING MACHINERY AND CONNECTIVITY TO DISTRIBUTION NETWORK AT RADHANPUR NAGARPALIKA

NAME OF WORK: PUMPING MACHINERIES FOR SEVEN DIFFERENT LOCATION BOREWELL

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Electric motor driven borewell submersible pump set confirming to IS 8034 and

motor confirming to IS 9283 working at 3 phase 400 / 440 volt 50 Hz AC supply &

LD 2.5, 420 LPM, 252 Mtr head and minimum 40 HP submersible motor.

Labour charge for fishing out submersible pump set fallen in tube well of size

mm / 200 mm / 250 mm dia. including carting of required materials, fixtures for

fishing to site of work including carting charges of the fished out submersible

2 pump set and accessories to the respective departmental store including loading 7 Job. 22,374.00

Job up to 150 meters

Providing and supplying ISI mark G. I. pipes with Couplings of following class and

diameter including all taxes insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores,

stacking etc. complete. (IS -1239) with fittings & specials like tees, bends,

flanges, reducers etc. and Lowering, laying and jointing G. I. pipes with G. I.

3 specials of following diameters in proper position, grade and alignment as directed 2100 RMT 1,020.10

by Engineer-in-charge including conveyance from stores to site of work, labour,

giving hydraulic testing, etc. comple

PVC insulated round submersible cable as per detailed technical specifications

4 conforming to IS 694, IEC 60227/60228. 2450 RMT 1,031.10

Providing and Supplying with lowering, laying and jointing ISI mark CI double

flanged Sluicevalve as per IS 14846 of following class and diameter including all

taxes insurance transporatation, octroi, freight charges, octroi, inspection

5 charges, loading unloading, conveyance to departmental stores, stacking etc. 7 No. 4,102.85

complete also with all labout, jointing material, including nut bolts and giving

satisafactiry hydraulic testing etc. complete.

100 mm (PN 1.6 with hand wheel / cap operated (PD type short body)

Providing and Supplying with lowering, laying and jointing ISI mark CI double

flanged Reflux valve as per IS 5312 of following class and diameter including all

taxes insurance transporatation, octroi, freight charges, octroi, inspection

charges, loading unloading, conveyance to departmental stores, stacking etc.

complete also with all labout, jointing material, including nut bolts and giving

satisafactiry hydraulic testing etc. complete.

Woltman Type Bulk Water Meter- Standard:

Design, Supply, Installation, Testing, Commissioning of Woltman type Bulk Water

Meter, CI/ Brass/ Bronze body material, totalizer made of copper can/ suitable

anti corrosive metallic material, totaliser metalic shall have 5 mm thick glass

cover suitable against antifraud attempts, Flange End process connection, IP

protection class, Woltman type Water Meter with removable mechanism, magnetic

7 drive, dry dial, and be fitted with a low mass rotor which is parallel to the 7 No. 19,431.00

direction of water flow and exhibits dynamic thrust relief, water meters complete

with T Type strainer, ISO 4064 : 2005 with valid CE mark mentioning notified body

number along with MlD / OIML / ISO certification from a recognized International

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Design, Supply, Installation, Testing, Commissioning of Bourdon Type Pressure

Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M) process connection, IP

Glycerine filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube, SS

316 Movement material, Aluminium dial with black graduation on white

background, Micro Zero adjustable pointer, neoprene gasket, Blow out disc,

shatter proof glass, SS tag plate etc as per IS

0 to 21 Kg/cm2 - 100 mm Dial Size

Auto transformer starter suitable for local & remote pump control application

consisting of Auto Transformer (vacuum impregnated, air cooled having three (3)

tappings at 50%, 65% and 80%), incomer MCCB / MPCB, overload relay and

9 contactors as per Type II coordination including digital MFM with RS 485 7 No. 33,403.00

communication port, analogue type ammeter with selector switch, run hour

meter, required protective relays & control accessories.

A. T. S. from 36 to 45 HP

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated, stranded

Aluminium conductor, galvanised steel flat strip / round wire armoured, extruded

PVC type ST2 sheathed, heavy duty cable (to be laid on wall surface with

10 necessary clamps / in existing cable trench / cable trays / conduit / pipe sleeves 2450 RMT 182.00

at road crossing or floor as per site requirement) conforming to IS: 7098 (Part-1) &

IEC: 60502 (Part-1) of following sizes:

4 Core x 35 Sqmm

LV MCC Panel with DOL / Star Delta / ATS / Micro processor based soft starter:

SITC of LV MCC Panel totally enclosed, dust & bermin proof, indoor type, minimum

degree of protection - IP 52 as per IS: 2147, operation on 3-Phase, 4 Wire, 415V,

50Hz, Neutral effectively grounded, with instrumentation compartments

accomodating LED type indicating lamps, control contactors as per IS: 13947, CT

of accuracy class- I as per IS: 2705, relays, meters & control MCBs, air insulated

electrolitic grade Aluminum bus bar for three phase & neutral system with

incomming breaker- microprocessor based Air Circuit Breakers (electrically

operated drawout type)/ air break fixed type MCCB with trip free mechanism,

current limiting type as per IS: 8828, Motor Contractor (as per type -2

coordination), Overload Relay with built-in single phasing prevention feature &

11 auxiliary feeders as per SLD drawings, momentary contact type push buttons,

equipment fittings, bus bars, cable boxes, cable gland, incoming & ougoing cable

connection for 1100V grade, Aluminium/ Copper conductor XLPE / PVC insulated &

PVC sheathed armoured cable, 10% spare terminals, power wiring using 1100V

grade, FRLS insulated copper conductor wires conforming to IS: 694 & 8130, cable

compartments / alleys of minimum 300 mm size, GI / Al earth bus bar for entire

length. MCC shall be fabricated from cold rolled, coled annealed (CRCA) sheet

steel & minimum thickness of various members shall be as follows: Base Frame /

Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm and Internal

Partitions: 1.6 mm.

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type CT,

Digital MFM, Analogue Ammeter, SPP, Timer etc. 7 No. 71651.00

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Incomer of MCC Panel :

Supply, installation, testing and commissioning LV Distribution Board (LVDB)

totally enclosed, dust & vermin proof, indoor type, fabricated from CRCA sheet

steel with minimum thickness of 3 mm for base frame / channel / gland plates,

2.0 mm for load bearing members / doors & 1.6 mm for internal partitions,

minimum degree of protection - IP 52 as per IS: 2147, suitable for operation on 3-

Phase, 4 Wire, 415 V, 50 Hz, Neutral effectively grounded, with instrumentation

compartments accomodating meters, aux / protective relays, LED type indicating

lamps & control MCBs as per IS: 13947, current & voltage transformers as per IS:

2705, air insulated electrolitic grade Aluminum / Copper bus bar for three phase &

neutral system, GI earth bus for entire length, power / control wiring using 1100 V

grade, FRLS insulated copper conductor wires conforming to IS: 694 &

equipment fittings, horizontally running busbar compartment height of minimum

300 mm, incoming & ougoing cable connections for 1100 V grade, Aluminium /

Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable. LVDB

shall have required incomming / bus coupler / outgoing modules of following type

-Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms

to IS / IEC 60947-2 with trip free mechanism, current limiting type with Thermal-

Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings &

having minimum 2NO+2NC potential free auxiliary contacts with all necessary

Electro-Mechanical protections & interlocks etc. MCCB module, when used as

Incommer / Bus Coupler, shall have enclosure dimensions- 1800(H) x 600(W) x

(D) & following technical features:-

4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), TM

Earthing: Supplying & erecting Funnel type earthing having earth plate of following

size burrid in specifically prepared earth pit 3 m below groung with 40 kg charcol

& solt with alternate layers of charcol & solt , 20 mm dia GI pipe wuth funnel with

a wire mesh for watering & brick masonary block CI cover complete as per para

7.3 of IS 3043 with necessary length of double GI/copper earth wirw No.6 SWG

13 bolted with lug to the plate & covered in 12 mm dia GI pipe 2.5 mt. long complete 14 Each 2,295.78

connected to the nearest switch gear with ends socket as per direction & duly

tested by earth tester conforming to IS (As per Drawing) with following

specifications.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of applications

with Chamber and heavy duty cover.

(a) For Electrical Installation up to 440V in normal soil,

Length of pipe - 1 Mtr, 7 Job 4,549.31

Back filling compound - 1 Nos Bag of 15 Kg.

Providing approved make triple pole clas switch use unit 415 / 440 v with HRC

15 fuse of suitable load and nutral link confirming to IS 7 No. 5,892.43

Supplying rubber matting of following thicknessas per IS:15652/IEC

16 4 mm Thickness. 42 Sq.m. 1,017.00

Providing and erecting metallic vitrified danger notice board as per language

17 suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as 7 No. 69.13

Providing and fixing printed instruction chart both in English and Gujarati and duly

18 framed with front glasses, for treatment of person suffering from Electric shock 7 No. 129.06

with minimum 50" diagonally size.

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Supplying stand first AID box with antiseptic cream, medicine for use on wounds

due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-

19 aid adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or 7 No. 297.00

similar) etc. (All above contents shall be of standard makes)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I.

sheet with extra handle at bottom duly painted white in side and Red out side

with FIRE mark, filled with dry-sand and kept on existing stand provided or hung

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets

comprising 1500 mm in length, 900 mm height frame made out of 30 mm X 30 mm

X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly

painted with one coat of red lead an dtwo coats of approved enamelled silver

NAME OF SCHEME: BOREWELL WITH PUMPING MACHINERY AND CONNECTIVITY TO DISTRIBUTION

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Designing (aesthetically) and constructing

R.C.C frame structure of panel room for

Without Gantry structure (Upto 3.60 M)

1. Minimum 15 % opening for ventilation should

2. Pump room rolling shutter, door and

windows of aluminium section and window grill

of iron should be provided (Included in Cost).

3. Plinth level of Pump house should be min.1

meter above GL.

4.Cost does not include foundation for pumping

5 X 5=25 sq.mt. Total RS

NAME OF SCHEME: BOREWELL WITH PUMPING MACHINERY AND CONNECTIVITY TO DISTRIBUTION NETWORK AT RADHANPUR

NAME OF WORK:- CONNECTIVITY PIPELINE FOR EXISTING NETWORK

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Providing and supplying D. I. K-7 grade pipes for following nominal bore

diameter with internal cement mortar lining including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete. (IS

Providing and supplying in standard length ISI mark rigid unplasticised PVC

pipes suitable for potable water with ring fit joint including cost of rings, as

per IS specification no. 4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores and including cost of

jointing meterial etc. complete.

Test Pressure 6 kg/cm2

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends,

tees, reducers or any other specials as per BS-EN-545/1995 Class-A series K12

suitable for use with DI pipes manufactured as per IS:8329/1994 delivery of

specials is to be made to store or site of works any where in Gujarat

including all taxes, liading, unloading, carting, stacking, insurance,

inspection charges, octroi etc. complete. (With external bitumen & zinc

coating & internal cement mortar lining)

Providing and supplying, Laying, jointing of UPVC specials with suitable UPVC

pipes, work including all taxes, transportation etc complete 1 LS

Providing and supplying ISI mark CI D/F Sluice Valves as per IS : 14846 (Latest

Edition )of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete.

PN-1 With hand/wheel cap operated (Alt-1 type long body)

Excavation for pipe line trenches incl. all safety provisions using site rails

and stacking excavated stuff up to a lead of 90 mts. cleaning the site etc.

complete for lifts and strata as specified.

0 to 1.5 Mt. Depth

1096.55 In all sorts of soil and soft murrum 1096.55 Cu.M 102.35

1096.55 In hard murrum,boulders,incl. Macadam road 1096.55 Cu.M 155.25

469.95 Soft rock 469.95 Cu.M 187.45

469.95 In Hard rock. 469.95 Cu.M 427.80

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints

/ Mortar lined D. I. Pipes of various classes with CI / MS specials of following

diameters in proper position, grade and alignment as directed by Engineer-in-

charge including hydraulic testing etc. comp.

Lowering, laying and jointing PVC pipes and specials of following class and

diameter including cost of conveyance from stores to site of works including

cost of labour, material, except cement solvent, giving satisfactory hydraulic

testing as per ISI code.

Lowering, laying and jointing in position following C. I. / D/F Sluice valves

including cost of all labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing, etc. complete.

Construction of valves chambers in brick or bela stone masonry, locally

available in CM 1:6. Foundation concrete 150 mm thick in CC 1:4:8 of trap

metal size 25 mm to 40mm thick, inside cement plaster in CM 1:3 and

cement pointing outside in CM 1:3 and top cover of precast RCC slab 100 mm

thick (with key hole in two parts, each with handles or MS bar etc.

completed as giver size) upto 1 mt depth from GL to pipe invert level incl.

completed civil works but excluding cost of excavation and refilling, with

cast in situ RCC slab in one single piece with fixing of CI MH frame and cover

with 23 mm thick brick masonary wall in CM 1:6 : With precast slab in two

2.00 SV ScV.dia.)

Chamber - 0.9 x 0.9 x 1.0 m (For valve 200 & 250 mm dia.) 2.00 No. 8898.70

2.00 SV & ScV. Chamber - 1.3 x 1.3 x 1.0 m (For valves of 300 & 350 mm dia.) 2.00 No. 13053.65

Extra depth of Valve chamber beyond 1.00 mt. depth.

SV & ScV. Chamber - 0.6 x 0.6 x 1.0 m (For valves of 50, 65, 80, 100, 125 &

0.90 SV & ScV. Chamber - 0.9 x 0.9 x 1.0 m (For valve 200 & 250 mm dia.) 0.90 mt 5150.85

1.30 SV & ScV. Chamber - 1.3 x 1.3 x 1.0 m (For valves of 300 & 350 mm dia.) 1.30 mt 6996.60

Pipe Encasing :Providing C.C.M. : 100 for pipe encasing around pipe by using

trap metal size 12 mm to 50 mm incl. work including excavation,formwork,

20.00 needle vibrated consolidation, curing, etc complete . for various location on 20.00 Cmt 3873.83

pipe line-using trap metal 40 mm size, - For Pipe Encasing

Thurst Block: Providing and Casting in situ C.C. for Thrust Block - Providing

and casting in situ C.C. in grade M-20 (approx. corresp. to prop. 1:2:4)

(proportions as per mix design or as per Table 9 of IS456 2000 in masses by

weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm

for RCC work, including scaffolding centering, form work, needle vibrated

consolidation, curing comp. up to 6 meter depth or height (excluding cost of

reinforcement and neat finishing) with centering and

shuttering/deshuttering etc. comp. for structure for other than water

3.36 Footing for column or foundation with form work 3.36 Cum 6348.00

Sr. No. Item Description Qty Unit Rate Amount (Rs.)

Reinforcement for Thrust Block : Supplying cutting, bending, binding and

placing in position steel as per plan and design and as per ISS 2502 including

336.00 cost of steel and binding wire for structures only including lift up to 6 meter 336.00 Kg 84.19

height or depth below G.L., Do-Thermo mechanically treated (TMT) bars Fe-

415 grade for all diameters.

Refilling the pipeline trenches incl. ramming, watering, consolidating

3008.00 disposal of surplus stuff as directed within a radius of 3 km 3008.00 Cum 25.30

2835.00 Reinstatement of roads with RCC road 2835.00 Sq.M 1162.00

Restoration : Add for Restoration of infrastructure like kharkuva, electrical

line, water supply line,telephone cables all type, gas line, septic tank etc

111.00 upto 1.5 m depth 111.00 Nos. 2103.35

SUB-TOTAL FOR LABOUR PART-B