Construction of Taluka Court Building at Jamjodhpur, Dist.Jamnagar (Pro. and Supplying Furniture Work).

NAME OF WORK: Construction of Taluka court building at Jamjodpur.Dist: Jamnagar

(Providing and Supplying Furniture work )

BILL OF QUANTITIES

Sr. Item of work QTY Unit Rs. In Amount

1 WOODEN JUDGE CHAIR:Providing and Arranging dias chair having overall height of 1.52 mt made 2.00 No. 15268.17

from Indian teakwood having Back leg size 50mm x 50mm, Back Support 75mm x 35mm size,

handle 75mm x 30mm size, Back Logo (National emblem) made from bronze metal of size 150mm x

30mm to be fixed on wooden back of size 225mm x 35mm Indian teakwood frame work. All the

wooden members to be moulded as per the approved design and as diretced by Engineer in charge.

Seat having 80mm (3") thick 40 density foam to be fixed on 12mm thick RA grade plywood and back

having 50 mm (2") thick 40 density foam bottom, back and seat foam both with high quality fabric

(Basic Rate Rs.400/Rmt) of approved shade. All wooden members finished by melamine polish

Including all materials and labours etc. complete as per drawing and instruction of Engineer-in

Dias Chair : Overall Size : [0.635 x 0.610 x 1.52 (H)]mt (Arm rest 0.63 Mtr)

2 HIGH BACK TILTING AND REVOLVING CHAIR 6.00 No. 16981.13

Providing and arranging PREMIUM EXECUTIVE REVOLVING CHAIR (High Back) Sigma chrome Base with

Knee Tilt Synchro Mechanism with Any Position back Lock, Seat & Back - Made from High Density U - FOAM,

Arms - Aluminium Die Casted with Cushion Pad. Including all materials and labour etc. complete as per

drawing and instruction of engineer-in-charge. Size : max. Height : 1290mm to Min. 1170mm, Seat : 530mm x

520mm, back 740mm x 500mm.

3 MID BACK TILTING AND REVOLVING CHAIR 51.00 No. 7404.31

Providing and Arranging PREMIUM EXECUTIVE REVOLVING CHAIR (Medium Back) Sigma chrome Base with

Knee Tilt Synchro Mechanism with Any Position back Lock, Seat & Back - Made from High Density U - FOAM,

Arms - Aluminium Die Casted with Cushion Pad. Including all materials and labour etc. Complete as per

drawing and instruction of engineer-in charge. Size : max. Height : to Min. 950 x 1050 mm, Seat : 475mm x

575mm ,back mm x 500 mm

4 LOW BACK TILTING AND REVOLVING CHAIR 52.00 No. 5151.00

Providing and Arranging Cushioned Seat & back, PP outer back cover, PP arms, Single back lock, Push back

mechanism, gas lift for seat height adjustment, five prong Nylon base with twin wheel nylon castor. Including

all materials and labour etc. Complete as per drawing and instruction of engineer-in charge. Size : Max. Hight

1020mm Min. Height 930 mm, Seat : 500mm x 460mm ,Back: 500mm x 440 mm Low Back Chair

1 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

5 VISITOR CHAIR 207.00 No. 2520.96

Providing and Arranging fix chair having structure of CRCA M.S. pipe 20mm dia and 16 guage with

50 micron powder coated of approved seat and back 40 density PU foam covered with fabric of

approved shade and texture with one year replacement warranty. Wooden armrest to be provided

as per approved design. Complete chair should be in suitable shape including all materials and

labours etc. complete as per drawing and instruction of engineer-in charge.

6 ROOM NAMES AND SIGNAGES 7.00 Sqm. 1480.66

Providing and fixing sign board on 4mm thick transparent acrylic sheet and letter with sticker sheet

including fixing etc complete.

7 GANG CHAIR 45.00 No. 11405.93

Providing and Arranging three seater gang seater Providing Fixing and arranging WAITING CHAIR

3 SEATER WITH PU CUSHION, Heavy duty elegant powder coated frame. seat and back cushion for

extra comfort and upholstered with faux leather Soft curved back with stylish as per req. handle or

without handle.s.3 Seater Dimension (L*D*H): 1735*720*800mm Chair gross weight: 36 Kgs Metal:

CRCA sheet, Powder coated finish. As per Drawing and Instruction of Architect/Engineer in charge.

8 JUDGE'S TABLE (MAIN TABLE = 1800 X 900 MM ) 2.00 No. 38997.11

Providing And Arranging table for judge chamber having overall thickness of Top 40 mm

(18+18+4mm)18 mm thick MR Grade plywood and 4.00 mm thick veneer at top with melamine polish

finish including 8mm thick back painted glass. Top to be made from 75mm x 50 mm Indian teak

wood with half round moulded on long side with melamine polish. Leg 50 mm x 50 mm x 1.6 mm thick

CRCA Square pipe and supporting pipe 50 mm x 25mm x 1.8 mm finishing with epoxy powder coated

50 micron with leveller. Appron having 18 mm thick MR Grade plywood with 4.00 mm thick veneer

having melamine polish finish. Drawer Unit-450 x 550 x 600 mm having all Structure 18 mm thick MR

grade plywood with veneer and teakwood border of specified size with melamine polish finish.

Drawers (3 Nos) slides on telescopic channel with lock with two keys and necessary fixtures and

fastening as approved with balancing laminate inside 0.8 mm thick of approved shade including all

materials and labour etc. Complete as per drawing and instruction of engineer-in charge. Side Unit

to be provided separately. Judge Table with MDU veneer Size :- 1800mm x 900mm x 750mm

2 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

9 SIDE TABLE = 1200 X 450 MM 2.00 No. 6295.33

Providing and Arranging side unit with top 40mm overall thickness made from 18mm thick RA grade

plywood with approved quality laminate on top with melamine finished polish. Side and drawer made

of 18mm thick RA grade plywood with approved quality laminate and inside Melamine polish.

Teakwood border with melamine finished polish of specified size to be provided all around the

borders of plywood. Drawer run on telescopic channel with lock with Two keys and shutter fixed

with auto hinges incld. all necessary fixtures and fastening as approved and back of the unit with

6mm thick RA grade playwood with Melamine with nylon bullet including all materials and labour

etc. complete as per drawing and instruction of Engineer-in charge.

10 OFFICER'S TABLE (MAIN TABLE = 1500 X 750 MM & SIDE TABLE = 900 X 450 MM) 7.00 No. 28416.35

Providing and fixing table unit consist main table, side table , with pedestal unit with all necessary

accessories keyboard, CPU stand ,cable manager, modesty panel etc with all required necessary

accessories. All finishes laminate,powder coating /anodizing shade shall be approved by Engineer

In charge. All Table top : 50 mm thick postfoam top (reverse bull nose) with 1 mm thick Laminate

finish as per approved make and sample by Engineer In charge. Verticle support: comprising from

IS 303 BWR ply with both side finish with 1 mm thick VNR Laminate . Wire management: Raceway

:one way or two way openable flip top box mounted on table top squezze : All the exposed edges are

sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia

are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 1 file drawer.

The drawer box is fitted with telescopic channel for free movement. The drawer unit is provided with

central locking system, SS 304 recessed handles are provided . The drawer unit is fitted on castors

(optional) for easy mobility. The complete furniture unit is factory assembled with knock down

fittings.Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation,

monocoat polish, placing at all floors and for all leads, all accessories as described in item

description. Work complete as per the detailed drawing , mockup sample and instruction of

Engineer In charge.

3 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

11 WORK STATION (MAIN TABLE =1350 X 750 MM & SIDE TABLE =900 X 450 MM) 30.00 No. 19722.27

Workstation with MDU ( P.A ) - 1350mm X 750mm : Providing , fixing & Fixing linear workstation as

per drawing,framing the skeleton with 18mm + 18mm thick vertical and horizontal plywood patti

both side cover with 6mm thick plywood for grooving design and finishing with selected laminate

1.00mm thick.Before installation,make hole/face plate for conduit pipes of electrical/ networking

cables with openable stud from horizontal partition. vertical support of 18mm + 18mm thick double

plywood cover with 1mm laminate finish including 18mm thick curvica on exposed edges.Fitted

25mm thick (Partical board,interior grade)post forming laminated top, fixed with metal clamps

including suspended metal keyboard-mouse tray fixed with telescopic channel,cable manager and

separate drawer with lock,telescopic channel and box,made from 18mm plywood with 1mm outside

and 0.8mm inside laminate as well as 18mm post forming outside of shutter with auto hinges of

hafele or equivalent for left or right side.Drawer run on telescopic channel with lock with Two

keys.Providing and fixing of softboard(12mm thick)finished with tapestry of good quality.partition

hight 1200mm.Including all materials and labour etc.Complete as per drawing and instruction of

engineer-in charge.

12 STAFF TABLE (SIZE 1200 X 600 MM) 12.00 No. 14751.05

Providing And Fixing table top 37 mm thick made from 18 mm thick MR grade plywood with 1.00 mm

thick laminate finish.Leg & frame to made from 50 x 50 mm x 1.6mm & 50mm x 25mm x 1.8mm size

CRC pipe powder coated 50 micron finish with levlar Appron 18 mm thick MR grade plywood with

1.00 mm thick laminate finish with T.W. border of specified size with melamine polish. The balance

laminate 0.8mm thick to be provided on inner faces including all materials and labour etc. complete

as per drawing and instruction of engineer-in charge. Table Size :- 1200 mm x 600mm

13 STAFF TABLE (SIZE 900 X 600 MM) 11.00 No. 11946.28

Providing And Fixing table top 37 mm thick made from 18 mm thick MR grade plywood with 1.00 mm

thick laminate finish.Leg & frame to made from 50 x 50 mm x 1.6mm & 50mm x 25mm x 1.8mm size

CRC pipe powder coated 50 micron finish with levlar Appron 18 mm thick MR grade plywood with

1.00 mm thick laminate finish with T.W. border of specified size with melamine polish. The balance

laminate 0.8mm thick to be provided on inner faces including all materials and labour etc. complete

as per drawing and instruction of engineer-in charge. Table Size :- 900 mm x 600mm

4 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

14 ROUND TABLE (SIZE = 1000 MM DIA) 11.00 No. 6713.47

Round Table Providing and fixing of Workstation top with necessary verticle support from of 25 mm

thick top with exterior grade Prelam partical board / Post Laminate & Body parts comprising from

mm thick exterior grade prelam partical board / Post Laminate with openable shutter and shelves

for files from Prelaminated Board or Post Laminate as per Engineer In charge Selection. All the

exposed edges are with 2mm matching PVC edge banding from & sealed edges are with 0.8mm

thick PVC Imported edge banding. SS 304 recessed handles are provided for easy opening and

closing of shutter & Premium lock system. PVC edge banding. Work complete including all

necessary hardware and fittings , mock up sample, loading, unloading, transportation, placing at all

floors and for all leads, all accessories as described in item description. Work complete as per the

detailed drawing and instruction of Engineer In charge/Engineer In charge .Only plan area shall be

measured for payment

15 XEROX TABLE (SIZE = 900 X 600 MM) 12.00 No. 5875.17

Providing And Fixing table top 37 mm thick made from 18 mm thick MR grade plywood with 1.00 mm

thick laminate finish.Leg & frame to made from 50 x 50 mm x 1.6mm & 50mm x 25mm x 1.8mm size

CRC pipe powder coated 50 micron finish with levlar Appron 18 mm thick MR grade plywood with

1.00 mm thick laminate finish with T.W. border of specified size with melamine polish. The balance

laminate 0.8mm thick to be provided on inner faces including all materials and labour etc. complete

as per drawing and instruction of engineer-in charge. Table Size :- 900 mm x 600mm

16 DIAS TABLE (SIZE 2400 X 900 MM) 2.00 No. 33666.33

Dias Table - 2400mm x 900mm x 800mm (H) : Providing and Fixing dias table having Top 40 mm thick

overall made from 18mm thick MR garde plywood with 4 mm thick veneer on top and 0.8 mm thick

backing laminate and teakwood border having size 25 mm x 12 mm with melamine polished finish.

Top border to be made from 75 mm x 50mm indian teak wood.Top and both side 40 mm thick finish

with 4mm thick veneer having melamine polish finish. Appron to be made from 18mm thick MR

grade plywood with 4mm thick veneer having melamine polish finish with 0.8 mm thick balancing

laminate. All veneer surface to be melamine polish. Bookslot on the table shall be provided as per

the detail drawing. Including all materials and labour etc. complete as per drawing and instruction

of engineer-in charge. ( with T.W. border with melamine polish )

5 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

17 ADVOCATE TABLE (SIZE 2100 X 750 MM) 25.00 No. 18659.75

Providing and Arranging table having 40 mm thick top overall thickness made from 18mm thick MR grade

plywood, top and side finish with 4mm thick veneer. both side (inside and outside) to be veneered and top

back side 0.8mm balancing laminate including teak wood border patty of size 40 mm x 12 mm with appron to

be made from 18mm thick MR grade finish with 4mm thick veneer and whole table having MS CRCA Pipe

framing of 50mm x 50mm x 1.6 mm size and 50mm x 25mm x 1.8mm size finished with epoxy powder coated of

50 micron thickness as per drawing / photograph and details including all materials and labour etc. complete

as per drawing and instruction of engineer-in charge.( with T.W. border with melamine polish ) Advocate

Table : size - 2100mm x 750mm x 750mm

18 WITNESS BOX ( SIZE 800 X 800 MM) 3.00 No. 26116.58

Wooden Witness Box : Providing, making and fixing wooden railing in court room having 1.0m height

100mmx100mm size wooden pillars at specified intervals and hand rail at top carved out as per

detail drawings, 50mmx50mm wooden battens and 19mm thick BWP grade ply wood of IS 710 of

approved brand covered with 1.0mm thick laminate of approved brand, shade, pattern in railing and

with provision of gate at one end as per detail design drawings. All wooden parts should be polished

with 2 sealer coat and 3 melamine polish coats. The work also includes fixing railing in flooring with

necc=essry anchoring, all necessary hardware, fixtures and fasteners etc. complete as per

drawings and designs supplied by the Engineer In charge and instructions by Court Authority and

Engineer in charge

19 ACCUSED BENCH ( 5 SEATER WOODEN BENCH) 2.00 No. 11551.37

Providing and Arranging benches (bakada) made from 50mm x 25mm indian Teakwood patti with

smooth edge moulding 5 Nos each on seat and back as per design. under structure made from CRC

M.S. 50mm x 50mm x 1.6 mm pipe 16 Guage and 50mm x 12mm flat for base support with 50 micron

powder coating frame.All wooden member to be melamine polish.Including all materials and labour

etc.Complete as per drawing and instruction of engineer-in charge.over all size : 2250 mm L ,Seat :

450mm wooden bench W,back : 400mm

6 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

20 ACCUSED BENCH WOODEN RAILING Size Ht 1200mm 7.00 Rmt. 6318.56

Providing, making and fixing wooden railing in court room having 1.0m height 100mmx100mm size

wooden pillars at specified intervals and hand rail at top carved out as per detail drawings,

50mmx50mm wooden battens and 19mm thick BWP grade ply wood of IS 710 of approved brand

covered with 1.0mm thick laminate of approved brand, shade, pattern in railing and with provision

of gate at one end as per detail design drawings. All wooden parts should be polished with 2 sealer

coat and 3 melamine polish coats. The work also includes fixing railing in flooring with necc=essry

anchoring, all necessary hardware, fixtures and fasteners etc. complete as per drawings and

designs supplied by the Architect and instructions by Court Authority and Engineer in charge.

21 WOODEN GANG SEAT 14.00 No. 13722.87

Providing ,Fixing & Arranging Decorative Wooden Visiter 3 Seater Benches having Indian Teakwood

in framing seat and back rest with smooth & curved edges in armrest 450mm long and of size 75mm

x 35 mm with back rest having horizontal member at top having size 75mmX35mm and outer side

vertical member having 75mmX 35mm & inner member 3 Nos having size 25mmX35mm ,seating

outer frame having size 75mmX35mm and inner member 3 Nos having size 25mmX35mm with CRC

tube setcion of size 60mm diameter 3.6 mm thickness main base frame and 20mm diameter 2.6mm

thickness vartical & horizantal frame structure & 32 mm dia 3 mm thickness pipe for handle support

with 50mm X 12mm thick main floor base MS plate with welding & anchor fastener bolts fitted with

seat, back and support.All exposed wooden members shall be melamine polished including sand

papering and making edges smooth and metal member shall be finished epoxy polyster powder

coated of 50 micron of 50micron thickness with necessary other fixtures and fastenings

etc.complete as per drawings and instruction by Engineer in Charge. 3 Seater WOODEN GANG

SEAT : size - 1600mm x 490mm x 750mm

7 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

22 TWO SEATER SOFA 1.00 No. 14512.69

Providing and supply Sofa sturcture made from 18mm MR Grade plywood supported with Solid

wood, back side and curved part Covered with 3mm flexi ply, sofa arm made from 12mm thick MR

Grade plywood supported with solid wood. Elastic Belt, 75mm board & 2.25 mm thick elastic

webbing stapling in seat frame at 100 mm centre to centre distance, belt fastern in X and Y axies of

seat, elastic belt elongation 45% tensile strength 350 kg. Foam 100 mm X 40 density Premium

Quality foam covered with 25mm X 32 density super soft Premium Quality Foam for soft touch filling

in seat. 50 mm X 40 density Premium Quality foam covered with 25mm X 32 density super soft

Premium Quality foam for soft touch filling in back. Stiching Stiching work done with well known

thread. Nylone & Polyster thread used as per application. 50 mm X 50 mm Wooden Legs applied

with polishing. Including all materails. Hardware and labours etc. Completes as per

drawing/Photographs & details and as Directed by Engineer - in - charge Seater Sofa Size:- 1350 x

23 THREE SEATER SOFA 2.00 No. 26064.06

Providing and supply Sofa structure made from 18mm MR Grade plywood supported with Solid

wood, back side and curved part Covered with 3mm flexi ply, sofa arm made from 12mm thick MR

Grade plywood supported with solid wood. Elastic Belt, 75mm board & 2.25 mm thick elastic

webbing stapling in seat frame at 100 mm centre to centre distance, belt fastern in X and Y axies of

seat, elastic belt elongation 45% tensile strength 350 kg. Foam 100 mm X 40 density Premium

Quality foam covered with 25mm X 32 density super soft Premium Quality Foam for soft touch filling

in seat. 50 mm X 40 density Premium Quality foam covered with 25mm X 32 density super soft

Premium Quality foam for soft touch filling in back. Stiching Stiching work done with thread. Nylone

& Polyster thread used as per application. 50 mm X 50 mm Wooden Legs applied with polishing.

Including all materails. Hardware and labours etc. Completes as per drawing/Photographs & details

and as Directed by Engineer - in - charge Seater Sofa Size:- 2100x870x800mm ( H )

24 CENTER TABLE ( 750 X 450 MM) 2.00 No. 4048.08

Providing and Fixing Center table made from 37mm x 37 mm Indian teakwood leg and top frame

made from 37mmx 75mm Indian teakwood having 18 mm thick Ply and 4mm thick Veneer with

melamine polish and 0.8mm thick balancing laminate at bottom for shelf made with surrounding

Indian teakwood frame of size 37 mm x 12 mm. The top having 12 mm thick glass with edge finish to

be placed properly in groove made. Surface to be finished with melamine polish including four

caster wheels in bottom of table all materials and labours etc. complete as per drawing and

instruction of engineer-in charge.

8 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

25 COAT HANGER 2.00 No. 820.12

Providing , Arranging & fixing wooden coat stand made of Indian teakwood size-vertical member

65mm x 65mm size and bottom cross design teakwood member of 75mm (H) x 37mm as per design

with melamine polish including Moulding edges.with teakwood single hanger of standard size

(75mm x 35 mm) along with 2 nos brass hook, including all materials and labours etc. complete as

per drawing and instruction of engineer-in charge. Coat Stand: 650mm x 650mm x 1500mm (H)

26 WARDROBE WITH MIRROR (1800 X 720 X 470 MM) 2.00 No. 6719.53

Providing and Arranging Cabinet made from 18mm thick MR grade Plywood box with one mirror

fixed on shutter with lock with two keys set two Shutter having SS Hinges ( Auto 16 deg.) Handles

and Indian Teakwood Border Patty With Melamine Polish. Cabinet Finish with 4mm thick approved

Veneer and 0.8 mm thick Balancing Laminate to be Provided. On top of the storage 915 mm and

second shelves 400mm and third shelves 350mm Shall be provided including Necessary Fixtures,

Fastening includes all materails and Labours etc. Complete as per drawing and instructions of

Engineer-in-charge. wardrobe with mirror Size :- 1800mm x 720mm x 470mm

27 CROCKERY UNIT ( 600 X 450 X 750 MM) 4.00 No. 2468.44

Providing and Arranging Cabinet made from 18mm thick MR grade Plywood box with one drawer

unit having fixed on telescopic Channel with lock with two keys set one Shutter having SS Hinges (

Auto 16 deg.) Handles and Indian Teakwood Border Patty With Melamine Polish. Cabinet Finish with

4mm thick approved Veneer and 0.8 mm thick Balancing Laminate to be Provided. On top of the

storage 18mm thick approved mirror Polished Granite with Rounding edge Moulding Shall be

provided including Necessary Fixtures, Fastening includes all materails and Labours etc. Complete

as per drawing and instructions of Engineer-in-charge. Crockery Unit Veneer Size :- 600mm x

28 DINNING TABLE WITH 2 CHAIR 2.00 No. 6022.63

Providing and Arranging Dinning Table made from indian Teakwood with legs having size 65mm x

65mm with moulding as per instruction and top framing to be made from 75 mm x 37mm size. Top to

be made from 18mm thick MR grade plywood finish with 4mm thick approved veneer and 0.8mm

balancing laminate on back side with Indian Teakwood beading on sides of size 50 mm x 25 mm and

16mm thick korean stone on top of the table. All veneer surfaces and wooden structure to be

finished with melamine polish including all materials and labour etc.Complete as per drawing and

instruction of engineer-in charge. Dinning Table Size veneer :- 750mmx 750mm x 750mm

9 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

29 CUPBOARD IN WALL (SIZE) 35.00 Sqm. 2784.57

Providing and fixing frame type CB shutter of 18mm thick water proof plywood with ISI quality

1.0mm lamination for outside of frame and cupboard and 0.80mm thick lamination to inside of

cupboard including necessary , hydraulic type S.S. hinges , fixtures , fastenings of standard quality

S.S. with locking arrangement etc complete as per detail drawing and as directed by Engineer-in-

30 FULL HEIGHT CUPBOARD (1100 X 450 X 2100 MM) 112.00 No. 6318.56

Providing, fixing and arranging meterial welded construction excluding leveller construction 0.7mm

thick (+/- 0.07mm) CRCA sheet for shelf, 0.8mm thick (+/- 0.09 mm) High yield strength CRCA sheet

for doors and back, 0.9mm thick (+/-0.08mm) CRCA sheet for all other components, CRCA sheet 'D'

grade high yield strength as per IS : 513. Locking and Handle Mazak handle and three way locking

mechanism with shooting bolt. Shelving height wise adjustable shelf mounting, uniformly distributed

load capacity per each shelf is 40Kg maximum, 4Nos.of adjustable full shelf and box file A4 size

(85w x 345H x 285D) can be stored vertically on three shelves and clear space above fourth shelf is

240mm. Finished with epoxy powder coated to the thickness of 50 microns (+/-10) including all

necessary fixtures, fastners machinary etc. complete as per photographs / Drawing and directed by

Engineer-in-charge.

31 GLASS CUPBOARD (1100 X 450 X 2100 MM) 12.00 No. 14117.78

Providing and Arranging book storage having top 18 mm thick MR grade plywood with 4.00 mm

thick veneer melamine polish finish with 0.8 mm balancing laminate.Shelves made of 12 mm thick

clear float glass with all edge polish. Side and shutter made of 18mm thick MR grade plywood with

4.00 mm thick veneer melamine polish finish with 6mm thick clear float glass and Lock and nylon

bullet including all necessary fixtures and fastenings as approved, incld. all materials and labour

etc.Complete as per drawing and instruction of engineer-in charge ( with T.W. border patti with

melamine polish ) Glass Storage veneer : 1100mm x 450mm x 2100mm (H)

32 ROLLER BLINDS 206.00 Sqm. 2468.44

Providing and Fixing of Blackout Blinds with fabric of 0.53 mm (± 0.05) thickness with top and

bottom channel of Non-Rusting Aluminum Alloy, with 1.25 mm thickness and bottom channel of

mm thickness and 38mm diameter.Control Unit should be of ABS plastic with 1.50 mm polyester

cord with 4.50 mm balls with stop lock arrangement inclusive of all necessary fixtures, fasteners

and fitting etc. Zebra Blinds

10 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

33 LOW HEIGHT PARTITION (5' HEIGHT) 9.00 Sqm. 2616.91

Providing & fixing Aluminum partition system 1500mm ht. made of 60mm thk aluminum having two

separate race way for lying electrical & computer wiring. The wire management shall be through to

the race way to be filled at bottom and other in intermediate of partition, below of work surface. The

connection L, T, + should be made through an aluminum square of 60.5 mm in 1.4mm mm thk. The

square section should have a bottom leveler plate of Zinc die cast and should accommodate End

trim (PVC) to cater +’, -‘and T’ type of configurations in desired color. The top of the square should

be covered with a square cap made of PVC. All the end trims of the partitions should be provided

with a decorative colored Plastic Beeding inserted in to the powder coated aluminum sections in

order to enhance its look. All aluminum section / component should be epoxy powder coated as per

IS: _ 733:1983 Laminated / Marker region should made of 4mm Prelam MDF Board. Fabric magnetic

region should be made 4mm plain MDF with .63mm G.I. Sheet with fabric wrapped on both side.

Fabric Pin-Up board should be made of high quality 12mm Pin-Up board wrapped with fabric

Polyester 340grm/line Mtr on both sides.as per instruction of the consultant.

34 FULL + HEIGHT PARTITION 98.40 Sqm. 2330.07

Providing and fixing modular partition full height with whole frame structure of Aluminium extruded

alloy section with all sections powder coated (50 micron) having overall partition thickness 80mm

(double skin) flush on both sides and twin layers of 5mm thick glass snap fitted with aluminium

locking sections. It should be removable for maintenance. Horizontal venetian blinds with swiveling

mechanism are provided between two glasses with out side control with no screwing or gluing etc.

visible. Panels should be 12mm thick pre laminated boards as per instruction Engineer in charge.

35 CANTEEN TABLE & 4 STOOLS (1200 X 900 MM) 6.00 No. 13920.83

Providing and fixing Stainless steel 304 Grade 8 seater Dining table with round shape 4 S.S. sitting

stool with sleek and minimalist style with foldable SS stools , legs are constructed with 16-gauge

,202- grade stainless steel square tube etc complete as per drawing and EIC.

36 CANTEEN SERVICE TABLE (1200 X 750 MM) 3.00 No. 9082.93

Providing and fixing Stainless steel 304 Grade 1200 X 750 MM Rectangular Service table with 4 S.S.

leg with 1 shelves sleek and minimalist style with legs are constructed with 16-gauge ,202- grade

stainless steel square tube etc complete as per drawing and EIC.

11 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

37 STORAGE RACK (1100 X 450 X 2100 MM) 58.00 No. 2270.48

Providing and fixing open type storage rack of size 1100 x 450 x 2100 mm size with 5 compartments

6 Nos. of shelves 0.90 mm thick with adjustable arrangement and manufactured with sloped angle

40 x 40 x 2 mm thick. The rates shall be essamballed with G.I. bolts, nuts and washers all material

shall be with 10 tank anti-rast treated and as directed by Engineer-in charge

38 CONFERENCE TABLE ( 20 Cap) 9.00 Sqm. 26064.06

Conference Table, Table Size: As required : Providing and supplying Conference table made with

using 19mm TH Plywood . structure finished with solid, non-porous surfacing "CORIAN" material

homogeneously composed of ±1/3 acrylic resin (also known as Polymethyl Acrylate or PMMA), and

±2/3 natural minerals & 1.00 mm thk. liner Laminate inside as sheet approved by architect & nylon

adjustors fixed with necessary fixtures and fastening (Hardware) as per architect drawing. Top

portion of conference table all edges shall be covered with required Teak wood beading Patti or

Molded Laminate sheet finished with approved melamine polishing work. The table shall also

provision for carrying wires & mounting electrical plug point, switches & milk etc. Complete as per

architect drawings and as per instruction of architect & engineer in charge.

39 PATIENT BED (1800 X 750 MM) 1.00 No. 5976.17

Providing and supply Patient bed size 1800 x 750 mm welded with ERW MS tube (18 G) in M.S. Cover

made from (16 G) ERW tube with back rest of minimum 45% of the frame length and back rest angle

65 degree with four corneer with rubber buffers and head and foot panels shall be ABS plastic and

bracking and locking of 4 castor roller wheels mechanism and 4"uform sleep/kurlon mattress with

set of bedsheet and pillow with cover with all necessary hardware included. other as per EIC

40 SINGLE BED IN PRISON (1800 X 900MM) 2.00 No. 3731.95

Providing and supply wooden bed made of 18mm thick mr grad plywood under horzontal and

vertical fram.12mm thick Plywood with 0.8mm back laminate for putthi.Headrest and foot rest and

side support made of 18mm thick Plywood with 1mm back laminate finish.4"uform sleep/kurlon

mettress with 1 set of bedsheet and pillow with cover with all necessary hardware included. Bed

Size :- 1800mm x 900mm x 450mm

41 CARDLES 3.00 No. 1121.10

Providing and arranging Ms Cradle Having overall size of 102cm x 67cm x 94cm and minuim overall

weight of 15kg with shall be provided including all Necassary Materail, Labour, Testing etc complete

as directed by engineer in charge.

12 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

42 NURSING STATION 1.00 No. 5598.43

Providing and fixing NURSING STATION WALL MOUNTED size of 570 x 855 x 95 mm with HDPE

material , maximum load carrying capacity of 25 Kg and model sleeping including necessary

fixtures etc. complete as per direction of the Engineer in Charge.

43 PERIODICAL DISPLAY DESK 2.00 No. 1342.29

Providing & Supplying PERIODICAL DISPLAY DESK / MAGAZINE STAND for Judge's Library having

dimensions - 1200 X 600 X 300 mm; WITH 4 TRAY AND 4 POCK with powder coated smooth finish

alloy steel etc. complete as per direction of the Engineer in Charge.

44 KEY CABINET SIZE 520 X 500MM 1.00 No. 1870.52

Providing & fixing Steel Back key cabinet for 40 keys having overall size of 520mm (W) x 50mm (D) of

500mm (H) of 13mm Anodised aluminum single & double frames. Back steel sheet is grey colour

powder coated with 40 nos punched holes for key chain with steel wire rings numbered 1 to

having corners of ABS in grey colour. Cabinet should with 1 no of lock with 2 nos of keys & top cover

in 3 mm thick acrylic sheet including all necessary fixture, faster, fittings, labours material

machinery etc complete as selected and directed by engineer in charge Key Cabinet : size : 520mm

45 NOTICE BOARD 2.00 No. 1342.29

Providing & fixing notice board having 9mm soft board as a core material 1mm laminate sheet as

back material & surface of 1.0 mm felt cloths, having profile of heavy alluminium fluted anodized

profile 10 to 12 micron of 18mm to 25mm thick board ‘C’ channel & corner is made up of molded

virgin ABS grey colour hanging vertical & horizontal hanging facility as per selected colour & size

including all necessary fixture, fasteners, fittings , labour, material, machinery etc. complete as

selected and directed by Engineer-in-charge.

Notice Board : size - 900 mm x 1200 mm

46 NATIONAL EMBLEM 5.00 No. 1498.84

Providing and fixing 12" x 12" bronze metal glossy finish Indian national emblem including all

materials and labours etc complete as per detail drawing and directed by engineer-in-charge

13 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

47 DIAS (LVL 30 CM FROM FFL) 48.00 Sqm. 2834.06

Providing And Arranging Dias Platform 300 mm ht. for Court having overall thickness of Top 40 mm

(18+18+4mm)18 mm thick MR Grade plywood , Leg 40 mm provided at 1000 mm c/c in all direction

thick Indian teakwood and veneer/Synthetic Carpet at top with PU polish finish Top to be made

from 50 x 40 mm Indian teak wood with half round moulded on long side with PU polish. Appron

having 18 mm thick MR Grade plywood with 4.00 mm thick veneer having PU polish finish. having all

Structure 18 mm thick MR grade plywood with veneer and teakwood border of specified size with

PU polish finish. necessary fixtures and fastening as approved with balancing laminate inside

mm thick of approved shade including Steps all materials and labour etc. Complete as per drawing

and instruction of engineer-in charge.

48 NYAY NI DEVI STATUE 1.00 No. 134368.38

Providing & Fixing FRP mural of 'Statue of Justice' having height of 2.50 mt., base foundation of

X 1.20 mt. with Copper Finish as approved and fixing it with appropriate S.S/brass screw and joining

with adequate sealant etc. complete as per direction of the Engineer in Charge.

49 LOCKER-CABINETS 3.00 No. 14177.37

Providing & Supplying Personal Lockers for Barroom having dimensions - 400 (L) X 905(W) X

1850(H) mm; 15 Lockers/Unit, for storing personal items in safe and secure way and space saving

unit made using CRCA steel powder coated smooth finish with locking arrangement etc. complete

as per direction of the Engineer in Charge

50 SANITARY NAPKIN DISPENSER 4.00 No. 4027.88

Providing and fixing SANITARY NAPKIN DISPENSER WALL MOUNTED size of 720 x 170 x 320 mm

with Push button and automatic working method and body with CRC material with anti corrosive

powder coated steel with one sanitary napkin mechanism including necessary fixtures and

instruction by EIC

51 SANITARY NAPKIN INCINERATOR 4.00 No. 3357.24

Providing and fixing SANITARY NAPKIN INCINERATOR WALL MOUNTED size of 250 x 250 x 350 mm

with 2 Mtr Exhaust pipe length,Burns capacity 80-100 napkins per day and machine comes with

MCB protection and shock proof body including necessary fixtures and instruction by EIC

52 BABY DIAPER CHANGING STATION WALL MOUNTED 3.00 No. 5597.42

Providing and fixing BABY DIAPER CHANGING STATION WALL MOUNTED size of 570 x 855 x 95 mm

with HDPE material , maximum load carrying capacity of 25 Kg and model sleeping including

necessary fixtures and instruction by EIC.

14 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

53 BIG SIZE DUSTBIN ( 100 LTR.) 6.00 No. 1342.29

Providing and Arranging of 100 Litre capacity LLDPE solid waste bin having size at top 500 mm &

bottom 350 mm square, height 900 mm having standard weight as per the manufacturer's

specification of 1 unit including all necessary fixture, fastners, fittings, labour material machinery

etc complete as selected and directed by Engineer In charge.

54 MEDIUM SIZE DUSTBIN ( 50 LTR.) 4.00 No. 888.80

Providing and Arranging of 50 Liter capacity LLDPE solid waste bin having size at top 500 mm &

bottom 350 mm square, height 900 mm having standard weight as per the manufacturer's

specification of 1 unit including all necessary fixture, fasteners, fittings, labour material machinery

etc complete as selected and directed by Engineer In charge. Dustbin Big 50 lit

55 STEEL DUSTBIN 44.00 No. 487.83

Providing and Arranging S.S. Nickle chrome plated Dustbin having 254mm dia. & 356mm height with

perforated S.S. sheet having thickness 18G including all necessary fixture, fasteners, fittings,

labours, materials, machinery etc. complete as selected and directed by Engineer-in-charge.

56 POLL MOUNTED DUSTBIN MEDIUM SIZE 2.00 No. 4100.60

Providing and Arranging of pole mounted dustbin of 100 Liter capacity made up of LLDPE solid

waste bin having WIDTH 759mm and height should be 1924mm having standard weight as per the

manufacturer's specification of 1 unit including all necessary fixture, fasteners, fittings, labour,

material, machinery etc. complete as selected and directed by Engineer-in-charge.

57 WALL CLOCK 32.00 No. 1115.04

Providing and fixing wall clock of the desired shape and design as selected by engineer in charge

58 ALLUMINIUM LADDER 4.00 No. 3891.53

Providing and supply ladder made from 67mm x 31mm x 3.15mm high tensile aluminum "C" section

is 400mm with rubber shoes at the bottom of ladder. Height shall be 8 feet Stymer - Ladder Size : 8'

15 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

59 WHEEL CHAIR 4.00 No. 4837.90

Providing & arranging Wheel chair for Physically Hanicapped person having. Dimension 790 (L) X

600 (W) X 70 (H)MM . WITH FOLDABLE FRAME Structure made of carbon steel setction 22 x 1.2 mm.

A3 carbon sheet with crome finish cross bars made of A3 carbon Steel material with setcion 25.4 x

1.2mm , 24 inch solid mag wheels with alloy in the in the rim, hand rim of section 16 x 1.2 mm .

carbon steel with chrome finish, front wheel of 8 inch hub made of PA polymer and outer side of

solid rubber pu moulded armrest & base made of abs , leather finish calf rest and seat with cushion

alumuinum footrest with with updown movement having extended base footpress with moulded

plastic including handbrakes & full structure is anti rust chrome finish with user capacity of 100kg.

Including all neccasary fixture, fatser,fittings, labours materails machinary etc complete as selected

and directed by engineer incharge

60 TROLLY (FOR RECORD TRANSFER) 5.00 No. 5528.74

Providing & Arranging fabricated trolly of size 36” x 18” x 34” ht. with goods carriage capacity of

250kg. made up from 40 mmx 40 mm 16 guage M.S. pipe with 16G sheet having 1" 16 gauge CRC

ROUND PIPE and whole unit is covered with MS round bar mesh including epoxy polymer powder

coating 50 micron thick with 100 mm nylon castor at bottom for smooth movement including all

fixtures , fasteners , labour , material etc comp. as selected and directed by Engineer In charge.

61 WOODEN PEN HOLDER 7.00 No. 365.62

Providing and placing of wooden pen holder with two to four pen holder and with Indian flag etc

complete as per EIC

Providing and supply Mechanical Locking System.safe provides protection to your data from fire

heat, dust, moisture & unauthorized access.Seven Tank Anti Corrosive Treatment for all steel

components size :- 21" x 21" x 27"

63 DIGITAL CASH BOX 1.00 No. 8583.99

Providing and supply Digital Cash Box 12"W x 9"D x 9"H approx. wt. 10 kg.volume: 11 liters.Digital

display with motorized locking unlocking system Dual password facility.master key in case of

emergency. Make - Digital Display Safes.

64 FOOT REST 11.00 No. 743.36

Providing and Arranging FOOT REST made up of high impact polystyrene having over all size

mm x 350 mm with tilts of 0o to 20o for angular movement and non slippary platform surface

including all materials and labour etc. complete as per drawing / Photographs and instruction of

engineer-in charge.

16 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

65 MOBILE STORAGE 18.00 Cum. 16191.31

Providing & fixing compactor of Base frame fabricated from cold formed channel & angle sections

of 10/14 Gauge Thick HRC material and sections Sizes of 25 x 100 x 25 mm, 25/45 x 100 x 25/45

mm, 45 x 45 mm with guide rails comprises of solid round shaft of  30 mm (Bright bar) in ground

finish, press fit in to cold formed 'U' channel made from 14 G Thick material completely grouted

within the floor with 0 – 0 levelling having 4 Nos. of Cast Iron Wheels of Size : 128 X 28mm

(moving on a pair of rails) for units of lengths less than 3540 mm. All units more than length 3540 mm

shall have 6 nos. of cast iron wheels of size 128 x 28 mm (moving on 3 Nos. of rails). The Driving

wheel will comprise of a central hub resting on a pair of roller bearings with 3 insertable arms

engaging into the hub. Boltless type shelves made of 22 SWG C.R.C.A, quality steel having 8 folds

each designed to carry a U.D.L. of 50 Kgs. Vertical and central panels made out of 22 SWG mm

thick C.R.C.A. The ‘UNI-LOCK’, or the individual unit lock is a specially designed mechanism

embedded in the hand wheel body itself with a central lock to enable locking of the entire system

with one key with stoppers on either ends of the rails to prevent the Compactor unit from moving

away from the rail including all necessary fixture, fasteners, fittings , labour material machinery etc

complete as selected and directed by Engineer In charge.

66 Wooden paneling Veneer 333.00 Sqm. 2863.35

Providing and fixing wooden panneling made of framing the skeleton(plywood frame structure)with

18mm + 18mm thick MR grade plywood for vertical and horizontal plywood (patti) one side cover

with 6mm thick MR grade plywood for grooving as per design. Fixing properly without any air gap

and finishing with selected 4.00 mm thick Veneer sheet with Melamine Polished. Before installation,

make hole/face plate for conduit pipes of electrical/networking cables with openable stud from

partition Including all materials and labour etc.complete as per detail drawing and instruction of

engineer-in charge. Wooden Pelmet Veneer

67 NEWS PAPER READING DESK 1.00 No. 2090.70

Providing and Supplying Double sided (Two display panels at opposite ends) news paper top made

by wooden and stand with MS stand overall height of stand size between 1450 and 1600mm and

each display panel size between 650and 750mm with fixture and fastening work shall be done as per

drawing & sample approved as directed by the Engineer in Charge.

17 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

68 MAHATAMA GANDHIJI PHOTO 2.00 No. 888.80

Providing and Fixing Photo Frame of Mahatma Gandhiji made of Teakwood Border Patti of size 1" x

1/2" with melamine polish finish with 3 mm glass and inside the picture of Mahatma Gandhiji on

Photo paper with high resolution picture quality and sticked on MDF as selected by engineer-in-

charge including all necessary fixture, fasteners,labour , material etc comp.

69 ACRALIC WORK TOP 4.00 No. 928.19

Providing and Arranging arylic work top with 10mm clear imported Acrylic sheet with two brass

rods with height adjustable of overall size 580 mm x 400 mm etc complete as directed by engineer in

70 SLOPPED FILE STAND/ ARGUMENT DESK 8.00 No. 3357.24

Providing and Arranging Two side argument small desk made of 18mm thick MR grade plywood

having Desk Size : 600mm x 450mm & front height 450mm back height 400mm ( i.e. slanting

position) with wooden teakwood patti for frame & to hold paper and pen. Top and side 18 mm thick

finish with 4mm thick veneer both side.all veneer & T.W.surface to be melamine polish. Argument

Desk Size :- 600mm x 450mm x 300 /

71 DRAFTING TABLE 2.00 No. 5726.70

Providing and supply Ideal for offices, institutional and home applications Comes with table top

Pencil / Accessories tray attached Height Adjustment : 753 – 1164mm Load Capacity : Dynamic –

15kg, Static – 100kg Top angle adjustment up to 450 (8 step) Table-Top size: 1200 (W) x 680 (D) x

72 SMALL BATHROOM CABINET WITH MIRROR 2.00 No. 592.87

Providing and fixing premium type bathroom cabinet with size of 805 x 508 x 100mm including mirror

on back of door and interior back of cabinet including required fixing hardware and labour etc

complete as directed by EIC

73 WOODEN RECLINER CHAIR (FOR JUDGE CHAMBER):- 2.00 No. 18142.63

Providing & Supplying Teak Wooden Chairs with suitable size of ottoman for Judge having size of

690 (W) X 880 (D) X 850 (H) mm, made out of Special Indian teakwood inframing, seat and back rest

with smooth & curved edges in arm rest, seat and back, Cushioning of PU foam 40 Density in Seat &

back shall have 32 density foam of 125MM thickness with LEATHER or Cotton premium fabric

Tapestry designed to give comfort with quality etc. using with requisite no. of coats of melamine

polishing, plastic buffers, etc. The cost including loading, unloading and Transportation Charges

ect. As per choice of users department and Concern officers in charge as directed by the engineer

18 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

74 Table Glass 90.00 Sqm. 734.27

Providing and fixing 5MM THICK TABLE TOP GLASS for various size of table including diamond cut

polish edge etc complete as per directed by EIC.

Net Total of Furniture Items

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below Percent [should be written in figures

and words] of the estimated rates mantioned above. Amount of my/our tender works out as under

Estimated Amount : # Estimated Amount :

Put to tender Rs. : . Put to tender Rs. :

Deduct % below Rs. . Add % above Rs.

Net Rs. . Total Rs.

In words : . In words :

(# Please strike out whichever is not applicable)

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Jamjodhpur (R & B) Sub Division Jamnagar (R & B) Division

Jamnagar. Jamnagar.

1) The work shall be carried out as per Public Works Department Hand Book, I.S. Specification and other specification of the Division or

2) All the columns in Schedule should be filled in INK and the total of the entries in the last column should be strike out by the Contractor

under his Signature.

3) Rates should include clearance of site (Prior to commencement of work and its close) in all respect and good for work under all

conditions of site moisture weather etc.

19 of 20 DTP of Court furniture work 07-26

Sr. Item of work QTY Unit Rs. In Amount

4) The Contractor shall exhibit the details of works, Tenders amount and specification as per Govt. Circular No. TD 32772 N. Dt. 26-4-78

and as per G.R. No. TNC-9-24-C, Dt. 18-11-91, as directed by Engineer-in-Charge of the works, on board at site of the work.

5) Contractor shall even "NIL" percentage, if no deduction is offered.

6) Testing of materials shall be as per statement attached with the specification. The material shall be tested in GERI Bill for the testing

shall be paid by the Executive Engineer and 1% of amount put to tender after deducting the cost of materials to be supplied by

Department as per SCHEDULE 'A' at the sanctioned estimate rates from the Contractor in Running Bills. (As per G.R.No. (R&B) TNC-

7) For R.C.C. Item where there is change of grade mix or charge as per actual mix design the difference of cement consumption shall be

deducted from rate of original item at the rate of star rate mentioned in the tender.

8) 1% L.C. shall be deducted from the bill as per agreement.

9) GST will be paid extra as per Govt. Emendment.

10) GST and Income tax will be deducted at source while making payment of bills

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Jamjodhpur (R & B) Sub Division Jamnagar (R & B) Division

Jamnagar. Jamnagar.

20 of 20 DTP of Court furniture work 07-26