Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-AOC 3 178 KERALA INDIA | PALAKKAD | KERALA | 678001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹3.1 L+₹7,898 (2.63%)Rejected-AOC NIRAMARUTHUR GRAMA PANCHAYAT NIRAMARUTHUR P O TIRUR 676 109 | MALAPPURAM | KERALA | 676109 | L2 | Rejected-AOC L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | Shamsudheen L2 | LATHEEF A P L3 | Rasheed L1 |
|---|---|---|---|---|---|---|
| 1.00STAGE | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 17.75 | cum | 330.41 ₹5,863.13 | 272.5 ₹4,835.51 | 260.87 ₹4,629.14 Lowest |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 1.01 | cum | 6,500 ₹6,591 | 6,009.6 ₹6,093.73 | 5,752.7 ₹5,833.24 Lowest |
| 1.00 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) | 3.62 | cum | 7,000 ₹25,354 Lowest | 7,945.8 ₹28,779.69 | 7,606.15 ₹27,549.48 |
| 1.00 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 314.64 | kilogram | 103 ₹32,407.92 | 85.2 ₹26,807.33 | 81.53 ₹25,652.6 Lowest |
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 9.08 | sqm | 250 ₹2,270 Lowest | 292.5 ₹2,655.9 | 280.03 ₹2,542.67 |
| 1.01 | OD280380/2025-2026:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, benting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,195.79 | kg | 140 ₹1,67,410.46 Lowest | 152.6 ₹1,82,477.4 | 151.58 ₹1,81,257.7 |
| 1.01 | OD280352/2025-2026:Providing and fixing Curved shape precoated galvanised iron profile sheets (size,shape pitch of corrugation as approved by Engineer in charge 0.50mm(+0.05%) total coated thicknesswith Zinc coating l50gmsper sqm as per IS -277 in 240mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer in charge . The sheet shall be fixed using self drilling
/self tapping screws of size (5.5x55mm) with EPDM seat,comp1ete upto any pitch in horizontal/verticalor curved surface ,excluding the cost of purlins ,rafters,and trusses and including cutting to size and shape wherever required. | 77.44 | sqm | 700 ₹54,208 | 533 ₹41,275.52 | 473.7 ₹36,683.33 Lowest |
| 1.01 | OD159749/2025-2026:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent including
clamp; testing of joints complete as per direction of
Engineer in charge. 90 mm dia 6 Kg/cm2 | 13.5 | metre | 500 ₹6,750 | 618.6 ₹8,351.1 | 473.7 ₹6,394.95 Lowest |
| 1.01 | OD160657/2025-2026:Supplying and fixing half split PVC gutter 200 mm size with MS flats 200x5 mm size@60 cm
c/c fixing on roof members (purlin or rafters),bolts ,nuts and washers etc. including making necessary connections with rain water pipes complete. | 19.5 | metre | 250 ₹4,875 Lowest | 618.6 ₹12,062.7 | 434.22 ₹8,467.29 |
Tender Value
₹3.8 L
EMD Value
₹9,523
Closing Date
13 Oct 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer LID EW Section Kodiyathoor GP
Assistant Engineer LID EW Section Kodiyathoor GP
GENERAL-KODIYATHUR G.P Project 311/26-STAGE ROOFING AND RELATED W O R K S F O R G M U P S C H O O L KODIYATHUR-General Civil Work
2025_LSGD_805044_1
AE LID-EW TENDER -10-2025-26
Open Tender
Civil Works - Buildings
Item Rate
Assistant Engineer LID EW Section Kodiyathoor GP
Please refer Tender documents.
9 documents required · 9 mandatory
₹840
Yes
₹9,523
Yes
29 Dec 2025
4 Oct 2025
15 Oct 2025
4 Oct 2025
13 Oct 2025
4 Oct 2025
Amount
STAGE
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
OD280380/2025-2026:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, benting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD280352/2025-2026:Providing and fixing Curved shape precoated galvanised iron profile sheets (size,shape pitch of corrugation as approved by Engineer in charge 0.50mm(+0.05%) total coated thicknesswith Zinc coating l50gmsper sqm as per IS -277 in 240mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer in charge . The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seat,comp1ete upto any pitch in horizontal/verticalor curved surface ,excluding the cost of purlins ,rafters,and trusses and including cutting to size and shape wherever required.
OD159749/2025-2026:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent including clamp; testing of joints complete as per direction of Engineer in charge. 90 mm dia 6 Kg/cm2
OD160657/2025-2026:Supplying and fixing half split PVC gutter 200 mm size with MS flats 200x5 mm size@60 cm c/c fixing on roof members (purlin or rafters),bolts ,nuts and washers etc. including making necessary connections with rain water pipes complete.
OD160194/2025-2026:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 90 mm dia Bend
Shamsudheen (BID ID -2384847)
LATHEEF A P (BID ID -2382927)
Bidder Name
Shamsudheen
Rasheed
LATHEEF A P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1339833.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .