Up-Gradation of fire station for four fire tenders along with control room, conference room & dormitory for fire and disaster team at GIDC Umargam.

Name of Work: Up-Gradation of fire station for four fire tenders along with control room, conference

room & dormitory for fire and disaster team at GIDC Umargam.

Sr.N Item Item Description Qty. Unit Rate Amount

1. 1. Clearing and grubbing road land 0.20 Hect. 28393.04

including uprooting rank vegetation

grass bushes, shrubs, sapling and trees

girth up to 300 mm removal of stumps

of trees cut earlier and disposal of

unserviceable materials (C) By

mechanical means in area of light jungle

2. 2. Excavation for foundation in Loose or 1381.00 Cu.Mt 117.08

soft soil up to 1.5 m. depth including

sorting out and stacking of useful

materials and disposing of the excavated

stuff within GIDC Estate as directed by

engineer in charge.

3. 3. Excavation for foundation in Loose or 693.00 Cu.Mt 129.81

soft soil 1.5 m. to 3.0 m depth including

sorting out and stacking of useful

materials and disposing of the excavated

stuff within GIDC Estate as directed by

engineer in charge.

4. 4. Excavation for foundation in Dense or 72.00 Cu.Mt 175.97

Hard soil 3.0 m. to 5.0 m depth including

sorting out and stacking of useful

materials and disposing of the excavated

stuff within GIDC Estate as directed by

engineer in charge.

5. 5. Filling available excavated earth 1841.00 Cu.Mt. 130.39

(excluding rock) in trenches. plinth,

sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating

each deposited layer by ramming and

6. 6. Filling in foundation and plinth with 842.00 Cu.Mt 289.06

murrum or selected soil in layers of

20cm. thickness including watering,

ramming and consolidating etc.

complete. (upto 10 ton)

7. 7. Applying general insecticide pest 644.00 Sq.Mtr 89.28

control treatment to floors, cupboards

etc. including labour, material etc.

complete. Using Hepta chloride 20 EC.

As per 6113 pests’ concentration weight

0.50 % is recommended one-liter

chemical emulsion dilute with 39 liters

of water will give. Total dilute

concertation will be 40 liter inclusive of

one-liter chemical emulsion application

0.5 Liter chemical / Sqm of surface is

recommended as per I.S.

8. 8. Filling in plinth with sand under floors 167.00 Cu.Mt 460.19

including watering ramming,

consolidating and dressing complete

9. 9. Providing and filling rubbles including 250.00 Cu.Mt 1473.22

hand packing and filling interstices with

quarry spalls behind abutments and

between returns as directed. (upto

10. 10. P/L PCC 1:3:6 (1-cement: 3 coarse 286.00 Cu.Mt 3172.71

sands: 6 M/c stone aggregate 20 /

40mm nominal size) in foundation

concrete / floor concrete incl. machine

mixing, ramming, consolidation &

curing etc. incl. cost of form work if

required etc. complete at all levels. (In

Foundation & plinth)

11. 11. Providing and laying controlled cement 242.00 Cu.Mt 4537.98

concrete M-250 for RCC work as per

detailed drawings including centering,

shuttering (Only Fresh Ply), machine

mixing, vibrating, scaffolding, curing,

centering having double or more height

wherever required & finishing etc. but

excluding cost of reinforcement etc.

complete at all levels for RCC FOOTING

12. 12.A. Providing and laying controlled cement 48.00 Cu.Mt 6748.24

concrete M-250 for RCC work as per

detailed drawings including centering,

shuttering (Only Fresh Ply), machine

mixing, vibrating, scaffolding, curing,

centering having double or more height

wherever required & finishing etc. but

excluding cost of reinforcement etc.

complete at all levels A) RCC COLUMN

13. 12.B. B) RCC PLINTH BEAM 87.00 Cu.Mt 5810.72

14. 12.C. C) RCC Grad Slab 127.00 Cu.Mt 7291.87

15. 12.D. D) RCC WALL 21.00 Cu.Mt 6599.45

16. 13. Providing Epoxy coated TMT Bar FE- 74090.00 Kg. 76.21

500D reinforcement for R.C.C. work

including bending, binding and placing

in position complete upto floor two level

17. 14. Brickwork using common burnt clay 127.00 Cu.Mt 4021.02

building bricks having crushing strength

not less than 35 Kg. /Sq.Cm. in

foundation and plinth in cement Mortar

1:6 (1-Cement :6-finesand)

(B)Conventional

18. 15. Half brick thick honey- comb brick work 5.00 Sq.Mtr 307.58

with common burnt clay building bricks

having crushing strength not less than

35Kg/Sq.Cm. (i) In Cement Mortar 1:4 (

1- Cement : 4 - coarse sand)

19. 16. Providing & laying 15 mm thick cement 262.00 Sq.Mtr 171.80

plaster in single coat in CM 1:3 (1-

cement : 3-sand) on rough & fair side of

RCC / brick masonry, ceiling, any other

surface for interior & exterior

plastering as per architectural design /

drawings incl. making 10 x 10 mm or as

specified grooves as per pattern given in

the architectural drawings incl. drip

moulding & finished even and smooth

with neat cement slurry incl. racking out

joints, cleaning, curing, scaffolding, etc.

complete at all floor levels

20. 17. P/L 20 mm thick sand faced plaster on 825.00 Sq.Mtr 300.66

wall up to any height consisting of

12mm thick backing coat of cement

mortar 1:3 (1-cement : 3 sand) & 8mm

thick finishing coat of cement mortar 1:1

(1-cement : 1-sand) as per architectural

design / drawings incl. making 10 x

mm or as specified grooves as per

pattern given in the architectural

drawings incl. racking out joints,

cleaning, drip mounding, curing,

scaffolding, etc. complete at all floor

levels. used wooden godka

21. 18. Filling in foundation and plinth with 3.00 Cu.Mt 600.56

brick Bats Chhara in layers of 20cm.

thickness including watering, ramming

and consolidating etc. complete.

22. 19. Carrying out plinth treatment to post 538.00 Sq.Mtr 124.28

construction / existing structure by

spraying chemical solution for TERMITE

CONTROL TREATMENT including

labour and material consistent with I.S.I.

specification. Using Chlordane and

Chiorpurfiles 20 EC. As per 6131_paret-

II Concentration weight one percent is

recommended i.e. one liter 20 EC

chemical emulsion with 19 liter give 1%

concentration inclusive of one-liter

chemical emulsion application at the

rate of 5 Liter / Sq.m of surface is

recommended as per I.S. Etc. complete

as directed by EIC.

23. 20.A. Providing and laying controlled cement 38.00 Cu.Mt 10836.57

concrete M-250 for RCC work as per

detailed drawings including centering,

shuttering (Only Fresh Ply), machine

mixing, vibrating, scaffolding, curing,

centering having double or more height

wherever required & finishing etc. but

excluding cost of reinforcement etc.

complete at double height Level. A) RCC

COLUMN AT DOUBLE HEIGHT

24. 20.B. B) RCC BEAM AT DOUBLE HEIGHT 44.00 Cu.Mt 10980.40

25. 20.C. C) RCC SLAB AT DOUBLE HEIGHT 49.00 Cu.Mt 13661.23

26. 21.A.1 Providing and laying controlled cement 41.00 Cu.Mt 6748.24

concrete M-250 for RCC work as per

detailed drawings including centering,

shuttering (Only Fresh Ply), machine

mixing, vibrating, scaffolding, curing,

centering having double or more height

wherever required & finishing etc. but

excluding cost of reinforcement etc.

I) RCC COLUMN AT GF & FF LEVEL

27. 21.A.2 (A) RCC COLUMN 48.00 Cu.Mt 6788.34

II) RCC COLUMN AT Terrace LEVEL

28. 21.B.1 (B) RCC BEAM 57.00 Cu.Mt 6178.57

I) RCC BEAM AT GF & FF LEVEL

29. 21.B.2 (B) RCC BEAM 52.00 Cu.Mt 6218.67

II) RCC BEAM AT Terrace LEVEL

30. 21.C.1 (C) RCC SLAB 37.00 Cu.Mt 7291.87

I) RCC SLAB AT GF & FF LEVEL

31. 21.C.2 (C) RCC SLAB 72.00 Cu.Mt 7331.96

II) RCC SLAB AT Terrace LEVEL

32. 21.D.1 (D) RCC LINTEL & COPING 56.28 Cu.Mt 6483.82

I) RCC LINTEL & COPING AT GF & FF

33. 21.D.2 (D) RCC LINTEL & COPING 76.00 Cu.Mt 6523.91

II) RCC LINTEL & COPING AT Terrace

34. 21.E.1 (E) RCC CHHAJJA 10.00 Cu.Mt 5971.78

I) RCC CHHAJJA AT GF & FF LEVEL

35. 21.E.2 (E) RCC CHHAJJA 3.00 Cu.Mt 6011.87

II) RCC CHHAJJA AT Terrace LEVEL

36. 21.F (F) RCC STAIRCASE 18.00 Cu.Mt 7029.32

I) RCC STAIRCASE AT GF & FF LEVEL

37. 22. Trimix: Constructing the plinth slab/rcc 1977.00 Sq.Mtr 373.70

road with Ordinary cement concrete M-

250 Grade (excluding the cost of

concrete & reinforcement) mixed with

polyester fiber (12mm) @ rate of

gms. per 50 Kg. of cement with Trimix

Vacuum dewatering system with power

troweling sheet form work with M.S.

channels, shrinking of fair hardness,

non-oxidizing, Nonmetallic, heavy duty

floor hardener of FOSROC or equivalent

at the rate of 4.00 Kg. /Sq.M. with 10 mm

x 10 mm size groove cutting in concrete

as construction joint and 12 mm thick

premix expansion joint at every

Meter length. Providing and pouring

sealant of FOSROC or equivalent with

necessary equipment, labors etc.

38. 23.I Providing Epoxy coated TMT Bar FE- 67652.00 Kg. 76.21

500D reinforcement for R.C.C. work

including bending, binding and placing

in position complete upto floor two level

I) UP TO GF & FF LEVEL

39. 23.II II) ABOVE AT Terrace LEVEL 45550.00 Kg. 77.21

40. 24.I Brickwork using common burnt clay 330.00 Cu.Mt 4295.99

building bricks having crushing strength

not less than 35 Kg./Sq.Cm. cement

Mortar 1:6 (1-Cement :6-fine sand) (B)

Conventional I) UP TO GF & FF LEVEL

41. 24.II II) ABOVE AT Terrace LEVEL 65.00 Cu.Mt 4336.18

42. 25 Half brick masonry in common brunt 271.00 Sq.Mtr 716.37

clay building bricks having crushing

strength not less than 35Kg/Sq.Cm. in

Cement mortar 1:3 (1-Cement:3-

coarsesand) with 2 Nos of 6mm Mild

stee round bars after every three-course

embedded in Cement Mortar in

foundation and plinth I) UP TO GF & FF

43. 26.I Providing 10mm thick cement plaster in 642.00 Sq.Mtr 189.15

single coat on brick/concrete

walls/ceiling for interior plastering upto

two floor level and finished even and

smooth in (ii) Cement mortar 1:4 (1

cement : 4 Sand)& finishing with a

floating coat of neat cement slurry. at GF

I) UP TO GF LEVEL

44. 26.II II) FIRST FLOOR & ABOVE AT 852.00 Sq.Mtr 210.47

45. 27.I Providing 15mm thick Cement Plaster in 2771.00 Sq.Mtr 153.20

single coat on brick/concrete wall for

interior plastering upto floor two level

finished even and smooth in Cement

mortar 1:4 (1-cement :4-sand) at GF I)

UP TO GF & FF LEVEL

46. 27.II II) ABOVE AT Terrace LEVEL 102.00 Sq.Mtr 176.59

47. 28.I Providing 20 mm thick double sand 1526.00 Sq.Mtr 300.66

faced cement plaster on walls up to

height 10 meters above ground level

consisting of 12mm thick backing coat of

CM 1:3 and 8mm thick finishing coat of

CM 1:1 (1cement: 1 sand) etc.

complete.at GF I) UP TO GF & FF LEVEL

48. 28.II II) ABOVE AT Terrace LEVEL 295.00 Sq.Mtr 307.19

49. 29 Rustic Scratch wall texture created by 1821.00 Sq.Mtr 353.50

applying Rustic Scratch material with

the thickness of 2mm to 3mm over

mm outer plaster.

50. 30. Providing throating or plaster drip and 45.00 Rmt. 42.17

mounding to R.C.C. Chhajja or

51. 31. Providing Cement Vata (10cm x 10 cm) 52.00 Rmt. 23.68

size quarter round in cement mortar 1:

1 including neat cement finishing,

watering etc. Complete.

52. 32. Providing and fixing chicken mesh 30 323.00 Sq.Mtr 454.50

cm wide double folded fixed firmly to

wall with nails on vertical or horizontal

junction of RCC and brick wall before

plastering including scaffolding and all

lead & lift ete complete any floor

53. 33. Providing 20 mm thick Water Proof 105.00 Sq.Mtr 277.47

cement plaster for sunk in single coat on

brick / concrete wall for interior

plastering up to floor two level finished

even and smooth (ii) Cement mortar 1:3

(1-cement ,3- sand) and mixing

waterproofing materials of approved

brand and manufacture in cement

mortar in proportion recommended by

the manufacturer for All Floor.

54. 34. Providing and laying cement concrete 105.00 Sq.Mtr 130.48

1:5:10 (1-Cement:5-finesand:10-graded

brickbat aggregates 40mmnominal size)

and curing complete including

waterproofing material excluding cost

of form work - for toilet floor at all levels

55. 35. Providing & Laying CINDER FILLING in 12.00 Sq.Mtr 1054.44

architectural gap and sunk slab

including compacting manually with

rammer and finishing true line & level at

all floor level etc. complete as directed

56. 36. Providing and laying integrated cement 898.00 Sq.Mtr 956.16

based water proofing treatment of

required thickness over the roof, chaina

mosaic fitting and finally finishing the

surface with white cement slurry and

slopping out terrace slabs with

following specification laid to required

slope not flatter than 1:8 (the thickness

of water proofing treatment near

rainwater outlet or the lowest point of

the finished slope shall not be less then

45mm, including treating the vertical

surface of the parapet wall up to 20cms

. height above finished level of terracing

including finishing the top with joint less

water proofing plaster, curing, testing

etc. complete. (No extra shall be paid for

increase in thickness for proper slope).

(A) Applying and grouting a slurry coat

of neat cement using 2.75 kg/sqm. of

cement admixed with properly water

proofing compound conforming to IS -

2645 incl. cleaning the surface before

treatment (B) Providing and laying

mm thick cement concrete 1:5:10 (1-

Cement:5-finesand:10-graded brickbat

aggregates 40mm nominal size) and

curing complete excluding cost of form

working (C) After Two Days of proper

curing applying a second floor of cement

slurry. (D) Finishing the surface with

china mosaic pieces laid on 10mm thick

joint less cement plaster of mix 1:3(1

cement :3 coarse sand) admixed with

proprietary water proofing compound

conforming to IS :2645 and finally

finishing the surface with trowel with

neat cement slurry (E) The whole

terrace so finished shall be flooded with

water for a minimum period of two

weeks for curing for final taste. All above

operation to be done in order and as

directed and specified by the Engineer

In Charge. (The plan area shall be

measured and paid, vatta shall not be

paid separately)

57. 37. Providing & laying GVT Vitrified tiles 843.00 Sq.Mtr 1767.50

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on

existing flooring by adhesive material

and jointed with color cement slurry

including Making 3mm spacer at joint of

tiles and fill the spacer with epoxy

jointing material ,finished with flush

pointing & cleaning the surface etc

complete selection as directed by

Architect/E.IC ( Min. Size -1.20Mt. X

Mt. or Bigger 8’ x 4’ as selected by EIC)

Make: AGL, Nitco, Kajariya or as

selected by authority.

58. 38. Providing and laying polished Kota 71.00 Sq.Mtr 965.59

stone slab flooring over 20mm

(Average) thick base of cement mortar

1:6 (1-cement : 6-coarse sand) or L.M.

1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement

slurry mixed with pigment to match the

shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

(upto 10 ton). Material should be as per

brand list as selected by authority.

59. 39. Providing and laying polished kota 30.00 Sq.Mtr 1089.67

stone slab 25mm thick in risers of steps,

skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement:

coarse sand) and jointed with gray

cement slury mixed with pigment to

match the shade of slab including

rubbing and polishing etc. complete.

Material should be as per brand list as

selected by authority.

60. 40. Providing and laying Vitrified tiles 88.00 Sq.Mtr 1073.13

(GVT)8 to 10 mm thick , Min. 24'' x 24''

or bigger (i.e. 2’ x 4’ or 8’ x 4’) as selected

by EIC in flooring treads of steps and

landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in

white cement. etc complete selection as

directed by Architect/E.I.C. Make: AGL,

Nitco, Kajariya or as selected by

61. 41. Providing & laying GVT Vitrified tiles in 256.00 Sq.Mtr 1616.00

Toilet flooring, side wall skirting, risers

of steps and DADO on 10mm thick

cement plaster 1: 3 (1 cement: 3 coarse

sands) & jointed with white cement

slurry. and jointed with color cement

slurry including Making 3mm spacer at

joint of tiles and fill the spacer with

epoxy jointing material or spacer Baar,

finished with flush pointing & cleaning

the surface etc complete selection as

directed by Architect/E.IC IC (Min. Size -

1.20Mt. X 0.60 Mt. or Bigger 8’ x 4’ as

selected by EIC) Make: AGL, Nitco,

Kajariya or as selected by authority.

62. 42. Providing & fixing 18 mm thick first 174.00 Sq.Mtr 1954.25

quality Black Polished Granite stone

approved by Client/Architect for Doors

- windows Frame, Lintel, jambs & sill in

cement mortar (1:4) including cutting,

fixing in cement paste with hairline

joint, filling the joints with white cement

/ pigments / joint filler, rounding of

edges, edge polishing & finishing as

directed by the Engineer. (fixing the

granite in one piece). Material should be

as per brand list as selected by

63. 43. P/F 18 mm avg. thick double polished 4.00 Sq.Mtr 2157.74

(both side) jet black granite slab for

urinal partition incl. making groove in

wall and fixing properly in line & level

incl. all cost of materials & labours etc.

complete at all levels.

64. 44. Providing and fixing 35 mm thick Flush 9.00 Sq.Mtr 3019.90

door shutters excl. door frame ( fitted on

granite frame) , including fixing 1 mm

thick exterior lamination over it on both

sides, peripheral 2 x 3 cm mounding

patti with colour, with Stainless Steel

hinges size - 6" x 1.25", dead lock with

key , SS handle size 30 cm Long, SS

Tower Bolt (Stoper) size 20cm long, as

per detail including one coat of primer

and two coats of oil painting as and

where required, pattern and design is to

be approved by the Architect/EIC.

65. 45. PARTLY GLAZED DOUBLE LEAF DOOR 60.00 Sq.Mtr 7373.00

(LAMINATE FINISH):- Providing &

Fixing Partly Glazed Double leaf Door,

of size as per detail drawing (for each

door.) considering block board flush

door sheet of 35 mm thickness covered

both side by 9 mm ply & finished with

mm thick laminate on both sides of

shutters and having 12 mm clear

toughen glass slits as per given pattern

& size with crystal edges in both

shutters, fixed with Burma border Patti

at joints, Finishing with all necessary S.S

hardwires like DOOR S.S Handles 5PHO

2218SS -FPHO 2218, conceal Door lock

Mortise Body 85x60M S.S , DOOR UK key

CYLI,60MM 1CK S.S 5 KEY M/HL

ROSE SS, cylinders, stoppers, tower

bolt, MS nails, SS-304 screws,

miscellaneous hardware items etc. As

per details given in drawing and as per

instructions of Architect/ consultant/

Engineer In charge.

66. 46. Providing and fixing standard extruded 8.00 Sq.Mtr 1525.00

of aluminum section of size 63.50 x

38.10 x 1.95 mm (of Jindal Section

no:4605, @ Wt 1.094Kg / Rmt with

colour anodized aluminum frame with

mm thick transparent bronze colour

tinted float glass with colour anodized

aluminum frame for ventilation with

mm thick frosted glass as details etc

complete (work for all the floors). As per

details given in drawing and as per

instructions of Architect /consultant/

Engineer In charge.

67. 47. Providing and fixing extruded 10.00 Sq.Mtr 2140.33

aluminum window having extruded

aluminum Colour Powder Coated

section frame main outer size 127mm x

horizontal Four track member size

1.205 Kg/mt, vertical member of size

1.398 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm

x 1.29mm @ wt. of 0.456Kg/mt, vertical

member of size 40mm x 18mm x

1.29mm @ wt. of 0.456Kg/mt,@ with

mm thick transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing

to frame as per details etc complete for

window. As per details given in drawing

and as per instructions of Architect

/consultant/ Engineer In charge.

68. 48. Providing and fixing window having 88.00 Sq.Mtr 1591.87

extruded aluminum Colour Powder

Coated section frame main outer size

Kg/mt, horizontal Three track member

size 92mm x 31.75mm x 1.30mm @

Wt.1.07 Kg/mt, vertical member of size

Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm

x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted

float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing

to frame as per details etc. . As per

details given in drawing and as per

instructions of Architect /consultant/

Engineer In charge.

69. 49. Providing and fixing window having 23.00 Sq.Mtr 2020.00

extruded aluminum Colour Powder

Coated section frame including

mosquito net wire mesh shutter with

powder coated aluminum fittings size as

per architectural drawings etc complete

as directed by architect /EIC.

70. 50. Providing & fixing 35 MM thick door 26.00 Sq.Mtr 2152.31

shutter excl. door frame (fitted on

granite frame) consisting of solid core

single or double leaf flush door shutter

of 30 MM thickness, lipped with 15 mm

(5MM x 3) thick x 30 mm width on stiles

& top rails and 10 mm (5 mm x2) other

stiles and bottom rails. The inner panel

laminated with 2 mm thick termite

proof, water proof & fire resistant

mounded PVC sheet with 2,4,6 raised

panel design in different plain and/ or

pre laminated colour on one side after

routing the moulded design on flush

door & 2 MM plain and/ or pre

laminated PVC sheet on other side using

rubber adhesive on flush door and

solvent cement adhesive on the PVC

lapping incl. prov. & fixing stainless steel

matt fixtures, fasteners and lock as per

the detailed drawing etc. complete at all

level (Excl. cost of granite frame). As per

architectural drawings etc complete as

directed by architect /EIC

71. 51. Providing & Fixing 100 mm 107.00 Sq.Mtr 1111.00

vertical/Horizontal blind of NL or

vyoma or equitant make of choice shade

& pattern rate shall be including

necessary NOTCH guard treatment on

both sides, the overlaps shall be uniform

& adequate. As per architectural

drawings etc complete as directed by

72. 52. Providing and fixing eco-friendly light 61.00 Sq.Mtr 1648.96

weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery

for Extra Strength the Light weight

calcium silicate ceiling tiles shall have,

light reflection 85% non-combustible as

per B.S. 476 part IV, 100% humidity

resistance and also having thermal

conductivity0.043° w/m KC. for the best

thermal Insulation. The Light weight

calcium Silicate tile shall be of approved

texture Fine fissured/Spin tone/Cosmos

having NRC value of 0.5 & Globe having

NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true

horizontal level suspended inter locking

metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per

sqm including both side). consisting of

main ‘T’ runner suitably spaced at joints

to get required length and size of

24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm center to

center, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between

main ‘T’ at 600mm center to center to

form a grid of 1200X600mm and

secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm

thick (Minimum) sheet to be interlocked

at middle of the 1200X600mm panel to

form grid of size 600X600mm resting on

periphery walls/partitions on a

perimeter wall angle precoated steel of

size (24X24X3000mm made of 0.40mm

thick (minimum) sheet with the help of

raw plugs at 450mm center to center

with 25mm long dry wall screws @

230mm interval and laying 15mm thick

Densified edges light weight calcium

silicate ceiling tiles of approved texture

(Fine Fissured/Cosmos/Spintone) in

the grid including, cutting /making

opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors

etc., wherever required. Material should

be as per brand list as selected by

authority. As per details given in

drawing and as per instructions of

Architect /consultant/ Engineer In

73. 53. Providing and fixing single layer 437.00 Sq.Mtr 606.95

waterproof Gypsum board moisture

resistant 12.5 mm thick of the make

Newgood Group Co. Ltd. or equivalent &

Newgood Group Co. Ltd. company

sections using waterproof board of size

suspended by G.I suspender of size

mm x 3 mm with intermediate channel

of size 18 mm x 40 mm x 12.5 mm at

1220 mm center to center ceiling

section of size 40 mm x 35 mm x

mm at 457 mm center to center and

perimeter channel A of size 20 mm x

mm x 30 mm x 0.50 mm at edges & drops

including paper tap sand soffit cleat,

anchor fastener, scotch bolt connecting

cleat joining compound top coat on

ceiling including making necessary

opening for light fitting, diffuser etc.

Material should be as per brand list as

selected by authority. As per details

given in drawing and as per instructions

of Architect /consultant/ Engineer In

74. 54. External wall painting (two coats pf 2646.00 Sq.Mtr 134.84

priming coat + two coats of paint) with

APEX exterior paint of Asian paints or

equivalent of required shade or

equivalent including a priming coat of

primer of approved brand and

manufacture on wall & any other

surfaces to give an even shade after

thoroughly brushing the surface &

making the surface free from mortar

droppings and other foreign matter and

sand papered smooth incl. filling the all

small holes, cracks, open joints,

undulations and similar other minor

defects of every kind with ready-made

putty of approved brand and

manufacture and rubbed smooth with

sand paper incl. nece. scaffoldings etc.

complete at all floor levels. Material

should be as per brand list as selected by

authority. As per details given in

drawing and as per instructions of

Architect /consultant/ Engineer In

75. 55. Wall painting with (two coat) plastic 4629.00 Sq.Mtr 120.94

emulsion paint of approved brand and

manufacture on undecorated wall /

Ceiling surfaces to give an even shade

including thoroughly brushing the

surface free from mortar droppings and

other foreign matter and sand papered

smooth including two coat birla putty &

two coat Primer of approved brand.

(work for all the floors). Material should

be as per brand list as selected by

authority. As per details given in

drawing and as per instructions of

Architect /consultant/ Engineer In

76. 56. Applying priming coat over new steel 127.00 Sq.Mtr 122.49

and other metal surface after and

including preparing the surface by

thoroughly cleaning, oil, grease, dirt and

other foreign matter and scoured with

brushes fine steel wood, scrapers and

sand paper with ready mixed priming

paint brushing red lead. Painting two

coats (including 1 Priming coat) on new

steel and other metal surface with

enamel paints brushing, interior to give

an even shade incl. cleaning the surface

of all dirt, dust and other foreign matter.

(work for all the floors)

77. 57. Providing and fixing S.S. (8% nickel, 33.00 Rmt 2901.11

SS304) PIPE RELLING of 0.90m height

as pattern shown in drawings at

STAIRCASE with anchoring 0.075m in

RCC or masonry including 50mm dia. SS

pipe 18 gauge @ 1.40 kg./m as hand rail,

40x40mm SS pipe 18 gauge @

kg./m as vertical support and 16mm dia.

SS pipe 18 gauge @ 0.45 kg./m as

intermediate horizontal member

including welding, grinding, fixing in

position with necessary fixtures and

fastenings (25mm bracket, base SS cap

50mm dia. hole, base SS cap 40x40mm

hole, SS pipe cap 16mm hole & 16mm

long) and polishing etc. completed.

Material should be as per brand list as

selected by authority. As per details

given in drawing and as per instructions

of Architect /consultant/ Engineer In

78. 58. Providing and fixing M.S. grills of 2586.00 Kg. 104.04

required pattern to wooden frames of

windows etc. with M.S. flats at required

spacings and frame alround, square or

round bars with round headed bolts and

nuts or by screws (A) Plain Grill

79. 59. Providing and fixing in position 38.00 Quinta 5785.56

collapsible steel shutters with vertical l

channels 20mm x 10mm x 2mm braced

with flat iron diagonals 20mm x 5mm

size with top & bottom rail soft iron

mm x 40mm x 6mm with 38mm

diameter steel pulleys complete with

bolts, nuts, locking arrangements,

stopper handles including applying a

priming coat of red lead paint. As per

details given in drawing and as per

instructions of Architect /consultant/

Engineer In charge.

80. 60. LOUVERS: Supplying and Installation of 139.00 Sq.Mtr 4545.00

Aluminum powder coated louvers etc

complete as per drawing& selection as

directed by Architect/Engineer in

81. 61. Providing a I.S.I mark 7 levers three keys 2.00 Each 213.98

brass pad lock of NAVTAL (Goderej)

make 75mm dia on completion of

82. 62. Constructing of Cooking platform 14.00 Sq.Mtr 2954.56

(sandwich type) 80cm high resting on

thick sandwiched polish kota stone in

C.M 1:3 with providing and fixing 25 mm

thick rough kota stone at bottom and

25mm thick Polish kota stone/ Granite

stone (single piece) top and polished

kota stone/ granite stone (single piece)

25mm thick on top with 15mm high

machine cut polished kota stone

/granite round moulded facia patty

including polishing etc . complete as per

drawing and specification without

stainless steel sink including necessary

cutting for sink & making hole for gas

pipe and fixing P.V.C bend of 25mm dia.

83. 63. Providing and fixing 5 mm thick PVC 20.00 Nos. 505.00

sheets as signage and display of health

signs/information of required size

having retro reflective letters/design as

per requirement, fixing the same

through approved adhesive etc.

complete work shall be carried out as

per instruction of Engineer-in-charge

(Approved make PVC foamed sheet

only) (25 x 6 cms.)

84. 64. Providing & Fixing Engraved letters, 1.00 Sq.Mtr 20200.00

figures, logo etc. on 1 mm thick S. S.

grade plate (inching plate) and fix on

any surface, wall and at any height.

Plates will be fix with Brass Pins and

nuts in proper line & level. (stops,

comas, hyphens and the like not to be

measured and not paid for separately

(ii) Indian letters-

85. 65. Providing and fixing pre-cast Rubber 318.00 Sq.Mtr 686.90

Dye / steel Dye inter locking concrete

block 60mm thick with grade of

concrete M300 pneumatic compressed /

vibrated mechanically and as per

approved design Confirming to IS

: 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in

proper line and level as per guidelines of

IRC : SP 63-2018 etc. Complete. As per

details given in drawing and as per

instructions of Architect /consultant/

Engineer In charge.

86. 66. Providing and fixing pre-cast concrete 155.00 Rmt 361.84

kerb stone of gray cement based

concrete block 30cm length,30cm height

and 15cm thick of M250 grade concrete

as per approved design and including

excavation for fixing in proper line and

level, filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

87. 67. Providing and fixing in expansion joint 2.00 Sq.Mtr 2982.06

100 mm thick expansion joint board of

best quality and approved make

including cutting to required size and

shape at all levels etc. complete as

88. 68. Box cutting the road surface to proper 144.00 Cu.Mt 104.04

slope and camber for making a base for

road work including removing the

excavated stuff and depositing on the

road side slope as directed up to

89. 69. Construction of granular sub-base by 216.00 Cu.Mt 1888.52

providing & laying of compacted

thickness of 200 mm Grading 5th

Granular sub base (GSB) in layers of

(150 mm with geocell + 50 mm) of

graded granular material consisting of

machine cut black trap stone aggregate

as per grading - V given in table 400-1 of

the specification MORT&H and

compactor to the required density with

vibratory roller in all seasons as per

MORT&H , maintaining the required

slope & grade during the operation as

approved by the engineer in charge &

watering to the proper moisture content

and sprinkled with the help of truck

mounted water tank fitted with suitable

arrangement. (fully saturated having

CBR value minimum 30)

90. 70. Providing, laying, spreading and 144.00 Cu.Mt 2174.33

compacting graded stone aggregate to

wet mix macadam specification

including premixing the materials with

water at OMC in mechanical mix plant

carriage of mixed materials by tipper to

site, laying in uniform layers (Layer

should not be more than 200 mm)with

paver in sub base/base course on well-

prepared surface and camber with

Sensor paver consolidation by vibratory

road roller to achieve the desired

density by using machine crushed chips

as per required gradation mixing with

required optimum quantity of water

incl material, labour, plant and

machinery and equipment etc. complete

by plant mix method. (Using mechanical

91. 71. Construction of dry lean cement 144.00 Cu.Mt 3476.64

concrete Sub- base over a prepared sub-

grade with coarse and fine aggregate

conforming to IS: 383, the size of coarse

aggregate not exceeding 25 mm,

aggregate cement ratio not to exceed

15:1, aggregate gradation after blending

to be as per table 600-1, cement content

not to be less than 150 kg/ cum,

optimum moisture content to be

determined during trial length

construction, concrete strength not to

be less than 10 Mpa at 7 days, mixed in a

batching plant, transported to site, laid

with a paver with electronic sensor,

compacting with 8-10 tonnes vibratory

roller, finishing and curing.

92. 72. Construction of un-reinforced, dowel 287.00 Cu.Mt 8055.61

jointed, plain cement concrete

pavement over a prepared sub base with

approve grade cement @ 400 kg per

cum, coarse and fine aggregate

conforming to IS 383, maximum size of

coarse aggregate not exceeding 25 mm,

mixed in a batching and mixing plant as

per approved mix design, transported to

site, laid with a fixed form or slip form

paver, spread, compacted and finished

in a continuous operation including

provision of contraction, expansion,

construction and longitudinal joints,

joint filler, separation membrane,

sealant primer, joint sealant, debonding

strip, dowel bar, tie rod, admixtures as

approved, curing compound, finishing to

lines and grades as per drawing.

93. 73. LAMINATE FINISH TABLE: Providing & 4.00 Sq.Mtr 17170.00

fixing laminate finish table having given

size with height of 750 mm (as per

attached detail drawing) Table having

40 mm Thick .at top made by 19 mm

thick sandwich ply. Top is cantilever

then its base supports. Base supports

made by 19 mm thick sandwich ply. A

Table having drawers and a shutter in a

pedestal and a key board trey at single

end. Drawers & Keyboard trey rest on

telescopic channels. Shutters & drawers

having thickness of 25 mm which are

made by 19 mm + 6 mm ply to create

conceal grooves as handle. Drawers &

keyboard, sides, Bottom is covered with

19 mm ply & back of pedestal are made

up of 12 mm thick Marin Ply Wood.

Having 3" high Footrest of 19 mm ply.

At Front facade (covered with grooves

as per given patterns.

All internal and external surfaces

covered by 1mm thick laminate. all

complete with given nos of key board

trey, drawers on telescopic channels,

locks, stoppers, SS Screws, MS nails,

Auto hinges, Cable Manager etc as per

shown in detail drawings & as per

instructions of architect/consultant / in

charge engineer. Contractor has to

provide all necessary cut outs for

Electrical works & no extra payment

shall be made for it. Material should be

as per brand list as selected by

authority. As per details given in

drawing and as per instructions of

Architect /consultant/ Engineer In

94. 74. CORIAN TOP VINEER FINISH 8.00 Sq.Mtr 20200.00

CONFERENCE TABLE : Providing &

fixing corian top veneer finish

conference table 750 mm height , see

size as per detail drawing ,Corean Top

based on 19 mm thick Marin plywood

finished by rubbing ,buffing & pasting

(Core an top covers 300 mm bottom of

table at longitunal side & 300 mm

bottom of table at shorter side including

edges) table have base of 19 mm thick

plywood for footrest & supporting

vertical supports made by of 12mm+9

mm thick sandwiched Ply for grooving

as indicated in drawing. (as per details

given in sectional drawing) Base of the

table covered by Burma teak bidding

Patti finished with veneer. All external

& internal surfaces covered by 4mm

thick veneer, complete with PU spray

polish All complete as per shown in

detail drawings & as per instructions of

architect / in charge engineer.

Contractor has to provide all necessary

cut outs for Electrical works & no extra

payment shall be made for it. Material

should be as per brand list as selected by

authority. As per details given in

drawing and as per instructions of

Architect /consultant/ Engineer In

95. 75. DINNING TABLE: - Providing & fixing 4.00 Sq.Mtr 20200.00

DINNING TABLE, having size as per

detail drawing, granite top surface with

proper finished, polished all side

moulding, chamfering & teakwood

frame, support with 12mm ply inside

with polishing, necessary hardware etc

All complete as per shown in detail

drawings, photos or selected by

authority. & Material should be as per

brand list as selected by authority.

96. 76. Providing & fixing plywood frame of 30.00 Sq.Mtr 1668.91

150mm x 38mm thick, fitting & fixing as

per drawing 1.0 mm laminate of

approved colour & shade as approved

97. 77. Providing & fitting toughed 12 mm clear 14.00 Sq.Mtr 1086.18

float glass of modi or equlent makes as

per approved design shall be provide

from f.f. up to 2.4 mt height fixed with

wooden molding on both sides finished

with melamine polish/glass film as

approved by EIC.

98. 78. Providing & fitting toughed 12 mm clear 7.00 Sq.Mtr 2780.71

float fully glass Door of modi or equilent

makes with floor spring heavy duty,

cm long handle both side, locks and

other necessary fittings as per approved

design shall be provide from f.f. up to

mt height fixed with wooden molding on

both sides finished with melamine

polish/glass film as approved by EIC.

99. 79. FABRIC FINISH VISITOR CHAIR - 14.00 Nos. 7575.00

Providing & Supplying of Fabric finish

visitor Chairs, having single touch

adjustable seat of appropriate size,

Frame construction should be of nylon &

black in color having dimension of

1200mm Ht., 475mm width & 431 mm

Depth & Back cushion Ht. should be

mm. It should have Nylon base Arms;

Armrest is T fixed. having ht. of 260mm,

It should have minimum 5 years

warranty. Complete as per instructions

given by the Architect & Engineer In

charge & as per shown in the View.

Samples should be approved by the

Architect & Engineer In charge. Please

see the Attached Make List for Approved

Makes Make: Hoff - Model No. Eone, or

wipro, Godrej. MEDIUM BACK WITH

FABRIC FINISH VISITOR CHAIR WITH

FIBER LEG REVOLVING.

100. 80. HIGH BACK WITH COMPOSITE LATHER 2.00 Nos. 15150.00

CHAIR - Providing & Supplying of High

Back Chairs, having single touch

adjustable seat of size 525mm x 500mm,

having adjustable tilt angle & tension

with lock to find optional position, water

fall seat cushion slopes slightly

downward to help reduce stress on your

legs. Frame construction should be of

aluminum & black in color having

dimension of 1200mm Ht., 700mm

width & 750 mm Depth & Back cushion

Ht. should be 719 mm. It should have

Nylon base Arms, Armrest is 2D. it

should have provision of Gas Lift system,

WITH CROME LEG AND FANCY ARM

REST WARRANTY 1 YEAR Complete as

per instructions given by the Architect &

Engineer In charge & as per shown in the

View. Shape, design, material, colour,

etc. will be selected by

Architect/Engineer In charge. Make:

Hoff - Model No. Spon (H), or Wipro,

Godrej. WITH CROME LEG AND FANCY

ARM REST WARRANTY 1 YEAR

101 81. WOODEN DINNING CHAIR: - Providing 10.00 Nos. 7070.00

& supplying Wooden chair, having solid

teak wood chair etc All complete as per

shown in drawings, photos & as per

instructions of architect / engineer in

102 82. 2-SEATER SOFA: The Inside frame shall 4.00 Nos. 25250.00

be made of seasoned wood with proper

anti-termite treatment. The seat and

back shall be made of foam and finished

in leatherite upholstery. leatherite

colour and type shall be as per approval.

The seat and back shall be made of PU

foam of density 45 ± 2 Kg/m3 . hardness

- 20 ±2 on Hampden machine at 25%

compression with wood inserts for

ensuring long life and optimum comfort

to the users. The complete seat and back

cushion shall be upholstered with satin

repellant “Velveteen fabric”. Under

structure proved S.S. frames made from

50mm x 25mm S.S. with stander Buffing.

All complete as per shown in drawings,

photos & as per instructions of architect

/ engineer in charge.

103 83. LAMINATE FINISH SIDE CREDENZA UP 5.00 Sq.Mtr 16160.00

to 0.75MT HT: Providing & fixing

Laminate Finish Low ht back credenza

having Ht of 750mm. having 18 mm

quartz stone top with ply. base, based on

vertical supports made by 19mm Thick.

comm Ply Wood with all shutters &

horizontal single self (made by 19 mm

thick Marin ply) as per given in detail

drawings. Backside of low ht storage is

covered with 12 mm thick plywood.

Shutters made with 19mm ply with

wooden handles. Credenza have

suggested nos of drawers of suggested

ht and suggested self & shutters. All

exposed and internal Joints complete

with teak wood bidding patti finished

with melamine polish. All exposed and

internal surfaces covered with 1 mm

thick approved shade laminates as

instructed by Architect/ consultant/

Engineer in charge. Sizes and patterns

may be varies as suggested by architect.

All fixtures and fastening must be

approved by architect/EOI as per given

standard make. Complete with all all-

necessary mouldings, hardware like MS

nails, ss-304 screws, magnet, Stoppers, L

- hinges, 19 mm multilocks, table chain,

conceal handles etc.

104 84. Providing and fixing in position cowel 2.00 Nos. 389.74

went to pipes. 75mm dia.

105 85. Providing and fixing in position cowel 12.00 Nos. 501.87

went to pipes. 100mm dia

106 86. Providing and fixing Gun metal check or 2.00 Nos. 186.83

non-return fullway wheel valve.

107 87. Providing and fixing Gun metal check or 3.00 Nos. 420.63

non-return fullway wheel valve.

108 88. Providing and fixing Gun metal check or 5.00 Nos. 314.73

non-return fullway wheel valve.

109 89. Providing and fixing Gun metal check or 3.00 Nos. 663.43

non-return fullway wheel valve.

110 90. Providing and fixing ball cock of 1.00 Nos. 137.89

approved. quality as directed.

(B) Abonite (ii) 50mm dia.

111 91. Providing laying and jointing in true line 245.00 Rmt 72.65

and level 15mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings as

approved by Engineer in Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two-meter C/C or shall

be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials. Material should be as per

brand list as selected by authority.

112 92. Providing laying and jointing in true line 120.00 Rmt 91.84

and level 25mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings as

approved by Engineer in Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two-meter C/C or shall

be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials. Material should be as per

brand list as selected by authority.

113 93. Providing laying and jointing in true line 150.00 Rmt 119.15

and level 32mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings as

approved by Engineer in Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two-meter C/C or shall

be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials. Material should be as per

brand list as selected by authority.

114 94. Providing laying and jointing in true line 100.00 Rmt 148.12

and level 40mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings as

approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two-meter C/C or shall

be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials. Material should be as per

brand list as selected by authority.

115 95. Providing laying and jointing in true line 140.00 Rmt 195.67

and level 50mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings as

approved by Engineer in Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two-meter C/C or shall

be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

all materials. Material should be as per

brand list as selected by authority.

116 96. Providing, laying and jointing in true 275.00 Rmt 836.73

line and level 110 diameter U.P.V.C

(Type B) conforming to IS 13592-1992

with one end plain and other end

socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of

approved make for drainage system

pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall

be fixed on wall using of PVC clamp of

the size 110 mm diameter x 149 mm

length x 145 mm heigh at every

mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes

etc. including testing of pipes and joints

and jointed with adhesive solvent

cement including cost of all materials.

Material should be as per brand list as

selected by authority.

117 97. Providing and fixing PVC SWR Nahni 3.00 Nos. 571.08

trap IS 14735 for drain - 100 mm

diameter with jali of the following

nominal diameter of self-cleansing

design with C.I scread down or hinged

grating including the cost of cutting and

making good the walls.

118 98. Providing erecting and fixing double 5000.00 Liter 3.95

coated ISI water tank of required

capacity each with all necessary fittings

and connection etc. complete on terrace.

Material should be as per brand list as

selected by authority.

119 99. Providing and fixing concealed center 35.00 Rmt 166.86

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water

of following dia. nominal bore tube

fittings and clamps including making

good the wall, ceiling and floor etc.

complete. [A] 15 mm. Material should be

as per brand list as selected by

120 100. Providing and fixing S.W. gully trap with 5.00 Nos. 1292.19

C.I. grating brick masonry chamber and

water tight C.I. cover with

frame of 300mm x 300mm size (inside)

with standard weight. (i) Square mouth

traps. (A) 100mm x 100mm size P type.

121 101. Providing laying (to level or slopes) and 210.00 Rmt 248.67

jointing reinforced concrete Light duty

non-pressure pipes I.S. class NP2 of the

following internal diameter with collars

and butt ends prepared for collar joints

including testing of joints complete.

122 102. Providing laying (to level or slopes) and 10.00 Rmt 348.04

jointing reinforced concrete Light duty

non-pressure pipes I.S. class NP2 of the

following internal diameter with collars

and butt ends prepared for collar joints

including testing of joints

123 103. Constructing Manhole with R.C.C. top 2.00 Nos. 19330.46

slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6

mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-

Cement : 3-coarse sand) finished with a

floating coat of neat cement and making

channels in cement concrete 1:2:4 mix

(1-Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished

smooth complete including curing and

festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with

frame size 560mm diameter total

weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm

thick walls of brick masonry using brick

having crushing strength not less than

35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2) B type depth

1.50 Meter for 150mm diameter sewer.

124 104. (II) Extra rate for constructing B.B. 1.00 Nos. 397.19

masonry for every additional depth of

0.1M. GR Part thereof over item

No.24.27 (I) for depth from 1.50M. to

125 105. Providing and fixing cast iron steps of 35.00 Nos. 203.76

size 500mm x 150mm x 22.5mm and

painting with two coats of Anti-

corrosive paint etc. complete.

126 106. Constructing brick masonry chamber 5.00 Nos. 2932.93

for underground C.I. Inspection

chamber and bends with bricks having

crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm

internal dimensions total weight of

cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slab with 1:2:4

mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished

smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete. (i) Inside dimensions

455mmx 610mm and 450mm deep for

single pipe line.

127 107. Extra over items 24.44 for every 2.00 Nos. 242.39

additional depth of 0.1M. of part thereof

beyond 450mm depth for Brick

masonry chamber. (i) for 455mm x

128 108. Constructing brick masonry chamber 9.00 Nos. 3660.76

for underground C.I. Inspection

chamber and bends with bricks having

crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm

internal dimensions total weight of

cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slab with 1:2:4

mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished

smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete. (ii) Inside dimensions 500mm

x 700 mm and 450mm deep for pipe line

with one or two inlets.

129 109. Extra over items 24.44 for every 6.00 Nos. 264.86

additional depth of 0.1M. of part thereof

beyond 450mm depth for Brick

masonry chamber. (ii) for 500mm x

130 110. Constructing brick masonry chamber 6.00 Nos. 7180.44

for underground C.I. Inspection

chamber and bends with bricks having

crushing strength not less than 35Kg/

Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm internal

dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slab with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone

aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished

smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete. (iii) Inside dimensions

600mm x 850 mm and 450mm deep for

pipe lines with three or more inlets.

131 111. Extra over items 24.44 for every 4.00 Nos. 325.59

additional depth of 0.1M. of part thereof

beyond 450mm depth for Brick

masonry chamber. (iii) for 600mm x

132 112. Providing laying and jointing U PVC 35.00 Rmt 89.89

SCH40 for cold water 20 mm dia (3/4)"

including its accessories.

133 113. Providing laying and jointing PVC SWR 5.00 Rmt 386.83

pipes IS 13592 for Drain - 75 mm dia it's

134 114. Providing and fixing PVC SWR P- Trap IS 25.00 Nos. 357.54

14735 for Drain -110x110 it's

135 115. Providing and fixing Gun metal check or 8.00 Nos. 871.63

non-return full way wheel valve. (A)

136 116. Providing laying and jointing PVC SWR 65.00 Rmt 337.34

pipes IS 13592 for Drain - 50 mm dia it's

137 117. Providing and fixing to the inlet mouth 6.00 Nos. 520.15

of rain water pipe cast iron grating

cm diameter and weighing not less than

138 118. Providing and fixing wash down water 7.00 Nos. 8888.00

closet European type WC pan (Wall

Hung) of Jaquar or Kohler or American

standard like JAQUAR CNS-WHT-

961SPP- SIZE 365x545x360MM and P

trap distance 23.5 cms with integral P

trap including jointing the trap with soil

pipe in cement mortar 1:1 (1 cement:

find sand) etc, complete. Make: Jaquar,

Kohler or American standards only

as selected by authority.

139 119. Providing and fixing Health Faucet hand 7.00 Nos. 1919.00

shower of Jaquar or Kohler or American

standard heavy duty with SS braided

hose 1.2 MT long pipe to water closet

like JAQUAR ALD-CHR-573. Make:

Jaquar, Kohler or American

standards only as selected by

140 120. Providing and fixing Metropole Flush 7.00 Nos. 4040.00

Valve of Jaquar or Kohler or American

standard Regular 32mm Size

(Concealed Body) with Exposed Shut Off

Provision & Round Flange like FLV-CHR-

1095N. Make: Jaquar, Kohler or

American standards only as selected

141 121. Providing and fixing Toilet roll holder - 7.00 Nos. 909.00

like Jaquar -ACN -1151N etc, complete.

Make: Jaquar, Kohler or American

standards only as selected by

142 122. Providing and fixing Urinal of Jaquar or 6.00 Nos. 7878.00

Kohler or American standard approved

quality including connection with trap

and with integral longitudinal flush

pipe. (A) Squatting plate pattern white

earthenware size of urinal

385x325x635 mm like jaquar make

code no URS-WHT-13253N including

(1) Providing and fixing SS finish waste

coupling of 32 mm dia size half thread

with 80mm height like jauar -ALD -

for wash basin with rubber plug etc

completed. Make: Jaquar, Kohler or

American standards only as selected

143 123. Providing and fixing of Jaquar or Kohler 6.00 Nos. 3383.50

or American standard SS finish flush

valve of auto closing system like jaquar

PRS-073 of approved quality and

connection with waste pipe trap etc.

completed. Make: Jaquar, Kohler or

American standards only as selected

144 124. Providing and fixing of Jaquar or Kohler 18.00 Nos. 2415.92

or American standard SS finish bottle

trap with internal partition of 32mm

size with 250mm &190mm long wall

flange connection pipes and wall flange

like jaquar ALD-769 of approved quality

with necessary fitting for wash basin etc.

completed. Make: Jaquar, Kohler or

American standards only as selected

145 125. Providing and fixing of Jaquar or Kohler 12.00 Nos. 3989.50

or American standard Wash Basin

vitreous China table top wash basin size

560mm x 450 mm in white colour. Like

JAQUAR CNS-WHT-903 SIZE OF

425x340x175MM with single hole for

pillar tape with CP or MS brackets

painted white including cutting holes

and making good the same including (1)

Providing and fixing of Jaquar or Kohler

or American standard SS waste coupling

of 32 mm dia size half thread with

80mm height like jaquar -ALD - CHR-

705 for wash basin with rubber plug etc.

completed. Make: Jaquar, Kohler or

American standards only as selected

146 126. Providing and fixing on platform 1.00 Nos. 6110.50

stainless steel Sink glossy ASIS

grade x 1mm thick with overall size

610x460mm & bowl size

560x410x200mm including fixing the

sink in platform & making good the

same including the cost of PVC waste

pipe of 32mm dia. and PVC waste

coupling etc complete as directed by EIC

147 127. Providing and fixing of Jaquar or Kohler 13.00 Nos. 3030.00

or American standard SS Pillar cock with

extension body like JAQUAR FUS-CHR-

29021N etc complete as directed by EIC.

Make: Jaquar, Kohler or American

standards only as selected by

148 128. Providing and fixing of Jaquar or Kohler 7.00 Nos. 2727.00

or American standard Two-way BIB

cock with wall flange of genuine

company brand, in with model no like

FUS-CHR29041, water tap brand or

approved ISI brand quality, fixing in

pipeline and testing the same… etc.,

complete., as directed by EIC. Make:

Jaquar, Kohler or American

standards only as selected by

149 129. Providing and fixing of Jaquar or Kohler 8.00 Nos. 1515.00

or American standard SS finish Angular

Stop cock for wash basin like Jaquar

FUS-29053. Make: Jaquar, Kohler or

American standards only as selected

150 130. Providing and fixing of Jaquar or Kohler 4.00 Nos. 2121.00

or American standard SS finish bib tap

like Jaquar Florentine Bib Cock (Silver)

FUS-CHR-29037. Make: Jaquar, Kohler

or American standards only as

selected by authority.

151 131. Providing and fixing of Jaquar or Kohler 5.00 Nos. 17170.00

or American standard Overhead Shower

ø105mm Round Shape Single Flow with

Air Effect (ABS Body & Face Plate

Chrome Plated) with Rubit Cleaning

System like JAQUAR OHS-1709 &

Shower Arm Casted 160mm Long Light

Body Round Shape for Wall Mounted

Showers with Flange like JAQUAR SHA-

477 & Wall Mixer 3-in-1 System with

Provision for both Hand Shower and

Overhead Shower Complete with

115mm Long Bend Pipe, Connecting

Legs & Wall Flange (without Hand &

Overhead Shower) like JAQUAR QQP-

7281PM, Towel Rack 600mm Long

without Hangers, Stainless Steel like

JAQUAR ACN-1181FS approved ISI

brand quality, fixing in pipeline and

testing the same etc., complete., as

directed by EIC. Make: Jaquar, Kohler

or American standards only as

selected by authority.

152 132. Providing, supplying and fixing Waste 6.00 Nos. 303.00

153 133. Providing, supplying and fixing cement 590.00 Nos. 126.25

Bluster as approved by EIC.

154 134. Providing, supplying and fixing GRC 43.00 Sq.Mtr 3131.00

CIVIL WORK: TOTAL PART-A

ELECTRICAL PART

155 135. Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in

below type of pipe erected with 6A

Modular type switch / bell push &

accessories and earth continuity of

following type, erected on PVC /

Metallic/Wooden box, single mounting 125 Pt. 449.45

base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete cat III

156 136. Point wiring for Tissino / Modular

secondary light point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both

are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires,

in below type of pipe to be erected

complete with earth continuity and

necessary connection with primary 92 Pt. 151.50

light with accessories erected on

Metal / PVC / wooden box covered

with 3 mm thick PC(Polycarbonate)

/ Acrylic sheet for open / concealed

wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length,

excess will be considered as Mains for

Secondary Point.

(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete cat III

157 137. Point wiring for FAN with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires

up to 10 mtr length, in below type of

pipe erected with 6A Modular type

switch and hum free EME step type

electronic fan regulator mounted and

accessories with earth continuity of

following type erected on PVC / 31 Pt. 629.23

Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling

as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete cat III

158 138. Point wiring for Individual Plug with &

earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up

to 10 mtr length, in below type of pipe

erected complete with Modular type

switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with

appropriate front plate modules erected 7 Pt. 697.91

on / in wall / ceiling as per pipe erected

with following type of accessories [II]

For 16A Plug and 16 amp switch with

2-2.5 sq.mm Cu. Wire from mcb db

(f) with medium class Rigid PVC pipe

and accessories erected concealed in

wall/ceiling complete cat III

159 139. Point wiring for Individual Plug with &

1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up

to 10 mtr length, in below type of

pipe erected complete with Modular 36 Pt. 473.69

type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered

with appropriate front plate

modules erected on / in wall / ceiling as

per pipe erected with following type of

accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (f)

with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

160 140. Point wiring for on board Looped Plug

with 6A Modular type switch & 5 pin

socket erected on PVC /

Metallic/Wooden box, single mounting 48 Pt. 241.39

base frame covered with textured /

metallic/white front plate modules

erected on / in wall / ceiling with

following type accessories Cat. III

161 141. Providing & erecting Switch board for

Computer or electric apparatus

consisting of following modular type

accessories mounted with PVC /

Metallic concealed/open box with

single mounting base frame covered 3 Ea 1081.71

with textured/metallic /white front

plate, modules erected with necessary

connections as directed1 no. 6A/16A

universal plug-switch combined. 3 nos.

6A Switch3 nos. 6A 5 pin Plug For

Modular Type Accessories Cat. III

162 142. Providing following type of

Modular Type Accessories mounted

with PVC / metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate, 3 Ea 153.52

modules erected with necessary

connections as per site situation

directed by Engineer In charge.

(8) Computer RJ-45 socket Cat.III

163 143. Supplying & erecting approved make

LAN cable of following size in existing 250 Mtr. 45.45

pipe as per direction [C] CAT -

164 144. Providing following type of

Modular Type Accessories mounted

with PVC / metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate, 4 Ea 153.52

modules erected with necessary

connections as per site situation

directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III

165 145. Supplying & erecting approved make

Telephone Cable electrolytic copper

conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape 300 Mtr. 19.19

& sheathed with FRLS PVC or HFFR

outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in

existing pipe. of following size of

conductors & nos.of pairs. With

necessary connections.

[A] Conductor Size 0.5 mm

166 146. Providing & erecting main Distribution

(MDF) indoor type, back mounted

frame as per DoT standard approved 1 Ea. 949.40

with krone strips

(a) Suitable for 10 pair

167 147. Providing following type of

Modular Type Accessories mounted

with PVC / metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate, 1 Ea 153.52

modules erected with necessary

connections as per site situation

directed by Engineer In charge.

(4) TV Co-axial Socket outlet Cat.III

168 148. Providing & Erecting approved make

following size of TV Co-axial flexible

cable comprising inner conductor of

solid bare copper insulated with Foam

PE & Secondary conductor made of 150 Mtr. 37.37

poly - Aluminum film bonded Al.

Braids @ suitable coverage overall

sheathed with black PVC

169 149. providing and erecting Mains with

ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper

conductor with heat resistant PVC

insulated conforms to IS 694, IEC -

227 erected in existing pipe of 10 Mtr. 87.87

following size (Specifically for control

panel, relays, power switchgears, motor

starters & control wiring) with

required size of copper lugs, nuts and

bolts if required.

(f) One wire 10.00 sq. mm

170 150. providing and erecting Mains with

ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper

conductor with heat resistant PVC

insulated conforms to IS 694, IEC -

227 erected in existing pipe of 10 Mtr. 135.34

following size (Specifically for control

panel, relays, power switchgears, motor

starters & control wiring) with

required size of copper lugs, nuts and

bolts if required.

(g) One wire 16.00 sq. mm

171 151. providing and erecting Mains with

ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper

conductor with heat resistant PVC

insulated conforms to IS 694, IEC -

227 erected in existing pipe of 10 Mtr. 225.23

following size (Specifically for control

panel, relays, power switchgears, motor

starters & control wiring) with

required size of copper lugs, nuts and

bolts if required.(h) One wire 25.00 sq.

172 152. providing and erecting Mains with

ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper

conductor with heat resistant PVC

insulated conforms to IS 694, IEC -

227 erected in existing pipe of 10 Mtr. 286.84

following size (Specifically for control

panel, relays, power switchgears, motor

starters & control wiring) with

required size of copper lugs, nuts and

bolts if required.

(i) One wire 35.00 sq. mm

173 153. Providing and erecting Mains with

KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in

following type of pipe to be erected

concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS 610 Mtr. 59.59

PVC insulated stranded wire of green

colour for earth continuity of

following size.

(A) With medium class Rigid PVC

pipe and accessories

(a) 2 wire 1.5 sq. mm

174 154. Providing and erecting Mains with

KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in

following type of pipe to be erected

concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS Mtr. 78.78

PVC insulated stranded wire of green

colour for earth continuity of following

size. (A) With medium class Rigid

PVC pipe and accessories (b) 2 wire

175 155. providing and erecting Mains with

KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in

following type of pipe to be erected in / 430 Mtr. 405.01

on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity

of following size

(A) with medium class Rigid PVC pipe

and accessories

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm)

176 156. Providing and erecting ISI mark

medium class RIGID PVC PIPES of

following size complete to be erected

on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes 350 Mtr. 32.32

fixed with adhesive solution & Clamps

with following dia of pipes, in

approved manner as directed

177 157. Providing & erecting PVC Corrugated

Flexible Conduit with required nos.

of coupling, PVC bushes, Check-nuts 50 Mtr. 20.20

etc. complete of following

sizes. (2) 25 mm

178 158. Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs 1 Ea 2913.85

should be used of same company of

MCB to be used) suitable for

(B) three phase incoming and single

phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door

179 159. Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs 1 Ea 3412.79

should be used of same company of

MCB to be used)

suitable for (B) three phase incoming

and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

180 160. providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and 30 Ea 112.11

having breaking capacity 10 KA to be

erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

181 161. Providing & erecting 240 V MCB double

pole switch for lighting Load (B Curve)

having 10 KA breaking capacity & 3 Ea. 278.76

confirms to IS: 8828 in existing box

having following capacity

(A) 6 to 32 Amp. Cat-III

182 162. Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & 2 Ea. 668.62

confirms to IS :8828 in existing box

having following capacity (b)40 Amp.

183 163. providing and erecting Approved make

RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and

suitable for operation on single phase

240 V,50Hz. having characteristic of 6 Ea 2235.13

quick action & tripping with all advance

feature & do not incorporate any

electronic component. for following

Max. rating erected as directed

(ii) 40Amps. DP Cat. III

184 164. Supplying & erecting approved make

Four Pole 415V change over switch

interior for panel mounting with 1 Ea 4785.38

operating mechanism A.C.23 duty

confirming to IS for

185 165. Supplying and erecting triple pole &

neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of

electrolyte bus having current density

not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly

wrapped with colour insulating tape for 2 1961.42

phase sequence of following current r

carrying capacity, erected with

necessary bus bar supports

/insulators, main cable socket to each

bar, erected in existing cubical panel

with necessary connections.

(A) Suitable for 100 Amp. Capacity

186 166. Providing and erecting Approved make

Four pole moulded case circuit

breaker having breaking capacity ICU

of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with 5 Ea 6172.11

Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S. housing.

187 167. Providing & erecting weather proof,

dust & vermin proof, floor mounted

front operated indoor type cubical

panel board necessary IP- 42 and above

protection as per approval from

engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S. sheet

for internal partitions with

necessary accessories , supporting

angles/ flats channel including

cutting, bending, drilling, welding,

riveting with internal partitions &

cable alley as per requirements &

instruction of engineer-in- charge

with erection of supplied switch gears,

BUSBARS, suitable size of inter

connecting PVC copper wire / copper-

aluminum strips, rubber grommets, rib,

Bakelite control fuses/MCB for

measuring instruments, earth bus & 3 Sq.Mtr 14902.55

earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged

doors, handles with locking

arrangement and rubber gasket, heavy

duty end terminal connection,

danger notice board, necessary

ventilation, earthing strip complete.

The Panel shall be painted with

epoxy powder coating (The rates

exclude the cost of switchgears, bus

bars, inter connecting mains & Copper

Aluminum strips, meters, Fuses etc.

The dimension shall be measured

excluding base beams) The panel shall

be supplied with following approved

manufacturers with following size. (B)

The standard companies switch gear

shall be used and only manufacturers

at CPRI approved factory. (i) with

350mm depth board

188 168. Providing , erecting , fabricating the

M.S. structure as per requirement

on site incorporating proper size

of M.S. angles, square, round, flats,

bars, channels, sections complete

with cutting, welding, grinding & 20 Kg. 77.77

finishing duly painted with one coat

of red oxide with erection on site

as per direction of engineer in charge

with necessary grouting, cementing,

plastering & finishing complete.

189 169. Providing and erecting multifunctional 1 Ea 14123.84

meter suitable for application of Power

monitoring and showing measurement

of following Voltage, Frequency,

Apparent energy, Apparent power,

Active and reactive energy, Active and

reactive power, Average voltage Vavg,

Peak demand power PM, QM, SM,

Demand power P, Q, S, Apparent power

S, S1, S2, S3, Unbalance current, Power

factor and displacement PF (signed, four

quadrant), Calculated neutral current,

Active, reactive, apparent energy

(signed, four quadrant), Active power P,

P1, P2, P3, Voltage U21, U32, U13, V1,

V2, V3, Phase currents, Average current

Iag, Peak demand currents, Reactive

power Q, Q1, Q2, Q3, Demand current I1,

I2, I3, [Us] rated supply voltage 40...300

V AC 45...65 Hz, 40...300 V DC, Network

frequency 50 Hz, Type of network 3P,

Display type 7 segments LED, Display

colour Red, Messages display capacity

fields of 4 characters, Display digits

digit(s) - 14.2 mm in height

190 170. Supplying and erecting approved make

suitable panel indicator LED type 6 Ea 43.43

lamp, lens cover, complete erected with

necessary connections.

191 171. Providing & erecting L.T. Current

Transformer with bar primary 50/5 to

1000/5 ratio 15 VA burden erected in 1 Ea 274.72

existing CRCA box duly secured with

insulating materials connected to the

192 172. Supplying and erecting, commissioning

and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514

having continuous rating, 3 phase,

volts, 50 cycles A.C. supply comprising

of a totally enclosed air/water cooled

diesel engine with multi-cylinders

developing suitable BHP not less than

following capacity at 1500 RPM with

10% overload for one hour in 24 hours

with standard accessories like fly wheel, 1 Ea 410678.12

lubricating oil cooler, "A" class governor,

heavy duty fuel wheel and lubricating oil

filter, oil bath air filler, lubricating oil

pressure gauge, end exhaust manifold,

standard set of tools with adjustable

spanners, screw drivers, cylinder head

to cover, joint cylinder head to exhaust,

element lube oil filter, 12 / 24 volts

electric starting equipment complete

with standard heavy duty battery,

dynamo, cut-outs, ammeter, necessary

wiring, pressure gauge, starter etc and

heavy duty Residential type exhaust

silencer and vertical hot air duct logged

with asbestos rope, save oil trays,

exhaust piping of required length,

standard wall/floor mounted fuel with

level indicator and piping and drip

proof alternator, self-excited, self-

regulated, screen protected, with

excitation system, capable of delivering

the rated system output at 415 volts,

phase, 0.8 PF, 50 Hz, 4 wire, running at

1500 RPM, conforming to IS-4722-

with voltage regulation +/- 5% of

rated voltage from no load to full load.

Both the engine and alternator fitted on

a common fabricated steel base plate

with antivibration mounting engine

and alternator both connected to each

other by flexible flange coupling and

with floor/wall mounted control panel

box comprising of voltmeter ammeter,

selector switches, ACB / MCCB / MCB of

adequate capacity, indicator lamps duly

wired with HRC fuses. The alternator &

control panel shall be connected with

provided suitable capacity armoured

cable and complete with Acoustic

enclosure (canopy) made out of 16 SWG

CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick

conforming to IS:8183 / PU Foam of

Density - at least 40 mm. The resin

bonded rockwool covered from inside

the canopy by perforated sheet with 3/4

mm holes, sound level not more than

dB at a distance of 1 mtr, as per PVCT

norms. Erection, commissioning and

satisfactory testing as per requirement

with first filling of fuel, oil, etc. with

guarantee / Warrantee of complete

system for Two years. & with obtaining

all necessary certificate from Electrical

Inspector. The Capacity and Ratings of

DG sets are as below.

(A) Continuous Rating of 40 KVA, BHP

not less than 52 BHP

193 173. Providing & erecting approved make 1 Ea 97320.57

AMF control panel suitable for following

size of 3 phase, 415 V., 50 cycles, A.C.

diesel generating set complete of scope

as detailed below:

1) Power module: A pair of

electromechanically interlocked

contactors (for mains & generator)

Overload relay for generator contactor

Neutral contactor for mains and

generator Power socket for connections.

2) Control and metering module: Line

voltage monitor. Generator voltage

monitor Ammeter 3 items attempt start

facility. Air circuit breakers/MCB/MCCB

of suitable rating for auto/manual

operation. Auto/manual switch.

Emergency stop pushes buttons. Manual

start push button. frequency meter.

Engine hour meter. Two earthing studs.

3) Protection module: The engine

shutdown in the unlikely event of Low

lube oil pressure High cylinder head

temperature. V belt failure.

4) Indicators with alarm Load on

5) Indicators Load on mains Engine fails

to start. Emergency stop battery

The AMF Panel of following capacity

(A) AMF Control Panel for 50/62.5 KVA

194 174. Providing and erecting Approved make

Earth fault Relay suitable to mount with

inter connection suitable to following

size of moulded case circuit breaker

having CT ratio & MCCB rating as 1 Ea. 4687.41

following along with shunt trip 220V AC.

with all internal connections & complete

erected in existing M.S.housing..

195 175. Providing and erecting metallic vitrified

danger notice board as per language

suggested by engineer incharge for 3 Ea 69.69

MEDIUM VOLTAGE installation to be

erected as per IS-2551.

196 176. Providing following type of Modular

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate, modules 20 Ea 24.24

erected with necessary connections as

per site situation directed by Engineer

(7) Blank Plate Single

197 177. Providing and erecting XLPE(IS:7098)

(I)-88 ISI armoured cable multistrand 150 Mtr. 105.04

Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in

existing trench / pipe of following size of

(C) 3 core 6 Sq. mm

198 178. Providing and erecting XLPE (IS:7098)

(I)-88 ISI armoured cable multistrand /

Solid Aluminum conductor for 1.1 KV.

to be laid on wall with necessary 180 Mtr. 124.23

clamps or in existing trench / pipe of

following size of cables

(B) 4 core 6 Sq. mm

199 179. Providing and erecting XLPE (IS:7098)

(I)-88 ISI armoured cable

multistrand Aluminium conductor for

1.1 KV. to be laid on wall with 200 Mtr. 151.50

necessary clamps or in existing trench /

pipe of following size of cables

(A) 4 core 16 Sq. mm

200 180. Providing and, fixing heavy duty flange

type brass cable gland with rubber ring

for PVC insulated armored cable 8 Ea 38.38

complete without going tails, insulating

tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

201 181. Providing and, fixing heavy duty flange

type brass cable gland with rubber ring

for PVC insulated armored cable 4 Ea 47.47

complete without going tails, insulating

tape etc for following size of cables.

(D) 2 to 4 core 16 Sq. mm

202 182. Solder less crimping type Aluminium

lugs conforming to IS suitable for cable

of following size evenly crimped with

high pressure tool & connected to 28 Ea. 6.06

switchgear terminals with

brass/cadmium plated nut bolts in an

approved manner.

203 183. Solder less crimping type Aluminium

lugs conforming to IS suitable for cable

of following size evenly crimped with

high pressure tool & connected to 16 Ea. 15.15

switchgear terminals with

brass/cadmium plated nut bolts in an

approved manner.

204 184. Supplying & erecting earth pit of

minimum bore dia.150mm size

approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free 6 Ea 8636.51

hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron

galvanising, connection terminal dia of

12mm with constant ohmic value

surrounded by highly conductive

compound with high charge

dissipation suitable for following

type of applications with chamber

and heavy duty cover. (A)(approved

make OEM has to submit test

certificate including value of earth

resistance of installation duly

stamped and signed by agency and

officer Incharge has to ensure the

value of earthing resistane

mentioned in test Certificate) &

having back filling compound of (B)

Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar

<2%(C) Back fill Compound :-

Earthing compound should be capable

to retain moisture for long time

Necessary test report must be

submitted by Agency.

(c) For Electrical Installation

covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant

& Sensitive Computer System(like

Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of

205 185. Providing and erecting required size

Copper strip for earthing of H.T. OCB / 30 Kg. 794.87

ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

206 186. Providing and erecting required size

HOT deep Galvanised iron strip for

earthing of H.T., OCB/ ACB/ 20 Kg. 77.77

Transformer LT panel board, Motors etc.

using proper clamp.

207 187. Supplying and erecting approved make

oscillating type bracket fan A.C. 23OV.

50cy/s 400/450 mm sweep wall

mounted with height adjustment and 1 Ea 2534.09

rotary tilting device complete with

guard, flexible Core plug top complete

erected with lead wires as directed.

208 188. Providing & erecting Approved make

Power Saving 50-Watt Ceiling Fan with 30 Ea 1948.29

double ball bearing ISI mark with

Condenser 230-volt A.C. 50 Hz

mm sweep complete having 3blades

with aluminium blades with, canopy &

30 cm. down rod erected with earthing.

(Make shall be approved by Engineer in

209 189. Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S. Pipe

down rod erected duly painted for 30 Mtr. 108.07

fan complete with proper insulation

without leakage and earthing.

210 190. Supplying & erecting fan hook box of

10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. 30 Ea 108.07

box / Heavy Duty PVC box complete

erected concealed in Ceiling with

necessary finishing.

211 191. Providing 2. 5mm.thick laminated

acrylic sheet to cover the fan hook or 30 Ea. 18.18

212 192. Supplying & erecting approved make

low noise decorative exhaust fan having

square frame ABS body with inbuilt 8 Ea 1703.87

lowers & square frame.

200mm with 1350RPM Cat.II

213 193. Providing recess in wall or window

frame suitable for erection of Exhaust

fan complete with plastering and colour

washing to match the colour of the wall 8 Ea 189.88

or window complete with expanded

metal in order to render the fitting in

accessible and the room water-proof.

214 194. Supplying and erecting approved make

Instantaneous type water heater with

3Itr.capacity rust free container housed

in ABS plastic body insulated with glass

wool / puff insulation and 3 Kw heating 5 Ea. 4735.89

elements, adjustable thermostat 300 C

to 850 C with set to operate at 850 C (+

/-60 C) auto reset indication lamps,

thermal cut-out, safety valve fusible plug

etc. Premium Category

215 195. Supplying and erecting led lamps with

following wattage capacity of 220 to

voltage, minimum 15000 burning hours

life, 500 V in built-surge protection,

Polycarbonate diffuser, mounting 44 Ea 112.11

suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC

diffuser suitable LAMP holder

(ii) 5 to 8 watts cat - III

216 196. Supplying and erecting led lamps with 6 Ea 404.00

following wattage capacity of 220 to

voltage, minimum 15000 burning hours

life, 500 V in built-surge protection,

Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC

diffuser suitable LAMP holder

(v) 21 to 30 watts cat - III

217 197. Supplying and erecting LED indoor

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel

conforming to IS: 513/CRCA/

aluminium pressure die cast

powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body with

company mark/name 160V to

270V,Power Factor more than 0.95,

THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , 129 Ea 589.84

LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

(A) Square/ Circular shaped

Surface/Recessed Mount Downlight

with provision for spring loaded

mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV cat - III

218 198. Supplying and erecting LED indoor

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel

conforming to IS:

513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminum casted body with 30 Ea 758.51

company mark/name 160V to 270V,

Power Factor more than 0.95, THD <

%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt, LED driver

efficiency > 85 % (fitting required

LM-79 & LM-80 Certificates)

(NOTE: Below description have

shown ranges of Wattage capacity

of LED fittings. The Engineer in charge

may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped

Surface/Recessed Mount Downlight

with provision for spring loaded

mounting clips complete. IP20

(iv) 22-24 watts, Surge-2 KV cat - III

219 199. Supplying & erecting dual channel

amplifier ,power handling capacity of

180 watt ,four micro phone inputs with

independent level control ,built in FM

tuner, with preset memories, USB drive

& SD card for MP3 playback ,100v 1 Ea. 11128.18

/telephone input with priority and VOX,

frequency response-80 Hz to 18k Hz

Philips / /distortion less than 1% @

rated power up to 50 units [[Approved

by Competent Authority i.e. not Below

the rank of Executive Engineer ]

220 200. SITC of 3LCD Lamp based projector

having wxga (1280x800) or better

resolution with minimum white

brightness of 3800 lumens and color

brightness of 3800 lumens. The

projector should have minimum

1HDMI,1VGA input. Having contrast

ratio of 15000:1 or more. the projector

should have auto vertical key stone

correction of +/- 30 degree and Manual

Horizontal of +/-30 degree. the 1 Ea. 33895.60

projector should have optical lens,

throw ratio 1.30-1.56:1. Zoom Factor of

1.2. Lens focus Manual having focal

length 16.9mm to 20.28mm. projector

should have features like AV mute slide,

quick corner and split function and

should support wireless functionality

with inbuilt wifi or wifi dongle.

[Approved by Competent Authority i.e.

not Below the rank of Executive

221 201. SITC of 100-inch Self Lock MW (7 x 5)

Insta lock Slow Retraction Screen,

Aspect Ratio-4:3 [Approved by 1 Ea. 3810.73

Competent Authority i.e. not Below the

rank of Executive Engineer]

222 202. SITC of Rack Mounting kit for the control

[Approved by Competent Authority i.e. 1 Ea. 4814.67

not Below the rank of Executive

223 203. Providing and erecting water cooler

having storage capacity 80Ltr. & cooling 2 Ea. 41342.33

capacity 40 Ltr. per hour @ an ambient

temp of 45˚ C. The outlet temp. of the

water should drop by 15˚ C within a

hour, The water cooler should be

comprising of hermetically sealed

compressor, fan motor, condensing unit,

water tank surrounded by evaporating

coil, thermostats, relay etc. complete

with necessary inlet & outlet

connection. The body of water cooler

will be made from Stainless Steel. ◦

224 204. Supplying & erecting reverse

osmosis (RO) water purification

system with M.S. powder coated

pedestal frame, prefilter housing carbon

filter suitable buster DC pump, auto low

& high pressure switches with

following size of LPH capacity &

erected as directed

[D] 100 LPH with 1 phase / 3 phase Raw

water pump of 500LPH @ 2.5kg/cm2 2 Ea. 65052.08

- (1N0 - Kirloskar /CRI/Lubi), Dual

media filter 10"x54" - (1 No), Micron

cartridge filter 20" x 2.5" ( 1No), High

pressure pump 500LPH @ 10kg/cm2

- (1No - Shimge /CRI /Lubi), RO

Membrane housing with RO membrane

of 40*40 - (1No), RO pressure tube 4"

x 1E - ( 1No), 0 - 1200LPH Rotameter -(2

Nos), with Recovery Rate 50%.

225 205. Supplying and erecting approved make

Conical Pole (Standard ) Made from HR

sheet steel. The pole should be made as

per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759

with required base plate and integral

Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and 20 Ea. 6403.40

arrangement for cable terminationas

erected on suitable foundation

(included) with necessary GI nut-

bolts/J-Bolts. as per details given by

manufacturer considering site

requirement.The length of poles are as

(C) 5 Mtr. Long 65mm Top X140 mm

bottom dia, 3mm thickness.

226 206. Providing and erecting street light pole

bracket comprising main B Class MS

pipe of 4.2 cm/require outside dia. 20 Ea 561.56

complete with suitable B Class M.S.

sleeve tubing of approx.

45cms.length and suitable for

mm / 80mm. / require size pole top

having sufficient fasteners for fixing the

brackets and having spread of 1 mtr.

length with suitable rise as per site

condition & suitable welded

stiffener reducer and nipple with check

nut complete painted with one coat of

red oxide / PU base primer and two

coats of Aluminium / PU paint. paint

with following nos of arms.

[A] Single Arm bracket 1 Mtr

227 207. Supplying & erecting approved make

SMC press moulded composite FRP.

loop-in, loop- out approx. 2mm thick

box complete with Bakelite connector

strip 5way(3P+N+E), DIN rail for

mounting mob & hinged doors as

per requirement having locking 20 Ea 898.90

arrangements with mounting clamp

with nuts, bolts & washers suitable for

erection on pole with cable

clamps& earth bolt of following size of

(A) 300mm x 200mm x 100mm [deep]

228 208. Supplying and erecting LED street light

/ Flood light fittings with High power

White LEDs wattage of 3 Watt and

above assembled on single MCPCB,

efficiency more than 130 lm/w and

corrosion free High pressure die

cast aluminum housing with smooth

finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, 20 Ea 3345.12

Luminaire efficacy> 100 lumens/watt

. LED driver efficiency > 85 %. (fittings

79 & LM-80 certificates) (NOTE:

description have shown ranges of

Wattage capacity of LED fittings. The

Engineer in charge may select any

wattage capacity between the ranges

(A) Street Light (IP-65), Surge

protection -4KV integral and, Light

must have 440VAC line

supply with over-voltage protection.

(i) above 36 to 48 watts Cat-lll

229 209. Providing and fixing Terminal board of

size 5.0 x 127 x 152.4 mm. Bakelite

sheet with suitable brass studs with 20 Ea. 146.45

nuts, washers and clamps of size

25mm x 3mm suitable for pole painted

with one coat of red lead paint.

230 210. Supplying & erecting approved make

Digital time switch having lithium

cell 6 years operative and operate

battery backup 1 channel day clock

with 14 memory programme, suitable to

operate on 240V + 5%, 16A with,

floating contacts Minimum switching 1 Ea 3168.37

setup time 1 minimum & LCD display.

Also comprised permanent ON/OFF

switching. Programming switches &

housed in fire proof thermoplastic

enclosure & transparent cover

erected as required with necessary

connection erected as directed.

231 211. Supplying & erecting power

contactor, AC3 duty for time switch 1 Ea 1883.65

complete erected as per direction Cat III

(B) 2 pole 250V 32 Amp.

232 212. Supplying and erecting Flexible PVC

insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of 60 Mtr. 44.44

following size to be erected as directed.

(e) 1.50 Sq.mm 3 core round PVC

233 213. Supplying and erecting B class

Galvanized iron pipe having smooth

finished bore of the pipe on both ends

erected nuts and bolts along the pole / 80 Rmt 249.47

wall shaping the pipe as per site

requirement. Pipe dia as following.

234 214. Providing and erecting Pipe type

earthing with 40 mm dia 2.5 mtr long 'B'

grade G.I. pipe with necessary coupling

buch buried in specially prepared earth 20 Ea. 994.85

pit & G.I. earth wire of 8 SWG erected &

connected as directed (For panel)

For using salt and charcoal / coke as

required for pipe type earthing.

235 215. Providing & laying approved make

Double walled corrugated pipes

(DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting

accessories of same material at 350 Rmt 62.62

required depth in existing trench for

laying of cable. below ground / road

surface for enclosing cable

(A)50 mm outer dia

236 216. Providing & erecting 240 V MCB double

pole switch for lighting Load (B Curve)

having 10 KA breaking capacity & 20 Ea. 278.76

confirms to IS: 8828 in existing box

having following capacity

(A) 6 to 32 Amp. Cat-III

237 217. Making trench in Hard Murdrum / Tar

Road of suitable width of 90 cm or

required depth for laying any size of 150 Mtr. 62.62

cable or locating the fault all over the

run and back filling the same and

making the surface as normal ground.

238 218. Making trench in soft soil of suitable

width of 90 cm deep for laying cable or

locating the fault all over the run and 180 Mtr. 46.46

back filling the same and making the

surface as normal ground.

239 219. Supplying & erecting carbon dioxide

(CO2) fire extinguisher user of

following capacity with necessary 3 Ea 6591.26

clamps made from 50 x 6 mm M.S. Flat

with nut & bolts grouted in wall

complete. [A] For 4.5 Kg Capacity

240 220. Supplying & erecting ABC powder

type 'Ceasefire’ type Fire extinguisher 3 Ea 848.40

as per IS 13849 or 1 Kg capacity with

necessary clamp for erection on wall

241 221. Providing & erecting open well type

horizontal mono block pump set with

stainless steel body having following

specification (C) 1 H.P. single phase 1 Ea. 9613.18

open well motor pump set suitable for

185 LPM discharge @ 25 mtr. head,

suitable for 32 mm dia. Delivery pipe

with control panel. Cat III

242 222. Providing & erecting open well

horizontal mono block pump set with

cast iron body, complete for three phase

submersible motor having [C] For 3 HP

3 phase open well horizontal mono 1 Ea. 15707.52

block pump set suitable for 85 LPM to

270 LPM @ 11 mtr to 33 mtr head

suitable for 50/65 mm dia delivery pipe

243 223. Supplying & erecting approved make

Automatic liquid level controller 6A.

with sensor testing as per instruction of

Engineer in charge on site complete 2 Ea. 2355.32

with wiring connection with existing

wires, with copper conductor from

pump to upper and lower tank.

244 224. Supplying & erecting approved make

motor control cubical panel [Star delta] 1 Ea. 7250.79

made from 16G CRCA sheet duly epoxy

powder painted inside and outside

with hinged doors and locking with

suitable size of ON - OFF isolator (AC

/ 23 duty) main fuses. Digital volt and

current meter (in a single unit) with

micro controller based control unit

and current sensing single phasing

preventer electronic overload

protection, over voltage

(Programmable) protection and under

voltage (Programmable) protection,

prod less dry run protection

programming facility for setting of all

parameter like overload current, high

voltage limit, low voltage limit, dry run

limit with digital indication on seven

segment LED display for any fault like

over load, high voltage, low voltage,

dry running single crimped, electronic

star delta timer, feather touch start /

stop push buttons to be erected on

angle iron frame. Grouted on wall the

contactors will be of L& T, Siemens, BCH

make only) (A) DOL up to 5.0 H.P.

245 225. SITC of Analogue Addressable Manual

Call Point with Integral Short Circuit

Isolator, Analogue Addressable Protocol

having, Bi-colored status LED (red for

alarm, amber for (short-circuit), non-

frangible element fitted as standard 3 Ea 6060.00

(conforms to EN54), pulsing/non-

pulsing can selectable via panel,

electronically addressed, Approved by

LPCB. (Including Five-year free

maintenance with guarantee)

246 226. SITC of addressable loop powered Base

sounder with integral Beacon, includes

51 user- selectable tones (all tones

EN54-3 compatible), variable sound

output 50 ~ 98 dB(A) (±2 dB(A)) output

at 1 metre, Auto shut down feature 3 Ea 6741.75

prevents noise pollution, 'O' rated

beacon to EN-23, IP21 rated for internal

use, sounder and beacon can operate

independently, Approved by LPCB

(Including Five year free maintenance

with guarantee)

247 227. Supplying & laying of 2x1.5 sqmm fire

alarm armoured cable, 600/1000V

rated with annealed copper conductor 300 Mtr. 124.23

having XLPE insulation, steel wire

armouring & FRLS outer sheath

complete as required.

248 228. SITC of Microprocessor based Net-

workable Analogue Addressable Fire

Alarm Control Panel. The Panel shall be

compliant with EN54-2, EN54-4 and

approved by LPCB. The Fire Alarm

Control Panel shall have inbuilt 3 loops

and expandable upto 4 Loops. The Panel

must have large graphic display. The

Panel must also have the capability to

take Addressable Intelligent Wired and 1 Ea 221190.00

Wireless Devices on same loop. Each

loop shall have a capacity of

analogue Addressable devices and

Base sounders/Base Sounder Beacons.

The Panel shall have 240 V AC power

supply along with automatic Battery

Charger. Approved by LPCB (Including

Five-year free maintenance with

249 229. Supply, Installation, Testing and

Commissioning of 4MP Varifocal Lens

Dome Type Camera, H.265 4MP IR

Turret Dome N/W Camera, Manual

Varifocal 2.8-12mm, 50M, Micro SD,