DEPOSIT-Providing wire mesh around the openings and other alied works in FM and RM stores in Pharmacy Building, Ayurveda college Thiruvananthapuram-Civil works-General Civil Work

15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below

15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

9.147F.3:Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm)

OD342992/2025-2026:Providing and fixing uPVC panel in uPVC casement/sliding door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. (NB: EPDM rubber/ neoprene gasket shall be paid in original item) complete as per the directions of Engineers-in-Charge.

OD342994/2025-2026:Providing and fixing glazing in UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of UPVC frame shall be paid in basic item): 8mm thick toughened glass. Based on 21.3.3

OD343008/2025-2026:Providing and fixing stainless steel tower bolts ,ISI marked ,to required colour or shade,with necessary screws etc complete:100x10 mm

OD335438/2025-2026:Providing and fixing GI Weld Mesh(opening size 25x25mm and having wire diameter of at least 3.8 mm) on frames (paid separately) including all cost of materials and labour charges etc complete as per the direction of Engineer-in -Charge

OD335451/2025-2026:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position, welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. MS Tubular sections (Priming coat to be paid separately)