Supply and Construction of a high must light with 2(two) years replacement warranty at Dashamighat under of Boxanagar Electrical Sub Division.(Partial trunky Basis)

Amount

A) Supply of the following as per Bid document and as per standard practice of TSECL:-

Highmast Part:- Height : 30Mtr Thickness : TOP - 3 MM . Middle - 4 mm . Bottom 5 mm Diameter : TOP - 150 MM . Bottom 540 mm High mast suitable for fixture : Numbers - 12 NOS . TYPE FLOOD LIGHT ORIENTATION SYMMETRIC : WIND SPEED 180 KMPH , Non Flame Proof Motor , Movable lantern carriage , Double drum Winch , 6 mm 316 Grade S S Hoisting Ropes of 7/19 construction . Trailing Cable -1 per mast ( 5 Core 2.5 Sq mm ) , Lightning Finial , Anchor Plate & Template . Foundation Bolt & Nuts

LED Aviation light Twin

Feeder Panel ( As per attached drawing )

Fixtures: 300W LED Flood light12nos @ 40000x12

Supply of fabricated Bracket clamp for cross arm

Supply of fabricated Stay clamp pair for erection of stay set

wooden plunk with 100 Amps Cutout

Erection of the following as per standard practice of the TSECL:-

Erection of 9 Mtr long PCC Pole

Erection of painted Stay Set Complete

11 KV Polimetric pin Insulator with G.I pin complete

11 KV Polymer Disc Insulator with fittings

M.S Channel Cross arm 2.8 Mtr Long (100X50x50x6mm)(Excluding the Cost of Back Clamp ,Nuts & Bolts for Sub-station

M.S Channel Cross arm 0.8 Mtr Long (100x50x50x6mm)

M.S Channel Cross arm 2.8 Mtr Long (75X40x40x6mm)(Excluding the Cost of Back Clamp ,Nuts & Bolts for sub-station

Erection of M.S Angle cross Arm -Arm 2.8 Mtr Long 65x65x65 for Transformer G.O Handle (Excluding the cost of back clamp,nuts Bolts )

Earthing with 2.5 Mtr Long and 40 mm dia G.I pipe

Shackle Insulator

ACSR (6/1/2.59 Sq mm)

11 KV,200 GOS Set of Three Nos i/c necessary connections Complete as per technical Specification (Excluding the cost of back clamp, nuts & Bolts)

11 KV,200 GOS Set of Three Nos i/c necessary connections Complete as per technical Specification (Excluding the cost of back clamp, nuts & Bolts)

9KV,5 KA Single pole metal oxide gapless type LA i.c necessary connections complete as per technical Specification

Installation/positioning and commissioning of 11/0.430kv, 25 KVA, 3-phase Distribution transformer on pole with necessary accessories components as required in all respect pole height of 2440mm (approx) above the ground level in double MS channel support

Clear & Cutting of Jungle

C ) Supply & Errection Followings :-

Accessories like Plug and Socket , GI Nut bolt with double washer , wiring cable for fixture , flexible conduit , copper lug , PVC tape , Cable tie etc are in scope .

Installation , Testing & Commissioning , Casting of foundation for High Mast & Panel @ 10T / sqm soil bearing

Earthing for High Mast & Panel , Power Supply up to the Panel & Cable laying , Providing Power Cable from High Mast to Panel .

Crane for Installation of High Mast , Unloading of Material , Shifting of Material from Stores to Site

D ) Carriage of the Followings:-

Materials carriage from material management Division ,AD Nagar To Boxanagar Store (including transformer)

9 Mtr PCC Pole boxanagar Sub-division store to work site

Carrige of A.C.S.R ,G.I Wire ,Cross arm , Stay Set ,Insulator , G.O.S ,D.O.F .L.A and mechanical tarnsport from the Electrical Sub-Division site store to working site vise versa ,Including loading and unloading

M/S Saha Trading (BID ID -142268)