SPECIAL REPAIR WORKS TO KALLELI AYURVEDA DISPESARY IN ARUVAPPULAM GRAMA PANCHAYATHU

Amount

DETAILED SHEET

14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.46 : Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

od73378/2019_2020 : Chipping and removing portions of existing plastering. work carefully without damaging the remaining structure and removing the debris with in a distance of 150m etc.

11.20.3 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.39 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

9.37.1 : Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS : 1328 (type - 1) for plain lining / cladding with necessary screws, including priming coat on unexposed surface with:Decorative veneer facings of approved manufacture

21.1.1.1 : For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

od73742/2019_2020 : Supplying and fixing Horizontal venetian blinds fixing in windows etc .The leaves are of 20 mm width and fixed on good quality channel including its rope , clip etc Complete

7.38.1.1 : 8 mm thick (mirror polished and machine cut edge)Granite stone of any colour and shade

7.42 : Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts bolts and washer ( total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer - in - charge.Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts bolts and washer ( total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer - in - charge.

8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

8.6 : Mirror polishing on marble work/ granite work/stone work where ever required to give high gloss finish complete.Mirror polishing on marble work/ granite work/stone work where ever required to give high gloss finish complete.

17.34.2 : Providing and fixing toilet paper holder:Vitreous china

18.58.2.1 : Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating

26.10 : Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mmnominal thickness of approved shade, quality and make, made from rigid foamsheets (Single extruded) having density 600 Kg/cum and laminated on bothside by laminate Sheet/PVC foil lamination. The exposed edges shall be sealedwith PVC edge beading of same shade and colour. The shutter shall be fireretardent having necessary screw holding capacity. Shutter shall be fixed toframe using approved hinges with necessary stainless steel screws, allcomplete as per direction of Engineer-in-charge.

od73743/2019_2020 : Providing and fixing PTMT Soap Dish Holder having concealed fittings arrangements, weighing not less than 106 gms

od73744/2019_2020 : Providing and fixing PTMT liquid soap container (AIOXA) as per the direction of engineer in charge

od73745/2019_2020 : Providing and fixing Counter top wash basin with C.I. brackets, 15 mm C.P. brass pillar cock, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Counter top wash basin size 470 x 300 mm with a single 15 mm C.P. brass pillar cock

od73748/2019_2020 : Providing and fixing C.P. brass shower rose (Jaquar OHS-CHR 1985 or equivalant) and C.P. brass Shower arm (Jaquar SHA-483 or equivalant)

od73749/2019_2020 : Acid washing the flooring using mild HCL acid for cleaning the floor, including cost of acid, labour charges etc, complete

od73747/2019_2020 : Supplying and fixing CP Health faucet (JAQUAR model ALD 573 or equivalant) including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

od73875/2019_2020 : Providing and fixing 4 mm thick Aluminium Composite Panel, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

od73876/2019_2020 : : Supplying fabricating and fixing Stainless Steel embossed letter Malayalam font of size 20 cm height to the name board with bolts and nuts, drilling and fixing to the panel with synthetic resin adhesive to correct lines and levels as per the direction of departmental officers.

od73877/2019_2020 : supplying fabricating and fixing Stainless steel embossed letters Malayalam font of size 30 cm height to the name board with bolt and nuts, drilling and fixing to the panel with synthetic resin adhesive to correct lines and levels as per the direction of the departmental officers

od73878/2019_2020 :  Providing vinyl lettering of 6cm height including fixing charges

od73879/2019_2020 : Providing vinyl lettering of 4cm height including fixing charges

od73880/2019_2020 :  Providing vinyl emblem of 15 to 20 cm height including fixing charges etc complete

GEORGE VARGHESE

Bidder Name

PRADHUSOODANAN PILLAI

GEORGE VARGHESE