Renovation of District Treasury Office at Dahod Dist. Dahod

Name of Work :- Renovation of District Treasury Office at Dahod, Dist. Dahod

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

1 Providing and fixing curtain with premium brand fabric, Curtain with Blackout 201.00 Sqm. 858.50

aster on back side with and standard stitching with matching threads,

Curtain work inclodes back side premium belt for Keeping curtain channels

clip. Curtain with Premium Quality brand fabrics complete. Curtain with M-

100 Profile which is of extruded Aluminium Alloy. Curtain M-100 Aluminium

track profile install with center adjustable brackets and with required

necessery hardware.Complete as directed by Architect and engineer in

2 Providing and fixing medium back revolving chair, Chair with five nos metal 45.00 Nos. 7575.00

prong stand with Hydraulic gas lift system, Chair with seat and back

moulded cushion, Chair with Push back mechanisum, Chair with chrome

finish handle, Complete as directed by engineer-in charge. Size: max.

Height 1070mm, Min.970mm, Seat: 490mm x 510 mm, Back: 640 mm x

3 Providing and fixing Table made from 18mm thick BWP plywood with 1 mm 22.00 Nos. 12120.00

thick Laminate Finish, all the edges are finish with teakwood batten and

finish with malamine polish, Table having one side drawer unit with one nos

of draer and shutter, Drawer with soft close channel of standard make,

Table having one nos of foot rest. All edges finish with laminate. Table size

is 1200 x 750 x 750h complete as per drawing given by architect & direction

given by Engineer in charge

4 Cupboard made from 18mmm thick MR grade plywood board With all the 8.00 Nos. 20200.00

edges will finish with 2mm thick edge beading with hot melt glue and

beading will finish properly with throughfeed edge beading machine, Inside

cupboard required Two drawer and self, Drawer with standard locking

system and working on standard chaneel with SS finish handel, Inside and

all the area will finish with laminate, Cupboard made from 18mm thick grade

plywood board and all the hardware required of standard quality, Door are

hinged on hinges with necessery hardware, Doors required standard stopper

and laminate finish base, Cupboard with adjustable self system required and

with necessery hardware and fixing, Cupboard with standard

5 Providing and installation of Sqaure workstation having Seating Size for one 20.00 Seat 12120.00

Seat size 910 (L) x 600 (D) x 750/1200 MM (H) of comprising of MS powder

coated partition panels of thickness 75mm(double skinned system), with

powder coated MS frames inside of 16 guage. Infills are of partical board

with cladding of 9mm thk particle board tiles on both sides. Fascia/surface of

the panel can be given in fabric/soft board/ white board/half glass. All

exposed profiles, connectors are in powder coated aluminium. The

horizontal bottom of each panel will be given with an inbuilt wire

management system of 100mm ht covered by MS powder coated raceway

panel. A pair of Level adjusters are provided with each panel. All worktops

are in 25mm thk prelaminated MDF with edge lipping & vertical legs are in

18mm thk prelaminated MDF with lipped edges. Along with metal cpu trolly

and metallic key board tray (ebco make). Each work station should be

provided with modular Electrical fittings with 3 switch and 3 sockets, and

One LAN point at the down part of work station (No extra/additional cost will

be paid for conduit, wireing CAT-6 etc. Contractor should provide all

necessary installation, commissioning etc. As per detail drawing & choice of

users department and Concern officers in charge as directed by the

Architect/Engineer.

Rs. Eleven Lakh Eighty Four Thousand Seventy Three and Fifty Paisa Only.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. The Contractor will have to submit the mix design for different grades of cement concrete at his own cost before

execution as directed and to be approved from the Engineer in charge.

6. Dismantalled materials of amount of Rs. 0.00 must be recovered from 1st R.A. bill of Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Dahod (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,

Dahod Dahod Dahod