DGM/ED-KCP/23-24/19

Amount

Supply of the following line materials

100 kva Distribution Transformer

63 kva Distribution Transformer

25 kva Distribution Transformer

16 kva Distribution Transformer

8.0 mtr long Galvonized Tubular pole

Stayset complete

Stay wire (7/2.5 mm dia.)

11KV Stay insulator

11kv Polimeric Disc insulator (45KN)

11 kv Disc fittings

11kv Polimeric Pin insulator

LT Shackle insulator

11kv Polymeric G.O. Switch, 3 phase

11kv Polymeric D.O. fuse, 3 phase

11KV L.A (9 KV, 5KA)

Galvanized channel (100x50x50x6mm)

Galvanized channel of size 75x50x50x6mm dia (DP-35, SP-65, Hight maintain-20pole, S/S-3nos & Branch GO-2)

Galvanized angle of size 65x65x6 dia (DP-35, SP-65, S/S-2nos, DP cross connection-35 & Branch GO-2)

Galvanized angle of size 50x50x6mm dia (1.5 mtr long C Bkt)

ACSR (3/1/2.59 mm dia.)

10swg GI wire

HT Danger plate

Barbed wire

Cut out 300 amps

PVC Cable 120 mm2

Bimetallic Lugs of size 95

Bimetallic Lugs of size 120

8'x12" Wooden Board for Meter & 16A Cut out

4'x6" Wooden Board for with 3 board switch & 1 pin Point

3'x3" Wooden Board with 2 Angle Holder

Wooden Batton (20X8X0.5 inch per each)

Main Switch ISI Mark

2.5 sq mm PVC cable 2-core alluminium for service connection.

1.5 sq mm PVC wire 2-core alluminium for internal wiring

GI 10mm for Service connection

Real Insularor

Fabricated GI Clamp Made of 50x6mm for (11kv Line 515Nos + Hight maintain- 80nos + S/S 32 Nos + 110nos LT line + Branch G.O.-20 Nos)

Fabricated GI Clamp Made of 50x6mm for LT Shackle U type

Fabricated GI Clamp Made of 50x6mm for Stay set

Fabricated GI Clamp Made of 50x6mm for DP Cross connection arm

MS Nuts & Bolts i/c washer of assorted size

16A cutout

2 Balb & 2 Holder

Supply of 60 kg Salt & 55 kg Charcoal (1 pit)

2.5 mtr long, 40 mm dia G.I pipe (TATA/ JINDAL make)

Wooden plank

Dismentalling of the following line materials

63 KVA Distribution Transformer (damage)

25 KVA Distribution Transformer (damage)

Providing single phase Service Connection

A.C.S.R. (6/1/2.59 mm)

GI Wire (10SWG)

Cradle guard

11KV Disc insulator with fittings

11KV Pin Insulator with GI pin

LT Shackle insulator

Stay Set Complete

11 KV G.O.S. 3-phase (Damage)

11 KV D.O.F. 3-phase (Damage)

11 KV L.A. Set (Damage)

3.2 Mtr. Long Galvanized Angle of Size 65x65x6mm for DP cross arm

2.2 Mtr. Long Galvanized Angle of Size 65x65x6mm for DP cross arm

SP Top X-arm of 0.3 Mtr. Long Galvanized Channel of Size 75x40x40x6mm

SP bottom X-arm of 1.2 Mtr. Long Galvanized Channel of Size 75x40x40x6mm

SP Guard X-arm of 1.5 Mtr. Long Galvanized Angle of Size 65x65x6 mm.

DP Top X-arm of 2.2 Mtr. Long Galvanized Channel of Size 75x40x40x6mm.

DP Top Guard X-arm of 2.5 Mtr. Long Galvanized Channel of Size 65x65x6 mm.

LT 4-wire C Bracket

Uprooting of 9.00 Mtr long Galvonized Steel pole (D.P.)

Uprooting of 9.00 Mtr long Galvonized Steel pole (S.P.)

Uprooting of 8.00 Mtr long Galvonized Steel pole (LT line.)

Erection of the following line materials

9.00 Mtr. Long Galvonized tubuler Pole

8.00 Mtr. Long Galvonized tubuler Pole

3.5 Mtr. Long Galvanized Channel of Size 75x50x50x6mm for hight maintain on 20 Nos of Steel pole.

3.2 Mtr. Long Galvanized Angle of Size 65x65x6mm for DP cross arm

2.2 Mtr. Long Galvanized Angle of Size 65x65x6mm for DP cross arm

2.8 Mtr. Long Galvanized Channel of Size 100x50x50x6mm for DT support

0.6 Mtr. Long Galvanized Channel of Size 100x50x50x6mm for DT support

2.8 Mtr. Long Galvanized Channel of Size 75x50x50x6mm for GO, DO, LA & GO pipe

SP Top X-arm of 0.3 Mtr. Long Galvanized Channel of Size 75x40x40x6mm

SP bottom X-arm of 1.2 Mtr. Long Galvanized Channel of Size 75x40x40x6mm

SP Gaurd X-arm of 1.6 Mtr. Long Galvanized Angle of Size 65x65x6 mm.

DP Top X-arm of 2.2 Mtr. Long Galvanized Channel of Size 75x40x40x6mm.

DP Top Guard X-arm of 2.5 Mtr. Long Galvanized Channel of Size 65x65x6 mm.

2.5 Mtr. Long Galvanized Channel of Size 75x50x50x6mm for line GO, DO & GO pipe.

LT 4-wire C Bracket

11KV polymeric disc insulator with fittings

11KV Polymetric Pin Insulator

LT Shackle insulator

Stay Set Complete

A.C.S.R. (6/1/2.59 mm)

GI Wire (10SWG)

11 KV G.O.S. 3-phase

11 KV D.O.F. 3-phase

11 KV L.A. Set

Cradle Guard (HT)

Danger plate

Erection of barbed wire per pole

100 KVA Distribution Transformer

63 KVA Distribution Transformer

25 KVA Distribution Transformer

16 KVA Distribution Transformer

Re-erection Single phase Service Connection with GI wire Reel insulator etc as required

Providing Single phase Service Connection with fitting fixing of board, main switch, switch point cutout holder etc as required

Construction of Sub-station Fencing with barbed wire, errection supply & errection of barbed wire fencing of MS Angle ( 6Nos. 65x65x6mm & 4Nos . 50x50x6 mm)& provision of gate ( to be fabricated by 35x35x6 mm M.S. Angle-20x6mm M.S. Flat ) fixed with supports of fencing belted at top by 35x35x6 mm M.S. Anglethrough out with provision of hings & locking arragement etc. as per approved design & drawing of ED-KCP .

Earthing with GI pipe 2.5mtr long and 40 mm dia, including excavation, refilling with alternate layer of salt and charcoal as per drawing (excluding supply of GI pipe, salt and charcoal, GI wire, Nuts & bolts etc. As required).

Grouting of Steel Tubular Poles with CC work ratio 1:2:4 (1 Cement :2 River Sand :4 Jhama Brick agreegate of 20 mm normal size ) including supply of Cement, Sand & brick aggregate complete with excavation , refilling of earth , ramming along with centering & shuttering as reqd. (0.275 Cum / Steel Tubular Pole)

HIRING OF VEHICLE

Carriage of 9.0.00 mtr. Length of Gelvonized Steel Pole by mechanical transport from Dasda Electrical Sub-Divisional sitestore to work site vis-a-vis including loading, unloading & stacking as required.

a)Beyond 25 km upto lead of 50 km

ii) Beyond 4 poles

Carriage of 1(one)no- 100 KVA transformer from Dasda Electrical Storeyard to work site by mechanical transport including Loading, Un-loading & Stacking etc. as required. .

a)Beyond 25 km upto lead of 50 km

Carriage of 1(one)no- 63 KVA transformer from Dasda Electrical Storeyard to work site by mechanical transport including Loading, Un-loading & Stacking etc. as required and back Damage DT

a) Upto lead 25 km

Carriage of 1(one)no- 25 KVA transformer from SK Shermun to Dasda Electrical Storeyard by mechanical transport including Loading, Un-loading & Stacking etc. as required and back Damage DT

a) Upto lead 25 km

Carriage of 1(one)no- 16 KVA transformer from SK Shermun to Dasda Electrical Storeyard by mechanical transport including Loading, Un-loading & Stacking etc. as required

a) Upto lead 25 km

Carriage of line materials such as Cable, AAC, AAAC, ACSR, GI wire, Cross arm, stay set, insulators etc by mechanical transport from the electrical Sub-Divisional sitestore to working site vis-a-vis including loading, unloading & stacking as required.

a)Beyond 25 km upto lead of 50 km

Carriage of materials such as G.O.S, D.O.F, LA etc by mechanical transport from the electrical Sub-Divisional sitestore to working site vis-a-vis including loading, unloading & stacking as required.

a)Beyond 25 km upto lead of 50 km

Manual carriage of 8.00 / 9.00 mtr. Length of Steel tubuler Pole approx. 2km Each pole from Jaliram to Sachindra Parra i/e including loading, unloading & stacking as required.

Manual carriage of line materials approx. 2km such as Cable, AAC, AAAC, ACSR, GI wire, Cross arm, stay set, insulators etc from Jaliram to Sachindra Parra including loading, unloading & stacking as required.

Re-stringing of the following

a) ACSR 6/1/2.59 mm dia

b) G.I. Wire 8 SWG

Fabrication & Gungle cutting

Fabrication of all X-Arm by Galvanized Angle / Channel etc.

Jungle cutting

Fitting, fixing of Sub-station cable jointing & cutout.