New Drainage and Storm drainage line laying work and upgradation work and maintainance work at Tp- 50 area & diff.places in bodakdev ward Nwz.(ARC)

Providing and laying in position Ready Mixed M200 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C.

30 15.00 from transit mixer to site of laying, excluding the cost of 4793.10 Cu.M.

centering shuttering finishing and reinforcement including cost

of admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability

without impairi ng strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (R &B SOR 2023-24

Ahmedabad cit; Item no. 5055 Page no. 66)

Labour charger for lowering existing Ventilating column safely

with the help of required capacity of hydra crane or any type of

required capacity of crane. Item also includes welding machine

31 5.00 gas cutter , electric cutter , breaker etc necessary machineries 5803.57 No

required for this work with out damage and item also includes

carting the same to the AMC store. etc. comp as

directed.(Based on Drainage SOR 2009-10)

Constructing Bombay Pattern Type Catch Pit of size 0.60 x

depth up to 1 mt including excavation, B.B.C.C. (1:5:10),

cms thick brick maso. wall in the prop. of CM (1:6) with 40 mm

32 30.00 thick IPS flooring in the prop M15 at bottom and 15 mm thick 3125.00 No

cement plaster inside the catch pit in the proportion of CM (1:3)

with out jali etc. comp. as directed.(Based on Drainage SOR

2009-10)After Deduction 12 % GST)

CatchPit Jali Fixing P/F FRC catch pit jali with frame 600mm

x 600mm clear opening etc. comp. As directed by engineer in

33 45.00 charge. (Based on Drainage SOR 2009-10)After Deduction 12 1383.92 No

Providing, laying and jointing in true line and level U.P.V.C pipe

(SCH - 40) of following dia. including fittings of standard make

as approved by Engineer - in - charge. Pipe shall be fixed on

the wall with the help of clamp at every shall be concealed as

34 directed including necessary Tee ,bend, any joint & any fittings

etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials ((R &B SOR

A 1.00 15 mm (I.code no. 23061) 71.93 RMT

B 1.00 25 mm (I.code no. 23062) 90.93 RMT

C 1.00 32 mm (I.code no.23063) 117.93 RMT

D 1.00 40 mm (I.code no. 23064) 146.65 RMT

E 1.00 50 mm (I.code no. 23065) 193.73 RMT

F 1.00 110mm (I.code no. 23067) 826.88 RMT

G 1.00 160 mm (I.code no. 23066) 822.99 RMT

Providing, supplying & fixing to wall ceiling and floor 10.0 kg.

F/Cm2 working pressure polythelene pipes of the following

outside dia. Low density. Complete with special flange

35 empression type fittings. Wall clips etc. incl. making good the

wall ceilling and floor. ( Item Code 23004F & 23004G No

PG No.164 .Ahmedabad City S.OR.2023-24

Providing and operation dewatering Pump including fuel

charges & operator Charges etc. as directed etc. comp. (Shift

36 350.00 for Eight Hour) (For Each Pump Set, No payment should be 535.71 Shift

allowed for non working condition of machinery)

Dewatering by pumping set

Dewatering by pumping set of required capacity including

temporary platform carting pumping at site and fixing the same

in position including all accessories, and fuel and labour etc.

complete. (GWSSB SOR 2022-23 (revised) Section 2E item

no. 1 on page no. 154)

Hiring and operating the 20 KV 3 Phase Electric Generator for

operating desilting machinery, and lighting and other

requirements with Arranging diesel to run the D.G. Set Do As

38 49.00 Directed. 8 Hrs Shift. (No payment should be allowed for non 2500.00 Shift

working condition of machinery) (Based on Drainage SOR

2009-10)After Deduction 12 % GST)

Providing & Supplying JCB Machine on rental basis in case of

emergency situation and break down type work & also during

unavoidable condition as per instruction of engg. in charge, rate

includes all nece. shifting, fuel and operating charges and

39 240.00 stacking of useful & non-useful materials separately up to store. 535.71 Hour

(No payment should be allowed for non working condition of

machinery and for pipe line excavation and laying work) (Based

on Drainage SOR 2009-10)After Deduction 12 % GST)

Supplying Pneumatic Breaker Machine for RCC Slab or Asphalt

Demolishing Work on site by using Operator, fuel, power Supply

etc. Complete as Directed. (No payment should be allowed for

40 10.00 non working condition of machinery and for pipe line excavation 535.71 HR.

and M.H. work. Allowed only for break down work) (Based on

Drainage SOR 2009-10)After Deduction 12 % GST)

Providing & Supplying Hitachi Machine-110 capacity on rental

basis in case of emergency situation and break down type work

& also during unavoidable condition as per instruction of engg.

41 20.00 in charge, rate includes all nece. shifting, fuel and operating 1785.71 HR.

charges . (No payment should be allowed for non working

condition of machinery)

Providing & Supplying Hitachi Machine-200 capacity on rental

basis in case of emergency situation and break down type work

& also during unavoidable condition as per instruction of

42 20.00 engg.incharge , rate includes all nece. shifting, fuel and 2471.20 HR.

operating charges. (No payment should be allowed for non

working condition of machinery) (Based on Drainage SOR

2009-10)After Deduction 12 % GST)

Providing & Supplying hydra carne Machine of 12 tone capacity

on rental basis in case of emergency situation and break down

type work & also during unavoidable condition as per instruction

of engg. in charge, rate includes all nece. shifting, fuel and Per 8 hr

operating charges. (No payment should be allowed for non Shift

working condition of machinery) (GWSSB SOR 2022-23

(revised) Section 2E item no. 7 on Page no. 155)

Providing F.R.C. MH seat cover incl. carting to the work

site etc. comp. Directed. (Rates are based on Central

Store circular no. 01/2025-26 Dt. 21.04.2025)

F.R.C. Extra Heavy Duty (EHD-35) Manhole

Covers & Frames Cover : 728mm ø & 100 mm thick

circular cover, 35.00 MT load design, 100x2mm MS flat

allround, 16mm ø plain round bar for lifting the cover

& should be fitted with plastic cups. Frame : 560 mm ø

a 15.00 clear opening, outer size- 888x888x175 mm. On the 6165.25 Set

upper periphery of frame 25 x 3 mm wide MS flat should

be well embed in concrete to protect the edges of

frame. FRC E.H.D.-35 manhole cover & frame

described as above

( Only Cover ) F.R.C. Extra Heavy Duty [EHD-35]

Machinehole Covers & Frame- 560mm ø clear

opening, The dimension of frame and cover as

( Only Frame ) F.R.C. Extra Heavy Duty [EHD-35]

Machinehole Covers & Frame- 560mm ø clear

opening, The dimension of frame and cover as per

45 F.R.C. Heavy Duty [HD-20] Machinehole

(SET cover and frame) F.R.C. Heavy Duty [HD-20]

Machinehole Covers & Frames- 560mm ø clear

A 30.00 opening, The dimension of frame and cover as per 5889.83 Set

mentioned in Amend No.1 to IS 12592 : 2002 table

(Only Cover) F.R.C. Heavy Duty [HD-20]

Machinehole Covers & Frames- 560mm ø clear

B 30.00 opening, The dimension of frame and cover as per 3177.97 No

mentioned in Amend No.1 to IS 12592 : 2002 table

(Only Frame ) F.R.C. Heavy Duty [HD-20]

Machinehole Covers & Frames- 560mm ø clear

C 30.00 opening, The dimension of frame and cover as per 3029.66 No

mentioned in Amend No.1 to IS 12592 : 2002 table

46 F.R.C. Medium Duty [MD-10] Machine hole

(SET cover and frame) F.R.C. Medium Duty [MD-10]

Machinehole Covers & Frames- 560mm ø clear

A 10.00 opening, The dimension of frame and cover as per 4025.42 Set.

mentioned in Amend No.1 to IS 12592 : 2002 table

(SET cover and frame)

(Only Cover ) F.R.C. Medium Duty [MD-10]

Machinehole Covers & Frames- 560mm ø clear

B 10.00 opening, The dimension of frame and cover as per 2224.58 No.

mentioned in Amend No.1 to IS 12592 : 2002 table

(Only Frame ) F.R.C. Medium Duty [MD-10]

Machinehole Covers & Frames- 560mm ø clear

C 10.00 opening, The dimension of frame and cover as per 2076.27 No

mentioned in Amend No.1 to IS 12592 : 2002 table

F.R.C. Strom water Grating Set Grating (jali) 740 x

X 90 mm Square Jali. 20.00 MT Load Design , 90 X2 mm

MS Flat Around, Frame : 600 X 600 mm clear opening,

outer size 900 x 900 x165 mm. om upper periphery of

47 20.00 frame 25 x 3 mm wide MS Flate Should be well embded 5173.73 No

in concrete to protect the edge Frame comp.. As directed

by engineer in charge. (Rates are based on Central

Store circular no. 02/2024-25 Dt. 14.10.2024)

F.R.C. Strom water Grating Set Grating (jali) 690 x 690X

70 mm Square Jali. 20.00 MT Load Design , 70 X2 mm

MS Flat Around, Frame : 600 X 600 mm clear opening,

outer size 800 x 800 x120 mm. om upper periphery of

48 20.00 frame 25 x 3 mm wide MS Flate Should be well embded 4741.53 No

in concrete to protect the edge Frame comp.. As directed

by engineer in charge. (Rates are based on Central

Store circular no. 02/2024-25 Dt. 14.10.2024)

F.R.C. Strom water Grating Set Grating (jali) 620 x

X 75 mm Square Jali. 20.00 MT Load Design ,75 X1.2

mm MS Flat Around, Frame : 500 X 500 mm clear

opening, outer size 770 x 770 x135 mm. om upper

periphery of frame 25 x 31.5 mm wide MS Flate

49 20.00 Should be well embded in concrete to protect the edge 4734.75 No

Frame comp.. As directed by engineer in charge.

(Rates are based on Central Store circular no. 02/2024-

Filling in plinth with sand under floors including

watering ramming, consolidating and dressing

complete (R &B SOR 2023-24 Ahmedabad cit; Item no.

Providing, laying, spreading and compacting graded

stone aggregate to wet mix macadam specification

including premixing the Material with water at OMC in

mechanical mix plant carriage of mixed Material by tipper

51 to site, laying in uniform layers in sub- base / base course

on well prepared surface and compacting with vibratory

roller to achieve the desired density as per Codal

a 50.00 Production & Supply of WMM 1975.00 Cmt

b 50.00 Laying of WMM 35.00 Cmt

Providing and lying of Class SN8 Structured wall

polyethene piping systems (pipe with onlin/offline coupler

and elstomeric sealing ring ) with non smooth external

annular corrugated ans smooth internal surfaces (Double

wall ) for non pressure undregroudn sewerages &

52 Drainage application as per EN : 13476-3 including all

local and central taxes,transporation ,freight

charges,octroi,inspection charges,loading, unloading

,conveyace to the departmental stores etc.comleed (ID

dia) ( GWSSB SOR 2021-22)

To provide Tata ACE type vehicles on rent for 8 hours

daily for various activities in the ward of Ahmedabad

53 55.00 Municipal Corporation for transportation of goods & as 1,179.99 shit

per instruction of engineer in charge.

Raising of Existing manhole. Item includes, cutting of

existing road surround by Manhole by diamond cutter

machine, dismantling of road in confined area by breaker

machine and carting of dismantled material. Item also

included necessary brick work to raise the manhole at

road level in CM 1:3. Item also included fixing of

Manhole frame at exact road level by using fibre

54 10.00 reinforced thixotropic repair mortar material, Laying of 6,815.32 Nos

concrete made from special bonding chemical flowable

micro concrete material in desired thickness and laying

of hot mix bituminous material in upper layer and

compaction of hot mix bituminous material by Plate

compactor machine. Rate also included necessary

plaster at inside of manhole in CM 1:3 in 20 mm

thickness on raised brickwork. (AMC approved rate)

CatchPit Jali (Heavy duty) Fixing P/F FRC catch pit jali

with frame 600mm x 600mm clear opening etc. comp..

As directed by engineer in charge. (AMC approved Rate)

15.00 20MT CAPACITY 3,178.50 Nos

15.00 35MT CAPACITY 3,784.82 Nos

Providing and supplying of Class SN8 Structured Wall

polyethelene Piping systems (Pipe with online/offline

coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal

Surfaces (Double Wall) for non-pressure underground

Sewerage & Drainage application as per EN:13476-3

56 (manufacture with Anti-roadent Chemical) including all

local and central taxes, transportation, freight charges,

octroi, inspection charges, loading, unloading,

conveyance to the departmental stores etc. complete. (ID

Dia) (GWSSB SOR 2022-23 (revised) Section 1A item

no. 05 on Page no. 33)

Lowering, laying and jointing of class SN 8 structured wall

( External Annular Corrugated & Smooth Internal

surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of

pipes, sliding over the elastomeric sealing rubber ring

placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench, laying on

the lower bedding (constructed at bottom of trenches) at

57 prescribed gradient, depth & alignment, testing the water

tightness of the joints, ensuring the continuity tests of

specified pipe segments etc. complete as per drawing,

specifications & detailed engineering, including carriage

of pipes & fittings from site stacks to the place of laying

etc. as per direction of Engineer-in-charge. (GWSSB

SOR 2022-23 (revised) Section 1B item no. 10 on Page

20.00 100 mm dia 21.00 Rmt

30.00 200 mm dia 33.00 Rmt

5.00 250 mm dia 42.00 Rmt

60.00 300 mm dia 62.00 Rmt

40.00 400 mm dia 80.00 Rmt

5.00 500 mm dia 106.00 Rmt

5.00 600 mm dia 131.00 Rmt

Total Estimated Tender Rs.